S1A, S1B, S1D, S1G, S1J, S1K, S1M

www.vishay.com
Vishay General Semiconductor
Surface-Mount Glass Passivated Rectifier
FEATURES
• Low profile package Available

• Ideal for automated placement

• Glass passivated pellet chip junction
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Meets MSL level 1, per J-STD-020,
SMA (DO-214AC)
LF maximum peak of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
Cathode Anode • Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912

LINKS TO ADDITIONAL RESOURCES TYPICAL APPLICATIONS

3D 3D
For use in general purpose rectification of power supplies,
3D Models
inverters, converters and freewheeling diodes for consumer,
automotive, and telecommunication.

MECHANICAL DATA
PRIMARY CHARACTERISTICS Case: SMA (DO-214AC)
IF(AV) 1.0 A Molding compound meets UL 94 V-0 flammability rating
50 V, 100 V, 200 V, 400 V, 600 V,
VRRM Base P/N-E3 - RoHS-compliant, commercial grade
800 V, 1000 V
IFSM 40 A, 30 A Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
EAS 5 mJ
IR 1.0 μA, 5.0 μA Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
VF 1.1 V Base P/NHM3_X - halogen-free, RoHS-compliant and
TJ max. 175 °C AEC-Q101 qualified (“_X” denotes revision code e.g. A,
B,.....)
Package SMA (DO-214AC)
Circuit configuration Single Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity: color band denotes cathode end

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL S1A S1B S1D S1G S1J S1K S1M UNIT
Device marking code SA SB SD SG SJ SK SM
Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current (fig. 1) IF(AV) 1.0 A
Peak forward surge current 8.3 ms single half sine-wave
IFSM 40 30 A
superimposed on rated load
Non-repetitive peak reverse avalanche energy
EAS 5 mJ
at 25 °C, IAS = 1 A, L = 10 mH
Operating junction and storage temperature range TJ, TSTG -55 to +175 °C

Revision: 07-May-2024 1 Document Number: 88711

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 S1A, S1B, S1D, S1G, S1J, S1K, S1M
www.vishay.com
Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL S1A S1B S1D S1G S1J S1K S1M UNIT
Maximum instantaneous
1.0 A VF 1.1 V
forward voltage

Maximum DC reverse current TJ = 25 °C 1.0 5.0

IR μA
at rated DC blocking voltage TJ = 125 °C 50
IF = 0.5 A, IR = 1.0 A,
Typical reverse recovery time trr 1.8 μs
Irr = 0.25 A
Typical junction capacitance 4.0 V, 1 MHz CJ 12 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL S1A S1B S1D S1G S1J S1K S1M UNIT
RθJA 75 85
Typical thermal resistance (1) °C/W
RθJL 27 30
Note
(1) Thermal resistance from junction to ambient and from junction to lead mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
S1J-E3/61T 0.064 61T 1800 7" diameter plastic tape and reel
S1J-E3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel
S1JHE3_A/H (1) 0.064 H 1800 7" diameter plastic tape and reel
S1JHE3_A/I (1) 0.064 I 7500 13" diameter plastic tape and reel
S1J-M3/61T 0.064 61T 1800 7" diameter plastic tape and reel
S1J-M3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel
S1JHM3_A/H (1) 0.064 H 1800 7" diameter plastic tape and reel
S1JHM3_A/I (1) 0.064 I 7500 13" diameter plastic tape and reel
Note
(1)
AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Axis Title
1.2 10000 100
TL = 110 °C
Average Forward Rectified Current (A)

S1A thru S1J

Peak Forward Surge Current (A)

8.3 ms Single Half Sine-Wave

1.0
S1A thru S1J

0.8 1000
2nd line
1st line
2nd line

S1K, S1M 10
0.6
S1K, S1M
0.4 100

0.2
0.2" x 0.2" (5.0 mm x 5.0 mm)
copper pad areas 0
0 10 1 10 100
0 25 50 75 100 125 150 175
Number of Cycles at 60 Hz
Mount Temperature (°C)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

Revision: 07-May-2024 2 Document Number: 88711

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 S1A, S1B, S1D, S1G, S1J, S1K, S1M
www.vishay.com
Vishay General Semiconductor

Axis Title
10000 100
TJ = 175 °C TJ = 25 °C
10 f = 1.0 MHz
Instantaneous Forward Current (A)

Vsig = 50 mVp-p

Junction Capacitance (pF)

TJ = 125 °C
1000
1

2nd line
1st line
2nd line

TJ = 75 °C 10

TJ = 25 °C 100
0.1

TJ = -40 °C

1
0.01 10 0.01 0.1 1 10 100
0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Reverse Voltage (V)
Instantaneous Forward Voltage (V)

Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance

Axis Title
1000 10000 1000

Transient Thermal Impedance (°C/W)

TJ = 175 °C
Instantaneous Reverse Current (µA)

100
S1K, S1M
100
10 1000
2nd line
2nd line

TJ = 125 °C
1st line

1
S1A thru S1J
TJ = 75 °C 10
0.1 100
TJ = 25 °C Units Mounted on
0.20" x 0.20" (5.0 mm x 5.0 mm)
0.01 x 0.5 Mil. Inches (0.013 mm)
TJ = -40 °C Thick Copper Land Areas
1
0.001 10 0.01 0.1 1 10 100
10 20 30 40 50 60 70 80 90 100
t - Pulse Duration (s)
Percent of Rated Peak Reverse Voltage (%)

Fig. 4 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Transient Thermal Impedance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

SMA (DO-214AC)

Cathode Band
Mounting Pad Layout

0.066 (1.68) 0.074 (1.88)

MIN. MAX.
0.065 (1.65) 0.110 (2.79)
0.049 (1.25) 0.100 (2.54)

0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
0.012 (0.305)
MIN.
0.006 (0.152)

0.208 (5.28)
0.090 (2.29) REF.
0.078 (1.98)

0.060 (1.52)
0.030 (0.76) 0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)

Revision: 07-May-2024 3 Document Number: 88711

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Vishay products are not designed for use in life-saving or life-sustaining applications or any application in which the failure of
the Vishay product could result in personal injury or death unless specifically qualified in writing by Vishay. Customers using or
selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized
Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2025 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 01-Jan-2025 1 Document Number: 91000

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000