Scribd
Upload
28 views1 page

PHOSBRAZ-AG50

Phosbraz

Uploaded by

francis.d.jasmin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views1 page

PHOSBRAZ-AG50

Phosbraz

Uploaded by

francis.d.jasmin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PHOSBRAZ AG50

Cu-P-Ag 5% Manual brazing

TECHNICAL DATA SHEET 125

Specifications:

Alloy Working NF EN ISO 17672 AWS A-5.8 DIN 8513 EN ISO 3677 AMS
Temperature (˚C)
Cu-P-Ag 710 CuP 281 BCuP3 L-Ag5P B Cu 89 P Ag 645-815 -

Characteristics:
PHOSBRAZ AG50 is CuP alloy with Silver and lowers the liquids point, the greater the ductility of the brazed joint. This addition
also refines the alloy, increasing the brazed joints mechanical characteristics and improving electrical conductivity. This is special
alloy for high strength capillary brazing.
This brazing alloy is not recommended to be used for the media having sulphur. Also it is not allowed to use for joining steels (Fe)
or materials containing Iron (Fe), Nickel (Ni), Cobalt (Co) as it will form brittle phase in the joint. The corrosion resistance of this
alloy is comparable to that of copper excepts, when the joint is exposed to sulphur containing gas or at elevated temperatures..
Under these conditions, it is expected that, this alloy will undergo progressive deterioration as other copper phosphorus alloy with
Silver or without Silver.
Applications:
PHOSBRAZ AG50 is recommended for hard brazing of copper and optionally copper brass pipes of
combustible installations. As well as all low temperature applications. In Air conditioning and refrigeration
application, PHOSBRAZ AG50 can be used for the service temperature between +150˚C (without loss in
strength) to -50˚C. This alloy can be used with flame.
Typical Chemical Compositions (%):
Cu P Ag Bi Cd Pb Zn Al Zn + Cd Max.
impurities
Reminder 6.00 5.00 <0.030 <0.01 <0.025 <0.050 <0.01 <0.05 <0.25
Typical Physical Properties:
Colour Solidus Liquidus Density Elongation Tensile strength Electrical Electrical Resistivity
(˚C) (˚C) g/cm 3 % (MPa) Conductivity (Micro-ohm-cm)
(%IACS)

Copper 645 815 8.2 8% 650 9.6 18.1

Properties of Brazed Joint:


The properties of a brazed joint dependent upon numerous factors including base metal properties, joint
design, metallurgical interactions between the base metal and the filler metal.

Standard size and types:


Size (mm) Type
Bare Coated Coil Preforms

1.50 , 2.00, 2.50, 3.00 √ √ − √ √ √ Χ Χ

Preform sizes and other type other than above standard dimensions are solicited case to case basis

Liability: This document is intended to assist the user in choosing the product. It is up to the user to verify that the chosen product is suitable for applications for which it is intended. The company FSH
Welding Group reserves the right to alter specifications without prior notice of its products. The descriptions, illustrations and specifications are for reference only and cannot be held liable for FSH Welding
Group. Fumes: Consult information on MSDS, available upon request.
www.fsh-welding.com - [email protected]
Rev 09/2016

You might also like