PowerFlow - Performance Report Ver. 1.18.1.

0 Page 1 of 2

Customer/End-user: ID#: 25006-02820-15301-08848-45704

Site Location: Case #: N/A
Engineer: Date: 12/17/2024, 1:47 PM

Application Data High Speed FS604 Driver Data Site Data

Unit Flow 1.09 MMscfd Rated Power 4800.0 HP Manufacturer Waukesha Elevation 3000.0 ft
Load per Flow 351.85 HP/MMscfd Stroke 6.000 in Model L5794GSI Atm. Pressure 13.17 psiA
Lubrication Lubed Rated Speed 1200 RPM Rated Power 1380.0 HP Ambient Temp 80.0 ° F
Rod Diameter 2.500 in Rated Speed 1200 RPM Gas Method AGA8
Unit Load 383.1 HP Max Rod Load Comp 60000.0 lbf Avail. Power 931.5 HP Base Pressure 14.696 psiA
Avg. Piston Vel. 850.00 ft/min Max Rod Load Tens 57000.0 lbf Derate 0.00 % Base Temp. 60.0 ° F
Type Gathering Max Rod Load Gas 65000.0 lbf Run Speed 850 RPM Auxiliary Load 65.0 HP
CONCERNS Warning: Flow Balance Issue! (liquids likely forming, try ProSim)
Project Notes
Case Notes N/A
Order Status

Stage/Service Data Stage 1 Stage 2 Stage 3 Stage 4

Flow Rate MMscfd 1.000 1.090 1.090 1.090
Load HP 93.80 86.70 80.00 80.00
Specific Gravity - 0.648 0.648 0.648 0.648
K Value (Cp/Cv) - 1.2418 1.2404 1.2416 1.2404
Zs - 0.9982 0.9948 0.9844 0.9564
Zd - 0.9979 0.9939 0.9826 0.9601
Suction Press. psiG 2.00 32.08 124.36 379.50
Ps@Flange psiG 1.85 32.08 124.36 379.50
Pd@Flange psiG 33.44 128.49 387.36 1212.13
Discharge Press. psiG 32.08 124.36 379.50 1200.00
Compress. Ratio - 3.1039 3.1305 2.9123 3.1204
Ts/Adiab. Temp. °F 115.0/256.8 120.0/263.5 120.0/254.0 120.0/263.0
Cooler Temp. °F 120.0 120.0 120.0 120.0

Cylinder Data Stage-1 Stage-2 Stage-3 Stage-4

Model 07 Series 06 Series 06 Series 89 Series
Throw ID# - Throw-3 Throw-1 Throw-4 Throw-2
Operating - SACE SACE SACE SACE BLANK BLANK
Mode
Bore in 22.500 14.500 8.750 5.750
MAWP psiG 250.00 635.00 1800.00 2200.00
RDP psiG 225.00 577.00 1636.00 2000.00
Tail Rod Dia in 0.000 0.000 0.000 0.000
Head End °F n/a / n/a n/a / n/a n/a / n/a n/a / n/a
Tsi/Td
VVCP Open in / Turns 0.00 : 0 0.00 : 0 0.00 : 0 0.00 : 0
Base Clr % n/a n/a n/a n/a
Added Clr % n/a n/a n/a n/a
Total Clr % n/a n/a n/a n/a
Vol. Eff. Ps / Pd %/% n/a/n/a n/a/n/a n/a/n/a n/a/n/a
Q-Value Ps / Pd n/a / n/a n/a / n/a n/a / n/a n/a / n/a
Flow MMscfd n/a n/a n/a n/a
Crank End °F 124.2/281.0 127.0/287.6 125.0/278.0 124.5/287.2
Est.Td
Base Clr % 8.20 19.37 25.50 28.18
Added Clr % 0.00 0.00 0.00 0.00
Total Clr % 8.20 19.37 25.50 28.18
Vol. Eff. Ps / Pd %/% 81.12/32.58 65.34/26.03 60.40/25.52 53.75/21.62
Q-Value Ps / Pd % 5.88/4.56 2.19/1.70 2.80/2.40 1.56/1.20
Flow MMscfd 1.00 1.09 1.10 1.11
Valve Spacers HE#/CE# 0 / 0 0 / 0 0 / 0 0 / 0
Rod Loads
Gas-Compress. % 1.2 0.8 1.7 3.3
Gas-Tension % 20.9 24.2 22.5 24.6
Combined-Comp % 28.3 19.1 20.0 17.2
.
% 48.5 44.6 47.4 41.6

Combined-Tens.
Pin Reversal Deg/Mag% 162/61 144/45 156/44 146/44
Throw Loading HP 93.8 86.7 80.0 80.0
BOLD = Out of Limit
Cooper Machinery Services, its owners, affiliates, authorized distributors or agents assume no liability for any consequences, damages or loss of production as a result of use or misuse of the information or calculations contained in this program.
 Page 2 of 2
PowerFlow - Omissions, Exceptions and Overrides
Customer/End-user: ID#: 25006-02820-15301-08848-45704
Site Location: Case #: n/a
Version: 1.18.1.0
Date: 12/17/2024, 1:47 PM

Application Type: Gathering

Location:
Project Status: Other
Gas Concerns:
Legacy Components Used: YES. Contact Cooper.
End Unloaders Used:
TR & S Required: (Technical Regulations and Standards)
Other:

Normal Used
Maximum Allowed Discharge Temperature: 350 degF 350
Minimum Allowed Suction Volumetric Efficiency: 15 % 15
Minimum Allowed Discharge Volumetric Efficiency: 10 % 10
Minimum Allowed Degrees of Pin Reversal: 60 deg 60
Minimum Allowed Opposite Force for Pin Reversal: 10 % 10

Frame Overrides: Stroke (in):

Max Non-lube Speed (rpm):
Rod Diameter (in):

Throw/Cyl. Overrides: Throw #1 Throw #2 Throw #3 Throw #4 Throw #5 Throw #6 Throw #7 Throw #8
Distance Pieces: 1 1 1 1
HE Bore Diameter (in):
Added HE Clr. (%):
HE MAWP (psiG):
HE Tail Rod Diam. (in):
CE Bore Diameter (in):
Added CE Clr. (%):
CE MAWP (psiG):
Valves: HE-Suction: Review Review Review Review
Valves: HE-Discharge:
Valves: CE-Suction:
Valves: CE-Discharge: