04b Practice test set 1 - Paper 1H mark scheme
04b Practice test set 1 - Paper 1H mark scheme
0
Question Working Answer Mark Notes
1. 54 1.296 3 M1 for a complete method with relative place value correct.
24 Condone 1 multiplication error, addition not necessary.
216
1080 OR
1296
M1 for a complete grid. Condone 1 multiplication error,
addition not necessary.
5 4
1 OR
1 2
0 8
2 1 M1 for sight of a complete partitioning method, condone 1
2 4 multiplication error. Final addition not necessary.
0 6
9 6
5 0.4
1 0.08 0.2
0.2 0.016 0.04
B1 72.5
M1 for 20 ÷ 10 (=2) or 10 ÷ 20 (= ) or oe or oe
A1 cao
4. 0.38 × 10−1, 3800 × 10−4, Correct order 2 M1 changing any one correctly or at least 3 in the correct
0.038 × 102, 380 order (ignoring one) or reverse order
5. (a) (4,0) (3, 0) (3, –1) (2, –1) Correct position 2 B2 for correct shape in correct position
(2, 2) (4, 2) (B1 for any incorrect translation of correct shape)
(b) Rotation 3 B1 for rotation
180 B1 for 180 (ignore direction)
(0,1) B1 for (0, 1)
M1 for
M1 for ” ” × 600
(b) Frequency polygon through (2, B2 for a complete and correct polygon (ignore any histograms,
2
8), (7, 11), (12, 9), (17, any lines below a mark of 2 or above a line of 22, but award B1
14) and only if there is a line joining the first to last point)
(22, 18) (B1 for one vertical or one horizontal plotting error
OR for incorrect but consistent error in placing the midpoints
horizontally (accept end points of intervals)
OR for correct plotting of mid-interval values but not joined )
5q = 4 + 3p
A1 q = oe
11. (a) x² − 3x + 5x − 15 x² + 2x− 15 2 M1 for four correct terms with or without signs, or 3 out of no
more than 4 terms with correct signs. The terms may be in an
expression or in a table
OR OR
M1 for (x + 4)²
(x + 4)² − 16 − 9
(x + 4)² = 25 M1 for − 4 ±
x=−4± A1 cao
SC: if no marks score then award B1 for 1 correct root, B3 for
both correct roots.
12. (a) 3t + 1 < t + 12 t < 5.5 2 M1 3t – t < 12 – 1
3t – t < 12 – 1 A1 t < 5.5 oe
2t < 11 (B1 for t = 5.5 or t > 5.5 or 5.5 or t ≤ 5.5 or t ≥ 5.5 on the
answer line)
(b) 5 1 B1 for 5 or ft (a)
15. (a) 25 2 M1 for correct use of frequency density to find a unit of area
(for example 1 cm2 = 2.5 or 1 small square = 0.1) or the area of
16
one block.
A1 cao
(b) Correct black (1cm high 1 B1 for correct black
between 40 and 60)
(b) 1 B1 cao
M1 for
M2 for
(M1 for two of these added)
Or
A1 for oe
E,not E+ C,not C +
H,not H
c=
(b) 75 2
M1 for
A1 for 75 cao
Since ABCD is a
quadrilateral this makes
all four angles 90°, and
ABCD must therefore be
a rectangle.