World Guide Rail Alliance

USA/Canada
Monteferro America
Phone (204) 222-0247
1-866-222-0247
Fax (204) 224-4275
E-mail: [email protected]

Italy
Monteferro S.p.A.
Phone: ++39-0332-970970
Fax: ++39-0332-971016
E-mail: [email protected]

Brazil
Monteferro América Latina L.T.D.A.
Phone: ++55-11-38744760
Fax: ++55-11-38744764
E-mail: [email protected]
s p e c i f i c a t i o n s

Czech Republic
Monteferro Hradek A.S.
Phone: ++420-181-725467
Fax: ++420-181-725477
E-mail: [email protected]

China

S
Hebei Monteferro Guide Rails Co., L.T.D.
Phone: ++86-317-2029504
Fax: ++86-317-2026327
E-mail: [email protected]

Standard Machined Guide Rails Hong Kong

Monteferro Pacific Trading Ltd.
Phone: ++852-25214225
Fax: ++852-25261393
E-mail: [email protected]

Printed in Canada

ISO 9002 certified since 1995

Monteferro America
SStandard Machined Guide Rails

S
Monteferro’s Standard guide rails are manufactured in standard lengths of 7’, 8’, 9’ and 16’. T70 and T89 rails are also available in 10’ lengths.
Metric lengths of 5m and 2.5m as well as custom machined and saw cut lengths are also available.

Dimensions
All dimensions in inches unless noted.

Monteferro
Code ISO Code q1 b1 h1 h k n c g f m1 m2 t1 t2 d d1 l b3 l2 l3
lb/ft
Tolerances +/- 0.06 +/- 0.03 +/- 0.004 +0.004, -0 +0.0025, -0 +0, -0.0025 +/- 0.004 +/- 0.004 +/- 0.008 +/- 0.008 +/- 0.008

T70/B — 6.25 2.75 1.978 1.937 0.625 1 0.375 0.313 0.4375 0.252 0.251 0.281 0.25 0.5625 N/A 6.14 1.813 4.50 1.50

T89/B T89/B 8.27 3.50 2.44 2.402 0.625 1.3125 0.375 0.313 0.4375 0.252 0.251 0.281 0.25 0.5625 1.024 6.14 2.250 4.50 1.50

T114/B — 11.12 4.50 3.50 3.465 0.625 1.5 0.375 0.313 0.4375 0.252 0.251 0.281 0.25 0.6875 1.299 6.14 2.625 4.50 1.50

T127-1/B T127-1/B 11.94 5.00 3.50 3.465 0.625 1.75 0.375 0.313 0.4375 0.252 0.251 0.281 0.25 0.6875 1.299 6.14 3.125 4.50 1.50

T127-2/B T127-2/B 15.11 5.00 3.50 3.465 0.625 2 0.375 0.500 0.625 0.252 0.251 0.281 0.25 0.6875 1.299 6.14 3.125 4.50 1.50

T140-1/B T140-1/B 18.55 5.50 4.25 4.213 0.748 2 0.5 0.500 0.625 0.252 0.251 0.281 0.25 0.8125 1.575 7.6 3.625 6.00 1.25

T140-2/B T140-2/B 22.79 5.50 4.02 3.976 1.125 2 0.6875 0.563 0.6875 0.252 0.251 0.281 0.25 0.8125 1.575 7.6 3.625 6.00 1.25

T140-3/B T140-3/B 30.91 5.50 5.00 4.961 1.250 2.25 0.75 0.688 1.000 0.252 0.251 0.281 0.25 0.8125 1.575 7.6 3.625 6.00 1.25

Tolerances Sectional properties

Blade roughness Straightness Monteferro ISO Code A q1 Y Ixx zx rx Iyy zy ry

Code in2 lb/ft in in4 in3 in in4 in3 in
longitudinal Ra ≤ 63µin B/A = 0.001 in
transverse Ra ≤ 126µin B/16’ = + 0.08 in
T70/B — 1.79 6.25 0.67 0.66 0.52 0.60 0.62 0.46 0.59

T89/B T89/B 2.43 8.27 0.80 1.43 0.87 0.77 1.26 0.72 0.72
Twisting Parallelism
T114/B — 3.22 11.12 1.13 4.30 1.81 1.16 2.59 1.17 0.90
= 9.1’/ft p = 0.004 in
T127-1/B T127-1/B 3.51 11.94 1.08 4.47 1.86 1.13 3.56 1.43 1.01

T127-2/B T127-2/B 4.44 15.11 0.97 4.77 1.89 1.04 5.53 2.21 1.11

Perpendicularity Tongue and groove centering T140-1/B T140-1/B 5.46 18.55 1.28 9.71 3.26 1.33 7.45 2.70 1.17

= 5’ c = 0.004 in T140-2/B T140-2/B 6.70 22.79 1.37 10.98 4.15 1.28 8.60 3.12 1.13
ß = 15’
T140-3/B T140-3/B 9.08 30.91 1.72 22.90 6.99 1.59 11.68 4.24 1.13

Guide rails are manufactured in accordance with the ISO 7465: 1997 (E) specification.