ELECTRONIC OVEN CONTROL

Control Pad Functions

Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various
functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one shown. This
doesn't change the way it operates.

Note: The oven function will not work if the time of day clock is not set.
Speed Bake Pad- Used Speed Clean Bake Time Up and Down arrow pads- Used along with Clock Pad- Used to
to enter the speed bake Pad- Used to Pad- Used to the function pads to select oven temperature, set the time of day.
mode temperature (some select the speed enter the length cooking time, start time (when programming
Oven Interior Light
models). clean cycle of the baking an automatic start time), time of day, clean
Pad- Used to turn
(some models). time. time and minute timer.
oven interior light ON
Feature indicator and OFF.
lights- These light Clear Pad- Used to
show which clear any function
Speed Bake Oven
feature is in use. Speed Speed Bake Oven previously entered
Bake clean time Clock
bake light except the time of day
and minute timer.
Push Clear pad to
Bake Pad Keep Start Timer Clear stop cooking.
Broil warm Clean time Oven
Used to enter On/Off /Off
the normal Preheat Controls Timer Pad- Used to
baking mode Door Locked set or cancel the
temperature. minute timer. The
minute timer does not
start or stop cooking.
Broil Pad- Used Keep Warm Clean Pad Start Time Pad- Used Oven, Preheat & Lock lights- The "oven" light indicates
to select the Pad- Used to Used to to set the desired start that the oven is functionning. The "Preheat" light will glow
variable broil set the Keep select the time for baking. Can be when the oven is first set to operate, or if the desired
function. Warm feature. self- used with BAKE TIME temperature is reset higher than the actual oven temperature.
cleaning to program a delayed The "Door Locked" light will flash until the door locks when
cycle. bake cycle. the self-clean cycle is in use. It glows constantly after the door
locks (some models).

The oven can be programmed to:

Bake normally, Speed Bake, Keep warm, Time Bake,Delay Start (delayed bake), Broil, Clean and Speed Clean.

Note: Push buttons or pads may be shaped differently.

For a silent control panel:

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold START TIME pad for 7 seconds. "- -" or "SP" appears in the
display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation and silent operation
mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation
mode.
Versión en español
Temperature Conversion (Fahrenheit / Celsius) Si desea obtener una copia en
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. español de este Manual del
The oven can be programmed for any temperature from 170°F to 550°F (77°C to 288°C). Usuario, sírvase escribir a la
dirección que se incluye a
To change the temperature to °C (Celsius) or from °C to °F (control should not be continuación. Solicite la P/N
in a Bake or Clean mode): 318200189E.
1. Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.
2. Press the UP or DOWN ARROW pad to change °F to °C or °C to °F. Spanish Owner's Guides
3. Wait 5 seconds to accept the changes or press CLEAR/OFF pad to accept the changes. Frigidaire Company
P. O. Box 9061
Dublin, Ohio 43017-0961

1 318200189 (0406) Rev. A

Setting the Clock and Minute Timer

Speed Bake Oven

Speed Speed Bake Oven
Bake clean time Clock
bake light

Keep Start Timer Clear

Broil warm Clean time Oven On/Off /Off
Preheat Controls
Door Locked

Note: The time of day must first be set in order to operate the oven.

To set the Clock

When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00".
1. Press the CLOCK pad once (do not hold pad down).
2. Within 5 seconds, push and hold the UP or DOWN ARROW pad until the correct time of day appears in the display.
3. Press the CLOCK pad to accept the new time of day. If the CLOCK pad is not pressed, the timer will return automatically
to the new time of day after 7 seconds.
Note: The clock cannot be changed during any bake, timed bake, delayed time bake, clean cycle, speed clean or delayed
clean cycle.

Changing between 12 or 24 Hour Time of Day Display

1. Press and hold the CLOCK pad for 7 seconds. After 7 seconds, "12Hr" or "24Hr" will appear in the display and the control
will beep once.
2. Press the UP or DOWN ARROW pad to switch between the 12 and 24 hour time of day display. The display will show either
"12Hr" or "24Hr".
3. Wait 5 seconds or press the CLEAR/OFF pad to return to the time of day display.
4. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.

To Set the Minute Timer

1. Press the TIMER ON/OFF pad.
2. Press the UP ARROW pad to increase or DOWN ARROW pad to decrease the time in one minute increments. The timer can
be set for any amount of time from 1 minute to 11 hours and 59 minutes.
3. The display shows the timer count down in minutes if more than 1 hour remains. When less than 1 hour remains, the display
will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will continue to beep 3 times every 8 seconds until the TIMER
ON/OFF pad is pressed.
Note: The indicator light located above the TIMER ON/OFF pad will glow while the minute timer is active.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time
has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with
any other mode, the minute timer will be shown in the display. To view other functions, press the function pad for that mode.
To Cancel the Minute Timer before the set time has run out: Press the TIMER ON/OFF pad.

2
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
To Set or Change the Temperature for Normal or Speed Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 288°C).
To Set the Controls for Normal or Speed Baking:
1. Press the BAKE or SPEED BAKE pad."— — —°" appears in the display.
2. Within 5 seconds, Press the UP or DOWN ARROW pad. The display will show "350°F (177°C)." By holding the UP or DOWN
ARROW pad, the temperature can then be adjusted in 5°F (1°C if control is set to display Celsius) increments.
3. 8 seconds after the UP or DOWN ARROW pad is released, the oven will begin heating to the selected temperature. When
the displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF.
4. To cancel the baking function, press the CLEAR/OFF pad.
To Change the Oven Temperature after Baking has Started:
Press the UP or DOWN ARROW pad to increase or decrease the set temperature.

Speed BakeTM Cooking System (some models)

Speed BakeTM Cooking System uses a fan to circulate the oven’s heat uniformly and
continuously around the oven. This improved heat distribution allows for fast, even cooking and
browning results. It also gives better baking results when using two racks at the same time.
Heated air flows around the food from all sides, sealing in juices and flavors. Meats cooked with
Speed BakeTM Cooking System are juicer. Poultry is crisp on the outside while staying tender
and moist on the inside. Breads and pastry brown more evenly. Most foods baked in a standard
oven can be cooked faster and more evenly with Speed BakeTM Cooking System.
Benefits of Speed BakeTM Cooking System:
- Foods cook up to 30% faster, saving time and energy.
- Two racks can be used with more even cooking and browning.
- No special pans or bakeware needed.
General Cooking Instructions:
1. To convert baking times from normal recipes to Speed Bake times, start with a 30%
reduction in time and increase the time until desired doneness is obtained. Time reductions
will vary depending on the amount and type of food.
2. Preheating is not necessary when cooking with Speed Bake, except with items such as
cakes, cookies, biscuits, breads, etc.
3. When using two racks at the same time, place them in positions 1 and 3 for the best
results.
4. When baking cakes with Speed Bake, set temperature 25°F (13°C) degrees lower than the
recommended setting for best results.
To Set Control for Continuous Bake or 12 Hour Energy Saving:
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11
hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
1. Press and hold the TIMER ON/OFF pad for 7 seconds until a tone is heard.
2. Within 5 seconds, press the UP or DOWN ARROW pad to switch between Continuous Bake and 12 Hour Energy Saving mode.
The display will show either "— — hr" or "12hr".
If "- - hr" appears, the oven will be set to continuous baking. If "12hr " appears, the oven is set to 12 hour energy saving mode.
3. Wait 5 seconds or press the CLEAR/OFF pad to accept the changes.
To Set Control for Oven Lockout (some models):
The control can be programmed to lock the oven door (some models) and/or lock the oven control pads (all models).The Oven
Lockout feature prevents the oven from being accidentally turned on. It does not disable the clock, minute timer or the interior
oven light.
To Set Control for Oven Lockout feature:
1. Press the CLEAR/OFF pad and hold for 3 seconds. The "Door Locked" indicator light will flash and the motor driven door lock
will begin to close automatically. DO NOT open the oven door while the indicator light is flashing. Allow about 15 seconds
for the oven door to lock. Once the oven door is locked, "Loc " will appear in display.
2. To cancel the Oven lockout feature, press the CLEAR/OFF pad and hold for 3 seconds. The control will unlock the oven door
and resume normal operation. 3
Setting Oven Controls (continued)

Speed Bake Oven

Speed Speed Bake Oven
Bake clean time Clock
bake light

Keep Start Timer Clear

Broil warm Clean time Oven On/Off /Off
Preheat Controls
Door Locked

Broil
Broiling is a method of cooking tender cuts of meat by direct heat under the Grid
broil element of the oven. A beep lets you know when the broil temperature is
reached. Be sure you center the broiler pan directly under the broil element for
best results.
Arrange oven rack while oven is still cool. Position the rack as needed.
The broiler pan and its insert allow dripping grease to drain and be kept away
from the high heat of the broiler. DO NOT use the pan without its insert. DO
NOT cover the insert with foil. The exposed grease could ignite.
Should an oven fire occur, close the oven door and turn off the
oven. If the fire continues, throw baking soda on the fire or use a fire
extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and
water can cause a grease fire to spread and cause personal injury.

To set for broiling: Broiler Pan

1. Arrange the oven rack while oven is still cool.
2. Press the BROIL pad. "- -" will appear in the display.
3. Press the UP or DOWN ARROW pad until the desired broil setting level appears
in the display. Press the UP ARROW pad for HI broil or the DOWN ARROW pad
for LO broil. Most foods may be broiled at the HI broil setting. Select the LO broil
setting to avoid excess browning or drying of foods that should be cooked to the
well-done stage.
4. Place the insert on the broiler pan, then place the food on the insert. DO NOT
use the pan without the insert or cover the insert with aluminum foil. The
exposed grease could ignite.
5. Place the pan on the oven rack. Open the oven door to the broil stop
position when broiling. Broil Stop Position
6. Broil on one side until food is browned. Turn and broil food on 2nd side.
Note: Always pull the rack out to the stop position before turning or removing
food.
7. When broiling is finished, press the CLEAR/OFF pad.

To Operate the Oven Light(s)

The interior oven light(s) will automatically turn ON when the oven door is opened.

Press the OVEN LIGHT pad to turn the interior light(s) ON and OFF whenever the door
is closed.
The interior oven light(s) is (are) located at the upper left (and right, some models)
rear wall of the oven interior and is covered with a glass shield held by a wire holder.
The glass shield must be in place whenever the oven is in use. To change the interior
oven light(s), see changing the Oven Light in the General Care & Cleaning section
in the Owner's Guide.

4
Setting Oven Controls (continued)
To Set the Timed Bake and Delay Start Features
The BAKE TIME and START TIME pads operate the features that will turn the oven ON and OFF at the times you select in advance.
The oven can be programmed to start immediately and shut off automatically (Timed Bake) or to begin baking at a later time
with a delayed start time (Delay Start).

Note: During Timed Bake the preheat indicator light will function during the preheat operation.

To Program the Oven to Begin Baking Immediately and To Shut Off Automatically (Timed Bake):
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3. Press the BAKE pad. "— — —°" appears in the display.
4. Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350°F (177°C)". By holding the UP or DOWN
ARROW pad, the temperature can then be adjusted in 5°F increments (1° if the control is set to display Celsius).
5. Wait 8 seconds to accept the temperature.
6. Press the BAKE TIME pad. "0:00" will flash in the display (MIN:SEC) and (HR:MIN) if programmed for more than 60 minutes.
7. Press the UP or DOWN ARROW pad until the desired baking time appears in the display.
8. The oven will turn ON and begin heating.
Note: When the control is set for this function the oven temperature will be displayed. To see the cook time remaining press the
BAKE TIME pad and to see the time of day press the CLOCK pad.

To Program Oven for a Delayed Start Time and to Shut-Off Automatically (Delayed Start Bake):
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3. Press the BAKE pad. "— — —°" appears in the display.
4. Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350°F (177°C)." By holding the UP or DOWN
ARROW pad, the temperature can then be adjusted in 5°F increments (1° if the control is set to display Celsius).
5. Wait 8 seconds to accept the temperature.
6. Press the BAKE TIME pad. "0:00" will flash in the display (MIN:SEC) and (HR:MIN) if programmed for more than 60 minutes.
7. Press the UP or DOWN ARROW pad until the desired baking time appears.
8. Wait 5 seconds for the control to accept the time.
9. Press the START TIME pad. The earliest possible start time will appear in the display.
10. Press the UP or DOWN ARROW pad until the desired start time appears in the display and wait 7 seconds to accept.
11. Once the controls are set, the control calculates the time when baking will start and stop.
12. The oven will turn ON at the delayed start time and begin heating.
Note: When the control is set for a delayed time bake the time of day is displayed until the delayed time bake is reached.
When the oven will turn on, the oven temperature will be displayed. To see the cook time remaining press the BAKE
TIME pad and to see the time of day press the CLOCK pad.

When the Set Bake Time Runs Out:

1. "END" will appear in the display window and the oven will shut off automatically.
2. The control will beep 3 times every 25 seconds until the CLEAR/OFF pad is pressed.

To Change the Oven Temperature or Bake Time after Baking has Started:
1. Press the function pad you want to change.
2. Press the UP or DOWN ARROW pad to adjust the setting.

Use caution with the Timed Bake and Delayed Start features. Foods that can easily spoil such as milk, eggs, fish,
meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1
hour before cooking begins, and should be removed promptly when cooking is completed.

5
Setting Oven Controls (continued)

Speed Bake Oven

Speed Speed Bake Oven
Bake clean time Clock
bake light

Keep Start Timer Clear

Broil warm Clean time Oven On/Off /Off
Preheat Controls
Door Locked

Setting the Keep Warm Feature

The KEEP WARM pad turns ON the Keep Warm feature and will maintain an oven temperature of 170° F (77°C). The Keep
Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Keep Warm
feature will shut the oven OFF automatically. The Keep Warm feature may be used without any other cooking operations or can
be used after cooking has finished using BAKE TIME or DELAYED TIMED BAKE.

To set Keep Warm:

1. Arrange the interior oven racks and place baked food in the oven.
2. Press the KEEP WARM pad. "- -" will appear in the display and the Keep Warm indicator light above the pad will turn ON.
Note: If no further pads are touched within 6 seconds the request to turn ON Keep Warm will be cleared.
3. Press the UP or DOWN ARROW pad to start. "Hld" will be displayed.
4. To turn Keep Warm OFF at any time press the CLEAR/OFF or KEEP WARM pad. The Keep Warm indicator light above the
pad will turn OFF.

To set Keep Warm to turn ON automatically:

1. Arrange the interior oven racks and place food in the oven. Set the oven properly for Timed Bake or Delayed Timed Bake.
2. Press the KEEP WARM pad. "- -" will appear in the display and the Keep Warm indicator light above the pad will turn ON.
3. Press the UP or DOWN ARROW pad to start. Keep Warm is set to turn ON automatically after Timed Bake or Delayed Start
Bake has finished.
4. To turn Keep Warm OFF at any time press the CLEAR/OFF pad. The Keep Warm indicator light above the pad will turn OFF.

6
Setting Oven Controls (continued)
To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays)
The BAKE TIME and START TIME pads are used to set the Sabbath feature. The Sabbath feature may only be used with the
BAKE pad. The oven temperature may be set higher or lower after setting the Sabbath feature (the oven temperature
adjustment feature should be used only during Jewish Holidays), however the display will not visibly show or provide any
audible tones indicating whether the change occurred correctly. Once the oven is properly set using Bake with the Sabbath
feature active, the oven will remain continuously ON until cancelled. This will override the factory preset 12-Hour Energy
Saving feature.
If the oven light will be needed during the Sabbath, press the OVEN LIGHT pad before activating the Sabbath feature. Once
the oven light is turned ON and the Sabbath feature is active, the oven light will remain ON until the Sabbath feature is
turned OFF. If the oven light needs to be OFF, be sure to turn the oven light OFF before activating the Sabbath feature.

IMPORTANT NOTES: It is not advised to attempt to activate any other program feature other than BAKE while the Sabbath
feature is active. ONLY the following key pads will function after setting the Sabbath feature; UP or DOWN ARROW, BAKE
& CLEAR/OFF. ALL OTHER KEYPADS will not function once the Sabbath feature is properly activated.

To Program the Oven to Begin Baking Immediately & activate the Sabbath feature:
1. Be sure that the clock is set with the correct time of day.
2. Place the food in the oven.
3. Press the BAKE pad. " — — — ° " appears in the display.
4. Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350°F (177°C)." By holding the UP or
DOWN ARROW pad, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display
Celsius).
5. If you desire to set the oven control for a Timed Bake or a Delayed Start do so at this time. If not, skip this step and
continue to step 6. Refer to the Bake Time (complete steps 6-7) / Start Time (complete steps 6-10) section for
complete instructions. Remember the oven will shut down after using Bake Time or Start Time and therefore may only
be used once during the Sabbath/Jewish Holidays. The maximum Start Time Bake time is 11 hours & 59 minutes.
6. The oven will turn ON and begin heating.
7. Press and hold both the Bake Time and Start Time pads for at least 3 seconds. SAb will appear in the display. Once
SAb appears in the display the oven control will no longer beep or display any further changes and the oven is properly
set for the Sabbath feature.
Note: You may change the oven temperature once baking has started by pressing the UP or DOWN ARROW (for Jewish
Holidays only). The oven temperature will be adjusted in 5°F increments with each press of these pads (1°C if the control
is set to display Celsius). Remember that the oven control will no longer beep or display any further changes
once the oven is set for the Sabbath feature.
8. The oven may be turned OFF at any time by first pressing the Clear/Off pad (this will turn the oven OFF only). To turn
OFF the Sabbath feature press and hold both the Bake Time and Start Time pads for at least 3 seconds. SAb will
disappear from the display.

Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not turn
back on automatically. The oven will remember that it is set for the Sabbath and the food may be safely removed from the
oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath. After the
Sabbath observance turn OFF the Sabbath feature. Press and hold both the Bake Time and Start Time pads for at least 3
seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further assistance,
guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at
http:\\www.star-k.org.

7
Oven Cleaning
Self-Clean or Speed Clean Cycle time length
For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or heavy soils.
NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the Self-
Clean or Speed Clean cycle. This will help eliminate the normal odors associated with the Self-Cleanning cycles.

To Set the Controls for a Self-Clean or Speed Clean Cycle or a NOTE: A smoke eliminator in the
Delayed Start Self-Clean or Delayed Start Speed Clean Cycle: oven vent converts most of the soil
(Note: If you do not want to start a Delayed Self-Clean or Speed Clean Cycle, skips into a colorless vapor.
steps 2 & 3.)
1. Be sure the clock shows the correct time of day. To avoid possible
2. Press the START TIME pad. burns use care when opening the
3. Press and hold the UP ARROW pad to scroll to the time to start the delayed Self- oven door after the Self-Cleaning
Clean cycle. Release the pad when the desired time is displayed. cycle. Stand to the side of the oven
4. Press the CLEAN pad (for a 3 hour cycle) or the SPEED CLEAN pad (for a 2 hour when opening the door to allow hot
cycle). "- -" appears in the display. air or steam to escape.
5. Press the UP ARROW pad once.
As soon as the controls are set, the motor driven lock will begin to close
DO NOT force the
automatically and the “Door Locked” indicator light will flash. DO NOT open the
oven door while the light is flashing (it takes about 15 seconds for the oven door to oven door open. This can damage
lock). the automatic door locking system.
6. "CLn" will appear in the display during the Self-Clean cycle and the "Door Locked" Use caution and avoid possible burns
light will glow until the Self-Cleaning cycle is complete or cancelled and the oven when opening the door after the
temperature has cooled. Self-Cleaning cycle has completed.
The oven may still be VERY HOT.
When the Self-Clean or Speed Clean Cycle is Completed:
1. The time of day or "End" will appear in the display window and the “Clean” and
"Door Lock" light will continue to glow.
2. Once the oven has cooled down for about 1 HOUR and the "Door Lock" light has
gone out, the oven door can be opened.
3. If “End” is in the display and the Select Clean indicator light remains ON, press the
CLEAR/OFF pad. The time of day will appear in the display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp
cloth or paper towel.

Stopping or Interrupting a Self-Cleaning or Speed Cleaning Cycle

If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1. Press the CLEAR/OFF pad.
2. Once the oven has cooled down for about 1 HOUR and the "Door Lock" light has
gone out, the oven door can be opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.

Adjusting the Oven Temperature

Your oven thermostat has been precisely set at the factory. This setting may differ from your previous oven, however, so your recipe
times may not give you the results you expect. If you think that the oven is cooking too hot or cool for your recipe times, you can
adjust the thermostat so that the oven cooks hotter or cooler than the temperature displayed.

To Adjust Oven Temperature:

1. Press and hold the BAKE pad for 8 seconds. The display now indicates the amount of degrees offset between the original factory
temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will
read “0”.
2. The temperature can now be adjusted up or down 35°F or 19°C, in 1°F or 1°C steps by pushing and holding the UP or DOWN
ARROW pad. Adjust until the desired amount of degrees offset appears in the display. When lowering the oven temperature,
a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.
3. When you have made the desired adjustment, wait 5 seconds and the display will go back to the time of day.

Note: Oven temperature adjustment made will not change the Self-Cleaning feature temperature.
8