Product data sheet XCMH21F2L1

Characteristics XCMH Limit Switches Miniature Plastic M12

head metal roller plunger NC + NO Snap L1

Main
Range of product Telemecanique Limit switches XC Standard
Series name Standard format
Product or component Limit switch
type
Device short name XCMH
Sensor design Miniature
Body type Fixed
Head type M12 plunger head
Material Plastic
Body material Plastic
Head material Zamak

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Fixing mode By the head
Movement of operating Linear
head
Type of operator Spring return roller plunger metal
Type of approach Lateral approach, 2 directions
Number of poles 2
Contacts type and 1 NC + 1 NO
composition

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Contact operation Snap action

Complementary
Switch actuation By 30° cam

Neither TMSS Holding nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Electrical connection Fixed cable
Cable length 1m
Cable composition 4 x 0.34 mm²
Wire insulation material PvR
Contacts insulation form Zb
Positive opening With
Positive opening minimum force 35 N
Minimum force for tripping 7N
Maximum actuation speed 10 cm/s
Contact code designation C300, AC-15 (Ue = 240 V), Ie = 0.75 A conforming to IEC 60947-5-1 appendix A
R300, DC-13 (Ue = 250 V), Ie = 0.1 A conforming to IEC 60947-5-1 appendix A
[Ui] rated insulation voltage 300 V (pollution degree 3) conforming to UL 508
400 V (pollution degree 3) conforming to IEC 60947-5-1
300 V (pollution degree 3) conforming to CSA C22.2 No 14
Maximum resistance across terminals 25 MOhm conforming to IEC 60255-7 category 3
[Uimp] rated impulse withstand voltage 4 KV conforming to IEC 60664
4 kV conforming to IEC 60947-1
Short-circuit protection 6 A cartridge fuse, type gG
Electrical durability 5000000 Cycles, DC-13, 120 V, 1 W, operating rate <60 cyc/mn, load factor: 0.5
conforming to IEC 60947-5-1 appendix C
5000000 Cycles, DC-13, 24 V, 3 W, operating rate <60 cyc/mn, load factor: 0.5
conforming to IEC 60947-5-1 appendix C
5000000 cycles, DC-13, 48 V, 2 W, operating rate <60 cyc/mn, load factor: 0.5
conforming to IEC 60947-5-1 appendix C
Mechanical durability 5000000 cycles
Width 30 mm
Height 88 mm

Jul 30, 2024

1
Depth 16 mm
Net weight 0.095 kg

Environment
Shock resistance 25 gn for 18 ms conforming to IEC 60068-2-27
Vibration resistance 5 gn (f= 10…500 Hz) conforming to IEC 60068-2-6
IP degree of protection IP66 conforming to IEC 60529
IP67 conforming to IEC 60529
IK degree of protection IK04 conforming to IEC 62262
Electrical shock protection class Class II conforming to IEC 61140
Class II conforming to NF C 20-030
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -40…70 °C
Protective treatment TC
Product certifications CSA[RETURN]CCC[RETURN]UL
Standards IEC 60947-5-1
IEC 60204-1
CSA C22.2 No 14
UL 508

Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 1.6 cm
Package 1 Width 20 cm
Package 1 Length 25 cm
Package 1 Weight 91 g
Unit Type of Package 2 S02
Number of Units in Package 2 30
Package 2 Height 15 cm
Package 2 Width 30 cm
Package 2 Length 40 cm
Package 2 Weight 3.894 kg

Offer Sustainability
WEEE The product must be disposed on European Union markets following specific
waste collection and never end up in rubbish bins
California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl
phthalate (DINP), which is known to the State of California to cause cancer,
and Di-isodecyl phthalate (DIDP), which is known to the State of California
to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
For all Reach Rohs enquiries contact us at [email protected]

Contractual warranty
Warranty 18 months

2
Product data sheet XCMH21F2L1
Dimensions Drawings

Dimensions

(1) 2 fixing holes Ø 4.2 mm (0.16 in.), counterbored Ø 8 mm by 4 mm deep (counterbored Ø 0.32 in. by 0.16 in. deep).
(2) Cable external diameter: 4.2 mm (0.16 in.)
(3) Fixing nut thickness 3.5 mm (0.13 in.).
e : 8 mm (0.32 in.) max, panel cut-out Ø 12.5 mm (0.49 in.).

3
Product data sheet XCMH21F2L1
Mounting and Clearance

Mounting and Clearance

Mounting: distance required for connection

d : min.15 mm/min.0.59 in.

Sweep of Connecting Cable

(1) : Recommended
(2) : To be avoided

Mounting with Spacers

(1) : 2 spacers supplied with the switch

(2) : 2 screws Ø 4mm (not included)

Panel Mounting

Mounting and Fixing Limit Switches by the Head

(1) Recommended
(2) Forbidden

4
Product data sheet XCMH21F2L1
Connections and Schema

Wiring diagram

2-pole NC + NO snap action

(BK) Black
(WH) White
(BN) Brown
(BU) Blue

5
Product data sheet XCMH21F2L1
Technical Description

Characteristics of Actuation

Switch Actuation by 30° Cam

Functional Diagram

(P) Positive opening point

(A) Cam displacement
(1) NC contact with positive opening operation
(2) Closed
(3) Open
(4) Tripping
(5) Resetting
(BK) Black
(BK-WH) Black White
(BN) Brown
(BU) Blue