Data communication systems

Bus system PROFIBUS-DP/FMS/FIP • Fixed Installation

ÖLFLEX®
UNITRONIC® BUS PB

UNITRONIC®
PROFIBUS cables for fixed applications

Info

• Lapp Kabel is a member of the

PROFIBUS User Organisation (PNO)
• A for Advanced
here: UL and CSA certifications

ETHERLINE®
• CPR: Article number choice under
www.lappkabel.com/cpr

HITRONIC®
Application range Norm references / Approvals Technical data
• For fixed installation • In accordance with DIN 19245 and
Maximum electromagnetic screening EN 50170, e.g. for SIEMENS SIMATIC Classification ETIM 5/6
• Dry or damp rooms NET, also suitable for FIP (Factory ETIM 5.0/6.0 Class-ID: EC000830
Instrumentation Protocol) ETIM 5.0/6.0 Class-Description: Data
• Item nos. 2170233, 2170333, 2170820,
• See below for UL certification type cable
2170824, 2170826 are all UV-resistant
Mutual capacitance
Product features Product Make-up (800 Hz): max. 30 nF/km

EPIC®
• These bus cables can be used for • FC: Fast Connect cable design Peak operating voltage
PROFIBUS-DP as well as for PROFIBUS- • P: Polyurethane (not for power applications) 250 V
FMS and FIP H: Halogen-free Conductor resistance
• Based on the bit rates listed, in • PE: polyethylene outer sheath, black (loop): max. 186 Ohm/km.
accordance with PNO specifications the • 7-W: 7-wire, e.g. for applications where see also datasheet
following maximum cable lengths for a bus vibrations occur Minimum bending radius
segment apply

SKINTOP®
• COMBI: Data transmission and Fixed installation: see data sheet
(cable type A, PROFIBUS-DP): power supply in one cable
93.75 kbit/s = 1200 m Test voltage
187.5 kbit/s = 1000 m Core/core: 1500 V rms
500 kbit/s = 400 m Characteristic impedance
1.5 Mbit/s = 200 m 150 ± 15 Ohm
12.0 Mbit/s = 100 m

Number of pairs and conductor

Article number Article designation diameter (mm) Outer diameter [mm] Copper index (kg/km) Weight (kg/km)

SILVYN®
Conventional cable makeup
2170220 UNITRONIC® BUS PB 1 x 2 x 0.64 8 30.1 74
2170233 UNITRONIC® PB PE 1 x 2 x 0.64 8 30.1 57
2170226 UNITRONIC® BUS PB H 7-W 1 x 2 x 0.64 8 30.1 55
2170225 UNITRONIC® BUS PB COMBI 7-W 1 x 2 x 0,64 Ø + 3 x 1,0 mm² 9.8 59 92
Conventional cable makeup - UL/CSA CMX certification
2170219 UNITRONIC® BUS PB A 1 x 2 x 0.64 8 30.1 57
Conventional cable makeup - UL/CSA CMG certification FLEXIMARK®
2170824 UNITRONIC® BUS PB 7-W A 1 x 2 x 0.64 8 30.1 55
Fast Connect
2170333 UNITRONIC® BUS PB PE FC 1 x 2 x 0.64 8 26 67
Fast Connect - UL/CSA CMX certification
2170330 UNITRONIC® BUS PB P FC 1 x 2 x 0.64 8 26 71
Fast Connect cable makeup - UL/CSA CMG certification
2170820 UNITRONIC® BUS PB FC 1 x 2 x 0.64 8 26 84
2170826 UNITRONIC® BUS PB 7-W FC 1 x 2 x 0.64 8 26 67
ACCESSORIES

2170326 UNITRONIC® BUS PB-H FC 1 x 2 x 0.64 8 26 72

Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
SIMATIC NET® is a registered trademark of Siemens AG
Lapp Kabel is a member of the PROFIBUS user organisation (PNO)
Photographs and graphics are not to scale and do not represent detailed images of the respective products.

Similar products Accessories

APPENDIX

• UNITRONIC® BUS PB ROBUST refer to page 330 • Sub-D Bus-Connectors

• UNITRONIC® BUS PB 105 refer to page 331 • FC STRIP stripping tool refer to page 960
• SENSOR STRIP stripping tool refer to page 961

For current information see: www.lappgroup.com 329