Temperature and Humidity Monitor Clock User Manual

Read this manual carefully before use, and retain it for future reference.

Product Overview
Front Accessory List
Guide Mark

Stand

Top Adhesive Sticker Flexible Magnet

Ventilation Holes
Rear Note: Please do not cover the ventilation
holes when using the device.

Guide Mark

Adhesive Area

Cover Opening
01
Installation
Installing the Batteries

Remove the cover from the cover

opening on the back of the clock,

separately) with the negative (—) side

facing downwards, and then reinstall
the cover.

Note: Connect the clock with the Mi

Home/Xiaomi Home app when using it
for the first time. Once connected
successfully, the clock will
automatically calibrate time.

Installing the clock

Once the clock is working normally, it can be installed indoors in the following ways:

a. Using the stand: Remove

the release liner from the
stand, align the guide marks
and press firmly to stick the
Xiaomi Stand
stand on the back of the
Temperature and
clock. Place the clock on a
Humidity Monitor
desk, TV cabinet or other
Clock
flat surface.
02
b. Using the adhesive sticker:
Remove the release liner
from one side of the
adhesive sticker to stick it
on the back of the clock. Xiaomi Adhesive Sticker
Then remove the release Temperature and
liner from the other side of Humidity Monitor
the adhesive sticker to Clock
stick the clock on a wall.

c. Using the flexible magnet:

Remove the release liner
from the flexible magnet
to stick it on the back of
Xiaomi Flexible Magnet
clock to a surface that Temperature and
the magnet can stick to Humidity
such as refrigerator. Monitor Clock

How to Use
Display
Time Data Transfer Symbol

Humidity Comfort Level Symbol

Temperature

03
Refresh Notification

inverted) once every 30 minutes so as to refresh the display.

Comfort Level Description

Temperature
Humidity Less than 19 C Between 19 C and 27 C More than 27 C

Less than 20%

Between 20% and 85%

More than 85%

Notification
right corner of the display.

04
Smart Connection
Connecting with Mi Home/Xiaomi Home App

This product works with Mi Home/Xiaomi Home app*.

Control your device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app.
You will be directed to the connection setup page if
the app is installed already. Or search "Mi Home/
Xiaomi Home" in the app store to download and
install it. Open Mi Home/Xiaomi Home app, tap "+" on
the upper right, and then follow prompts to add your
device.
FC56B352
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the
app displayed on your device should be taken as the default.

Connecting with Other Devices

Once successfully connecting the clock with the app, go to the plugin of Xiaomi
Temperature and Humidity Monitor Clock in the app, and select "Smart scenes". Follow
the instructions in the app to complete the smart connection with other devices.

Notes:
To achieve smart connection, the clock needs to work with devices featuring
Bluetooth gateway function. The gateway and relevant connection devices need to be
purchased separately. Please contact the official customer service for more
information.

The version of the app might have been updated, please follow the instructions
based on the current app version.

05
Restoring Factory Settings
Remove the cover on the back of the
clock, and connect the “Reset” and the
“Gnd” metal points near any battery with
a metal conductive material for more
than 7 seconds when the clock is
working. After the clock restarts, the
factory settings are restored.
Gnd Reset

Cleaning & Maintenance

with some neutral detergent.

Precautions
Do not submerge the ventilation holes into water.

sticker, so as to avoid damage to the wall or the clock.

This clock is not suitable for use in environments with temperatures below 0°C.
Please keep it away from harsh environments with high temperatures or high humidity.
This clock is designed to facilitate a healthy lifestyle, but should not be used as a
measuring tool.

06
Troubleshooting

Issue Possible Cause Solution

. .
The display
stops refreshing.
negative and positive sides .

Calibrate the time

No calibration for an
Time is inaccurate. via Mi Home/Xiaomi
extended period of time
Home app.

Ventilation holes are blocked. Clear any blockage.

Temperature and
humidity are Place in a well-ventilated
inaccurate. Water gets into the
location or use a tissue
ventilation holes.
paper to thoroughly dry out.

Specifications
Name: Xiaomi Temperature and Humidity Monitor Clock
Model: LYWSD02MMC
Materials: ABS + PC
Item Dimensions: 110 × 55 × 10.1 mm
Net Weight: 57 g

07
Rated Voltage: 3 V

Wireless Connectivity: Bluetooth® 5.0 (Bluetooth Low Energy)

Operation Frequency: 2402-2480 MHz
Maximum Output Power: 4 dBm
Time Resolution: 1 min
Temperature Range: 0°C to 60°C
Temperature Resolution: 0.1°C
Humidity Range: 0–99% RH
Humidity Resolution: 1% RH

Note
The 8th to the 10th digits in the SN code on the product and the package represent the
factory code.

Note:
Illustrations of product, accessories, and user interface in the user manual are for
reference purposes only. Actual product and functions may vary due to product
enhancements.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. All product names,
trademarks and registered trademarks are property of their respective owners.

Hereby, Miaomiaoce Technology (Beijing) Co., Ltd. declares that the radio
equipment type LYWSD02MMC is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.mi.com/global/service/support/declaration.html
08
 All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help prevent potential
negative consequences to the environment and human health. Please contact the installer
or local authorities for more information about the location as well as terms and conditions
of such collection points.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Miaomiaoce Technology (Beijing) Co., Ltd. (a Mi Ecosystem company)
Address: No. 1-Y1-06, 1F, Tower A, Innovation Building, No. 11 HEPINGLI East Street,
Dongcheng District, Beijing, China

For further information, please go to www.mi.com

Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz

User Manual Version: 1.0

09