Safety Data Sheet of CEMTEX INJECTOR ACCELERATOR Concentrate COMP.

II Page 1 of 6

Bygging Intercontinental
SAFETY DATA SHEET Cemtex Injector Quality Control Issue
Comp. II
Conforms to EU Directive 91/155/EEC, as amended by 2001/58/EC

1. Identification of the substance/preparation and of the Company / undertaking

Product name CEMTEX INJECTOR ACCELERATOR Concentrate
Comp. II
Use of the substance / Preparation Component of a Polyurethane Injection System
Emergency telephone number 26359865
Manufacturer Bygging Intercontinental , 12 Shehab El Din St
Country :Egypt
Phone: 26359865
Fax: 26359793

2. Composition/information on ingredients
Substance/preparation Preparation

Ingredient name Bis (2-dimethylaminoethyl) ether

CAS number 3033-62-3

% 20 - 50
EC number 221-220-5
Classification T; R23/24
Xn; R22
C; R34
R52/53
See section 16 for the full text of the R
Phrases
Occupational Exposure Limit(s), if
available, are listed in Section 8
3. Hazards identification
The preparation is classified as dangerous according to Directive 1999/45/EC and its amendments.
Classification T; R23/24
Xn; R22
C; R34
R52/53
Physical/chemical hazards Not applicable
Human health hazards Harmful if swallowed
Toxic by inhalation and in contact with skin.
Causes burns

Environmental hazards Harmful to aquatic organisms, may cause long-term

adverse effects in the aquatic
environment
See section 11 for more detailed information on health effects and symptoms
Safety Data Sheet of CEMTEX INJECTOR ACCELERATOR Concentrate COMP. II Page 2 of 6

4. First-aid measures
Inhalation Get medical attention immediately. Move exposed person to fresh air. If
it is suspected that fumes are still present, the rescuer should wear an
appropriate mask or self-contained breathing apparatus. Keep person
warm and at rest. If not breathing, if breathing is irregular or if respiratory
arrest occurs, provide artificial respiration or oxygen by trained
personnel. It may be dangerous to the person providing aid to give
mouth-to-mouth resuscitation. If unconscious, place in recovery
position and get medical attention immediately. Maintain an open airway.
Loosen tight clothing such as a collar, tie, belt or waistband.
Ingestion Get medical attention immediately. Wash out mouth with water. Remove
dentures if any. Move exposed person to fresh air. Keep person warm
and at rest. If material has been swallowed and the exposed person is
conscious, give small quantities of water to drink. Stop if the exposed
person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the
head should be kept low so that vomit does not enter the lungs.
Chemical burns must be treated promptly by a physician. Never give
anything by mouth to an unconscious person. If unconscious, place in
recovery position and get medical attention immediately. Maintain an
open airway. Loosen tight clothing such as a collar, tie, belt or
waistband.
Skin contact Get medical attention immediately. Flush contaminated skin with plenty
of water. Continue to rinse for at least 10 minutes. Remove
contaminated clothing and shoes. Wash contaminated clothing
thoroughly with water before removing or wear gloves. Chemical burns
must be treated promptly by a physician. Wash clothing before reuse.
Clean shoes thoroughly before reuse.
Eye contact Get medical attention immediately. Immediately flush eyes with plenty of
water for at least 15 minutes, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Chemical burns must
be treated promptly by a physician.
Protection of first- No action shall be taken involving any personal risk or without suitable
aiders training. If it is suspected that fumes are still present, the rescuer should
wear an appropriate mask or self-contained breathing apparatus. It may
be dangerous to the person providing aid to give mouth-to-mouth
resuscitation. Wash contaminated clothing thoroughly with water before
removing or wear gloves.
Notes to physician Symptomatic treatment and supportive therapy as indicated.Administer
oxygen if necessary.Following severe exposure the patient should be
kept under medical review for at least 48 hours as delayed pulmonary
oedema may develop.
See section 11 for more detailed information on health effects and symptoms.
5. Firefighting measures
Extinguishing media Use an extinguishing agent suitable for the surrounding fire.
Suitable None known.
Not suitable No specific hazard.
Special exposure This material is harmful to aquatic organisms. Fire water contaminated
hazards with this material must be contained and prevented from being
discharged to any waterway,.

Hazardous thermal These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2
decomposition products etc.).
Special protective Fire-fighters should wear appropriate protective equipment and self-
equipment for fire- contained breathing apparatus (SCBA) with a full face-piece operated in
fighters positive pressure mode.
Safety Data Sheet of CEMTEX INJECTOR ACCELERATOR Concentrate COMP. II Page 3 of 6

6. Accidental release measures

Personal precautions Immediately contact emergency personnel. Keep unnecessary
personnel away. Use suitable protective equipment.
Environmental Avoid dispersal of spilt material and runoff and contact with soil,
precautions waterways, drains and sewers.
Methods for cleaning If emergency personnel are unavailable, contain spilt material. For small
up spills, add absorbent (soil may be used in the absence of other suitable
materials), scoop up material and place in a sealable, liquid-proof
container for disposal. For large spills, dyke spilt material or otherwise
contain material to ensure runoff does not reach a waterway. Place spilt
material in an appropriate container for disposal.
7. Handling and storage
Handling Do not ingest. Do not get in eyes or on skin or clothing. Keep container
closed. Use only with adequate ventilation. Do not breathe vapour or
mist. Avoid contact of spilt material and runoff with soil and surface
waterways. Wash thoroughly after handling.
Storage Keep container in a cool, well-ventilated area. Keep container tightly
closed and sealed until ready for use. Avoid all possible sources of
ignition (spark or flame).

Packaging materials Use original container.

Recommended
8. Exposure controls / personal protection
Recommended If this product contains ingredients with exposure limits, personal,
monitoring procedures workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control measures
and/or the necessity to use respiratory protective equipment. Reference
should be made to European Standard EN 689 for methods for the
assessment of exposure by inhalation to chemical agents and national
guidance documents for methods for the determination of hazardous
substances.
Exposure controls Use only with adequate ventilation. If user operations generate dust,
Occupational exposure fumes, vapour or mist, use process enclosures, local exhaust ventilation
controls or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits.
Respiratory protection Use a properly fitted, air-purifying or air-fed respirator complying with an
approved standard if a risk assessment indicates this is necessary.
Respirator selection must be based on known or anticipated exposure
levels, the hazards of the product and the safe working limits of the
selected respirator.
Hand protection Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical products if
a risk assessment indicates this is necessary.
Eye protection Safety eyewear complying with an approved standard should be used
when a risk assessment indicates this is necessary to avoid exposure to
liquid splashes, mists or dusts.
Skin protection Personal protective equipment for the body should be selected based on
the task being performed and the risks involved and should be approved
by a specialist before handling this product.
Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to remove
potentially contaminated clothing. Wash contaminated clothing before
reusing. Ensure that eyewash stations and safety showers are close to
the workstation location.
Safety Data Sheet of CEMTEX INJECTOR ACCELERATOR Concentrate COMP. II Page 4 of 6

Environmental Emissions from ventilation or work process equipment should be

exposure checked to ensure they comply with the requirements of environmental
controls protection legislation. In some cases, fume scrubbers, filters or
engineering modifications to the process equipment will be necessary to
reduce emissions to acceptable levels.
8. Physical and chemical properties
General information
Appearance
Physical state Liquid. (Liquid.)
Colour Colourless
Odour Amine-like
Odour threshold Not available.
Important health, safety and environmental information
pH 10.9 [Basic.]
Boiling point 188°C (370.4°F)
Melting point <-60°C (-76°F)
Flash point Closed cup: 73°C (163.4°F). (Pensky-Martens.) Open cup: 74°C
(165.2°F).
Explosive properties Not available.
Oxidising properties Not available.
Vapour pressure 0.077314 kPa (0.6 mm Hg) (at 20°C)
Relative density Not available.
Solubility Soluble in cold water.
Octanol/water partition Not available.
coefficient
Viscosity Not available.

Vapour density >1 (Air = 1)

Evaporation rate (butyl Not available.
acetate = 1)
Other information
Auto-ignition Not available.
temperature
9. Stability and reactivity
Stability Unstable.
Materials to avoid Reactive or incompatible with the following materials: oxidizing
materials, acids and alkalis.
Hazardous ecomposition These products are carbon oxides (CO, CO2), nitrogen oxides (NO, NO2
Products etc.).
10. Toxicological information
Potential acute health effects
Inhalation : Toxic by inhalation. Corrosive to the respiratory system.
Ingestion : Harmful if swallowed. May cause burns to mouth, throat and stomach.
Skin contact : Toxic in contact with skin. Corrosive to the skin.
Eye contact : Corrosive to eyes.

Acute toxicity
Product/ingredient Test LD50 ; Result 570 mg/kg; Route Oral; Species: Rat
name
dimethylaminoethyl) ether Test LD50; Result 750 mg/kg; Route Dermal; Species Rabbit

Test LC50; Result: 0.5 to 1.15 mg/l (4 hours); Route inhalation; Species
Rat

Potential chronic health effects

Carcinogenicity Not available.

Mutagenicity Non-mutagenic for bacteria and/or yeast. [Bis (2-dimethylaminoethyl)
Safety Data Sheet of CEMTEX INJECTOR ACCELERATOR Concentrate COMP. II Page 5 of 6

ether].
Reproductive toxicity Not available.
11. Ecological information
Ecotoxicity data Species Algae; Period 72 hour/hours; Result ppm 23 mg/l
Ingredient name Bis (2-
dimethylaminoethyl) ether
(IC50) hour/hours
Other ecological
information

Ingredient name LogPow -,54; BCF -; Potential low

Bis (2-dimethylaminoethyl)
ether
Other adverse effects Harmful to aquatic organisms. May cause long-term adverse effects in
the aquatic
environment.
13. Disposal considerations
Methods of disposal The generation of waste should be avoided or minimised wherever
possible. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional
local authority requirements.
European waste The relevant EU Directives and local, regional and national regulations
catalogue (EWC) must be complied with. It is among the tasks of the end user to assign
the waste to waste codes specific to industrial sectors and processes
according to the European Waste catalogue. It is recommended that the
details be agreed with the waste disposer responsible.
Hazardous waste The classification of the product may meet the criteria for a hazardous
waste.
14. Transport information
ADR Corrosive liquid, toxic n.o.s. Bis (2-dimethylaminoethyl) ether
IMDG Corrosive liquid, toxic n.o.s. Bis (2-dimethylaminoethyl) ether
IATA Corrosive liquid, toxic n.o.s. Bis (2-dimethylaminoethyl) ether
ADR/RID UN 2922 Class 8, Packking group II
Classification Classification Code CT1
Hazard identification number
86
CEFIC Tremcard 80GCT1-II+III
IMO/IMDG UN 2922 Class 8, Packking group II
Classification Emergency schedules (EmS) F-A, S-B
ICAO/IATA UN 2922 Class 8, Packking group II
Classification
15. Regulatory information
Hazard symbol(s) T Toxic
Risk phrases R23/24- Toxic by inhalation and in contact with skin.
R22- Harmful if swallowed.
R34- Causes burns.
R52/53- Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Safety phrases S26- In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
S36/37/39- Wear suitable protective clothing, gloves and eye/face
protection.
S45- In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
Contains Bis (2-dimethylaminoethyl) ether
Product use Classification and labelling have been performed according to EU
Directives
Safety Data Sheet of CEMTEX INJECTOR ACCELERATOR Concentrate COMP. II Page 6 of 6

67/548/EEC and 1999/45/EC (including amendments) and the intended

use. - Industrial applications.
Other EU regulations

Additional warning Not applicable.

phrases
16. Other information
Full text of R-phrases : R23/24- Toxic by inhalation and in contact with skin.
referred to in sections 2 R22- Harmful if swallowed.
and R34- Causes burns.
3 - United Kingdom R52/53- Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Full text of T - Toxic
classifications : C - Corrosive
referred to in sections 2 Xn - Harmful
and 3 - United Kingdom
(UK)
While the information and recommendations in this publication are to the best of our
knowledge, information
and belief accurate at the date of publication, NOTHING HEREIN IS TO BE CONSTRUED AS A
WARRANTY, EXPRESS OR OTHERWISE. IN ALL CASES, IT IS THE RESPONSIBILITY OF THE
USER TO DETERMINE THE APPLICABILITY OF SUCH INFORMATION AND
RECOMMENDATIONS AND THE SUITABILITY OF ANY PRODUCT FOR ITS OWN
PARTICULAR PURPOSE.
THE PRODUCT MAY PRESENT HAZARDS AND SHOULD BE USED WITH CAUTION. WHILE
CERTAIN HAZARDS ARE DESCRIBED IN THIS PUBLICATION, NO GUARANTEE IS MADE THAT
THESE ARE THE ONLY HAZARDS THAT EXIST.
Hazards, toxicity and behaviour of the products may differ when used with other materials and
are dependent upon the manufacturing circumstances or other processes. Such hazards,
toxicity and behaviour should be determined by the user and made known to handlers,
processors and end users.

Bygging Intercontinental
12 Shehab El Din St
Heliopolis – Cairo _ Egypt