Building Technologies

Control Products & Systems

Unrestricted © Siemens SA 2014 All rights reserved.

Page 1 2/14/2017
Table of content

qSiemens, The Company.

qIntroduction

qKNX system topology.

qSiemens Product range overview.

qDALI system topology.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 2 2/14/2017
Siemens, The Company
An Overview about Siemens History

Unrestricted © Siemens SA 2014 All rights reserved.

Page 3 2/14/2017
Siemens History

Siemens Timeline

1847 Founding of Siemens

1850 Sales Agency - London

1854 Railway Telegraph USA

1855 Branch in Russia

1904 Branch in China

1905 Branch in Brazil

1924 Branch in India

1954 Branch in Saudi Arabia

Unrestricted © Siemens SA 2014 All rights reserved.

Page 4 2/14/2017
Siemens Branches
Saudi Arabia

Head Office Regional Office Regional Office

Business Gate Al Azizia District Al Raja Tower
Riyadh Jeddah Al-Khobar

Unrestricted © Siemens SA 2014 All rights reserved.

Page 5 2/14/2017
Siemens Sectors & Divisions

Energy Healthcare Industry Infrastructure & Cities

Divisions Divisions Divisions Divisions

•Fossil Power •Imaging & Therapy •Industry Automation •Rail Systems
Generation Systems •Drive Technologies •Mobility and Logistics
•Wind Power •Clinical Products •Customer Services •Low and Medium
•Solar & Hydro •Diagnostics Voltage
•Oil & Gas •Customer Solutions •Smart Grid
•Energy Service •Building Technologies
•Power Transmission •OSRAM*

Unrestricted © Siemens SA 2014 All rights reserved.

Page 6 2/14/2017
Siemens / Infrastructure & Cities
Building Technologies Division

Fire Fight
BMS

ACCESS
KNX
Fire Alarm

CCTV
Energy Efficiency

Unrestricted © Siemens SA 2014 All rights reserved.

Page 7 2/14/2017
KNX advantage

KNX:
The worldwide
STANDARD for
Home and Building Control

Unrestricted © Siemens SA 2014 All rights reserved.

2/14/2017 Page 8
 KNX - The World’s Only Open STANDARD

Approved Standard for more than 20 years

International Standard (ISO/IEC 14543-3)

European Standard (CENELEC EN 500090, CEN EN 13321-1)

More than 400 KNX manufacturers in 41 countries

399 Certified training centers in 61 countries

Over 7,000 KNX certified products

References all over the world

Unrestricted © Siemens SA 2014 All rights reserved.

Page 9 2/14/2017
GAMMA Markets

i. Home Automation

§ Private houses and condominiums

§ High level of functional integration (ie:
Shutters, Alarm, AV, Video Access Control,
Remote Access)
§ The market focus is very narrow
§ Style and design are key
§ Siemens Sm@rt Living

Unrestricted © Siemens SA 2014 All rights reserved.

2/14/2017 Page 10
GAMMA Markets

ii. Lighting Control Systems

(2-wire control)

§ Building and architectural lighting

§ Focus primarily on lighting
§ Possibility to integrate with the BMS
§ The scope is wide
§ Cost is Key

Unrestricted © Siemens SA 2014 All rights reserved.

2/14/2017 Page 11
 GAMMA Markets

iii. Hotel Guest Room Control

§ Hotels and service apartments

§ Public area lighting, in room lighting and
hotel guest room management system
§ Option to integrate with the BMS system
§ Broad, but specialized market
§ Cost and design are key
§ Every hotel wants a solution tailored to their
needs, off the shelf standard design switch
modules are generally not sufficient.

Unrestricted © Siemens SA 2014 All rights reserved.

2/14/2017 Page 12
 GAMMA Markets

iv. Innovative Energy Saving Projects

§ Commercial Buildings
§ Lighting control with a focus on energy
saving technology
(ie: occupancy, light level, brightness..)
§ A narrow but ever expanding market where
customers are focused on efficiency and
savings
§ Technology and integration is the key

Unrestricted © Siemens SA 2014 All rights reserved.

2/14/2017 Page 13
 GAMMA KNX function

Lighting control

Venetion blind control

Integration of single applications

Heating and aircond. control

Energy and load management

Operating and monitoring

Unrestricted © Siemens SA 2014 All rights reserved.

2/14/2017 Page 14
 KNX System Topology

• Line ：up to 64 devices

• Area ：up to 15 lines
• System：up to 15 areas

Unrestricted © Siemens SA 2014 All rights reserved.

2/14/2017 Page 15
 KNX Topology

TCP/IP

The cable delivers the bus via red/black pair and secondary power where needed via the yellow/white pair (bus is powered at nominally 29Vdc)
IP Router

Line
2
Line Power Supply
Coupler

1 2 3 5 6 63 64
4

Line
1
Line Power Supply
Coupler

AREA #1
Power Supply 1 2 3 5 6 63 64
4
Unrestricted © Siemens SA 2014 All rights reserved.
Page 16 2/14/2017
KNX Topology
LC PS System 1

Each System Has 15 Areas LC PS

X
LC LC LC LC PS LC LC

PS PS PS PS PS
LC LC LC LC PS LC LC
01 01 01 01 01
Each Area Has 15 Lines PS PS PS PS PS
LC LC LC LC LC
01 01 01 01 01

X
PS PS PS PS PS

01 01 01 01 01
64 64 64 64 64
LC PS
Each Line Has 64 Devices 01 02 03 14 15 Area 1
64 64 64 64 64
LC LC LC LC LC
Area 2
=
01 02 03 14 15
PS PS PS 64 64 64 PS PS 64 64

01 01 01 01 02 03 01 01 14 15 Area 3
14,,400 KNX Devices
14

PS: Power Supply.

LC: Line Coupler. 64 64 64 64 64

01 02 03 14 15 Area15
Unrestricted © Siemens SA 2014 All rights reserved.
Page 17 2/14/2017
KNXnet/IP – IP network

N125/21
Power supply

N146/02
IP router

Unrestricted © Siemens SA 2014 All rights reserved.

Page 18 2/14/2017
GAMMA : Product range

Display, Operation Combination modular installation devices

User-friendly display and control devices from the GAMMA instabus range, suitable for all Combine inputs and outputs to devices for flexible application.
requirements.

Output Devices Lighting

Analog and binary output devices. Everything you need for lighting control – from dimming to light level control.

Input devices Sun/anti-glare protection

Analog and binary input devices process physical characteristics and relay them via bus. Optimum sun and anti-glare protection with maximum utilization of daylight.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 19 2/14/2017
GAMMA : Product range

Heating, ventilation, air-conditioning Control/automation devices

Always the right temperature – energy-saving and user-friendly. Logic modules, time/event modules, scene modules, time switches and accessories.

Gateways System products

Connection to DALI, Ethernet/IP, RF, phone, infrared, USB, RS 232, LOGO! and SIMATIC S7. Bus coupling units, line couplers, network gateways, power supplies and reactors.

Physical sensors System accessories

Information on motion/presence, temperature, wind, fire, water and brightness. Bus terminals, connectors, data rails and overvoltage protection.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 20 2/14/2017
Switching Actuators

Modular Switching
Actuators
3x 10 AX N 562/11 N

3x 16 AX 512/11
N 513/11

3x 20 AX N 562/21 N
512/21 N
513/21

Unrestricted © Siemens SA 2014 All rights reserved.

Page 21 2/14/2017
Switching Actuators

N 562/11 Switching Actuators – Main modules

• 3x 230/400 V AC, 10 AX,
C-load (140 μF), load check

N 512/11 Switching Actuators – Main modules

• 3x 230/400 V AC, 16 AX,
C-load (200 μF), load check

N 513/11 Switching Actuators – Main modules

• 3x 230/400 V AC, 20 AX,
C-load (200 μF), load check

AC1: refers to the switching of mainly resistive loads (p.f. = 0.8)

AC3: refers to an (inductive) motor load (p.f. = 0.45)
AX: refers to a (capacitive) fluorescent lamp load
Unrestricted © Siemens SA 2014 All rights reserved.
Page 22 2/14/2017
Switching Actuators

N 562/21 Switching Actuators – Submodules

• 3x 230/400 V AC, 10 AX,
C-load (140 μF), load check

N 512/21 Switching Actuators – Submodules

• 3x 230/400 V AC, 16 AX,
C-load (200 μF), load check

N 513/21 Switching Actuators – Submodules

• 3x 230/400 V AC, 20 AX,
C-load (200 μF), load check

AC1: refers to the switching of mainly resistive loads (p.f. = 0.8)

AC3: refers to an (inductive) motor load (p.f. = 0.45)
AX: refers to a (capacitive) fluorescent lamp load
Unrestricted © Siemens SA 2014 All rights reserved.
Page 23 2/14/2017
Switching Actuators

Switching actuator 15-channel, main module with four submodules 1) 2)

KNX

I202_01453
230 V AC

1) The block diagram shown here is just an example of how modules can be interconnected and interfaced. For more detailed information, please
refer to the technical documentation available at: www.siemens.com/gamma-td.
2) All modules with the imprint 10 AX, 16 AX and 20 AX are fully interoperable and therefore can be used together.
Unrestricted © Siemens SA 2014 All rights reserved.
Page 24 2/14/2017
Switching Actuators

Display and Operating Elements of Main modules

Opening for
bus terminal block
Jack for bridge connector
Commissioning LED
Commissioning pushbutton

LED for display of the selected

module

LED for display of

LED for status display of
direct mode
the output

Pushbutton for toggling between bus /

Pushbutton for toggling of the output
direct mode and selection of
a submodule

Screw terminals for

single-core wires up to 4 mm²

Unrestricted © Siemens SA 2014 All rights reserved.

Page 25 2/14/2017
Switching Actuators

• Up to 4 submodules can be connected with a main module; so switching actuators can be generated with
• 3 outputs
• 6 outputs
• 9 outputs
• 12 outputs
• 15 outputs

Highlights
• Load current recording and monitoring
• Save load current as set point value
• Detection of a significant equipment failures
• operating hours counter per output
• Warning signal in night or time mode,
the light flashing briefly 3 times warns of impending OFF

Unrestricted © Siemens SA 2014 All rights reserved.

Page 26 2/14/2017
Switching actuator N567/22 (16x 10A)

§ Housing: DIN-rail mounting

§ Width: 8 SU (1 SU = 18mm)
§ Order number: 5WG1 567-1AB22

Green LED for displaying

the operating voltage Pushbutton for
direct operation
Pushbutton for of a channel
switching-over
between bus and
direct operation
LED for display of
the switching-status
Yellow LED for displaying
the direct operation

Unrestricted © Siemens SA 2014 All rights reserved.

Seite 27 2/14/2017
Switching actuator N567/22 (16x 10A)

Adjustable per channel:

§ Normal mode / timer mode
§ Relay mode (normally open contact / normally closed contact)
§ Logic operation (AND, OR)
§ ON- / OFF-delay
§ Night mode with time-limited ON-period
§ Warning of imminent switching OFF during operation
as timer or in night mode L1
§ Pre-selection of a switching-state per output after L2
mains voltage recovery L3
N

Unrestricted © Siemens SA 2014 All rights reserved.

Seite 28 2/14/2017
Blind Actuators

Blind Actuators
4 x AC 230 V, 6 A N 523/04

8x AC 230 V, 6A
N 523/11

Unrestricted © Siemens SA 2014 All rights reserved.

Page 29 2/14/2017
Dimmer Control System

Dimming Functions

§ Phase Control Dimmer

• Incandescent
• Halogen

§ Analog 1-10 V (with ECGs)

• Fluorescent
• Compact Fluorescent

§ DALI (with ECGs)

• Fluorescent
• LED

Unrestricted © Siemens SA 2014 All rights reserved.

Page 30 2/14/2017
Phase Control Dimmers
20...500 VA 20...500 VA 20...1000 VA

N 527/31 N 527/41 20...300 VA N 527/51

20...300 VA

Main Submodules
modules

Unrestricted © Siemens SA 2014 All rights reserved.

N 528/31 N 528/41
Page 31 2/14/2017
Dimmer Control System (Phase Control)

N 528/31 Universal Dimmer – Main modules

• 20 … 300 VA, 230 V AC, 50/60 Hz

N 527/31 Universal Dimmer – Main modules

• 20 … 500 VA, 230 V AC, 50/60 Hz

Highlights
• Electronic protection of output against overload
and short circuit and over temperature
• Signaling of overloads, short circuits and
over temperature over the bus
• Warning of impending OFF by dimming to 50%
of the previous dimming value during night
and timer mode

Unrestricted © Siemens SA 2014 All rights reserved.

Page 32 2/14/2017
Dimmer Control System (Phase Control)

N 528/41 Universal Dimmer – Expansions

• 20 … 300 VA, 230 V AC, 50/60 Hz

N 527/41 Universal Dimmer – Expansions

• 20 … 500 VA, 230 V AC, 50/60 Hz

N 527/51 Universal Dimmer – Expansions

• 20 … 1000 VA, 230 V AC, 50/60 Hz

Unrestricted © Siemens SA 2014 All rights reserved.

Page 33 2/14/2017
Dimmer Control System (Phase Control)

1) The block diagram shown here is just an example of how modules can be interconnected and interfaced. For more detailed information, please
refer to the technical documentation available at: www.siemens.com/gamma-td.
2) All modules with the imprint 300 VA, 500 VA and 1000 VA are fully interoperable and therefore can be used together.
Unrestricted © Siemens SA 2014 All rights reserved.
Page 34 2/14/2017
Dimmer Control System (Phase Control)

1) The block diagram shown here is just an example of how modules can be interconnected and interfaced. For more detailed information, please
refer to the technical documentation available at: www.siemens.com/gamma-td.
2) All modules with the imprint 300 VA, 500 VA and 1000 VA are fully interoperable and therefore can be used together.
Unrestricted © Siemens SA 2014 All rights reserved.
Page 35 2/14/2017
Dimmer Control System (1-10 V)

N 526E02 Switching/Dimming actuators

• 8 switching output, 230 V AC, 16A
• 8 control voltage, 1 … 10 V DC

Unrestricted © Siemens SA 2014 All rights reserved.

Page 36 2/14/2017
Dimmer Control System (1-10V vs. DALI)

Wiring of lighting groups with 1 … 10 V controls

Unrestricted © Siemens SA 2014 All rights reserved.

Page 37 2/14/2017
KNX/DALI Gateway

N 141/03 KNX / DALI Gateway , 1 channel

N 141/21 KNX / DALI Gateway, 2 channels

Unrestricted © Siemens SA 2014 All rights reserved.

Seite 38 2/14/2017
 DALI
OVERVIEW

L1 L2 L3
Light groups are not fixed to the wiring ! KNX EIB

Independent planning
of control wires and
mains voltage wiring !
DALI

EIB

Only one control wire to all of the luminaires !

Unrestricted © Siemens SA 2014 All rights reserved.
Page 39 2/14/2017
Dimmer Control System (1-10 V vs. DALI)

Wiring of lighting groups with DALI

1) Light groups are not hard-wired, Planning is easier and faster .

2) Lower fire load due to fewer cables.
Unrestricted © Siemens SA 2014 All rights reserved.
Page 40 2/14/2017
1-10 VOLTS SYSTEM VS DALI

—————————————————— 28 m ——————————————————

————————12 m ———————
1...10 V Technology

—
Investment Additional functions via DALI:
-15% - Lamp failure detection
- ECG failure detection
- Dimming status

1-10V DALI
Unrestricted © Siemens SA 2014 All rights reserved.
Page 41 2/14/2017
 Wiring of light groups with DALI- interface

Light groups are not fied to the wiring !

L1 L2 L3
KNX

DALI

EIB

Independant planning of control wires and mains voltage wiring !

Mains voltage has not to be switched ! Only one control wire to all of the luminaires !
Unrestricted © Siemens SA 2014 All rights reserved.
Page 42 2/14/2017
N125/x2 Power Supplies

New generation of KNX power supplies:

N125/02 Power Supply, 160mA

N125/12 Power Supply, 320mA
N125/22 Power Supply, 640mA

Unrestricted © Siemens SA 2014 All rights reserved.

Page 43 2/14/2017
N 125/x2 Power supplies
Features

§Bus voltage via pressure contacts onto data rail and via bus
terminal block
§Screwless terminals for quick insertion of line voltage wire
§Reset via slider switch
§Display of
• Reset (red LED)
• ON (green LED)
• Overload (red LED)
§Auxiliary power output, DC 29V,
on all power supplies

Unrestricted © Siemens SA 2014 All rights reserved.

Page 44 2/14/2017
N 146/02 IP Router

Communication using the

KNXnet/IP standard opens up
completely new applications for building
management systems such
as the operation of equipment in
distributed locations through existing
data networks.
• Simple system design and access
at any time from any place thanks
to KNXnet/IP

N 146/02

Unrestricted © Siemens SA 2014 All rights reserved.

Page 45 2/14/2017
 Wall switches new generation

• Uniform bus coupling unit for lower planning costs

• Uniform application program for easier and faster

commissioning

• Integrated scene controller,

room temperature sensor and IR receiver
decoder for maximum functionality

Unrestricted © Siemens SA 2014 All rights reserved.

Page 46 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

The GAMMA instabus pushbuttons along with the

corresponding
• DELTA line,
• DELTA miro,
• DELTA profil or
• DELTA style
frames are plugged onto a bus coupling unit (BTM).

i-system style profil

Unrestricted © Siemens SA 2014 All rights reserved.

Page 47 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

i-system
• UP 221/2 pushbuttons 1)2)
Single, neutral
• UP 221/3 pushbuttons 1)2)
Single, with status LED, neutral

• UP 222/2 pushbuttons 1)2)

Double, neutral
• UP 222/3 pushbuttons 1)2)
Double, with status LED, neutral

1) The bus coupling unit (BTM) must be ordered separately.

2) The matching design frame must be ordered separately.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 48 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

i-system
• UP 223/2 pushbuttons 1)2)
Triple, neutral
• UP 223/3 pushbuttons 1)2)
Triple, with status LED, neutral
• UP 223/4 pushbuttons 1)2)
Triple, with status LED, scene controller and
room temperature sensor, neutral
• UP 223/5 pushbuttons 1)2)
Triple, with status LED, scene controller and IR
receiver decoder, neutral

1) The bus coupling unit (BTM) must be ordered separately.

2) The matching design frame must be ordered separately.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 49 2/14/2017
Function with Design

DELTA miro – glass

crystal green/ white/ arena/ orient/ black/
aluminum metallic titanium white electrical white carbon metallic aluminum metallic

DELTA miro – aluminum

oxide yellow/ nature/ graphite/ titanium/ nature/
titanium white aluminum metallic titanium white carbon metallic titanium white

Unrestricted © Siemens SA 2014 All rights reserved.

Page 50 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

DELTA profil
• UP 241/2 pushbuttons 1)2)
Single, neutral
• UP 241/3 pushbuttons 1)2)
Single, with status LED, neutral

• UP 243/2 pushbuttons 1)2)

Double, neutral
• UP 243/3 pushbuttons 1)2)
Double, with status LED, neutral
1) The bus coupling unit (BTM) must be ordered separately.
2) The matching design frame must be ordered separately.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 51 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

DELTA profil
• UP 245/2 pushbuttons 1)2)
Quadruple, neutral
• UP 245/3 pushbuttons 1)2)
Quadruple, with status LED, neutral
• UP 245/4 pushbuttons 1)2)
Quadruple, with status LED, scene controller
and room temperature sensor, neutral
• UP 245/5 pushbuttons 1)2)
Quadruple, with status LED, scene controller
and IR receiver decoder, neutral

1) The bus coupling unit (BTM) must be ordered separately.

2) The matching design frame must be ordered separately.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 52 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

DELTA style
• UP 285/2 pushbuttons 1)2)
Single, neutral
• UP 285/3 pushbuttons 1)2)
Single, with status LED, neutral

• UP 286/2 pushbuttons 1)2)

Double, neutral
• UP 286/3 pushbuttons 1)2)
Double, with status LED, neutral
1) The bus coupling unit (BTM) must be ordered separately.
2) The matching design frame must be ordered separately.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 53 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

DELTA style
• UP 287/2 pushbuttons 1)2)
Quadruple, neutral
• UP 287/3 pushbuttons 1)2)
Quadruple, with status LED, neutral
• UP 287/4 pushbuttons 1)2)
Quadruple, with status LED, scene controller and
room temperature sensor, neutral
• UP 287/5 pushbuttons 1)2)
Quadruple, with status LED, scene controller and
IR receiver decoder, neutral

1) The bus coupling unit (BTM) must be ordered separately.

2) The matching design frame must be ordered separately.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 54 2/14/2017
 GAMMA instabus pushbuttons –
Wide design variety with maximum functionality

System products
• UP 117/11 bus coupling units (BTM)
Mounting depth 16 mm

Unrestricted © Siemens SA 2014 All rights reserved.

Page 55 2/14/2017
 UP220 + DELTA pushbutton – with switches

03

UP220/21 , UP220/31
pushbutton interface

DELTA Sytle pushbutton

5TG1 321: single frame
5TG7 141: rocker
5TD2 120v:Pushbuttons, 1 NO contact
Unrestricted © Siemens SA 2014 All rights reserved.
Page 56 2/14/2017
 UP220 + DELTA pushbutton – with dual switches

03

UP220/21 , UP220/31
pushbutton interface

DELTA Sytle pushbutton

5TG1 321: single frame
5TG7 141: rocker
5TD2 120v:Pushbuttons, 1 NO contact
Unrestricted © Siemens SA 2014 All rights reserved.
Page 57 2/14/2017
UP 588/13 and /23 Touch Panels

• UP 588/131 touch panels 1) 2

Rated operational voltage:
230 V AC, 50 Hz

• UP 588/132 touch panels 1) 2

Rated operational voltage:
AC/DC 24 V

1) The required design frame must be

ordered separately.
2) The flush-mounting/hollow-wall box must start.exe
be ordered separately.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 58 2/14/2017
UP 588/13 and /23 Touch Panels
Accessories

Design frames
for UP 588/13, UP 588/23 touch panels
• Aluminum (W x H x D): 194 x 156 x 5 mm

• Stainless steel design (W x H x D):

194 x 156 x 5 mm

• Black glass (W x H x D): 194 x 156 x 5 mm

• White glass (W x H x D): 194 x 156 x 5 mm

Flush-mounting/hollow-wall boxes
for UP 588 touch panels
• Dimensions (W x H x D): 161.5 x 135 x 64 mm

Unrestricted © Siemens SA 2014 All rights reserved.

Page 59 2/14/2017
UP 588/13 and /23 Touch Panels

Display and operate

The color touch panel serves as a multifunctional display / operating
device for GAMMA instabus building management systems based on
worldwide KNX standards according to ISO/IEC 14543.
It sets itself apart through:
• TFT color display
• Analog touch screen in 4-wire technology
• Size: 5.7"
• 320 x 240 pixels, ¼ VGA
• Color intensity, 263 K (RGB, 6 bit)
• Brightness of display, typically 280 cd/m²
• LED background lighting, wear-resistant
• 4 menu designs: magic, modern, classic, elegant

Unrestricted © Siemens SA 2014 All rights reserved.

Page 60 2/14/2017
UP 588/13 and /23 Touch Panels

Design frame, Design frame,

black glass, stainless steel,
menu design menu design
"magic" "modern"

Design frame, Design frame,

white glass, aluminum,
menu design menu design
"classic" "elegant"

Unrestricted © Siemens SA 2014 All rights reserved.

Page 61 2/14/2017
Contouch UP 204

Contouch UP 204

Piano black

Aluminum metallic

Carbon metallic

Unrestricted © Siemens SA 2014 All rights reserved. Titanium white

Page 62 2/14/2017
Display and operate with KNX

Summary of all functions:

• 110 KNX functions of 20 control- and display pages
• 4 different design templates (magic, modern, classic, elegant)
• time programmes with weekly schedules
• presence simulation
• scenes control (64 internal scenes)
• logic functions (32 logic gate with 4 inputs and one output)
• alarm display (up to 76 alarm functions or event tasks)
• real time clock (function as master timer)
• password protection for all main pages and configuration pages
• trending module (graphic trend representation over the time)
• configurable slide show

Unrestricted © Siemens SA 2014 All rights reserved.

Page 63 2/14/2017
Presence control

Automatic detection of presence in

the room
• Reduced energy costs for
• Lighting à Up to 50% reduced energy use possible
• Heating and cooling

Unrestricted © Siemens SA 2014 All rights reserved.

Page 64 2/14/2017
Technical Data
Presence Sensor

§ Power supply via bus line

§ Presence detection (PIR)

- Range:

- for monitoring of an area

from 3 x 3 m up to approx. 5 x 5 m
(dependent on the mounting resp. ceiling height)

§ Brightness measurement
- Measuring range: 20...1000 Lux

§ IR receiver
- for remote control
- max. distance
detector <–> remote control: ~ 4.5 m

Unrestricted © Siemens SA 2014 All rights reserved.

Page 65 2/14/2017
Glass Touch Sensor

071_Touch_sensor_glass_EN_Mpeg4_720p_HQ.mp4

Unrestricted © Siemens SA 2014 All rights reserved.

Page 66 2/14/2017
What is the KNX programming tool?

KNX software ETS

The manufacturer independent Engineering Tool Software enables to

project, commission, document and diagnose a KNX installation.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 67 2/14/2017
Contact page

• Wael Ammar
Value Added Partners Account Manager
Infrastructure & Cities / Building Technologies / Control Products &
Systems
Business Gate, Building “C”
11423 Riyadh

Phone: +966 (11) 277 - 8686

Fax: +966 (11) 277 - 8497
Mobile: +966 54 197 9302
E-mail:
[email protected]

Answers for infrastructure and cities.

Unrestricted © Siemens SA 2014 All rights reserved.

Page 68 2/14/2017