frmCourseSyllabusIPDownload (5)
frmCourseSyllabusIPDownload (5)
CO1 :: Understand the workings of various semiconductor devices and analyze their applications.
CO2 :: Analyze virtual applications by configuring arduino board and sensor module.
CO3 :: Examine various number systems and their application in digital circuits.
CO5 :: Develop sequential circuits with flip-flops and ICs for various applications.
Unit I
Fundamentals of Electrical Laws, Semiconductor Devices and its Applications : Ohm’s Law,
Kirchhoff’s Law, Voltage division rule, Current division rule, Basics of semiconductors (Intrinsic and
Extrinsic), PN junction diode (working and characteristics) and its applications (rectifiers and switch),
Bipolar junction transistor (types, modes, construction, and working CE configuration)
Unit II
Introduction of Arduino and Sensors : Analog and digital signals, Arduino board (pin configuration
and description), IR sensor., LDR, basic principle of ultrasonic sensor, Temperature sensor
(DHT11/DHT22)
Unit III
Introduction to number system and logic gates : Number system (conversion), codes (B-G,G-
B,Excess-3,BCD), Compliments, Binary Arithmetic (addition and subtraction using 2’s complement),
logic gates, boolean algebra, SOP and POS, K- Map ( up to 4 variables)
Unit IV
Introduction to Combinational Logic Circuits : Adders, Subtractors, Comparators, Multiplexers,
De-multiplexers, Decoders, Encoders
Unit V
Introduction to Sequential Logic Circuits : Latch (SR and D), Flip-Flop (SR, JK, D and T), Master-
Slave flip-flop, Conversion of basic flip-flop
Unit VI
Applications of Sequential Circuits : Registers: Operation of basic shift registers (SISO, SIPO,
PISO, PIPO), Counters: Asynchronous counter (UP/DOWN/Mod-N), Synchronous counter
(UP/DOWN/Mod-N), Ring counter and Johnson ring counter
Text Books:
1. DIGITAL LOGIC & COMPUTER DESIGN by M. MORRIS MANO, PEARSON
References:
1. . DIGITAL FUNDAMENTALS BY THOMAS L. FLOYD , R. P JAIN, PEARSON by THOMAS L.
FLOYD , R. P JAIN, PEARSON
2. ELECTRONIC CIRCUIT FUNDAMENTALS AND APPLICATIONS by MIKE TOOLEY, NEWNES
PUBLISHERS
3. FUNDAMENTALS OF ELECTRICAL ENGINEERING AND ELECTRONICS by B.L.THERAJA, S.
CHAND & COMPANY
4. DIGITAL ELECTRONICS PRINCIPLES,DEVICES AND APPLICATIONS by ANIL K. MAINI,
WILEY