Scribd
Upload
27 views5 pages

2018 ECEH Catalogo - Elettrohydraulic ECEH Series - Pagine Affiancate

Uploaded by

baldinig86
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views5 pages

2018 ECEH Catalogo - Elettrohydraulic ECEH Series - Pagine Affiancate

Uploaded by

baldinig86
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

ELECTRO-HYDRAULIC

ACTUATORS ECEH SERIES

ELFORCONTROLS
A C T U ATO R S A N D VA LV E A U TO M AT I O N
ELECTRO-HYDRAULIC ACTUATORS ECEH SERIES HYDRAULIC PUMP MOTOR FEATURES
ELFORCONTROLS ECEH series self-contained electro- resistance on external surfaces. The standard color is Motor Power Supply:
hydraulic actuators are used when a power source (instrument Orange RAL 2009, however can also be supplied in • AC: Single phase 110, 120, 230 VAC +/- 10% 50/60 Hz
air or hydraulic supply) is not available. accordance with specific customer painting specifications. • AC: Three phase 190 to 690 Vac +/-10% 50/60 Hz
The ECEH actuators are available in Double Acting or • DC: 24 Vdc
The system is designed to drive and control ¼” turn or linear Single Acting Spring Return versions, and due to a wide
actuators and is comprised of a hydraulic actuator, either actuator size range and spring availability, all torque value
CONTROL SYSTEM
linear or scotch yoke system coupled with an electric motor requirements can be satisfied. Power unit enclosure: Stainless Steel Box
driven pump with oil reservoir. Cable glands: Stainless Steel
ECEH electro-hydraulic actuators are suitable for modulating Electronic feedback indication is realized via a 4-20 mA
or ON/OFF applications. signal, or optional communications systems (Fieldbus, OPTIONS
Foundation, Profibus; Modbus; etc.).
Manual Override: Hydraulic Hand Pump Mounting: horizontal or vertical on board.
The ECEH actuators are equipped with an integrated control The self-contained system allows easy installation and
system, the actuator is driven by hydraulic controls with oil avoids all the maintenance costs linked to traditional GENERAL FEATURES
reservoir and a motorized power unit. hydraulic systems (separate hydraulic pump and tubing
An electric motor with oil reservoir and electrical control panel etc), which simplifies the system architecture and improves Manifold build reduces risk of oil leakage, eliminating potential leak path, improving reliability and vibration resistance.

is installed within a Stainless Steel box mounted directly onto safety and reliability. Ease of setting and maintenance.

the actuator. The modular design of the actuator allows low down Accumulator ensures instantaneous response to commands.

Hydraulic and Linear actuators are made completely of time maintenance on the mechanical parts, which can be Specific solenoid valves guarantee tight shutoff.

Carbon Steel components with epoxy paint for corrosion carried out simply on site by trained personnel. Limit switch box and PST option available.
Critical parts manufactured in 316 stainless steel to prevent corrosion:
• 316 stainless steel cabinet
• 316L / 316 tubing and fittings
ACTUATOR FEATURES
Manual hydraulic local control
Actuator Body - Carbon Steel
Local and remote operation
Scotch Yoke - Carbon steel Low number of components involved (reduced fail potential)
Spring Package - Carbon steel

External Paint Finish - Double epoxy coating (Orange RAL 2009 for standard or special under request)

Piping - Stainless Steel

Temperature Range -20°C to +55°C [-4°F to +131°F]

Output torque
• Double Acting torque to 60.000 Nm
• Single Acting torque starting torque 35.000 Nm
• Single Acting torque ending torque 25.000 Nm

Please refer to our other ranges of actuators, the ECK and EC for further details.

Example of cabinet with pump motor


APPROVALS

Actuators :
Example of cabinet mounted directly on board a compact
Safety integrity level - Suitable for use in SIL2 applications spring return actuator
Area classification - ATEX Exd IICT6

Enclosure standards - IEC 60529 – IP65

Pressure equipment directive PED - 2014/68/EU

Machinery directive - 2006/42/EC

Examples of hydraulic schematic


SPRING-RETURN SYSTEM TESTING OF SYSTEM
Spring Return: Up to 35.000/28.000 Nm (according to previous actuator features). All ELFOR CONTROLS products are tested prior shipment. We have designed and developed a dedicated equipment
bench to test all completed systems. A dedicated report is obtained by our software where all parameter can be easily
NOTE: Higher & Lower torques are available upon request set.
During the opening cycle, the motor operates and drives the hydraulic pump. The fluid is forced into the actuator cylinder
moving the actuator to the desired (Open or Closed) position.
A limit switch box sends a signal to the motor to stop, while the fluid will be blocked by closing a solenoid valve to
maintain the actuator position. To allow the actuator to move to the fail (Open or Closed) position with the spring, the
solenoid valves are opened allowing fluid to flow back to the reservoir.

DOUBLE-ACTING SYSTEM
Double Acting: up to 60.000 Nm.

NOTE: Higher & Lower torques are available upon request.


When energized, the motor operates and drives the hydraulic pump. The fluid is forced into the cylinder.
Double Acting actuators include a solenoid valve to control the direction of travel. A stop solenoid is used to maintain the
actuator position. Optional failsafe operation includes a normally open solenoid valve and an optional accumulator
ELFORCONTROLS
A C T U ATO R S A N D VA LV E A U TO M AT I O N

PNEUMATIC HYDRAULIC ELECTRIC


Quarter Turn Linear Multi Turn

Via Bastone 148/150, 24044 - Dalmine (BG) Italy Follow us


Phone: +39 (035)-567465 | Fax: +39 (035)-567466
[email protected] - www.elforcontrols.it
.it

You might also like