Documented by Samaksh Rawal

Chemical Reactions and Equations

Chemical Reaction - The transformation of chemical substance into another chemical substance is
known as Chemical Reaction. For example: rusting of iron, burning of coal, burning of candle, burning of
paper, setting of milk into cottage cheese or ghee, digestion of food etc.

In chemical reaction new substance is formed which is completely different in properties from the original
substance, so in a chemical reaction chemical change takes place.

Experiment I -
The burning of magnesium in air to form magnesium oxide is an example of a chemical reaction.

Magnesium + Oxygen Magnesium Oxide

(As ribbon) (From air) (White Powder)

• Take about 2cm long and clean it by rubbing its surface with sand paper.

• Hold it with a pair of tongs. Burn it using a burner.

• The magnesium ribbon starts burning with a dazzling white flame.

• Hold the burning magnesium ribbon over a watch glass so that the magnesium oxide powder being
formed collects in the watch glass.

Note: Before burning in air, the magnesium ribbon is cleaned by rubbing with a sand paper. This is done
to remove the protective layer of basic magnesium carbonate from the surface of magnesium ribbon so
that it may readily combine with the oxygen of air.

Experiment 2 –
Formation of a precipitate:

Some chemical reactions are characterized by the formation of precipitate. A precipitate is a 'solid
product' which separates out from the solution during a chemical reaction.

The chemical between potassium iodide and lead nitrate is characterized by the formation
of a yellow precipitate of lead iodide.

• Take some lead nitrate solution in test tube.

• Add potassium iodide solution to it.

• A yellow precipitate of lead iodide is formed at once.

• A change in colour also takes place in this chemical reaction.

1
 Documented by Samaksh Rawal
Experiment 3 –
Evolution of a Gas:

Some chemical reactions are characterized by the evolution of a gas.

The chemical reaction between zinc and dilute sulphuric acid is characterized by the
evolution of hydrogen gas.

• Take some zinc granules in a conical flask.

• Add dilute sulphuric acid over zinc granules.

• We will see the bubbles of hydrogen gas being formed around zinc granules.

• If we touch the conical flask with our hand, we will find that it is somewhat hot. So, a change in
temperature also occurs in this chemical reaction.

Experiment 4 –
Change in colour:

Some chemical reactions are characterized by a change in colour.

The chemical reaction between citric acid and purple coloured potassium permanganate solution is
characterized by a change in colour from purple to colourless.

• Take some dilute potassium permanganate solution in a test tube. It has purple colour.

• Add some lemon juice (it contains citric acid) to it with the help of a dropper and shake the test tube.

• The purple colour of potassium permanganate solution goes on fading and ultimately it becomes
colourless.

Experiment 5 –
Change in temperature:

Some chemical reactions are characterized by a change in temperature.

The chemical reaction between quicklime and water to form slaked lime is characterized
by a change in temperature.

• Take a little of quicklime in a hard-glass beaker.

• Add water to it slowly.

• Touch tie breaker.

2
 Documented by Samaksh Rawal
• The beaker feels to be quite hot.

Experiment 6 –
Change in State:

Some chemical reactions are characterized by a change in state.

 When wax is burned (in the form of wax candle,) then water and carbon dioxide are formed.
 Now, wax is a liquid whereas carbon dioxide is a gas. This means that during the combustion
reaction of wax, the physical state changes from solid liquid and gas.

Common observations in a chemical reaction -

(a) Change of state of substance.

(b) Change in colour of substance.

(c) Evolution of gas

(d) Change in temperature.

Chemical Equation –
Reactant: Substances which take part in a chemical reaction are called reactants.

Product: New substance formed after a chemical reaction is called product.

Representation of chemical reaction using symbols of substances is called chemical equation.

Example:

In this equation, A and B are called reactants and C and D are called products. Arrow shows the direction
of chemical reaction. Condition, if any. Is written generally above the arrow.

When hydrogen reacts with oxygen, it gives water. This reaction can be represented by following
chemical equation.

Hydrogen + Oxygen Water -------- (i)

------------------- (ii)

In first equation, words are used and in second symbols of substances are used to write the chemical
equation. For convenience, symbol of substance is used to represent chemical equations.

3
 Documented by Samaksh Rawal
Chemical Equation is a way to represent the chemical reaction in concise and informative way.

Chemical equation can be divided into two types —

(i) Balanced Chemical Equation

(ii) Unbalanced Chemical Equation.

Balanced Chemical Equation – A balanced chemical equation has number of atoms of each element
equal on both sides.

Example:

In this equation, numbers of atoms of zinc, hydrogen and sulphate are equal on both sides, so it is a
balanced chemical equation.

According to Law of Conservation of Mass, mass can neither be created nor destroyed in a chemical
reaction. To obey this law, the total mass of elements present in reactants must be equal to the total mass
of elements present in products or we can say that initial number of atoms of an element should be equal
to final number of atom.

Unbalanced Chemical Equation - If the number of atoms of each element in reactants is not equal to
the number of atoms of each element present in product, then the chemical equation is called unbalanced
chemical equation.

Example:

In this example numbers of atoms of elements are not equal on two sides of the reaction. For example, on
the left hand side only one iron atom is present, while three iron atoms are present on the right hand side.
Therefore, it is an unbalanced chemical equation.

Balancing a chemical equation -

To balance any chemical equation, we have to follow these steps:

(1) Write the number of atoms of elements present in reactants and in products in a table; as shown here.

4
 Documented by Samaksh Rawal
Name of atom Number of atoms present in Number of atom present in
reactant product

Iron (Fe) 1 3
Hydrogen (H) 2 2
Oxygen (O) 1 4

Attack on the problem.

In above equation, number of elements of iron and oxygen are not equal on two sides.

Let's take oxygen first.

(3) Attack the side where there is less number of atoms of that particular element.

In above equation, number of oxygen atom is minimum on LHS.

(4) Thus to balance the equation, we need to multiply the oxygen by 4 on LHS.

(5) Now again check the number of atoms of each element present in reactants and in products.

You can see that the number of hydrogen atoms becomes 8 on the LHS; which is more than that on the
RHS. To balance it, one needs to multiply the hydrogen on the RHS by 4.

(6) After that number of oxygen and hydrogen atoms becomes equal on both sides. The number of iron is
one on the LHS, while it is three on the RHS. To balance it, multiply the iron on the LHS by 3.

(7) Now the number of atoms of each element becomes equal on both sides. Thus, this equation becomes
a balanced equation.

Name of atom Number of atoms present in Number of atom present in

reactant product

iron (Fe) 3 3

5
 Documented by Samaksh Rawal
Hydrogen (H) 8 8
Oxygen (O) 4 4

After balancing, the above equation can be written as follows.

Q.1 Balance the given equations.

(a)

Answer:

(b)

Answer :

Chlorophyll
(c) + Sunlight +

Chlorophyll
Answer:6 CO 2 ( g) + 6 H 2 O (l) Sunlight

(d) + +

Answer + +

Making Chemical Equation More Informative –

1. By writing the physical states of substances a chemical equation becomes more
informative

Gaseous state is represented by symbol 'g'.

Liquid state is represented by symbol ‘I'.

Solid state is written by symbol 's'.

6
 Documented by Samaksh Rawal
Aqueous solution (substance dissolved in water) is written by symbol 'aq'.

2. Exothermic and Endothermic Reaction –

Reactions which produce energy are called exothermic reaction.

Reactions which absorb/require energy are called endothermic reaction.

Respiration is a exothermic reaction as in respiration process energy is released. When quick lime
(calcium carbonate) is added to water, it decomposes and releases energy. So it is also an example of
exothermic reaction.

Cooking involves chemical reactions which are endothermic as cooking is possible because of heating.
Similarly in process of photosynthesis, sunlight is required so it is also an example of endothermic
reaction.

3. Writing the condition in which reaction takes place –

The condition is generally written above and/or below the arrow of a chemical equation. 340 atm.

• Catalyst is a chemical substance which is neither a reactant nor a product but the reactions takes
place only in its presence or the reaction speeds up in its presence.

300 atm , 300 o C

ZnO + CrO 2 CH3OH

Thus, by writing the symbols of physical state of substances and condition under which reaction takes
place, a chemical equation can be made more informative.

Example:

NI
250 C−300o C
o

NO(g )
+ Nitric Oxide

Chlorophyll
Sunlight +

7
 Documented by Samaksh Rawal
Oxidation and Reduction Reactions
Oxidation: Addition of oxygen or non-metallic element or removal of hydrogen or metallic element
from a compound is known as oxidation.

Elements or compounds in which oxygen or non-metallic element is added or hydrogen or metallic

element is removed are called to be oxidized.

Oxidizing agent: Compounds which can add oxygen or a non-metallic compound or remove hydrogen
or metallic element are known as oxidizing agents.

Reduction: Addition of hydrogen or metallic element or removal of oxygen or non-metallic element

from a compound is called reduction. The compound or element which goes under reduction is called to
be reduced.

Reducing agent: Compounds or elements which can cause reduction are called reducing agents.

In a chemical reaction oxidation and reduction both take place simultaneously and such reactions are also
known as REDOX REACTIONS. In the word REDOX, 'Red' stands for reduction and 'Ox' stands for
oxidation.

Example:

When iron reacts with air, it forms iron oxide (rust).

In this reaction, oxygen is added to iron, thus, iron is oxidized. Here oxygen is oxidizing agent.

When cupric oxide reacts with hydrogen, it gives copper and water.

In this reaction oxygen is removed from cupper and oxygen is added to hydrogen. So, cupric oxide is
reduced to copper and hydrogen is oxidized to water. Cupric oxide is oxidizing agent and hydrogen is
reducing agent.

When sodium hydroxide reacts with hydrochloric acid, it gives sodium chloride and water.

+ +

8
 Documented by Samaksh Rawal
In this reaction, sodium hydroxide is reduced to sodium chloride since hydrogen is removed from sodium
hydroxide. Hydrochloric acid is oxidized to water, since oxygen is added to hydrogen chloride and non-
metallic element chloride is removed. Sodium hydroxide is oxidizing agent and hydrochloric acid is
reducing agent.

In this reaction oxidation and reduction both takes place simultaneously, thus it is an example of redox
reaction.

Effects of Oxidation –
1. Respiration is oxidation reaction in which food is oxidized to produce energy.

2. Iron gets oxidized to form rust; which leads to corrosion of iron in the long run.

3. Most of the metals react with atmospheric oxygen and it leads to formation of a layer on the metal
article. The metal gets corroded in the long run.

4. Rusting of iron can be prevented by painting the iron article. This can also be prevented by applying a
layer of zinc over iron article. This process is known as galvanization.

5. Fried food gets oxidized when exposed to air. This spoils the taste of the food and the food becomes
unfit for consumption. The spoiling of fried food because of oxidation is called rancidity. Fried food is
often packed in airtight packets to prevent rancidity.

6. We are able to utilize various types of fuel because of oxidation. Oxidation of fuel helps in producing
energy.

Types of Chemical Reaction –

Chemical reactions can be classified in following types:-

a. Combination Reactions

b. Decomposition Reactions

c. Displacement Reactions

d. Double Displacement Reactions

a. Combination Reaction - Reactions in which two or more reactants combine to form one product are
called combination reactions.

A general combination reaction can be represented by the chemical equation given here.

A+B AB

Example:

9
 Documented by Samaksh Rawal
When magnesium is burnt in air (oxygen), magnesium oxide is formed. In this reaction, magnesium is
combined with oxygen.

When carbon is burnt in oxygen (air), carbon dioxide is formed. In this reaction, carbon is combined with
oxygen.

When hydrogen reacts with chlorine, hydrogen chloride is formed.

2 HCl
+ Hydrogen chloride
When calcium oxide reacts with water, calcium hydroxide is formed

Ca(OH )2 (aq )
+ Calcium Hydroxiede
When carbon monoxide reacts with oxygen, carbon dioxide is formed.

2 CO( g ) 2CO 2
Carbon monxide + Carbon dixoide
b. Decomposition Reaction - Reactions in which one compound decomposes in two or more
compounds or element are known as decomposition reaction. Decomposition reaction is just opposite of
combination reaction.

A general decomposition reaction can be represented as follows:

AB --------------- A+B

Example:

When calcium carbonate is heated, it decomposes into calcium oxide and carbon dioxide

When ferric hydroxide is heated, it decomposes into ferric oxide and water.

10
 Documented by Samaksh Rawal

Thermal Decomposition:
When lead nitrate is heated, it decomposes into lead oxide, nitrogen dioxide and oxygen.

In the above examples compound is decomposed because of heating, so, these reactions are called
thermal decomposition.

Electrolytic Decomposition:
Reactions, in which compounds decompose into simpler compounds because of passing of electricity, are
known as electrolytic decomposition. This is also known as electrolysis.

Example:

When electricity is passed in water, it decomposes into hydrogen and oxygen.

Photolysis or Photo Decomposition:

Reactions in which a compound decomposes because of sunlight are known as photolysis or photo
decomposition.

Example:

When silver chloride is put in sunlight, it decomposes into silver metal and chlorine gas.

2 AgCl (l)
Silver chloride +

Similarly, when silver bromide is put under sunlight, it decomposes into silver metal and bromine gas.

11
 Documented by Samaksh Rawal
Photographic paper has coat of silver chloride, which turns into grey when exposed to sunlight. It happens
because silver chloride is colourless while silver is a grey metal.

c. Displacement Reaction - Reactions in which atoms or ions move from one compound to other to
form new compound are known as displacement reaction. Displacement reaction is also known as
Substitution Reaction or Single displacement /Replacement Reaction.

A general displacement reaction can be represented using chemical equation as follows:

A + BC AC + B

Displacement reaction takes place only when 'A' is more reactive than B. If 'B' is more reactive than

'A', then 'A' will not displace 'C' from 'BC' and reaction will not be taken place.

Example:

When zinc reacts with hydrochloric acid, it gives hydrogen gas and zinc chloride.

When zinc reacts with copper sulphate, it forms zinc sulphate and copper metal.

ZnSO 4 (aq )
Zinc sulphate

When silver metal is dipped in copper nitrate, no reaction takes place because silver metal s less reactive
than copper.

d. Double Displacement Reaction - Reactions in which ions are exchanged between two reactants
forming new compounds are called double displacement reactions.

A general double displacement reaction can be represented using following general chemical equation.

AB + CD AD + CB

Example:

When solution of barium chloride reacts with the solution of sodium sulphate, white precipitate of barium
sulphate is formed along with sodium chloride.

12
 Documented by Samaksh Rawal
BaCl2(aq) + Na2SO4(aq) BaSO4(S) + Nacl(aq)

Barium chloride Sodium Sulphate Barium sulphate (white ppt) Sodium Chloride

When sodium hydroxide (a base) reacts with hydrochloric acid, sodium chloride and water are formed.

NaOH(aq) + HCl(aq) NaCl(aq) + H2O(l)

Sodium hydroxide Hydrochloric acid Sodium chloride Water

Double displacement reaction, in which precipitate is formed, is also known as precipitation reaction.
Neutralization reaction are also examples of double displacement reaction.

13