A-10 Series RS-485 Remote IO Module

ATC remote RS-485 I/O module, support Modbus RTU/ASCII protocol, can be
applied to the full range of ATC controller. And it also can communicate with
other devices that support the Modbus RTU/ASCII protocol, host computer
communication or remote command control. It can make the series of
module work in Bus network and the I/O points can flexible expansion.

Part No. A-1057 A-1058 A-1068 A-1069 A-1051 A-1055 A-1055S A-1060

Operation Voltage 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC

Status Low：<1VDC Status Low：<1VDC Status Low：<1VDC Status Low：<1VDC

Inputs — — — — 16 8 8 8
Status High：>5~30VDC Status High：>5~30VDC Status High：>5~30VDC Status High：>5~30VDC

Outputs 12, Source Transistor 12, Sink Transistor 8, Signal Relay 8, Power Relay — 8, Sink Transistor 8, Source Transistor 4, Power Relay

10 ~ 40VDC 120VAC(0.5A)/ 250VAC(5A)/ 10 ~ 40VDC 250VAC(5A)/

Continuous Current 10 ~ 35VDC(1A) — 10 ~ 35VDC(1A)
(200mA) 30VDC(1A) 30VDC(1A) (200mA) 30VDC(1A)

Communication Baud Rate 1200 ~ 115200bps

Communication Interface RS - 485

Protocol MODBUS RTU / MODBUS ASCII

Data Bits 8 Bits

Parity Odd Parity / Even Parity / None

Stop Bit 1/2 Bit

Isolation YES（5000VDC）

Input Operating Frequency 10Hz

Output Operating Frequency Relay: 10Hz / Transistor：10Hz

Operation Temperature -20 to +75℃

Degree Of Protection IP20

Installation 35 mm DIN rail / Flush mounting

Dimension（W×H×D） 76.4×118.2×38.5 mm
Part No. A-1019 A-1012 A-1010
Operation Voltage 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC 10 ~ 30VDC/24VAC
Status Low：<1VDC Status Low：<1VDC
Inputs 4 2 —
Status High：>5~30VDC Status High：>5~30VDC
Outputs — 2, Source Transistor 4, Sink Transistor
Continuous Current — 10 ~ 35VDC(1A) 10 ~ 40VDC(200mA)
Communication Baud Rate 2400 ~ 921600bps
Protocol MODBUS RTU / MODBUS ASCII
Data Bits 8 Bits
Parity Odd Parity / Even Parity / None
Stop Bit 1/2 Bit
Isolation YES（5000VDC）
Input Operating Frequency 10Hz
Output Operating Frequency Transistor：10Hz
Analog Inputs 8（16 bit） 4（16 bit） 8（10 bit）
Analog Input Type 0/4~20mA,J,K,T,E,R,S,B,Thermistor(-270 ~ +1800℃) 2*0/4-20mA + 2*PT100/1000(-200 ~ +600℃) 0 ~ 10V
Analog Outputs — 2（12 bit） 2（10 bit）
Analog Output Type — 0/4-20mA 0 ~ 10V
Input Impedance Current: 100Ω / Voltage: 10MΩ Current: 100Ω / RTD: 10MΩ Voltage: 10MΩ
Analog Input / Output Accuracy ±0.1% / — ±0.1% / ±1% ±1% / ±1%
Communication Interface RS-485 + USB RS-485
Channel Independent Configuration Yes
Sampling Rate 10 sample/second（Total）
CMR @ 50/60 Hz 120 dB
Span Drift ±50 ppm/℃
Zero Drift ±18 μV/℃
(PT-100:-200~+600℃) (PT-1000:-200~+600℃) (J:-210~760℃) (K:-270~1,370℃) (T:-270~400℃) (E:-270~1,000℃) (R:0~1,750℃)
(S:0~1,750℃) (B:0~1,800℃) (Thermistor-10K-T2:0~100℃) (Thermistor-10K-T3:0~100℃) (Thermistor-6.8K:-10~100℃)
Temperature Ranges (Thermistor-4.7K:-10~100℃) (Thermistor-3.3K:-20~100℃) (Thermistor-3K:-20~100℃) (Thermistor-2.7K:-20~100℃)
(Thermistor-2.252K:-20~100℃) (Thermistor-2.1K:-30~100℃) (Thermistor-2K:-30~100℃) (Thermistor-1.5K:-40~100℃)
(Thermistor-1K:-40~100℃)
Operation Temperature -20 to +75℃
Degree Of Protection IP20
Installation 35 mm DIN rail / Flush mounting
Dimension（W×H×D） 76.4*118.2*38.5 mm
 Dimension：

 Pin Table：
 Wiring Diagrams & Pin Out
Contact us
Shenzhen ATC Technology Co., Ltd
Room 803, Block B, Building 4, Tian'an Cyber Park, Longgang District, Shenzhen,China,518172
Tel: +86-755 - 8345 2531 / 8345 3318 Fax: +86-755-2899 8985
Website: www.szatc.com E-mail: [email protected]