GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN NO. DECRIPTION DATE

MASTER-BEDROOM

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

CLIENT:
-
PROJECT:
-
LOCATION:
-
DRAWING TITLE:
-
Architecture Plan
SHEET
-
DATE:

SCALE:
-
1
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
wash dish WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
sink
machine washer FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.
fridge

fridge
REVISIONS:

NO. DECRIPTION DATE

-oven fridge
-microwave

CLIENT:
-
PROJECT:
-
LOCATION:
-
DRAWING TITLE:
-
Furniture Plan
SHEET
-
DATE:

SCALE:
-
2
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
wash dish WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
sink
machine washer FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.
fridge

fridge
REVISIONS:

NO. DECRIPTION DATE

-oven fridge
-microwave

CLIENT:
-
PROJECT:
-
LOCATION:
-
DRAWING TITLE:
-
Ceiling Plan -
SHEET
DATE:

SCALE:
-
3
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
led light led light CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

NO. DECRIPTION DATE

led light led light

led light

points for
led profile
APPLIQUE
H=180cm

led light
led light led light led light

CLIENT:
-
PROJECT:
-
LOCATION:
-
DRAWING TITLE:
-
Ceiling & Wall Lighting Plan -
SHEET
DATE:

SCALE:
-
4
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
led light led light CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
dish
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
wash
machine
sink washer WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
H=120cm FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
H=45cm H=45cm H=45cm H=45cm H=45cm H=45cm
H=45cm 7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
H=120cm fridge
CONSULTANT APPROVAL BEFORE EXECUTION.
H=120cm

H=45cm

H=70cm H=120cm fridge

REVISIONS:

NO. DECRIPTION DATE

H=120cm
H=45cm

H=120cm H=120cm

led light-oven fridge

led light
-microwave

led light
H=45cm

H=45cm H=45cm H=45cm H=45cm

H=45cm H=45cm
H=45cm H=45cm
- ALL SOCKETS HEIGHT AT 45cm
FROM FINISHING.
- OTHER HEIGHTS MENTIONED.
H=120cm

SOCKET
TV

points for
led profile
APPLIQUE
H=180cm H=45cm H=45cm H=45cm POWER SOCKET
SUCTION
H=45cm

led light
led light led light led light SHUTTER
TELEPHONE
DATA ENTRY
T.V. ENTRY
USB ENTRY

DRAWING TITLE:
-
DRAWING TITLE:
-
DRAWING TITLE:
-
DRAWING TITLE:
-
SHEET
-
DATE:

SCALE:
-
5
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
led light led light CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
wash
sink
dish 2 6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
machine washer
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
1 1 FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
1 1 fridge
8 7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
6 7 CONSULTANT APPROVAL BEFORE EXECUTION.
1 1 1 1
fridge

2 2 2 2 REVISIONS:

1 NO. DECRIPTION DATE

3 3 3

1 1 1 1
3 2 2 2 2
1 1
1.3.4

led light-oven led light

-microwave
fridge 6 7
3
10.11.12 5
1 1.2.3
led light 7.8.9
4.5.6
4 1.2.3 12 11 12 11 12 11 10.11.12 2 2 2
12 11 11
1.3.4 7.8.9 2
4.5.6
10 10 10 10 1.2.3 - ALL SWITCHES HEIGHT AT 120cm.
4 4
- OTHER HEIGHTS MENTIONED.
4 4 - ALL HEIGHTS FROM FINISHING.
points for
led profile
1 2 2 2 2 ONE GANG,TWO WAYS SWITCH
3 1 APPLIQUE
3 H=180cm

9 5 TWO GANGS,TWO WAYS SWITCH

4 4
led light THREE GANGS,TWO WAYS SWITCH
led light led light led light

ONE GANG,ONE WAY SWITCH

TWO GANGS,ONE WAY SWITCH

SWITCHES PLAN
THREE GANGS,ONE WAY SWITCH

DRAWING TITLE:
-
DRAWING TITLE:
-
DRAWING TITLE:
-
DRAWING TITLE:
-
SHEET
-
DATE:

SCALE:
-
6
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

NO. DECRIPTION DATE

RC.C.L
(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
F.F.L DRAWING TITLE:
(+10)cm -
RC.G.L DRAWING TITLE:
(+0)cm -
DRAWING TITLE:
-
RECEPTION SHEET
SECTION (1) -
DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

NO. DECRIPTION DATE

RC.C.L
(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
F.F.L
(+10)cm DRAWING TITLE:
-
RC.G.L
(+0)cm DRAWING TITLE:
-
DRAWING TITLE:
RECEPTION -
SECTION (2) SHEET
-
DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

NO. DECRIPTION DATE

RC.C.L
(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
F.F.L
(+10)cm DRAWING TITLE:
-
RC.G.L
DRAWING TITLE:
(+0)cm -
DRAWING TITLE:
-
RECEPTION SHEET
SECTION (3) -
DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

NO. DECRIPTION DATE

RC.C.L
(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
F.F.L DRAWING TITLE:
(+10)cm -
RC.G.L DRAWING TITLE:
(+0)cm
-
DRAWING TITLE:
-
RECEPTION SHEET
-
SECTION (2) DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:
RC.C.L
(+300)cm NO. DECRIPTION DATE

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
DRAWING TITLE:
F.F.L -
(+10)cm
DRAWING TITLE:
-
RC.G.L
(+0)cm DRAWING TITLE:
-
SHEET
-
KITCHEN
SECTION (1)
DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:
RC.C.L
NO. DECRIPTION DATE
(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
F.F.L DRAWING TITLE:
-
(+10)cm
DRAWING TITLE:
RC.G.L -
(+0)cm
DRAWING TITLE:
-
SHEET
KITCHEN -
SECTION (2)
DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

RC.C.L NO. DECRIPTION DATE

(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
DRAWING TITLE:
F.F.L -
(+10)cm
DRAWING TITLE:
RC.G.L -
(+0)cm
DRAWING TITLE:
-
SHEET
KITCHEN -
SECTION (3)
DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

NO. DECRIPTION DATE

RC.C.L
(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
F.F.L
(+10)cm
-
RC.G.L DRAWING TITLE:
(+0)cm -
DRAWING TITLE:
-
KITCHEN
SECTION (2) DRAWING TITLE:
-
SHEET
-
DATE:

SCALE:
-
14
 GENERAL NOTES

1. ALL DIMENSIONS ARE IN METERS UNLESS OTHERWISE STATED.

2. VERIFY THE ARCHITECT WHENEVER DISCREPANCIES ARE FOUND
BETWEEN DRAWINGS AND SPECIFICATIONS.
3. DO NOT SCALE FROM THIS DRAWING, WORK TO FIGURE
DIMENSIONS ONLY.
4. COMPLETE WORKING DRAWINGS SHALL BE SUBMITTED BY THE
CONTRACTOR FOR CONSULTANT APPROVAL BEFORE
EXECUTION.
5. DRAWING TO BE READ IN CO-ORDINATION AND IN
CONJUNCTION WITH ALL RELEVANT SPECIFICATIONS AND
CROSS DISCIPLINE ENGINEERING DRAWINGS INCLUDING
LANDSCAPING.
6. ALL ELECTRO-MECHANICAL WORKS SHALL BE COORDINATED
WITH ARCHITECTURAL ELEMENTS IN THESE DRAWING (MASONRY,
FLOORING, CEILING, OPENINGS, LIGHTING, ETC.)
7. CONTRACTOR SHALL SUBMIT FINISHING MATERIAL SAMPLES FOR
CONSULTANT APPROVAL BEFORE EXECUTION.

REVISIONS:

NO. DECRIPTION DATE

RC.C.L
(+300)cm

F.C.L
(+286)cm

wash dish
sink washer
machine

fridge

fridge

MASTER-BEDROOM BEDROOM-(1) BEDROOM-(2) KITCHEN

MASTER-BEDROOM

-oven fridge
-microwave

CORRIDOR

MASTER
BATHROOM MASTER
DRESSING
BATHROOM

DRAWING TITLE:
-
F.F.L DRAWING TITLE:
(+10)cm -
RC.G.L DRAWING TITLE:
(+0)cm -
DRAWING TITLE:
-
KITCHEN
SHEET
SECTION (4) -
DATE:

SCALE:
-
14