Scribd
Upload
71 views

Hexcel® HexPly® 913 125°C Curing Epoxy Matrix

Material Data Sheet

Uploaded by

jonathon.l.evans
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
71 views

Hexcel® HexPly® 913 125°C Curing Epoxy Matrix

Material Data Sheet

Uploaded by

jonathon.l.evans
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HexPly® 913

125°C curing epoxy matrix


Product Data Sheet

Description
HexPly® 913 is a proven modified epoxy matrix with a low temperature cure cycle which exhibits outstanding
environmental resistance, whilst retaining good hot/wet mechanical performance. This versatile matrix system
can be processed using a wide range of techniques according to the application and is capable of co cure with
epoxy film adhesives.

HexPly® 913 is a highly successful matrix used extensively in the aerospace industry for primary aircraft
structures and helicopter blades.

Benefits and Features


¥¥Exceptional environmental resistance
¥¥Controlled minimum viscosity giving easy processing

¥¥Capable of being processed by various techniques

¥¥Good tack and drape characteristics

¥¥Long shelf life and out life at room temperature

¥¥Compatible with Redux 312 adhesive film

Resin Matrix Properties

Rheology Gel Time


Viscosity/poise Gel Time (minutes)
10000
40

30
1000

20

100
10

0 0
40 65 90 115 140 165 195 80 90 100 110 120 130 140

Temperature °C Temperature °C

Cured Matrix Properties (cured at 125°C)


Method
Tensile strength 65.5 MPa ISO R527 type 1
Tensile modulus 3.39 GPa ISO R527 type 1
Cured density 1.23 g/cm3

Copyright © 2016 – Hexcel Corporation – All Rights Reserved. 1


HexPly® 913
125°C curing epoxy matrix
Product Data Sheet

Prepreg Curing Conditions


60 mins at 125°C and 700kN/m2 (7 bar) pressure. Heat up rate 2°C to 8°C.

Alternative cure cycles:


Temperature °C Time (Min)
140 40
150 20
160 10

Components up to 3 mm thick can be cured without a dwell in the schedule provided that the heat-up rate is not
more than 5°C/minute. A dwell period is necessary in the heat-up to avoid the occurrence of a resin exotherm
(usually 80 - 100°) but the dwell period will depend on the mass and type of tool.

Prepreg Storage Life


¥¥Tack Life @ 23°C 30 days

¥¥Guaranteed Shelf Life @ -18°C 12 months

¥¥Storage conditions.

HexPly® 913 prepregs should be stored as received in a cool dry place or in a refrigerator. After removal from
refrigerator storage, prepreg should be allowed to reach room temperature before opening the polythene bag,
thus preventing condensation. (A full reel in its packaging can take up to 48 hours).

Precautions for Use


The usual precautions when handling uncured synthetic resins and fine fibrous materials should be observed,
and a Safety Data Sheet is available for this product. The use of clean disposable inert gloves provides protection
for the operator and avoids contamination of material and components.

For more information


Hexcel is a leading worldwide supplier of composite materials to aerospace and industrial markets.
Our comprehensive range includes:
¥¥HexTow® carbon fibers ¥¥HexFlow® RTM resins ¥¥Acousti-Cap® sound attenuating
¥¥HexForce® reinforcements ¥¥Redux® adhesives honeycomb
¥¥HexPly® prepregs ¥¥HexTool® tooling materials ¥¥Engineered core

¥¥HexMC® molding compounds ¥¥HexWeb® honeycombs ¥¥Engineered products

For US quotes, orders and product information call toll-free 1-800-688-7734. For other worldwide sales office
FTA-054-AG16

telephone numbers and a full address list, please go to:

http://www.hexcel.com/contact/salesoffice

©2016 Hexcel Corporation – All rights reserved. Hexcel Corporation and its subsidiaries (“Hexcel”) believe that the technical data and other information
provided herein was materially accurate as of the date this document was issued. Hexcel reserves the right to update, revise or modify such technical data and
information at any time. Any performance values provided are considered representative but do not and should not constitute a substitute for your own testing of
the suitability of our products for your particular purpose. Hexcel makes no warranty or representation, express or implied, including but not limited to
the implied warranties of merchantability and fitness for a particular purpose, and disclaims any liability arising out of or related to, the use of or
reliance upon any of the technical data or information contained in this document.
2

You might also like