THERMO-REFLECT® is a ready-to-use, water- THERMO-REFLECT® is very easy to apply and

based thermal insulation coating that increases the does not require any special hardware.
thermal comfort of buildings for domestic or THERMO-REFLECT® adheres to all types of
professional use in summer and winter. materials: concrete, wood, metal, stone, plastic,
THERMO-REFLECT® is formulated from acrylic brick...
resins in aqueous phase and hollow microspheres THERMO-REFLECT® can be applied outside, on
of a few microns which give it innovative and facade or roof but also inside to achieve an ITI
effective characteristics of comfort and thermal without thermal bridge and without encroaching on
protection. the living area.
THERMO-REFLECT® reduces the energy costs of Applied outdoors, THERMO-REFLECT® has
buildings and allows you to savings of up to 40%. excellent resistance to attacks (polar cold or extreme
heat waves, humidity, pollution, dust, dirt of all
kinds...). Its exclusive formulation also provides it with
algaecide and fungicide protection.
In hot weather, THERMO-
REFLECT®, thanks to its Insensitive to UV, THERMO-REFLECT® does not
reflective power, returns most turn yellow, does not degrade over time. It has a
of the solar radiation to the longer life than traditional coatings.
atmosphere and prevents heat
from entering the building.
Applied indoors, THERMO-REFLECT® cancels the
cold wall effect and prevents condensation of the
water vapor present in the air.
In the cold period, THERMO-
3 in 1, THERMO-REFLECT® makes it possible to
REFLECT®, thanks to its beautify, strengthen the thermal insulation and
insulating power, slows down regulate the humidity of your building in a single
the propagation of cold in the operation.
heart of materials and retains
the heat accumulated in the
building.
 THERMAL
WATERPROOF BREATHABLE REFLECTIVE INDOOR OUTDOOR
INSULATION

• Energy saving: Reduced heating and cooling

Characteristic Value Accuracy
costs up to
40%. Resin type Acrylic in
aqueous phase
• Ease of application: THERMO-REFLECT® is Appearance Liquid
applied like a classic paint, without any specific
material. Appearance of
the film Satin

• THERMO-REFLECT® is suitable for all types of Pot-like

climates and temperatures. appearance Semi-thick
®
• THERMO-REFLECT is resistant to water,
Reflective
snow, ice, hail, sun and wind and provides YES Report CSTB EMI20-260 84 845

protection 12 months of the year. Insulating YES Report CSTB EMI20-260 84 845
• Variable permeability: Waterproof, THERMO-
REFLECT® is nevertheless “breathable” and Anti-humidity YES Report CSTB EMI20-260 84 845

thus allows the evaporation of water vapor and

moisture. Airtight YES Report CSTB EMI20-260 84 845

• Exceptional durability: UV-insensitive, Color White

8 colors available.
Color Chart on request.
THERMO-REFLECT® does not turn yellow,
does not degrade over time. Density 0.9 +0.05 EN ISO 2811-1:2002
®
• The THERMO-REFLECT composition
prevents the growth and growth of molds and 4 m² /L/ layer
on a smooth
foams, avoiding the need for algaecides. Consumption
support
3 m²/L/layer
Yields may vary depending on
the characteristics of the support.
®
• Soundproof the building: THERMO-REFLECT on support
irregular
reflects sound waves, preventing them from
penetrating the surface. Dry extract in
weight 60% EN ISO 3251: 2019

• When applied to roofing terraces, THERMO-

REFLECT® will withstand stagnant water and Conductivity
thermal
λ= 0.141W /
m.K.
EN12667:2002

ensure that your roof is waterproof. In addition

THERMO-REFLECT® can withstand pedestrian
traffic without losing its efficiency. Compounds
<10 g/L for this
Organic
® product
• THERMO-REFLECT solves thermal bridging Volatile (VOC)
problems and improves interior comfort. Compliant with VOC Directive 2004/4
EC (2010) - (Cat A/i: 140g/L max)
• THERMO-REFLECT® eliminates condensation Emissivity
in humid atmospheres and cold walls. Thermal
91% ASTM C-1371

• Washable finish paint, THERMO-REFLECT® is

Reflectance 83% ASTM C-1549
Solar
easy to clean with water. Index of
solar reflection
• Applied as a reflective roof coating, THERMO- NIS
104.5 ASTM E1980

REFLECT® is eligible for EWC funding SRI After Test

(Certificate of Energy Conservation). QUV at 4000 h
No loss EN ISO 16474-3

Eligible for EWC

(Certificate No loss of NIS after 4000
Yes
of Economy Aging hours
of Energy)
Bucket 15 liters of recycled plastic.
Ranking at BRood T3 NF EN 13501-5
fire
Test of
Testing gridlines: EN ISO 2409:2007
adhesion conforming
 Interest in ITI (INDOOR THERMAL INSULATION).

The high thermal emissivity (91%) and high solar • The insulation properties and performance of
reflection (83%) values of THERMO-REFLECT® THERMO-REFLECT® allow exclusive or
allow it to perform cool roofing. complementary indoor use.
Cool roof technology is the application of a ®
• THERMO-REFLECT can advantageously
reflective, high-emissivity coating on the roof of
replace any finishing paint.
buildings that avoids the absorption of solar
radiation. As the roof remains cooler, the amount of • THERMO-REFLECT® can be tinted with a
heat transmitted into the building is reduced, thus simple universal dye.
maintaining a cooler and more constant indoor
temperature. • THERMO-REFLECT® allows an easy, quick
This process applies to any type of building: and clean work.
commercial, industrial, residential...
• THERMO-REFLECT® makes it possible to
avoid thermal bridges and regulates the
hygrometry of homes.

• THERMO-REFLECT® is washable and easy

to maintain.
• Thanks to its small thickness, THERMO-
REFLECT® avoids the loss of m² of living
space, unlike conventional insulation.
In the summer, THERMO-REFLECT® will keep
buildings cool and achieve significant energy • Its composition in aqueous phase, gives
savings from air conditioning. THERMO-REFLECT® an A+ classification in
indoor use, with practically no release of VOCs
into the atmosphere, accentuating its eco-
virtuous side.

In winter, however, only reflective paints provide no

energy benefit. MEDIA PREPARATION:
®
THERMO-REFLECT , meanwhile, is a reflective Inside :
and insulating coating that allows it to improve the Prepare the media in accordance with DTU 59-1.
thermal comfort of buildings and achieve energy • On already painted backgrounds (old shiny or
savings throughout the year. satin paintings): sanding to break the shine,
washing, rinsing, then letting dry.
THERMO-REFLECT® brings the advantages of
Cool Roof and thermal insulation in one product. Outside :
In accordance with DTU 59-1 and 42.1: the media
shall be healthy, cohesive, clean and dry.

• Oxidizable metals: Remove and treat traces of

rust beforehand.
APPLICATION :
• Product ready to use.
• THERMO-REFLECT® is applied in two layers,
• Homogenize THERMO-REFLECT® before respecting the overlap times, at the rate of:
application.
- 4 m² /L/ layer on smooth support.
• The application temperature should be between
5°C and 35°C. - 3 m² /L/ layer on irregular support.
• Application in two layers while respecting the Either consumption of:
overlap times. - 0.50L for 1 m² for the 2 layers on smooth
1-Manual application with roller: support. (2 m²/L).
- 0.60L for 1 m² for the 2 layers on irregular
Inside :
support. (1.7 m²/L).
For irregular surfaces, use rollers
with long bristles, greater than 15
mm. A 15L bucket of THERMO-REFLECT®
covers from 25 to 30 m².
For smoother surfaces, use short
bristle rollers (15-5 mm).
• For a stretched result, use a short-haired roller
to apply the second layer.
Outside :
Use a 18 mm Polyamide Facade
Wick type roller.

2 Airless App :
Dilution with 10% water maximum.
Blue nozzle 523. Working
pressure 180 bars.
• Store away from freezing and heat in a dry
place: temperature between 5°C and 30°C.
• Apply the product in 2 successive crossed
passes without loading. • Maximum storage time: 1 year in the original
package.
DRYING TIME:

Drying time 5°C 20°C 30°C • Product classified as non-hazardous.

• Consult the Safety Data Sheet before use.
Touch Dry 1 hr 30mm 20mn • Store away from freezing.
Layer Overlay • Do not apply if rain or frost is expected within 48
24 hours 6 am 4 hours
supplementary hours.
Re-release
24 hours 12 noon 6 am
• Recycle the empty package.
pedestrian

Product made and manufactured in France

Company in Mission for the Environment

Eco Prisme Distribution
9, Rue Antoine Jans L-1820 Luxembourg
R.C.S Luxembourg: B 281.145
E-mail [email protected]