Exam - 02 (60 Minutes)

Pass Criteria
13/25, 14/27
1
2
3
Question # 01
Question 01.1 –
What are the internal forces in section {1-1}
{axial, shear & moment} if the section is 2
m form the free end?
A. 10, 10 & 20
B. 10, zero & 20
C. zero, 10 & 20
D. zero, zero & 20

Question 02.2 –
What are the internal forces in section {2-2}?
{axial, shear & moment} if the section is 2
m form the free end?
A. zero, zero & 20
B. zero, 10 & 20
C. 10, zero & 20
D. 10, 10 & 20
4
Question 01.3–
What are the internal forces in section {3-3}
{axial, shear & moment} if the section is 2
m form point {C}?
A. 10, zero & 40
B. zero, 10 & 40
C. 10, 10 & 40
D. zero, zero & 40

Question 01.4 –
What are the internal forces in section {4-4}
{axial, shear & moment} if the section is 2
m form the fixed end?
A. zero, zero & 80
B. 20, 20 & 80
C. 20, zero & 80
D. zero, 20 & 80
5
Question 01.5 –
What is the maximum design wind load which
keep the structure stable?
A. 2.25 t/m
B. 1.65 t/m
C. 1.90 t/m
D. 5.35 t/m

6
Question # 02
In the beam loaded as shown what is
location of which zero shear force is
located?
A. 10 ft from left support
B. 14 ft from left support
C. 17.5 from left support
D. 15 ft from left support

Question # 03
What is the maximum moment in the
shown loaded beam?
A. 239 kips ft
B. 325 kips ft
C. 288 kips ft
D. 128 kips ft

7
Question # 04
The frame shown in the figure have a
rigid support at {A} and hinged support at
{D} What is the most nearly reaction at
support {D}:
A. 20 kips
B. 32 kips
C. 40 kips
D. 36 kips
Question # 05
In the frame shown in the figure what is
the moment at {C} if it {C} is in the
middle of {BD}:
A. - 160 KN m
B. - 40 KN m
C. +160 KN m
D. + 40 KN m
Question # 06
What are the internal forces {axial, shear
& moment} the section {1-1}?
A. zero, 1.66, 4.98
B. 1.66, zero & 6.68
C. zero, 1.66 & 6.68
D. zero, zero & 4.98

Question # 07
What is the force in member?
{AB}?
A. +188.87 kips
B. - 166.67 kips
C. + 166.67 kips
D. - 188.87 kips

9
Question # 08
Determine all the forces in all
members for the truss shown
in the figure?

Question # 09
Determine all the forces in all
members for the truss shown
in the figure?

10
Question # 10
Determine all the forces in all
members for the truss shown
in the figure?

Question # 11
Determine all the forces in
all members for the truss
shown in the figure ?

Answers 11
11
Question # 12
Determine all the forces in
all members for the truss
shown in the figure ?

Answers # 12
Question # 13
Determine all the forces in
all members for the truss
shown in the figure ?

Answers # 13

12
Question # 14

Answers # 14
13
Question # 15

14
Question # 16

Question # 17
While working in final stages of a job, You noticed that a small clause in the
contract has been violated accidently, What should you do ?
Tell the client about the discrepancy and ask him/her/them what to do ?
Look for a loophole in the contract that would enable you to avoid re-doing the work.
Don’t worry about it, Let your boss or the client worry about it later, If it’s important…
they will address the subject.
Fire the person who caused the contract.

15
Question # 18
Value engineering can be described as
A. Reducing cost by reducing quality
B. Getting the best value for the least cost
C. Reducing scope to achieve budget
D. Reorganizing the project team to achieve the greatest efficiency
Question # 19
The intersection of WBS and OBS is the
A. Responsibility matrix
B. Functional matrix
C. Cost account
D. Sub-deliverable
E. Project overlap
Question # 20
The lowest element in hierarchical breakdown of WBS is
A deliverable
A work packages
A cost accounts
A lowest sub-deliverable
An object
None of above
16
Question # 21
Use AOA method and define the total project duration :-
A. 9 Days
B. 8 Days
C. 10 Days
D. 11 Days

17
Question # 22
Using the PDM what is total float for activity {D}
A. 2 Days
B. 3 Days
C. 4 Days
D. 5 Days

18
Question # 23

Use AOA method and define the total project duration :-

19
Question # 24
The Work Breakdown Structure can BEST be thought of as an
effective aid for communications.
A. Team
B. Project manager
C. Customer
D. Stakeholder

Question # 25
During project executing, a team member comes to project
manager because he is not sure of what work needs to be
accomplished on the project. Which of the following documents
contains the detailed description of work packages?
A. WBS dictionary.
B. Activity list.
C. Schedule baseline.
D. Scope definitions.
20
Question # 26
A detailed project schedule can be created only after creating
the:
A. Project budget.
B. Work breakdown structure.
C. Scope baseline
D. Detailed risk assessment.

Question # 27
You are a civil engineer who has never managed a work package
in project before. It would be BEST in this situation to rely on
during planning in order to improve your chance of
success.
A) Your intuition and training
B) Stakeholder analysis
C) Historical information
D) Configuration management
21
 Question # Correct Answer
1 As Shown in the Class
2 D
3 C
4 A
5 B
6 C
Answers 7 B
8 will solve in the Class
9 will solve in the Class
10 will solve in the Class
11 Given
12 Given
13 Given
14 Given
15 will solve in the Class
16 D
17 A {Will Discuss Again}
18 C
19 A
20 B
21 D
22 C
23 D
24 D
25 A
26 C
27 C
22