COLLEGE OF MARITIME EDUCATION

Document Name: PART D.

(BACHELOR OF SCIENCE IN MARINE ENGINEERING) DETAILED TEACHING
SYLLABUS

Document No.:

CONTROLLED

OUR LADY OF TRIUMPH INSTITUTE

OF TECHNOLOGY INC.
PAGADIAN CITY

Course Code / Descriptive Title: MACH 1 / HAND AND MEASURING TOOLS

STCW Competence/s Complied:

Cl: Appropriate use of hand tools, machine tools, and measuring instruments for fabrication and repair on board
KUP5: Safety measures to be taken to ensure safe working environment and for using hand tools, machine tools and
measuring instruments
KUP6: Use of hand tools, machine tools and measuring instruments
 REVISION HISTORY OF DETAILED TEACHING SYLLABUS OF

REVISION DETAILS
REV.NO. DATE
FROM TO
 Equipment,
Learning Indicativ
Topic Teaching-Learning Activities (TLA) Materials,
Outcome Assessment e Hours
References

Competence/s: A-III/1 Fl. Marine Engineering at the operational level

Cl: Appropriate use of hand tools, machine tools, and measuring instruments for fabrication and repair on board

C01: Demonstrate the safe and appropriate use of hand and power tools and Assessment of Course Outcome 1:
measuring instruments in accordance with accepted practice.
Practical Assessment on Demonstrate the safe and appropriate
use of hand and power tools and measuring instruments in
accordance with accepted practice.
KUP/s: A-III/1 Fl.
Cl: Appropriate use of hand tools, machine tools, and measuring instruments for fabrication and repair on board
KUP5: Safety measures to be taken to ensure safe working environment and for using hand tools, machine tools and
measuring instruments
KUP6: Use of hand tools, machine tools and measuring instruments

LO 1.1: Formative Assessment Topics: TA 1.1: - Multimedia 6 hours

presentations
L01.1. Explain Introduction to the Course and  PPT presentation - Handouts
the safety FA1-LEC Orientation  Distribution of fact - chalkboard
requirements in Written quiz on the safety  Safety Precaution Prior to sheets.
the use of the if: requirements in the use Working Safety Signs and  Discussion/ Q and A
of the if: hand tools power Posters  Explanation on the
a. hand tools tools measuring  Importance of Operation safety requirements in
instruments General Manual Safety/ Toolbox the use of the if: hand
b. power tools Meeting
workshop safety and tools power tools
c. measuring  Work Permits measuring instruments
housekeeping
instruments  Firefighting and Safety General workshop
Equipment Elementary First
safety and
d. General Aid Personal Protective
housekeeping
workshop safety Equipment
and  Good Housekeeping LA 1.1:
housekeeping  Risk Management and
Assessment The students will Explain the
safety requirements in the
use of the if: hand tools
power tools measuring
instruments General
workshop safety and
housekeeping
L01.2. Explain Formative Assessment Safety Precaution During Work TA 1.2: Multimedia 6 hours
the proper and presentations
FA2-LEC  Safety Use of Tools  PPT presentation - Handouts
safe use of
Quiz on the proper and  Hygiene and First Aid  Distribution of fact - chalkboard
different hand
safe use of different hand  Safety Awareness sheets.
tools in  Discussion/ Q and A
tools in accordance with  Emergency Situations
accordance with  Explanation on the
the code of safe working  Electrical Safety
the code of safe proper and safe use of
practices
working different hand tools in
practices accordance with the
code of safe working
practices
LA 1.2:
The students will Explain the
proper and safe use of
different hand tools in
accordance with the code of
safe working practices

L01.3. Practical Assessment TA 1.3: Multimedia 6 hours

Demonstrate the presentations
PA1-LAB  PPT presentation - Handouts
safe practices to
 Distribution of fact - chalkboard
be observed Demonstrate the safe sheets. -Machine Shop
during work practices to be observed  Discussion/ Q and A
while using Laboratory
during work while using  Demonstrate the safe
different hand different hand tools in practices to be
tools in accordance with the Code observed during work
accordance with of Safe Working Practices while using different
the Code of Safe hand tools in
Working accordance with the
Practices Code of Safe Working
Practices
 LA 1.3:
The students will
Demonstrate the safe
1ST PRELIM EXAMINATION
practices to be observed
during work while using
different hand tools in
accordance with the Code of
Safe Working Practices

L01.4. Explain Formative Assessment Measuring Instruments TA 1.4: Multimedia 6 hours

the proper and  Vernier Caliper presentations
FA3-LEC  PPT presentation - Handouts
safe use of  Micrometer Caliper
Written quiz on the  Distribution of fact - chalkboard
different  Surface gauge
proper and safe use of sheets.
measuring tools  Ruler  Discussion/ Q and A
different measuring tools
accordance with  Explanation on the
accordance with the code
the code of safe proper and safe use of
of safe working practices
working different measuring
practices tools accordance with
the code of safe
working practices
LA 1.4:
The students will Explain the
proper and safe use of
different measuring tools
accordance with the code of
safe working practices

LO 1.5. Practical Assessment TA 1.5: Multimedia 6 hours

Demonstrate presentations
PA2-LAB  PPT presentation - Handouts
safe use of
 Distribution of fact
common Demonstrate safe use of sheets. - chalkboard
measuring tools common measuring tools  Discussion/ Q and A -Machine Shop
used for the used for the fabrication  Demonstrate safe use Laboratory
fabrication and and repair onboard ship of common measuring -portable power
repair onboard tools used for the tools
ship fabrication and repair
onboard ship

LA 1.5:
The students will
Demonstrate safe use of
common measuring tools
used for the fabrication and
repair onboard ship

L01.6. Explain Formative Assessment Portable Power Tools TA 1.6: Multimedia 6 hours
the proper and presentations
FA4-LEC  Safety in the Use of Portable Power  PPT presentation - Handouts
safe use of
Written quiz on the Tools Pneumatic, Hydraulic, and  Distribution of fact - chalkboard
different power
proper and safe use of Electrical Power Tool sheets.
hand tools  Discussion/ Q and A
different power hand  Portable Power Drills
accordance with  Explanation on the
tools accordance with the  Portable Electric Saw
the code of safe proper and safe use of
code of safe working
working Portable Electric Grinder different power hand
practices
practices tools accordance with
the code of safe
working practices
LA 1.6:
The students will Explain the
proper and safe use of
 different power hand tools
accordance with the code of
safe working practices

L01.7. Practical Assessment TA 1.7: Multimedia 6 hours

Demonstrate presentations
PA3-LAB  PPT presentation - Handouts
safe use of
 Distribution of fact - chalkboard
common power Demonstrate safe use of sheets. -Machine Shop
hand tools used common power hand  Discussion/ Q and A
for the Laboratory
tools used for the  Demonstrate safe use -portable power
fabrication and fabrication and repair of common power tools
repair onboard onboard ship. hand tools used for the
ship. fabrication and repair
onboard ship.
LA 1.7:
The students will
Demonstrate safe use of
common power hand tools
2ND PRELIM EXAMINATION used for the fabrication and
repair onboard ship.

L02.1. Explain Formative Assessment Code of safe working practices TA 2.1: Multimedia 6 hours
the proper and presentations
FA5-LEC Measuring instruments  PPT presentation - Handouts
safe use of
Written quiz on the  Distribution of fact - chalkboard
different special  Vernier caliper
proper and safe use of sheets.
tools by  Micrometer  Discussion/ Q and A
different special tools by
machinery in  Filler gauge  Explanation on proper
machinery in accordance
accordance with  Ruler and safe use of
with its operations
its operations  Compass different special tools
manual
manual by machinery in
Operations Manual of:
  Auxiliary Engine accordance with its
 Purifier / Separator operations manual
 Air Compressor
LA 2.1:
 Pumps
The students will Explain the
proper and safe use of
different special tools by
machinery in accordance with
its operations manual

L0.2.2. Practical Assessment TA 2.2: Multimedia 6 hours

Demonstrate presentations
PA4-LAB  PPT presentation - Handouts
safe use of
 Distribution of fact - chalkboard
special tools Demonstrate safe use sheets. -measuring
used for the of special tools used  Discussion/ Q and A
fabrication and instruments
for the fabrication and  Demonstrate safe use -operations
repair onboard repair onboard ship. of special tools used manual of
ship. for the fabrication and auxiliary
repair onboard ship. machineries
-tools (Allen keys,
LA 2.2:
Wrenches, Puller,
The students will Hammers,
Demonstrate safe use of Screwdrivers)
special tools used for the
fabrication and repair
onboard ship.

L02.3. Perform Practical Assessment Selection of Appropriate Tools TA 2.3: Multimedia 6 hours
simple presentations
PA5-LAB  Allen keys  PPT presentation - Handouts
dismantling and
 Wrenches  Distribution of fact
assembling of Perform simple  Puller sheets. - chalkboard
mechanical parts dismantling and  Hammers  Discussion/ Q and A -measuring
using different assembling of mechanical  Demonstrate safe use instruments
Screwdrivers of special tools used -operations
non-cutting hand parts using different non-
tools. cutting hand tools. for the fabrication and manual of
repair onboard ship. auxiliary
machineries
LA 2.3: -tools(Allen keys,
Wrenches, Puller,
The students will Perform
Hammers,
simple dismantling and
Screwdrivers)
MIDTERM assembling of mechanical
parts using different non-
EXAMINATION cutting hand tools.

L02.4. Fabricate Practical Assessment Sawing and Cutting Tools TA 2.4: Multimedia 6 hours
a project with aid presentations
PA6-LAB  Selection of Appropriate Tools  PPT presentation - Handouts
of different hand
 Safety in the use of tools  Distribution of fact - chalkboard
and cutting Fabricate a project with
 Chisels sheets. -measuring
tools, following aid of different hand and  Discussion/ Q and A
 Punches instruments
specific cutting tools, following  Fabricate a project with -hand and cutting
 Gasket cutters
standards of specific standards of aid of different hand
 Pipe cutter and threading tools tools
measurements measurements indicated and cutting tools,
 Tube Cutter and Flaring Tools -workpiece
indicated in in marking sheet following specific
 Shears and Nippers
marking sheet standards of
measurements
indicated in marking
sheet
SEMI FINAL EXAMINATION
LA 2.4:
The students will Fabricate a
 project with aid of different
hand and cutting tools,
following specific standards
of measurements indicated in
marking sheet.

 L02.5. Practical Assessment Measuring Instruments TA 2.5: 6 hours

Demonstrate  Selection of Appropriate
the of PA7-LAB Tools  PPT presentation Multimedia
measuring  Safety in the Use of Tools  Distribution of fact presentations
Demonstrate the of sheets. - Handouts
instruments in measuring instruments in  Scales, Dials, and Gauges
fabrication of reading  Discussion/ Q and A - chalkboard
fabrication of the project  Demonstrate the of -measuring
the project following specific  Rulers and steel tapes
following  L-Square Dividers measuring instruments instruments
standards indicated in the
specific  Level Bar in fabrication of the
marking sheet.
standards  Depth Gauge project following
indicated in  Feeler Gauge specific standards
the marking  Screw Pitch Gauge indicated in the
sheet  Vernier caliper marking sheet
LA 2.5:
The students will
FINAL Demonstrate the of
measuring instruments in
EXAMINATION
fabrication of the project
following specific
standards indicated in the
marking sheet.
Competence/s: A III/1 - F1. Marine Engineering at the operational level
C2: Maintenance and repair of shipboard machinery and equipment

CO2: Demonstrate the safe and appropriate use of specialized tools and Assessment of Course Outcome 2:
measuring instruments being used for maintenance and repair of shipboard
Practical assessment on Demonstrate the safe and
machinery and equipment in accordance with accepted practice.
appropriate use of specialized tools and measuring
instruments being used for maintenance and repair of
shipboard machinery and equipment in accordance
with accepted practice.

KUP/s:
KUP4: The use of appropriate specialized tools and measuring instruments