Compact Oil Damped

Bracket Black/Sst
Installation Manual
Manual No. IM0701200 R1-6

May 2010
English

Art. No. 0701200

0701210

0701200 Compact Oil Damped Bracket Black

0701210 Compact Oil Damped Bracket Sst

ORLACO PRODUCTS BV
Albert Plesmanstraat 42, 3772 MN Barneveld
PO Box 193, 3770 AD Barneveld
Netherlands

Phone: +31 (0) 342 404555

Fax: +31 (0) 342 404556
E-mail: [email protected]
Internet: http://www.orlaco.com
 Installation Manual
Compact Oil Damped Bracked Black
Article number 0701200
Compact Oil Damped Bracked Sst
Article number 0701210

Safety
In order to guarantee safe operation, these safety instruc-
tions must be read before you start using this equipment.

• Do not open the enclosure. This can cause damage

• Do not expose the equipment to extreme temperatures.
This can cause deformation of the enclosure or damage to Optional sets; data sheets are available.
internal components.
• Repairs or adjustments to the equipment may only be
undertaken by Orlaco.
• The equipment must be assembled as shown in this
manual.

Before you start using this equipment, please read this manual carefully
and follow all instructions. This installation manual describes the func-
tions of the equipment, outlines the connection options and explains how
to put the equipment into operation. We recommend that you keep this
manual in a safe place for reference purposes.
Article No. 0910240 Article No. 0910250
If you have any questions or issues concerning the operation of this Quick Release Set Weld version Quick Release Set Bolt version
equipment, consult the relevant section in the manual or contact the
Orlaco Products BV Service department.

The camera/display systems from Orlaco comply with the latest CE,
ADR and EMC regulations. All products are manufactured in accordance
with the ISO 9001 quality management system, ISO/TS16949 quality
automotive and ISO 14001 environmental management systems and all
Ex products with the IECEx scheme and ATEX directives.

Available documentation Article No. 0910260 Article No. 0910270

DS0701200 Compact Oil Damped Bracket Black Mounting Bracket Set Additional Suspension Tube Complete
DS0701210 Compact Oil Damped Bracket Sst
DS0910240 Quick Release Set Weld version
DS0910250 Quick Release Set Bolt version
DS0910260 Mounting Bracket Set Additional
NOTE:
DS0910270 Suspension Tube Complete The Camera Bracket and Mounting Bracket are not included.

Contents Page

1. Introduction 3
2. Mounting 3
2.1. Mounting Camera Bracket 3
2.2. Fitting to the crane with the optional Adapter pin 3
2.3. Mounting to a crane with Mounting Bracket Set
Additional 3
3. Deflection Compact Oil Damped Bracket to the Mast 4
3.1. Adjusting damper 4
3.2. Adjusting camera angle 4
4. Maintenance and cleaning 4
5. Product specifications 5
5.1. Compact Oil Damped Bracket Black; Article No. 0701200 5
5.2. Compact Oil Damped Bracket Sst; Article No. 0701210 5
6. Dimensions 5
7. Disposal 6
8. General terms and conditions 6

2 IM0701200 R1-6
 Installation Manual
1. Introduction Lock nut Stainless steel A2 M6
Designed for usage on cranes to have a camera pointed downwards
Washer Stainless steel A2 M6
perpendicular. The damper absorbs sudden movements and procure
stability to all Orlaco cameras. Cameras of Orlaco have been balanced by Compact Oil Damped Unit
the factory. Other cameras have to be checked to determine the position
of their centre of gravity.

2. Mounting
2.1. Mounting Camera Bracket
Mount the Camera Bracket (NOT included; Camera Bracket is included
with AFZ Camera) to the Compact Oil Damped Unit with the included
mounting parts see figure 1. Use the following bolts nuts and washers.
• 4x Lock nut stainless steel A2 M6
• 4x Washer stainless steel A2 M6
Camera Bracket
• 4x Washer ST6 100 HV
• 4x Button head screw stainless steel M6 x 16
The optional safety chain can be mounted parallel with this to the camera
bracket. Washer ST6 100 HV

2.2. Fitting to the crane with the optional Adapter pin. Button head screw Stainless steel M6 x 16
By using the Adapter pin Art. No. 2013280, the Suspension tube Art No.
0910270 should be fitted to the mast as shown in figure 2.
Always mount the suspension tube in line with the axis of the hoist gear.
Use the Lock pin to mount the camera to the Suspension tube. Use the
included Support plates to weld the Suspension tube firmly and square Safety chain
to the mast. The Safety chain should be fitted to the mast, not to the
Suspension tube.

Note that the holes in the Suspension tube for the Lock
pin in the right way at an angle of 45° to the mast is Figure 1
welded, see overview mast positions in figure 4.
Always mount the suspension
tube in line with the axis
Note: Please do not weld without permission of the crane owner of the hoist gear

2.3. Mounting to a crane with Mounting Bracket Set Additional

(The Mounting Bracket is NOT included). Using the Mounting Bracket Set Support plates
Additional, Art. No. 0910260, the Compact Oil Damped Bracked can be welded to the mast
mounted in different ways to the crane. (Square!)
When mounting the Mounting Bracket Set Additional; 2 bolts M8 and 2 45°
M8 washers are supplied. See figure 3.

The Safety chain should

be fitted to the mast,
not to the Suspension tube.

Figure 2
Figure 3

I II III IV
46,6

2 x ∅9,0
3 x 33,5

2 x ∅9,0

IM0701200 R1-6 3
 Installation Manual
3. Deflection Compact Oil Damped Bracket to the mast
The maximum deflection of the Compact OGB is 74° to the left and 74° to
the right, see figure 4 and 5.

3.1. Adjusting damper

45°
It is possible to adjust the damping using the socket head wrench pro-
vided. Place the socket head wrench into the adjusting screw (A). Turn to
45°
+; provides maximum damping; use this position in the summer. 45°
Turn to -; provides minimum damping; use this position in the winter. The
damping can be felt by turning the shaft and simultaneously turning the
adjusting screw (A). See figure 5.

74,0°
74,0°
3.2. Adjusting Camera angle 45,0
0° 74 45,0°
1. Set the crane in the highest working position. 45, ,0° 0°
°
74,0° 74, 74,0°
2. Turn the bolt (1) up until the hoisting hook is shown in the
centre of the monitor.
3. Lock the bolt with nut (2). See figure 6.

Figure 4
Safety remark: fix this nut (2, Fig. 6) extra well!

A
4. Maintenance and cleaning.
This product should NOT be cleaned with harsh chemicals or abrasive
cleaners.

74 °
° 74

Rotation angle:
74° to the right
74° to the left
Figure 5

1
Max.

Figure 6

4 IM0701200 R1-6
 Installation Manual
5. Product specifications 6. Dimensions
5.1. Compact Oil Damped Bracket Black; Article No. 0701200
Housing: Material: AIMgSi1. Treadment: Black Nituff (PTFE Coated ac-
cording Mil-A-63576 type II). Offshore proof following IEC 60068-2-52.
Mounting hardware: Stainless steel.

101
264,6
Operating temperature: -40ºC ...- +85ºC.
Oil filling: Univis HVI 26 or alternative with kinematic viscosity 896 at
-40 ºC (Total volume = 40,23 cc).
Protection: Oil-filled and waterproof IP68 according to IEC 60529. The 74
bracket can withstand high pressure cleaning. 80 ° °
74
Weight: 3,4 kg (Compact OGB, Mounting bracket and Camera bracket).
Expected lifetime: 7-10 years. Rotation angle:
Max. mast speed: 2º/sec. 74° to the right
74° to the left
5.2. Compact Oil Damped Bracket Sst; Article No. 0701210
Housing: Stainless steel. AlSl 316, Brushed. ∅ 9.0 (2x)
Mounting hardware: Stainless steel. 137
Operating temperature: -40ºC ...- +85ºC.
Oil filling: Univis HVI 26 or alternative with kinematic viscosity 896 at

45
67,5
-40 ºC (Total volume = 40,23 cc).
Protection: Oil-filled and waterproof IP68 according to IEC 60529. The

130

109,1
45
bracket can withstand high pressure cleaning.

45
Weight: 6,1kg (Compact OGB, Mounting bracket and Camera bracket)
Expected lifetime: 7-10 years.
Max. mast speed: 2º/sec. M8 x 1,25 - 6H
35
Units in mm
N.B.: Bracket can be used in EX zone type 1 or 2: As the magnesium
Figure 7
percentage is below 6% (aluminium value between 0,6-1,2%).

IM0701200 R1-6 5
 Installation Manual
7. Disposal
Disassembly, removal and disposal. Local regulations for dealing with
waste must be followed when disposing of disassembled components or
entire units.

8. General terms and conditions

Orlaco Products BV is not liable for damage resulting from inadequate
servicing, incorrect usage or alterations made to the equipment without
informing the manufacturer in writing.

This installation manual has been made available by Orlaco Products

BV. All rights reserved. No part of this manual may be reproduced and/
or made public in printed form, in photocopy form or on microfilm, or in
any other way, without the prior written permission of Orlaco. This also
applies to the associated drawings and figures.

Orlaco reserves the right to make changes to components at any time

without informing customers beforehand or directly. All dimensions given
are for commercial purposes.

For information regarding repairs that is not covered in this manual,

please contact the Orlaco Products BV service department.

This manual has been prepared with all due care and attention. However,
Orlaco Products BV cannot be held responsible for any errors in this
manual or any consequences thereof.

6 IM0701200 R1-6
 Notes

IM0701200 R1-6 7
 ORLACO
Orlaco is a Manufacturing company that specializes in making cameras
and monitor systems for commercial vehicles, fork-lift trucks, cranes, off
shore and maritime.

Our objective is to design and produce camera systems for the profes-
sional market that improve the drivers’ view and increase operating
efficiency.

At our facility in Barneveld we locate our design, manufacturing, ware-

housing and service department.

Vision is our mission. Orlaco therefore deploys the development,

manufacture, supply and service of camera and display systems that will
improve safety and efficiency of all vehicles,
machinery and vessels. Our systems give the end user a view on each
blind spot and will create comfort and improved working conditions. Our
active approach will support market demands and innovations and will
lead to enthusiastic ambassadors in the market; our customers.

For more information: www.orlaco.com

Date: Dealer:

Name:

Initials: