Scribd
Upload
61 views3 pages

TDS Plantapon ACG 50 - TI - REV5-2 PDF

Uploaded by

aperluna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views3 pages

TDS Plantapon ACG 50 - TI - REV5-2 PDF

Uploaded by

aperluna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Technical Information

Valid since 22.10.2024


Plantapon® ACG 50 Revision 5.2
WF-No. 28332
PRD 30533402 Page 1 of 3

® = registered trademark of BASF in many countries ™ = Trademark of BASF Care Chemicals

Anionic Surfactant

INCI name(s)
Sodium Cocoyl Glutamate
(for INCI - declaration in formulations at pH < 8)

Disodium Cocoyl Glutamate


(as delivered)

Chemical description
Disodium Cocoyl Glutamate

Physical form:
Slightly yellowish clear liquid with a characteristic odor

CASR-No. Ingredient Remark


68187-32-6 Sodium Cocoyl Glutamate (in formulations at pH
< 8)
68187-30-4 Disodium Cocoyl Glutamate (as delivered)

Characteristic values
The specifications stated in the paragraphs 'Quality control data' and 'Additional product descriptive data' finally
and conclusively describe the properties of the product.

Quality control data


(Data which is used for quality release and is certified for each batch.)

Test property Specification Test method


Appearance at room temperature Corresponds to the standard Internal method 930006
(turbidities may occur during cold
storage, to recover see additional
information)
Odor Corresponds to the standard Internal method 930007
Water 43.5 - 45.5 % ISO 4317
1,2-Propanediol 4.0 - 7.0 % Internal method 1268
Sodium chloride 5.0 - 7.5 % ISO 4323
pH value (undiluted 20 °C) 9.6 - 10.5 DGF H-III 1
Solid content 47.5 - 52.5 Internal method 1004
Technical Information
Valid since 22.10.2024
Plantapon® ACG 50 Revision 5.2
WF-No. 28332
PRD 30533402 Page 2 of 3

® = registered trademark of BASF in many countries ™ = Trademark of BASF Care Chemicals

Storage information

Shelf life
12 months

Storage temperature
Between + 5 °C and + 40 °C

Storage conditions
In original sealed containers and protected from moisture

Additional information
Plantapon® ACG 50 should not be exposed to low temperatures for longer times. The product is clear liquid
at temperatures above + 5 °C. During storage time at lower temperatures turbidities can occur which are
reversible through stirring at room temperatures.
Depending on the temperature, the pH value may increase during storage but the product quality is not
negatively influenced. Higher pH values exceeding 11.4 should be carefully avoided by proper storage
conditions.

Stabilising additives / Auxiliaries


Preservatives
not present

Antioxidants
not present

Solvents
1,2-Propanediol

Others
not present

General information
Raw material basis
Vegetable: (coconut / palm kernel oil, sodium glutamate)
Inorganic: (sodium hydroxide)
Technical Information
Valid since 22.10.2024
Plantapon® ACG 50 Revision 5.2
WF-No. 28332
PRD 30533402 Page 3 of 3

® = registered trademark of BASF in many countries ™ = Trademark of BASF Care Chemicals

Composition hints for finished product label


INCI Components
INCI Name (US/EU/CN) Content
Sodium Cocoyl Glutamate * 40 - 50 %
* Disodium Cocoyl Glutamate as delivered
* Sodium Cocoyl Glutamate for INCI-declaration in formulations at pH < 8

Auxiliaries
INCI Name (US/EU/CN) Content
Propylene Glycol 4-7%

Water Content Content


43.5 - 45.5 %

Product properties
Solubility
Ethylether: very slightly soluble
Petrolether: very slightly soluble
Ethylalcohol: very soluble
Paraffin oil: practically insoluble
Water: very soluble

Intended for use as cosmetic ingredient

Disclaimer
This document, or any answers or information provided herein by BASF, does not constitute a legally binding obligation of BASF. While the descriptions,
designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many
factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to
use. It does not relieve our customers from the obligation to perform a full inspection of the products upon delivery or any other obligation.NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS,
DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE
DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.

You might also like