Issued Oct. 2018 • Index No. AU/12.

Jetline Seam Tracking Systems ® Automation

Accessories

Applications Processes Input Power

Quick Tank and pressure vessel fabrication
Beam and structural assemblies
MIG (GMAW)
Flux-cored (FCAW)
115/220 V, 1-phase, 50/60 Hz .
Power Cord
Specs Pipe and tubing fabrication
Transportation
Submerged arc welding (SAW)
Standard 115 V, 6 ft. (1.8 m)
included on control module
Rail car

Jetline Tactile Seam Tracking systems simplify welding operation, ensuring

the weld head is consistently positioned for optimal arc performance.
Superior tack detection improves
weld quality by compensating
for variation in sizes and shape Packages include:
of weld tacks. Two motorized slides
Seam tracking control module
Programmable slide positions
Seam tracker pendant
simplify operation and reduce
Complete probe assembly
time of locating the weld joint by Two 15-foot motor cables
programming home and weld 15-foot pendant cable
positions. 15-foot probe cable
Multiple joint location options 6 mm probe tip
can be programmed to best adapt
to the workpiece to simplify weld
head positioning. User-friendly pendant layout
with large screen and graphic
Contact closure available from the
backlit display for complete
seam tracker allows the system to
operation, setup and
start and stop the GMAW or SAW
configuration.
process.
Auto and manual modes allow Sturdy bellows protect linear
the system to be used as a guide rails and hardened ball
seam tracker or a motorized screw and nut to ensure
slide system depending upon smooth operation.
weld requirements. Travel limit switches and
Heavy-duty motorized slides electronic overload protection
provide 330-pound (150 kg) payload protect slides from damage
capacity at 15.7 inches (400 mm). during operation.
Available in 5.9 inch (150 mm) and
9.8 inch (250 mm) stroke lengths.

Slide Specifications (Subject to change without notice.)

Stock No. Input Power Length Width Depth Net Weight Face Mounting Pattern
JMS150 24 VDC, 8 A per axis 21.95 in. (557.5 mm) 16 in. (406.5 mm) 4.25 in. (108 mm) 35 lb. (15.9 kg) 5.9 x 5.9 in. (150 x 150 mm)
JMS250 (supplied from control box) 26.47 in. (672.3 mm) 16.14 in. (410 mm) 4.25 in. (108 mm) 37 lb. (16.9 kg) M8 mounting holes

Warranted for three years, parts.

Miller Welding Automation Equipment Sales MillerWelds.com

An ITW Welding Company Phone: 630-653-6819
281 E. Lies Rd. Email: [email protected]
Carol Stream, IL 60188 USA
 Motorized Slide Dimensions

L2
JMS150 JMS250
L3 L 21.95 in. (557.5 mm) 26.47 in. (672.3 mm)

W L2 17.13 in. (435 mm) 21.72 in. (551.6 mm)

L3 7.09 in. (180 mm) 7.09 in. (180 mm)
W2
W 16 in. (406.5 mm) 16.14 in. (409.9 mm)
MH2
W2 7.09 in. (180 mm) 7.09 in. (180 mm)
D 4.25 in. (108 mm) 4.25 in. (108 mm)

MH1 D2 2.36 in. (60 mm) 2.36 in. (60 mm)

L MH1 5.9 in. (150 mm) 5.9 in. (150 mm)
MH2 5.9 in. (150 mm) 5.9 in. (150 mm)
D2
D Hole M8 mounting holes M8 mounting holes
Pattern

Control Module Specifications (Subject to change without notice.)

Stock No. Power Cable Input Power Length Width Depth Net Weight Mounting Holes
JTST9700 115 V, 6 ft. (1.8 m) 115 / 220 V, 1-phase, 12.25 in. 15.5 in. 8.2 in. 29 lb. (13.2 kg) 5.9 x 5.9 in. (150 x 150 mm)
included 50/60 Hz, 10 A (311.2 mm) (393.7 mm) (208.3 mm) .315 in. (8 mm) diameter thru-holes

Pendant Control

2 AUTO/MAN
1. Four-line LCD Display
3 6 2. Mode of Operation (Auto / Manual)
JOG/NAV ADJUST
3. Jog / Nav (changes function of joystick)
4 4. Navigation and Jog Controls
5. Start
7 6. Adjustment Knob
5 8 7. Stop
START STOP TACK

8. Tack (Manual mode)

9 9. Emergency Stop
E-STOP

Specifications (Subject to change without notice.)

Stock No. Input Power Length Width Depth Net Weight Mounting Hole
9780STP 12 VDC at 2.5 A 12.95 in. (329 mm) 5 in. (127 mm) 2.56 in. (65.1 mm) 4 lb. (1.8 kg) .315 in. (8 mm) diameter
(supplied from control box) thru-hole

2
 Pendant Control Operation and Programs
Modes of Operation Program Options
Auto mode — Auto mode allows seam tracker Slide movement When connected with a Jetline® 9700T
to automatically track the joint on a wide variety Up/down Control speed of weld from seam tracker
of parts. The tactile probe provides feedback to Left/right pendant
the motorized slides to keep the weld head in Diagonal
the desired position during the welding process. When interfaced with a Auto-Continuum™
Seam tracker Change weld schedule
Manual mode — Manual mode allows the Programmable start/find joint location Jog wire
operator to manually control the weld-head Multiple joint locating options Purge gas
position using the joystick on the pendant. Contactor to enable power source
Track seam/joint
Auto tack detection
Programmable end of weld
Programmable return to home

Probe Assembly Dimensions

6 mm
probe tip
shown

1.18 in.
(30 mm)

2.82 in. 8.16 in.

(71.62 mm) (207.38 mm)

Accessories
Recommended Spare Parts
Probe Extension
JTST100PE 100 mm

Replacement Probe Shaft (Break Away)

JTSTPRS01
Probe Tips
JTSTPT3 3 mm probe ball
JTSTPT6 6 mm probe ball
JTSTPT10 10 mm probe ball
JTSTPT15 15 mm probe ball
JTSTPT20 20 mm probe ball Extension Rods Probe Insulator JTSTPTI
JTSTPT30 30 mm probe ball JMS115R 115 mm
JMS200R 200 mm Replacement Probe Shaft End Screw
JMS300R 300 mm JTSTPRS02
Extension rods define distance between torch
holder and probe. Standard system includes
200 mm rod.
Copper Wheel Probe
JTSTPTWH

3
 Ordering Information (Order from Miller Welding Automation.)
Equipment Stock No. Description Qty. Price
Dual-Axis Seam Tracking System Packages JTST150XP 5.9 x 5.9 in. (150 x 150 mm)
JTST250XP 9.8 x 9.8 in. (250 x 250 mm)
Accessories
Ball Probes JTSTPT3 IGP03 3 mm
JTSTPT6 IGP06 6 mm
JTSTPT10 IGP10 10 mm
JTSTPT15 IGP15 15 mm
JTSTPT20 IGP20 20 mm
JTSTPT30 IGP30 30 mm
Copper Wheel Probe JTSTPTWH
Probe Extension JTST100PE 100 mm
Extension Rods JMS115R 115 mm
JMS200R 200 mm
JMS300R 300 mm
Recommended Spare Parts
Replacement Probe Shaft (Break Away) JTSTPRS01
Probe Insulator JTSTPTI
Replacement Probe Shaft End Screw JTSTPRS02

Date: Total Quoted Price:

Distributed by:

© 2018 Miller Electric Mfg. LLC