R

NEWAY OIL EQUIPMENT

Neway Oil Equipment (Suzhou) Co., Ltd

Cat no.：E-V-2018

API 6A VALVES
Address: No.999 Xiangjiang Road,
Suzhou New District, P.R.China
Tel: 0512-6708-1952
Fax: 0512-66618930-4715
Email: [email protected]
Website: www.newayoilequipment.com
Post: 215129 NEWAY OIL EQUIPMENT (SUZHOU) CO., LTD
Cat No.：E-V-2018
 How to Order Material Selection

Figure Number Example: ⑤ Material Selection

Size

Surface Treatment
GEN 2-1/16’’ 5M FLG DD-NL PU PSL2 PR1

Material Type
① ② ③ ④ ⑤ ⑥ ⑦ ⑧

EE-0.5

EE-1.5
DD-NL

HH-NL
EE-NL

FF-0.5

FF-1.5

FF-NL
Parts
Following descriptions provide a basic guideline in valve specification:
① Valve type ZG30CrMo -
Valve type Symbol Valve type Symbol AISI 4130 -
Expanding Gate Valve GEN Multiple Orifice Choke CM Valve ASTM A217-CA15 -
Expanding Gate Valve(high temperature) GEH Trunnion Mounted Ball Valve BS AISI 410 -
Slab Gate Valve GBC Trunnion Mounted Ball Valve BT AISI 4130 CLAD
Slab Gate Valve(lip seal) GBS Metallic Sealing Ball Valve BTM
Ball Screw Gate Valve GBSR Regular Check Valve LC
AISI 4130 -
Frac Service Gate Valve GBW Regular Check Valve SC
Plug & Cage Control Choke CAP Full-opening Check Valve SF Bonnet AISI 410 -
External Sleeve Control Choke CAE Mud Valve GA AISI 4130 CLAD
Adjustable Needle Choke CAN Mud Valve GA75
Positive Choke CP Globe Valve GL
AISI 4130 QPQ
17-4PH QPQ
② Size Stem AISI 410 QPQ
in 1-13/16 2-1/16 2-9/16 3-1/16 3-1/8 4-1/16 5-1/8 6-3/8 6-5/8 7-1/16 9 INCONEL 718 -
mm 46 52 65 78 79 103 130 162 168 178 228
AISI 4130 QPQ
③ Working Pressure
AISI 4130 TC
Symbol 2M 3M 5M 10M 15M 20M AISI 410 QPQ
MPa 13.8 20.7 34.5 69.0 103.5 138.0
Gate AISI 410 TC
psi 2,000 3,000 5,000 10,000 15,000 20,000
AISI 410 STL
④ End Connection 17-4PH QPQ
INCONEL 718 -
Symbol FLG LP NU EU H W
End Flange End Pipeline Thread Tubing Thread EU Thread Hub Connection Weld Connection
AISI 4130 QPQ
⑤ Material Selection AISI 4130 TC

Please find the detailed sheet on the next page. AISI 410 QPQ
Seat AISI 410 TC
Ratin
⑥ Temperature Rating AISI 410 STL
17-4PH QPQ
Symbol Range(℉） Range(℃） -
INCONEL 725/718
K -75 180 -60 82
L -50 180 -46 82
N -50 140 -46 60 Carbon Steel ZINC
P -20 180 -29 82 Bonnet Ring SS316 -
S 0 140 -18 60 INCONEL 625 -
T 0 180 -18 82
U 0 250 -18 121
V 35 250 2 121
X 0 350 0 180 Notes:
Y 0 650 0 345
Symbol Meaning
⑦ Product Specification Level CLAD Surface Overlay
QPQ Nitriding
Symbol PSL1 PSL2 PSL3 PSL3G PSL4 TC Tungsten Carbide
Testing Type Hydrostatic Test Hydrostatic Test Hydrostatic Test Hydrostatic & Gas Test Hydrostatic & Gas Test STL Stellite Inlay
Traceability No No Yes Yes Yes

⑧ Product Performance Requirement

Symbol PR1 PR2

2 3
 Product Range

Size Size

Working Pressure
Working Pressure
Valve Type Valve Type

1-13/16’’
1-13/16’’

2-1/16’’

2-9/16’’

3-1/16’’

4-1/16’’

7-1/16’’
2-1/16’’

2-9/16’’

3-1/16’’

4-1/16’’

7-1/16’’

3-1/8’’

5-1/8’’
3-1/8’’

5-1/8’’

11’’
11’’

9’’
9’’
2,000 2,000
3,000 3,000
GEN 5,000 5,000
CAP 10,000
15,000
2,000
20,000
3,000
GEH 5,000
2,000
3,000
2,000
5,000
3,000 CAE 10,000
5,000
GBC 15,000
10,000

Choke Valve
20,000
15,000
20,000
2,000
3,000
2,000 CAN 5,000
3,000 10,000
5,000 15,000
GBS
10,000
15,000 2,000
20,000 3,000
CP 5,000
5,000 10,000
10,000 15,000
GBSR
15,000
20,000 2,000
3,000
3,000 5,000
Gate Valve

5,000 CM
10,000
GBW
10,000 15,000
15,000 20,000
20,000
3,000
BS

Ball Valve
10,000 5,000
GBFL
20,000
2,000
2,000 BT 3,000
3,000 5,000
5,000
GA 7,500 5,000
BTM
10,000 10,000

3,000 BEM 10,000

5,000
2,000
10,000
AH 3,000
15,000

Check Valve
5,000
20,000 LC
10,000
15,000
3,000
20,000
5,000
10,000
AC 3,000
15,000
SC 5,000
10,000
3,000
5,000
SF 10,000
DH 10,000
15,000
3,000
20,000 GL
Globe Valve 5,000

3,000 Plug Valve PL 15,000

5,000
AP 10,000
15,000
20,000

3,000
5,000
10,000
AD
15,000

4 5
 Expanding Gate Valve GEN GEN Expanding Gate Valve

Description

The GE Gate Valve, with expanding split gate design, non-rising stem and all kinds of sealing provide Dimensions for flanged end GE

safe, dependable service in applications of 2000 to 5000 psi WP. It is available in sizes from 2-1/16” A:Flange face to face
B:Bore centerline to bottom of valve
through 4-1/16” with threaded and 2-1/16 " through 7-1/16" with flanged ends. It is available in trims for all
C:Bore centerline to handwheel top
D:Handwheel diameter
types of oilfield service.

2,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 11.62 295 4.92 125 18.50 470 11.02 280 99 45 13
2-9/16’’ 2.56 65.1 13.12 333 5.91 150 19.29 490 12.99 330 143 65 15
3-1/8’’ 3.13 79.4 14.12 359 7.28 185 21.65 550 12.99 330 220 100 20
4-1/16’’ 4.06 103.2 17.12 435 8.86 225 25.00 635 15.75 400 353 205 24
7-1/16’’ 7.06 179.4 26.12 664 14.17 360 32.48 825 25.59 650 1146 520 39

3,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 14.62 371 5.31 135 18.31 465 12.99 330 165 75 13
2-9/16’’ 2.56 65.1 16.62 422 5.91 150 19.49 495 15.75 400 220 100 15
Features 3-1/8’’ 3.13 79.4 17.12 435 7.28 185 21.85 555 15.75 400 276 125 20
4-1/16’’ 4.06 103.2 20.12 511 8.86 225 25.59 650 18.90 480 573 260 24
It is available in two sealing types, double sealing and metal to metal sealing. 7-1/16’’ 7.06 179.4 28.12 714 14.17 360 32.48 825 29.92 760 1235 560 39

Expanding gate design creates a positive mechanical seal across seat, with or without line pressure;

The valve has a preferred direction of installation (marked with an arrow on the valve body) .

Gate skirts reduce loss of body lubricants. 5,000 psi Working Pressure
Upper/lower thrust bearings are isolated from well fluid, minimizing torque.
Size Bore A B C D Weight Full open /close
Stem packing can be re-energized with the valve under pressure. in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 14.62 371 5.31 135 18.50 470 12.99 330 154 70 13
Non-rising stem permits valve installation in closer quarters.
2-9/16’’ 2.56 65.1 16.62 422 5.91 150 19.49 495 15.75 400 220 100 15
3-1/8’’ 3.13 79.4 18.62 473 7.28 185 21.85 555 15.75 400 320 145 20
Approved Certification 4-1/16’’ 4.06 103.2 21.62 549 9.06 230 25.39 645 18.90 480 573 260 24
7-1/16’’ 7.06 179.4 32.00 813 13.98 355 32.68 830 29.92 760 1433 650 39
PR2 Product Test, Issued by LR

CE/PED For API 6A Product, Issued by DNV

6 7
 Expanding Gate Valve GEN GEH Expanding Gate Valve

Description

Dimensions for threaded end GE The GE Gate Valve, with expanding split gate design, non-rising stem and all kinds of sealing provide

A: Thread face to face safe, dependable service in applications of 2000 to 5000 psi WP. It is available in sizes from 2-1/16”
B: Bore centerline to bottom of valve
through 4-1/16” with threaded and 2-1/16 " through 7-1/16" with flanged ends. The valve is suitable for
C: Bore centerline to handwheel top
D: Handwheel diameter
thermal recovery wellhead.

2,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 9.65 245 4.92 125 18.50 470 11.02 280 99 45 13
2-9/16’’ 2.56 65.1 10.24 260 5.91 150 19.29 490 12.99 330 132 60 15
3-1/8’’ 3.13 79.4 11.42 290 7.28 185 21.65 550 12.99 330 198 85 20
4-1/16’’ 4.06 103.2 12.99 330 8.86 225 25.00 635 12.99 330 276 150 24

3,000 psi Working Pressure

Features
Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 8.86 225 4.92 125 18.70 475 12.99 330 110 50 13
2-9/16’’ 2.56 65.1 10.24 260 5.91 150 19.49 495 15.75 400 143 65 15
Seat is welded to the valve body which decrease the sealing face.
3-1/8’’ 3.13 79.4 11.42 290 7.28 185 21.85 555 15.75 400 198 90 20
4-1/16’’ 4.06 103.2 12.99 330 9.06 230 26.38 670 20.00 508 276 190 24
Metal to metal sealing between seat & gate to ensure the sealing performance of Y level temperature.

Gate: parallel expanding ,with spring which can appropriately increase the pressure between the seat at any

time to ensure the sealing .

Disc and seat sealing surface through nitriding, spray welding and HVOF to improve the quality, ensure the

5,000 psi Working Pressure sealing and prolong the service life.

Size Bore A B C D Weight Full open /close Stem with double packing design, improved the seal performance of the valve stem.

in mm in mm in mm in mm in mm lb kg Turn Count The bonnet is equipped with cooling structure, which can effectively inhibit heat conduction upwards and protect
2-1/16’’ 2.06 52.4 8.86 225 4.92 125 18.70 475 12.99 330 110 50 13
the seals.
2-9/16’’ 2.56 65.1 10.24 260 5.91 150 19.49 495 15.75 400 143 65 15
3-1/8’’ 3.13 79.4 11.42 290 7.28 185 21.85 555 15.75 400 198 90 20 Bearing space sleeve is equipped with grease fitting which can prolong the service life of bearing and lower
4-1/16’’’ 4.06 103.2 12.99 330 9.06 230 25.39 645 18.90 480 419 190 24
operating torque.

Valve is equipped with heavy-duty thrust bearing, reduce the operating torque.

8 9
 Expanding Gate Valve GEH GBC Slab Gate Valve

Description

Dimensions for flanged end GEH The GBC Gate Valve is a field-proven valve that provides reliability and interchangeability. The valve is

A: Flange face to face available in a wide variety of trim configurations to suit all service conditions. Valves are also available
B: Bore centerline to bottom of valve
prepared for an actuator of the customer's choice or equipped with a Neway Pneumatic Diaphragm,
C: Bore centerline to handwheel top
D: Handwheel diameter
Pneumatic Piston or Hydraulic Actuator. It is available in pressure ratings from 2000 to 20,000 psi and

bore sizes of 1-13/16” to 7-1/16”.

2,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 11.62 295 4.92 125 24.80 630 11.02 280 99 45 13
4-1/16’’ 4.06 103.2 17.12 435 9.06 230 44.09 1120 15.75 400 276 150 24

3,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16 ’’ 2.06 52.4 14.62 371 4.92 125 24.80 630 12.99 330 165 75 13
3-1/8 ’’ 3.13 79.4 17.12 435 7.68 195 25.79 655 15.75 400 276 125 20 Features
4-1/16’’ 4.06 103.2 20.12 511 9.45 240 44.09 1120 18.90 480 573 260 24
GBC slab gate valves are full bore, through conduit design, non-rising stem, symmetrical, bi-directional

design without a preferred direction of operation.

5,000 psi Working Pressure Bearing cap grease fitting allows positive bearing lubrication.

Stem can be back seated to allow stem seal replacement with the valve under pressure(For safety purposes,
Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count it’s suggested to replace packing after releasing pressure).
2-1/16’’ 2.06 52.4 14.62 371 4.92 125 24.80 630 12.99 330 154 70 13 Grease injection fitting is located on the bonnets, for lubricating stem, and gate. It can also be used to test

the back seat integrity.

Positive metal-to-metal sealing (gate-to-seat and seat-to-body).

Special modified ACME threads at the gate-to-stem connection provide sufficient freedom of movement to

creating effect a positive downstream seal.

Handwheel can be easily removed/reassembled by means of a screw and nut.

Approved Certification
PR2 Product Test, Issued by DNV & LR

CE/PED For API 6A Product, Issued by DNV

API607/6FA Fire Safe Test, Issued by LR

10 11
 Slab Gate Valve GBC GBC Slab Gate Valve

10,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
Dimensions for flanged end GBC
in mm in mm in mm in mm in mm lb kg Turn Count
1-13/16’’ 1.81 46.1 18.27 464 5.15 131 21.74 552 14.00 356 187 85 12
A:Flange face to face
B:Bore centerline to bottom of valve 2-1/16’’ 2.06 52.4 20.51 521 5.75 146 21.54 547 18.50 470 265 120 12

C:Bore centerline to handwheel top 2-9/16’’ 2.56 65.1 22.24 565 6.69 170 22.36 568 18.50 470 309 140 15
D:Handwheel diameter 3-1/16’’ 3.06 77.8 24.37 619 8.19 208 23.23 590 24.02 610 452 205 18
4-1/16’’ 4.06 103.2 26.38 670 9.84 250 26.26 667 24.00 610 805 365 23
5-1/8’’ 5.13 130.2 29.02 737 13.11 333 28.94 735 24.02 610 1312 595 35

2,000 psi Working Pressure

15,000 psi Working Pressure
Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Size Bore A B C D Weight Full open /close
Turn Count
2-1/16’’ 2.06 52.4 11.61 295 5.00 127 18.90 480 14.02 356 112 51 12 in mm in mm in mm in mm in mm lb kg Turn Count
2-9/16’’ 2.56 65.1 16.61 422 6.34 161 22.36 568 14.00 356 208 95 15 1-13/16’’ 1.81 46.1 17.99 457 5.63 143 21.65 550 18.50 470 309 140 12

3-1/8’’ 3.13 79.4 18.62 473 7.48 190 22.83 580 17.01 432 320 145 18 2-1/16’’ 2.06 52.4 19.02 483 6.69 170 21.54 547 18.50 470 298 135 12

4-1/16’’ 4.06 103.2 17.13 435 8.98 228 22.64 575 15.16 385 397 180 23 2-9/16’’ 2.56 65.1 20.98 533 6.69 170 24.61 625 18.50 470 529 240 16
3-1/16’’ 3.06 77.8 23.54 598 9.49 241 27.76 705 24.00 610 827 375 15
4-1/16’’ 4.06 103.2 29.02 737 10.28 261 29.53 750 24.00 610 1091 495 29

3,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
20,000 psi Working Pressure
2-1/16’’ 2.06 52.4 14.61 371 5.28 134 20.67 525 14.00 356 165 75 12
Size Bore A B C D Weight Full open /close
2-9/16’’ 2.56 65.1 16.61 422 6.34 161 22.36 568 14.00 356 208 95 15
in mm in mm in mm in mm in mm lb kg Turn Count
3-1/8’’ 3.13 79.4 17.13 435 7.01 178 22.74 578 17.00 432 262 119 18
1-13/16’’ 1.66 42.1 20.98 533 5.82 148 21.58 548 18.50 470 474 215 12
4-1/16’’ 4.06 103.2 20.12 511 9.37 238 25.12 638 18.50 470 496 225 23
5-1/8’’ 5.13 130.2 24.13 613 11.38 289 26.38 670 24.02 610 926 420 29
7-1/16’’ 7.13 181.0 28.11 714 14.63 372 34.25 870 24.02 610 1620 735 48

5,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 14.61 371 5.32 135 21.65 550 14.00 356 165 75 12
2-9/16’’ 2.56 65.1 16.61 422 6.00 153 22.44 570 14.00 356 231 105 15
3-1/8’’ 3.13 79.4 18.62 473 7.56 192 22.64 575 17.00 432 320 145 18
4-1/16’’ 4.06 103.2 21.61 549 9.65 245 25.20 640 18.50 470 529 240 23
5-1/8’’ 5.13 130.2 28.62 727 11.22 285 28.15 715 24.00 610 959 435 29
7-1/16’’ 7.13 181.0 32.01 813 14.63 372 34.25 870 24.02 610 1984 900 48
9’’ 9.00 228.6 40.98 1041 18.50 470 45.28 1150 - Gear Box 3748 1700 40

12 13
 Slab Gate Valve GBC GBS Slab Gate Valve
Description

The GBS Gate Valve is manufactured in accordance with API 6A and NACE MR 0175 and widely

recognized as a high quality valve for all types of applications. The GBS is a full-bore, through-conduit
Dimensions for threaded end GBC
valve available in standard double flange, threaded-end and special block body configurations. It is
A:Thread face to face
B:Bore centerline to bottom of valve available in pressure ratings from 2000 to 20,000 psi and bore sizes of 1-13/16” to 7-1/16”.
C:Bore centerline to handwheel top
D:Handwheel diameter
Features
Grease injection fitting is located on the bonnet, for

lubricating stem, stem nut and gate.

2,000 psi Working Pressure In addition to the metal-to-metal seal between the

Size Bore A B C D Weight Full open /close seats and gate, GBS gate valves incorporate two

in mm in mm in mm in mm in mm lb kg Turn Count spring-loaded, pressure-energized structures.

2-1/16’’ 2.06 52.4 8.98 228 5.00 127 18.90 480 14.02 356 99 45 12
The structure can sense the spring supply load to
2-9/16’’ 2.56 65.1 12.20 310 6.34 161 22.36 568 14.00 356 208 95 15
3-1/8’’ 3.13 79.4 13.39 340 7.48 190 22.52 572 17.01 432 276 125 18 seal when there is low pressures and lip seal to
4-1/16’’ 4.06 103.2 15.43 392 8.98 228 22.52 572 18.50 470 331 150 23
seal when there is high pressure. Non-

electrometric lip-seal between each seat and the

body. This kind of structure protects the metal

3,000 psi Working Pressure
seal surface of the seat and gate from damage and
Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg improves valve performance at very low pressures. Bearing cap grease fitting allows positive bearing
Turn Count
2-1/16’’ 2.06 52.4 9.61 244 5.39 137 21.57 548 14.00 356 115 52 12 This double-seal design provides maximum lubrication.
2-9/16’’ 2.56 65.1 12.20 310 6.34 161 22.36 568 14.00 356 208 95 15
protection against intrusion of particles into the Stem can be back seated to allow stem seal
3-1/8’’ 3.13 79.4 13.39 340 7.56 192 22.74 578 17.00 432 262 119 18
4-1/16’’ 4.06 103.2 15.43 392 9.37 238 25.12 638 18.50 470 496 225 23 valve cavity, prevents sand particles from replacement with the valve under pressure(For

affecting the metal-to-metal seal between the body safety purposes, it’s suggested to replace packing

and seats and gate and also prevents body erosion after releasing pressure).
5,000 psi Working Pressure in drilling mud applications. Metal-to-metal bonnet seal, (pressure energized at

Size Bore A B C D Weight Full open /close Positive metal-to-metal sealing (gate-to-seat and 10,000 psi WP and above).
in mm in mm in mm in mm in mm lb kg Turn Count
seat-to-body). The stem packing is a pressure energized seal and
2-1/16’’ 2.06 52.4 9.61 244 5.39 137 21.46 545 14.02 356 132 60 12
2-9/16’’ 2.56 65.1 16.61 422 6.00 153 22.38 569 14.00 356 220 100 15 Simple, reliable gate and seat design promotes can withstand severe temperatures and fluids. It is
3-1/8’’ 3.13 79.4 18.62 473 7.56 192 22.64 575 17.00 432 322 146 18
ease of field service. constructed of a non-elastomeric material that offers
4-1/16’’ 4.06 103.2 21.61 549 9.65 245 25.12 638 18.46 469 525 238 23
Bi-directional design provides flow direction a low coefficient of friction.

versatility and increased service life. Compatible with a wide range of actuators.

Approved Certification
PR2 Product Test, Issued by DNV

CE/PED For API 6A Product, Issued by DNV

ABS For API 6A Product, Issued by ABS

14 15
 Slab Gate Valve GBS GBS Slab Gate Valve

Dimensions for flanged end GBS Dimensions for welded end GBS

A:Flange face to face A:Weld face to face

B:Bore centerline to bottom of valve B:Bore centerline to bottom of valve
C:Bore centerline to handwheel top C:Bore centerline to handwheel top
D:Handwheel diameter D:Handwheel diameter

5,000 psi Working Pressure 3,000 psi Working Pressure

Size Bore A B C D Weight Full open /close Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 14.61 371 5.28 134 21.61 549 14.02 356 165 75 12 2-1/16’’ 2.06 52.4 10.63 270 5.28 134 21.61 549 14.02 356 132 60 12
2-9/16’’ 2.56 65.1 16.61 422 6.34 161 22.36 568 14.00 356 209 95 15 2-9/16’’ 2.56 65.1 12.36 314 6.34 161 22.36 568 14.00 356 172 78 15
3-1/8’’ 3.13 79.4 18.62 473 7.48 190 22.52 572 17.01 432 320 145 18 3-1/8’’ 3.13 79.4 13.62 346 7.48 190 22.52 572 17.01 432 320 145 18
4-1/16’’ 4.06 103.2 21.61 549 9.65 245 24.99 635 17.72 450 507 230 24
5-1/8’’ 5.13 130.2 28.62 727 11.38 289 27.36 695 24.00 610 1102 500 28
7-1/16’’ 7.06 179.4 32.01 813 14.63 372 51.97 1320 42.91 1090 1984 900 48
5,000 psi Working Pressure
Size Bore A B C D Weight Full open /close
10,000 psi Working Pressure in mm in mm in mm in mm in mm lb kg Turn Count
5-1/8’’ 5.13 130.2 28.62 727 11.02 280 20.47 520 23.62 600 734 333 29
Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
1-13/16’’ 1.81 46.0 18.27 464 5.12 130 21.85 555 14.02 356 194 88 12
2-1/16’’ 2.06 52.4 20.51 521 5.71 145 21.65 550 18.50 470 243 110 12
2-9/16’’ 2.56 65.1 22.24 565 6.69 170 22.44 570 18.50 470 298 135 15
3-1/16’’ 3.06 77.8 24.37 619 8.19 208 24.41 620 24.02 610 474 215 18
4-1/16’’ 4.06 103.2 26.38 670 9.84 250 26.38 670 24.00 610 805 365 24
5-1/8’’ 5.13 130.2 29.02 737 13.19 335 29.13 740 24.02 610 1323 600 29
6-3/8’’ 6.37 161.9 35.00 889 14.76 375 45.87 1165 35.00 889 2502 1135 43

15,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
1-13/16’’ 1.81 46.1 17.99 457 5.63 143 27.20 691 18.50 470 298 135 12

2-1/16’’ 2.06 52.4 19.02 483 6.69 170 21.54 547 18.50 470 287 130 12

2-9/16’’ 2.56 65.1 20.98 533 7.68 195 23.48 597 18.50 470 529 240 15

3-1/16’’ 3.06 77.8 23.54 598 9.45 240 24.61 625 23.03 585 871 395 19

4-1/16’’ 4.06 103.2 29.02 737 11.69 297 35.79 909 24.02 610 1554 705 29

16 17
 Fracturing Gate Valve GBFL GBFL Fracturing Gate Valve

Description

The GBFL Gate Valve was designed for use as a manual valve in high pressure,large bore applications. Dimensions for flanged end GBFL

This valve incorporates a lower balancing stem and unique ball screw mechanism for ease of operation in A:Flange face to face
B:Bore centerline to bottom of valve
the field. It is value-engineered for reliability, low torque,ease of operation and servic and has many of the
C:Bore centerline to handwheel top
D:Handwheel diameter
same features as the GBS gate valve,including the gate and seat design.

10,000 psi Working Pressure

Size Bore A B C D Weight

in mm in mm in mm in mm in mm lb kg
5-1/8’’ 5.13 130.2 29.02 737 26.97 685 42.72 1085 23.62 600 2006 910
6-3/8’’ 6.38 162 35 889 30 762 51.38 1305 34 863.6 2502 1135
7-1/16’’ 7.06 179.4 35 889 27.95 710 65.16 1655 34 863 3748 1700
6

15,000 psi Working Pressure

Features
Size Bore A B C D Weight

Bi-directional and through conduit design provides low flow residence and increased service life. in mm in mm in mm in mm in mm lb kg
4-1/16’’ 4.06 103.2 29.02 737 25.24 641 43.31 1100 23.62 600 1687 765
A ball screw mechanism and balance stem are incorporated into the GBFL gate valve to minimize the actuating torque.
5-1/8’’ 5.13 130.2 35 889 27.99 711 45.08 1145 36 914.4 2601 1180

Sealing at the gate-to-seat and the seat-to-body is metal-to-metal. 6-3/8’’ 6.38 162 41 1041 34.09 866 64.57 1640 40 1016 6779 3075
7-1/16’’ 7.06 179.4 40.98 1041 36.73 933 58.07 1475 34 863.6 5787 2625
One-piece seats and a slab gate ensure dependable sealing and simplify field service. The gate and seat assembly seals

in both directions, and the gate and seats can be reversed for increased life.

In addition to the metal-to-metal seal between the seat and valve body, non-elastomeric seal rings provide protection against

intrusion of particle contaminates into the valve cavity, improve gate and seat service life, prevent damage to the body-to-seat

seal face, and improve valve performance at very low pressure.

The stem packing can withstand severe temperatures and fluids of fracturing conditions. It’s economical and convenient to maintain.

The balance stem may be used to indicate the gate position.

The seal between the valve body and bonnet is a pressure-energized, BX-style metal bonnet gasket.

18 19
 Ball Screw Gate Valve GBSR GBSR Ball Screw Gate Valve

Description

The GBS-R Gate Valve was designed as a manual valve for use in high pressure, large bore applications. Dimensions for flanged end GBSR

This valve incorporates a lower balancing stem and unique ball screw mechanism for ease of operation in A:Flange face to face
B:Bore centerline to bottom of valve
the field. It is value-engineered for reliability, low torque, ease of operation and service with many of the
C:Bore centerline to handwheel top
D:Handwheel diameter
same features as the GBS Gate Valve, including the gate and seat design.

Features
Bearing cap grease fitting allows positive
5,000 psi Working Pressure
bearing lubrication.
Size Bore A B C D Weight Full open /close
Positive metal-to-metal sealing (gate-to-seat
in mm in mm in mm in mm in mm lb kg Turn Count
and seat-to-body). 9’’ 9.00 228.6 41.00 1041 33.70 856 59.06 1500 24.02 610 4552 2065 39

The lower stem balances the pressure thrust on

the upper stem to reduce operating torque,

10,000 psi Working Pressure
prevents body cavity pressure build-up during
Size Bore A B C D Weight Full open /close
operation and provides position indication.
in mm in mm in mm in mm in mm lb kg Turn Count
The upper stem and lower stem can be back 4-1/16’’ 4.06 103.2 26.38 670 24.09 612 40.75 1035 23.62 600 1235 560 20
5-1/8’’ 5.13 130.2 29.02 737 26.97 685 42.72 1085 23.62 600 2006 910 23
seated to allow either stem packing to be
6-3/8’’ 6.38 162.0 35.00 889 30.00 762 51.38 1305 34.00 864 2502 1135 30
replaced, under pressure if necessary. (For Pressure-energized metal-to-metal bonnet seal. 7-1/16’’ 7.06 179.4 35.00 889 27.95 710 65.16 1655 34.00 864 3748 1700 32

safety purposes, it’s suggested to replace The GBS-R Gate Valve has grease fittings located

packing after releasing pressure). on the downstream side of the upper stem and
15,000 psi Working Pressure
In addition to the metal-to-metal seal between lower stem back seat shoulders for lubricating
Size Bore A B C D Weight Full open /close
the seats and valve body, two spring loaded, stem and the valve cavity.
in mm in mm in mm in mm in mm lb kg Turn Count
non-elastomeric lip-seals provide maximum Bi-directional design provides flow direction 4-1/16’’ 4.06 103.2 29.02 737 25.24 641 43.31 1100 23.62 600 1687 765 20

protection against intrusion of particle 5-1/8’’ 5.13 130.2 35.00 889 27.99 711 45.08 1145 36.00 914 2601 1180 15
versatility and increased service life.
6-3/8’’ 6.38 162.0 41.00 1041 34.09 866 61.57 1640 40.00 1016 6779 3075 30
contaminates into the valve cavity, improve The stem packing is a pressure energized seal and 7-1/16’’ 7.06 179.4 40.98 1041 36.73 933 58.07 1475 34.00 864 5787 2625 34
gate and seat service life, prevent damage to can withstand severe temperatures and fluids. It is

the body-to-seat seal face, and improve valve constructed of a non-elastomeric material that

performance at very low pressure.

20,000 psi Working Pressure
offers a low coefficient of friction.
Size Bore A B C D Weight Full open /close

Approved Certification in mm in mm in mm in mm in mm lb kg Turn Count

3-1/16’’ 3.06 77.8 30.51 775 19.49 495 35.24 895 23.62 600 1885 855 15

CE/PED For API 6A Product, Issued by DNV

20 21
 Frac Service Gate Valve GBW GBW Frac Service Gate Valve

Scope
Working Size
Pressure 1-13/16’’ 2-1/16’’ 2-9/16’’ 3-1/16’’ 4-1/16’’ 5-1/8’’ 7-1/16’’

3000 psi

5000 psi

10000 psi

15000 psi

20000 psi

Features

The outer seats and inner seats are both embedded into the body. Under the pressure, the inner seats

and outer seats move freely, creating an effective upstream sealing.

The inner seats have a sand control plate design on the bottom, and the set of shielded ring between

outer seats and inner seats prevents the sand getting into the body cavity effectively.

The surface of the sand control board and the inner seat sealing surface are aligned. When the gate

move downward, the gate is always contact with the inner seat and sand control plate in order to prevent

sand getting into body

Approved Certification

CE/PED For API 6A Product, Issued by DNV

22 23
 Hydraulic Valve AH AH Hydraulic Valve

Scope
Working Size
Pressure 1-13/16’’ 2-1/16’’ 2-9/16’’ 3-1/16’’ 4-1/16’’ 5-1/8’’ 7-1/16’’ 9’’
3000 psi

5000 psi

10000 psi

15000 psi

20000 psi

Actuator Accessories

Mechanical Hold Open Device Assembly (Non Fusible)

Features Mechanical Hold Open Device Assembly (Fusible)

Fusible Lock Out Cap

Valve body pressure assist in closing valve.
Limit Switch & Position Indicator
Back seat port for testing of metal to metal seating.
Transparent Stem Protector
Quick disconnect.
Hydraulic Override
Vent weep port above bonnet packing to detect stem packing integrity.

Top shaft seals easily repaired in-line by removing upper piston assembly.

Manufactured to Nace MR-0175 for effective operation under harsh environments. Standard Hydraulic AH Actuator
Model AH
Non traveling seal design increases piston seals longevity .
Piston Size AH 3.5 / AH 4.5 / AH 6.5 / AH 9.5
Piston cylinder and piston are electrolysis nickel plated for corrosion resistance.
API Material Class AA
Hydraulic control port can be rotated 360 degrees for easy alignment. Maximum Operating Pressure 3,000# PSI (207 Bars)
Relief Device Setting 3 , 000 # PSI (207 Bars) @ +72°F (+ 22°C)
Metal-to-metal seal between bonnet and stem is designed to be secondary seal should high temperatures
Housing Test Pressure 4 ,5 00 # PSI (310 Bars)
melt or distort bonnet stem packing. API 6A Monogramable API 6A / ISO 10423
No small ports to plug up or freeze. Operating Temperature - 20°F to +250°F (-28°C to +121°C)
Product Specification Level PSL 1, 2, 3, 3G, 4
Spring assist in closing with no valve body pressure.
Performance Requirements PR - 1 & PR-2
Actuator top shaft serves as a visual for position of gate.

Can be installed as secondary master valve, wing valve, headers, gathering lines, pipelines or ESD valve.
Pressure Ratings API 6A 2,000# PSI thru 20,000# PSI
External Pressure Relief Device (PSE) to protect from over-pressure. Sizes API 6A 1-13/16" thru 9"
Non Nace / Non Sour Service
Approved Certification AA BB CC
Material Class Sour Service Nace MR0175 Trim
PR2 Product Test , Issued by DNV
DD-0.5 DD-1.5 DD-NL EE-0.5 EE-1.5 EE-NL
CE/PED For API 6A Product, Issued by DNV FF-0.5 FF-1.5 FF-NL HH-0.5 HH-1.5 HH-NL
Product Specification Level PSL 1, 2, 3, 3G, 4
Temperature Rating -50°F to 250°F (-46°C to +121°C)

24 25
 Hydraulic Valve AC AC Hydraulic Valve

Scope
Working Size
Pressure 3-1/16’’ 4-1/16’’ 5-1/8’’

3000 psi

5000 psi

10000 psi

15000 psi

Standard Hydraulic AC Actuator(IPS)

Actuator Model AC
Piston Size 4.5" x 78 / 5.875" x 90 / 5.875" x 118 / 6.5" x 118 / 6.5" x 142
Actuator Material Class AA
Maximum Operating Pressure 3,000# PSI (207 Bars)
Relief Device Setting 3,000# PSI (207 Bars)
Housing Test Pressure 4,500# PSI (310 Bars)
API 6A Monogramable API 6A / ISO 10423
Operating Temperature - 20°F to +250°F (-29°C to +121°C)
Product Specification Level PSL 1, 2
Performance Requirements PR - 1 & PR-2
Features
Liberal use of wear rings in actuator assuring long life. Valve Model GBS/GBC/GBW
Valve Pressure Ratings API 6A 2,000# PSI thru 15,000# PSI
Actuator has single forged top cap and cylinder for simple in-line maintenance.
Valve Normal Sizes API 6A 1-13/16" thru 5-1/8"
Quick disconnect mechanism allows for fast removal without disturbing the body / bonnet connection and Non Nace / Non Sour Service

provides immediate access to stem packing. AA BB CC

Sour Service Nace MR0175 Trim
Provides immediate access to stem packing. Valve Material Class
DD-0.5 DD-1.5 DD360 DD-NL EE-0.5 EE-1.5
Anti-explosive decompression seals and energized non-elastomeric lip seals are available. EE360 EE-NL FF-0.5 FF-1.5 FF360 FF-NL

Adjustable internal down-stop for gate alignment. HH-NL

Product Specification Level PSL 1, 2, 3, 3G, 4
A metal to metal seal between the bonnet and stem acts as a secondary seal if the stem packing is damaged.
Temperature Rating -50°F to 250°F (-46°C to +121°C)

Approved Certification

PR2 Product Test , Issued by DNV

CE/PED For API 6A Product, Issued by DNV

26 27
 Hydraulic Valve DH DH Hydraulic Valve

Scope
Working Size
Pressure 1-13/16’’ 2-1/16’’ 2-9/16’’ 3-1/16’’ 4-1/16’’ 5-1/8’’ 7-1/16’’ 9’’
3000 psi

5000 psi

10000 psi

15000 psi

20000 psi

Actuator Accessories

Mechanical Hand Open Device Assembly (Non Fusible)

Fusible Lock Out Cap

Standard DH Actuator Specification

Model DH
Piston Size DH 4.5 / DH 6.5 / DH 9.5
API Material Class AA
Maximum Operating Pressure 3,000# PSI ( 207 Bars )
Relief Device Setting 3 , 000 # PSI (207 Bars) @ +72°F (+ 22°C)
Housing Test Pressure 6 , 000 # PSI (414 Bars)
API 6A Monogramable API 6A / ISO 10423
Operating Temperature - 20°F to +250°F (-29°C to +121°C)
Product Specification Level PSL 1, 2, 3, 3G, 4
Performance Requirements PR - 1 & PR-2

Features
Pressure Ratings API 6A 2,000# PSI thru 20,000# PSI
Back seat test port and packing detection port.
Sizes API 6A 1-13/16" thru 9"
Rising stem provides indication of gate valve position. Non Nace / Non Sour Service Trim
Cylinder and piston are electrolysis nickel plated for corrosion resistance. AA BB CC
Material Class Sour Service Nace MR0175 Trim
External Pressure Relief Device (PSE) to protect from over-pressure.
DD-0.5 DD-1.5 DD-NL EE-0.5 EE-1.5 EE-NL
FF-0.5 FF-1.5 FF-NL HH-0.5 HH-1.5 HH-NL
Approved Certification Product Specification Level PSL 1, 2, 3, 3G, 4
Temperature Rating -50°F to 250°F (-46°C to +121°C)

CE/PED For API 6A Product, Issued by DNV

28 29
 Pneumatic Valve AP AP Pneumatic Valve

Scope
Working Size
Pressure 1-13/16’’ 2-1/16’’ 2-9/16’’ 3-1/16’’ 4-1/16’’ 5-1/8’’ 7-1/16’’
3000 psi

5000 psi

10000 psi

15000 psi

20000 psi

Actuator Accessories

Mechanical Hold Open Device Assembly (Non Fusible)

Features Mechanical Hold Open Device Assembly (Fusible)

Fusible Lock Out Cap

Valve is designed to close upon loss of control pressure.
Limit Switch & Position Indicator
A metal to metal seal between the bonnet and stem acts as a secondary seal if the stem packing is damaged.
Transparent Stem Protector
Back seat port for gas testing of metal to metal seating.
Hydraulic Override
Vent weep port above the bonnet packing to detect stem packing integrity.

An internal Pressure Relief Valve (PSE) helps provide tamper proof protection against overpressure. The

internal PSE is set to relieve at a higher setting than the external PSE. Standard Piston Pneumatic AP Actuator
Model AP
Actuator top shaft serves as a visual for position of gate.
Piston Size AP -13" , AP - 15" , AP - 18" , AP - 20"
Piston Housing is coated internally and externally with low friction coating, high corrosion resistance API Material Class AA

to oxidation and high temperatures. All other internal components are either stainless steel or coated to Maximum Operating Pressure 170# PSI (12 Bars)
Relief Device Setting 170# PSI (12 Bars) @ +72°F ( +22°C)
prevent corrosion from contamination.
Housing Test Pressure 225# PSI (18 Bars)
The AP Safety Valve is designed to be repaired and maintained in the field. Internal parts can be removed API 6A Monogramable API 6A / ISO 10423
Operating Temperature - 20°F to +250°F (-29°C to +121°C)
and changed without removing the valve assembly from the line.
Product Specification Level PSL 1, 2, 3, 3G, 4
Top shaft seals easily repaired in line without removing piston housing. Performance Requirements PR - 1 & PR-2
Spring assist in closing with no valve body pressure.

Internal adjustable down stop.

Pressure Ratings API 6A 2,000# PSI thru 20,000# PSI
Quick disconnect. Sizes API 6A 1-13/16" thru 7-1/16"
Non Nace / Non Sour Service Trim
Manufactured to Nace MR-0175 for effective operation under harsh environments.
AA BB CC
Material Class Sour Service Nace MR0175 Trim
Approved Certification
DD-0.5 DD-1.5 DD-NL EE-0.5 EE-1.5 EE-NL
FF-0.5 FF-1.5 FF-NL HH-0.5 HH-1.5 HH-NL
CE/PED For API 6A Product, Issued by DNV
Product Specification Level PSL 1, 2, 3, 3G, 4
Temperature Rating -50°F to 250°F (-46°C to +121°C)

30 31
 Pneumatic Valve AD AD Pneumatic Valve

Scope
Working Size
Pressure 1-13/16’’ 2-1/16’’ 2-9/16’’ 3-1/16’’ 4-1/16’’ 5-1/8’’ 7-1/16’’
3000 psi

5000 psi

10000 psi

15000 psi

Actuator Accessories

Mechanical Hold Open Device Assembly (Non Fusible)

Features Mechanical Hold Open Device Assembly (Fusible)

Fusible Lock Out Cap

Rolling diaphragm design leads to longer seal life and reduces problems associated with moving O-Ring seals.
Limit Switch & Position Indicator
Non stainless steel components are Xylan coated for longer wear life and maximum corrosion resistance.
Transparent Stem Protector
Manufactured to Nace MR-0175 for effective operation under harsh environments.
Hydraulic Override
Internal adjustable down stop.

Spring assist in closing with no valve body pressure.

Top shaft seals easily repaired in line without removing upper diaphragm case. Standard Diaphragm Pneumatic AD Actuator
Model AD
External Pressure Relief Valve (PSE) for over pressure protection.
Piston Size AD - 10" , AD - 12" , AD - 15" , AD - 18" , AD - 20"
Actuator top shaft serves as a visual for position of gate. API Material Class AA

Vent weep port above the bonnet packing to detect stem packing integrity. Maximum Operating Pressure 170 # PSI (12 Bars)
Relief Device Setting 170 # PSI (12 Bars) @ +72°F ( +22°C)
The AD Safety Valve are designed to be repaired and maintained in the field.
Housing Test Pressure 225 # PSI (18 Bars)
Back seat port for testing of metal to metal seating. API 6A Monogramable API 6A / ISO 10423
Operating Temperature - 20°F to +250°F (-29°C to +121°C)
Valve is designed to close upon loss of control pressure.
Product Specification Level PSL 1, 2, 3, 3G, 4
Operates with low pressure air, gas, and nitrogen. Performance Requirements PR - 1 & PR-2
Quick disconnect.

A metal to metal seal between the bonnet and stem acts as a secondary seal if the stem packing is damaged.
Pressure Ratings API 6A 2,000# PSI thru 20,000# PSI
Sizes API 6A 1-13/16" thru 7-1/16”
Non Nace / Non Sour Service Trim
Approved Certification AA BB CC
Material Class Sour Service Nace MR0175 Trim
CE/PED For API 6A Product, Issued by DNV
DD-0.5 DD-1.5 DD-NL EE-0.5 EE-1.5 EE-NL
FF-0.5 FF-1.5 FF-NL HH-0.5 HH-1.5 HH-NL
Product Specification Level PSL 1, 2, 3, 3G, 4
Temperature Rating -50°F to 250°F (-46°C to +121°C)

32 33
 Plug & Cage Control Choke CAP CAP Plug & Cage Control Choke
Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke. Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke.

Description

The Plug and Cage Choke has a plug that throttles the flow on the inside diameter of the ported cage. This Dimensions for CAP

choke is used for high capacity/medium pressure drop applications. Because of its high capacity, the Plug D:Handwheel diameter
X:Bore centerline to inlet flange face
and Cage Choke is useful for flow optimization near the end of well life.
Y:Bore centerline to outlet flange face
H:Overall size

3,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
3-1/8’’ 3.13 79.4 15.75 400 10.39 264 11.22 285 34.84 885 386 175

5,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 15.75 400 8.74 222 10.87 276 27.95 710 309 140
2-9/16’’ 2.56 65.1 15.75 400 10.51 267 12.52 318 30.71 780 342 155
3-1/8’’ 3.13 79.4 15.75 400 10.39 264 11.61 295 35.43 900 392 178
4-1/16’’ 4.06 103.2 15.75 400 11.89 302 15.98 406 39.37 1000 476 216
5-1/8’’ 5.13 130.2 24.02 610 14.25 362 19.37 492 40.16 1020 849 385

Features
10,000 psi Working Pressure
Tungsten carbide flow plug assembly in conjunction with cage sleeve provides optimum wear resistance in
Size Bore D X Y H Weight
erosive conditions.
in mm in mm in mm in mm in mm lb kg
Metal-to-metal bonnet closure seal. 2-1/16’’ 2.06 52.4 15.75 400 8.74 222 10.87 276 27.95 710 320 145
2-9/16’’ 2.56 65.1 15.75 400 10.51 267 12.52 318 30.71 780 364 165
Fully guided plug minimizes side loading and vibration.
4-1/16’’ 4.06 103.2 15.75 400 10.00 254 11.54 293 33.98 863 560 254
Self-flushing, pressure-balanced ports minimize stem loads and actuator requirements. Heavy duty thrust

bearings also reduce operating torque.

Outer flow cage provides protection from impact damage. 15,000 psi Working Pressure
Stem lock maintains set position. Size Bore D X Y H Weight

Indicator calibrated in 1/64" or multiples of 1/64" increments to show effective orifice diameter. in mm in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 15.75 400 8.74 222 10.87 276 27.95 710 331 150
Approved Certification 3-1/16’’ 3.06 77.8 15.75 400 11.46 291 12.52 318 34.84 885 763 346

CE/PED For API 6A Product, Issued by DNV

34 35
 External Sleeve Control Choke CAE CAE External Sleeve Control Choke
Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke. Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke.

Description

The External Sleeve Control Choke has a sleeve that throttles the flow on the outside diameter of the Dimensions for CAE

ported cage. This choke is used for low capacity/high pressure drop applications. The external sleeve is D:Handwheel diameter
X:Bore centerline to inlet flange face
specifically designed for severely erosive conditions where the combination of high pressure drops and
Y:Bore centerline to outlet flange face
H:Overall size
high sand concentrations can reduce the life of a choke.

10,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 15.75 400 11.81 300 12.13 308 33.86 860 304 138

15,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
3-1/16’’ 3.06 77.8 15.75 400 13.46 342 17.76 451 39.25 997 1019 462

20,000 psi Working Pressure

Size Bore D X Y H Weight
Features in mm in mm in mm in mm in mm lb kg
3-1/16’’ 3.06 77.8 15.75 400 14.96 380 15.51 394 38.43 976 970 440
Tungsten carbide lined stem and seat provide optimum wear resistance in erosive conditions.

Metal-to-metal bonnet closure seal.

Reverse angle trim reduces annular flow-by extending the life of the trim.

Self-flushing, pressure-balanced ports minimize stem loads and actuator requirements. Heavy duty thrust

bearings also reduce operating torque.

Outer Flow Sleeve provides protection from impact damage.

Stem lock maintains set position.

Indicator calibrated in 1/64" or multiples of 1/64" increments to show effective orifice diameter.

Approved Certification
CE/PED For API 6A Product, Issued by DNV

36 37
 Adjustable Needle Choke CAN CAN Adjustable Needle Choke
Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke. Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke.

Description

The adjustable needle choke has a standard body with an adjustable bonnet assembly and seat installed. Dimensions for CAN

This assembly features a tungsten carbide-tipped needle, tungsten carbide-lined seat, and an indicator D:Handwheel diameter
X:Bore centerline to inlet flange face
calibrated in 1/64" or multiple of 1/64" to show effective orifice diameter. A needle lock device retains
Y:Bore centerline to outlet flange face
H:Overall size
needle position.

3,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 12.99 330 8.74 222 10.87 276 24.88 632 172 78
2-9/16 2.56 65.1 12.99 330 10.5 267 12.5 317.5 27.83 707 220.5 100
3-1/8’’ 3.13 79.4 12.99 330 10.39 264 11.61 295 27.56 700 249 113
4-1/16’’ 4.06 103.2 15.75 400 11.89 302 15.98 406 33.98 863 401 182
7-1/16’’ 7.13 181.0 7.09 180 14.25 362 19.37 492 38.27 972 791 359

5,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 12.99 330 8.74 222 10.87 276 25.43 646 187 85
2-9/16’’ 2.56 65.1 12.99 330 10.51 267 12.01 305 28.74 730 220 100
3-1/8’’ 3.13 79.4 15.75 400 10.39 264 11.61 295 31.65 804 287 130
4-1/16’’ 4.06 103.2 15.75 400 11.89 302 15.98 406 34.72 882 452 205
5-1/8’’ 5.13 130.2 18.90 480 14.25 362 19.37 492 38.27 972 833 378
Features 7-1/16’’ 7.06 179.4 18.90 480 14.25 362 19.37 492 38.27 972 833 378

Bleed valve allows the operator to safety vent the body cavity pressure prior to removal of the bonnet assembly.

Body pressure is automatically vented when the operator unscrews the bonnet nut one turn.
10,000 psi Working Pressure
ACME threads can be cleaned and inspected easily on both the bonnet assembly and body.
Size Bore D X Y H Weight
CAN type choke prevents bonnet seal extrusion by means of body-to-bonnet contact behind the O-ring seal.
in mm in mm in mm in mm in mm lb kg
The bean/seat has been recessed in the body below the inlet flow path for longer life. 2-1/16’’ 2.06 52.4 12.99 330 7.68 195 8.74 222 23.62 600 163 74
2-9/16’’ 2.56 65.1 15.75 400 10.51 267 12.52 318 25.59 650 243 110
3-1/16’’ 3.06 77.8 8.66 220 10.39 264 11.61 295 28.46 723 370 168
Approved Certification
4-1/16’’ 4.06 103.2 19.69 500 11.89 302 15.98 406 29.53 750 430 195

PR2 Product Test , Issued by DNV

CE/PED For API 6A Product, Issued by DNV

38 39
 Multiple Orifice Choke CM CM Multiple Orifice Choke
Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke. Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke.

Description

The Multiple Orifice Chokes utilize a set of adjacent discs, each containing a pair of circular opening Dimensions for CM

orifices. The two discs are diamond lapped on the mating surfaces to tolerances near two ligh bands of D:Handwheel diameter
X:Bore centerline to inlet flange face
flatness. This allows for extremely precise shutoff and flow regulation.
Y:Bore centerline to outlet flange face
H:Overall size

5,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
4-1/16’’ 4.06 103.2 23.62 600 11.93 303 16.89 429 44.49 1130 794 360

15,000 psi Working Pressure

Size Bore D X Y H Weight
in mm in mm in mm in mm in mm lb kg
3-1/16’’ 3.06 77.8 12.80 325 12.80 325 37.20 945 37.20 945 1080 490
4-1/16’’ 4.06 103.2 23.62 600 13.50 343 19.69 500 48.43 1230 794 360

Features
Pressure holds discs together, avoid vibration, noise or fatigue failures.

The circular shape of disc offers a smaller wearing surface, less wear on the throttling and greatly extended

service life.

Very little downtime for maintenance.

Tungsten carbide discs are offered for extreme erosive conditions and very high pressure drops.

The outlet end of a Multiple Orifice Choke has a replaceable adapter flange, the customer can changes it in

accordance with different pressure ratings and sizes.

Approved Certification
CE/PED For API 6A Product, Issued by DNV

40 41
 Positive Choke CP CP Positive Choke
Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke. Neway choke products include plug and cage choke, external sleeve choke, adjustable needle choke, positive choke and multiple orifice choke.

Description

Positive Choke provides a fixed flow condition with a large selection of available bean sizes and types. All Dimensions for CP

standard positive chokes under 15000psi wp are furnished with a blanking plug that has a 1/2" NPT port for X:Bore centerline to inlet flange face
Y:Bore centerline to outlet flange face
attaching a needle valve and/or pressure gauge. Positive chokes 15000psi wp and over are supplied with
H:Overall size
a 9/16" autoclave port.

3,000 psi Working Pressure

Size Bore X Y H Weight
in mm in mm in mm in mm lb kg
7-1/16’’ 7.06 179.4 14.25 362 19.37 492 29.17 741 505 229

5,000 psi Working Pressure

Size Bore X Y H Weight
in mm in mm in mm in mm lb kg
2-9/16’’ 2.56 65.1 10.55 268 12.52 318 20.87 530 198 90

3-1/8’’ 3.13 79.4 10.39 264 11.61 295 20.16 512 254 115

7-1/16’’ 7.06 179.4 14.25 362 19.37 492 29.17 741 604 274

Features
10,000 psi Working Pressure
Positive choke bodies are interchangeable with adjustable needle choke.

Bleed valve allows the operator to safely vent the body cavity pressure prior to removal of the bonnet assembly. Size Bore X Y H Weight
in mm in mm in mm in mm lb kg
Body pressure is automatically vented when the operator unscrews the bonnet nut one turn.
2-9/16’’ 2.56 65.1 10.51 267 12.52 318 20.87 530 220 100
ACME threads can be cleaned and inspected easily on both the bonnet assembly and body. 3-1/16’’ 3.13 77.8 9.06 230 11.02 280 22.05 560 282 128
4-1/16’’ 4.06 103.2 10.00 254 11.50 292 21.18 538 381 173
CAN type choke prevents bonnet seal extrusion by means of body-to-bonnet contact behind the O-ring seal.

The bean/seat has been recessed in the body below the inlet flow path for longer life.

Approved Certification

PR2 Product Test , Issued by DNV

CE/PED For API 6A Product, Issued by DNV

42 43
 Trunnion Mounted Ball Valve BS BS Trunnion Mounted Ball Valve

Description

NOE Trunnion Mounted soft sealing Ball Valve is supplied for two-piece or three-piece split body, all Dimensions for BS ball valve

design is based on standard API 6A&ISO 10423. Flow shut off can be achieved by rotating the ball 90 L:Flange face to face
D:Bore centerline to handwheel
degrees.
H:Valve overall size
H1:Bore centerline to bottom

3,000 psi Working Pressure

Size Bore L D H1 H W Weight
in mm in mm in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 17.72 450 6.30 160 4.65 118 15.75 400 7.99 203 198 90
3-1/8’’ 3.13 79.4 18.70 475 10.63 270 5.71 145 22.83 580 15.75 400 364 165
4-1/16’’ 4.06 103.2 22.76 578 16.54 420 6.97 177 27.95 710 19.69 500 584 265
7-1/16’’ 7.06 179.4 32.68 830 22.05 560 16.97 431 45.87 1165 23.62 600 2205 1000

5,000 psi Working Pressure

Size Bore L D H1 H W Weight
in mm in mm in mm in mm in mm in mm lb kg
Features
2-1/16’’ 2.06 52.4 17.64 448 9.06 230 5.71 145 20.67 525 15.75 400 220 100
3-1/8’’ 3.13 79.4 23.86 606 16.54 420 7.28 185 28.35 720 19.69 500 628 285
Two O-ring seals prevents leakage from stem area.
4-1/16’’ 4.06 103.2 26.38 670 18.11 460 7.87 200 34.06 865 23.62 600 838 380
Emergency Sealant Injection Fitting: Allow external interventions to prevent stem leakage. 7-1/16’’ 7.06 179.4 37.40 950 22.05 560 16.97 431 49.80 1265 27.56 700 2756 1250
9’’ 9.00 228.6 47.64 1210 25.59 650 20.12 511 57.68 1465 29.92 760 5203 2360
Blow-out Proof Stem(internally inserted): Safety feature that functions to assure stem sealing at all pressures.

Emergency Sealant Injection Fitting: Allows for external intervention to prevent seat leakage.

Back-up Metal to Metal Sealing: When primary soft-seat material is deteriorated by fire, the metal-to-metal

provides shutoff.

O-ring & Gasket Combination: Prevents leakage from body joint area.

Floating Spring-loaded Seats: Ensure sealing even at low pressures.

Anti-Static Device: Anti-static device ensures electric continuity preventing damage from static build-up.

Approved Certification
CE/PED For API 6A Product, Issued by DNV

44 45
 Trunnion Mounted Ball Valve BT BT Trunnion Mounted Ball Valve

Description

NOE Trunnion Mounted soft sealing Ball Valve is supplied for two-piece or three-piece split body, all Dimensions for BT ball valve

design is based on standard API 6A&ISO 10423. Flow shut off can be achieved by rotating the ball 90 L:Flange face to face
D:Bore centerline to handwheel
degrees.
H:Valve overall size
H1:Bore centerline to bottom

2,000 psi Working Pressure

Size Bore L D H1 H W Weight
in mm in mm in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 11.61 295 6.30 160 4.72 120 15.75 400 7.99 203 132 60
3-1/8’’ 3.13 79.4 14.13 359 10.63 270 5.71 145 22.64 575 15.75 400 254 115
4-1/16’’ 4.06 103.2 17.13 435 16.54 420 6.97 177 27.95 710 19.69 500 507 230
7-1/16’’ 7.06 179.4 27.95 710 22.05 560 13.19 335 42.13 1070 23.62 600 2006 910

3,000 psi Working Pressure

Size Bore L D H1 H W Weight
in mm in mm in mm in mm in mm in mm lb kg
Features
2-1/16’’ 2.06 52.4 14.61 371 6.30 160 4.72 120 15.75 400 7.99 203 176 80
3-1/8’’ 3.13 79.4 15.12 384 10.63 270 5.71 145 22.64 575 15.75 400 287 130
Two O-ring seals prevents leakage from stem area.
4-1/16’’ 4.06 103.2 18.11 460 16.54 420 6.97 177 27.95 710 19.69 500 551 250
Emergency Sealant Injection Fitting: Allow external interventions to prevent stem leakage. 7-1/16’’ 7.06 179.4 30.39 772 22.05 560 13.19 335 42.13 1070 23.62 600 2116 960

Blow-out Proof Stem(internally inserted): Safety feature that functions to assure stem sealing at all pressures.

Emergency Sealant Injection Fitting: Allows for external intervention to prevent seat leakage.

Back-up Metal to Metal Sealing: When primary soft-seat material is deteriorated by fire, the metal-to-metal 5,000 psi Working Pressure
provides shutoff.
Size
Size Bore
Bore LL DD H1
H1 H
H WW Weight
Weight
O-ring & Gasket Combination: Prevents leakage from body joint area. in mm in mm in mm in mm in mm in mm lb kg
Floating Spring-loaded Seats: Ensure sealing even at low pressures. 2-1/16’’ 2.06 52.4 14.61 371 9.06 230 5.31 135 18.90 480 11.81 300 209 95
3-1/8’’ 3.13 79.4 18.62 473 16.54 420 7.28 185 28.35 720 19.69 500 595 270
4-1/16’’ 4.06 103.2 21.61 549 18.11 460 7.87 200 34.06 865 23.62 600 661 300
7-1/16’’ 7.06 179.4 34.25 870 22.05 560 14.17 360 47.24 1200 27.56 700 2557 1160

Approved Certification
CE/PED For API 6A Product, Issued by DNV

46 47
 Metallic Sealing Ball Valve BTM BTM Metallic Sealing Ball Valve

Description
Dimensions for BM ball valve
Metallic sealing ball valve is designed to suit severe conditions, such as high temperature, high pressure,
L1:Bore centerline to bonnet
strong corrosive fluid and the medium with solid phase particles. It is value-engineered for reliability, low L:Face to face
H1:Bore centerline to bottom
pressure loss, ease of operation and has long service time.
H2:Bore centerline to body top
H:Valve overall size

5,000 psi Working Pressure

Size Bore L L1 H H1 H2 Weight
in mm in mm in mm in mm in mm in mm lb kg
3-1/8’’ 3.13 79.4 18.62 473 8.03 204 29.02 737 7.99 203 8.35 212 613 278

10,000 psi Working Pressure

Size Bore L L1 H H1 H2 Weight
in mm in mm in mm in mm in mm in mm lb kg
1-13/16’’ 1.81 46.0 21.46 545 8.39 213 37.40 950 8.46 215 10.16 258 661 300
2-1/16’’ 2.06 52.4 20.51 521 9.17 233 26.69 678 7.48 190 9.37 238 529 240
3-1/16’’ 3.13 79.4 18.62 473 8.03 204 29.02 737 7.99 203 8.35 212 613 278

Features
Low leakage graphite packing.

Surface harding treatment between ball and seat, it meets the requirement of high temperature abrasive wear

and high impact resistance.

Floating Spring-loaded Seats: Ensure sealing even at low pressures.

Blow-out Proof Stem(internally inserted): Safety feature that functions to ensure stem sealing at all pressures.

The top flange is designed according to ISO 5211, it is available for installation with either gear box or power

drive mechanism.

Approved Certification
CE/PED For API 6A Product, Issued by DNV

API 607/6FA Fire Safe Test, Issued by LR

48 49
 Top Entry Ball Valve BEM BEM Top Entry Ball Valve

Description
Dimensions for BEM ball valve
The BEM ball valve can be removed easily and quickly on the pipe line. There is no need to remove the
L:Face to face size
valve from the line when the valve has a failure on the line, and only remove the flange bolts and nuts, H1:Bore centerline to bottom size
H2:Body top to bottom size
remove the bonnet and stem assembly from the valve body and then remove the ball and seat assembly,
H: Gear Box top to bottom size
you can repair the valve on the line. So that we can saves time and reduces losses.

10,000 psi Working Pressure

Size Bore L H1 H2 H Weight
in mm in mm in mm in mm in mm lb kg
1-13/16’’ 1.81 46 18.27 464 22.20 564 4.72 120 16.34 415 572 260
2-1/16’’ 2.06 52.4 20.51 521 23.43 595 4.72 120 17.13 435 605 275

Features
The ball valve consists of body, ball, seat, stem, bonnet, gearbox and so on.

Adopt up install structure, more less leakage, little pipeline stress, easy to manufacture,

it can achieve online maintenance.

This valve body is forging, which is convenient to process support in the body bottom, simple structure,

small processing difficulty, accurate positioning, no leakage point, and cost saving.

Use o-rings or fire prevention sealing materials between seat and body, that can ensure the sealing effect.

Seat and ball low pressure seal adopt two opposite disc springs , that can reduce processing cost and

difficulty, easy to install.

Between the valve body and the bonnet, BX ring was used, that can ensure the seal performance. Two seals

are designed for stem packing: Lipseal and Graphite packing.

Add a relief valve to the valve body. When replacing the stem packing, the pressure of the middle cavity is all

released to ensure the safety of the operator.

Simple installation and disassembly tools can be used for online maintenance.

50 51
 Mud Valve GA75 GA75 Mud Valve

Description
Dimensions for flanged end GA75
The GA75 Series Mud Valve is designed to meet the 7,500 psi working pressure demands of deep well
A:Flange face to face
drilling. It is chosen for the following drilling applications: standpipe manifolds, pump manifolds, pump B:Bore centerline to bottom of valve
C:Bore centerline to handwheel top
manifold block valves, high pressure drilling system block valves and high pressure frac service. This
D:Bore centerline to handwheel
Valve is available in sizes 2-1/16" to 5-1/8" with butt weld end or flanged end connections.

7,500 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 20.51 521 4.02 102 17.36 441 9.96 253 265 120 13
2-9/16’’ 2.56 65.1 22.24 565 4.72 120 20.08 510 11.02 280 417 189 14
3-1/16’’ 3.06 77.8 24.38 619 5.39 137 22.36 568 11.02 280 562 255 16
4-1/16’’ 4.06 103.2 26.38 670 6.22 158 24.80 630 9.53 242 739 335 22
5-1/8’’ 5.13 130.2 29.00 737 7.17 182 33.94 862 10.00 254 1404 637 31

Features
Unique abrasion-resistant one piece seat and metal wear rings ensure positive seal performance for

extended service.

Replaceable one piece seat and metal wear rings eliminate costly valve removal.

In Line Field Repairability, bonnet is easily removed for internal parts inspection and/or replacement

without removing the valve from the line.

Include a sight lens to view the stem for determining gate position.

Locking seat design ensures alignment and minimum resistance to flow.

Flow-cleansed body cavity eliminates sanding problems.

Floating slab gate design.

Approved Certification

CE/PED For API 6A Product, Issued by DNV

ABS For API 6A Product, Issued by ABS

52 53
 Mud Valve GA75 GA Mud Valve

Description
Dimensions for welded end GA75
The GA series mud valve specifically engineered for the rigorous requirements of oilfield applications. It is
A:Weld face to face
B:Bore centerline to bottom of valve designed for dependable, heavy duty performance in abrasive service conditions. It is available in
C:Bore centerline to handwheel top
pressure ratings from 2000 to 5000psi and bore sizes from 2-1/16" to 4-1/16".
D:Bore centerline to handwheel

7,500 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.00 50.8 9.00 229 4.02 102 13.03 331 9.96 253 260 118 13
3-1/16’’ 3.00 76.2 13.00 330 5.39 137 22.36 568 11.02 280 430 195 16
4-1/16’’ 4.00 101.6 16.00 406 6.22 158 24.80 630 9.53 242 529 240 22
5-1/8’’ 5.00 127.0 17.88 454 7.17 182 33.94 862 10.00 254 1102 500 31

10,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
3-1/16’’ 3.06 77.8 13.00 330 4.29 109 23.07 586 11.02 280 419 190 16
4-1/16’’ 4.06 103.2 16.00 406 4.88 124 26.22 666 10.00 254 529 240 22
5-1/8’’ 5.13 130.2 18.66 474 6.69 170 34.65 880 13.39 340 1146 520 31
Features
The valve should be either fully open or fully closed while in service. Flow through a partially open valve may

erode the gate and seat.

In Line Field Repairability, the bonnet is easily removed for internal parts inspection and/or replacement without

removing the valve from the line.

Flexible trim offerings: Optional materials for stems, gates, seat inserts and seat elastomers make it easier to

trim valves for a wide range of service conditions.

The rising stem design protects the stem threads from lading.

Include a sight lens to view the stem for determining gate position.

The seat uses a unique design to ensures a tight seat seal against the body and around each valve port and has

proven to be effective even if the gate and seat ring become scored or abraded during service.

Approved Certification
CE/PED For API 6A Product, Issued by DNV

ABS For API 6A Product, Issued by ABS

54 55
 Mud Valve GA GA Mud Valve

Dimensions for flanged end GA Dimensions for threaded end GA

A:Flange face to face A:Thread face to face

B:Bore centerline to bottom of valve B:Bore centerline to bottom of valve
C:Bore centerline to handwheel top C:Bore centerline to handwheel top
D:Bore centerline to handwheel D:Bore centerline to handwheel

2,000 psi Working Pressure 2,000 psi Working Pressure

Size Bore A B C D Weight Size Bore A B C D Weight Full open /close
Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
in mm in mm in mm in mm in mm lb kg Turn Count
7-1/16’’ 5-1/8’’ 5.13 130.2 16.00 406 5.55 141 31.61 803 24.02 610 402 183 31
7.06 179.4 26.14 664 7.28 185 41.34 1050 12.80 325

3,000 psi Working Pressure

Size Bore A B C D Weight Full open /close 3,000 psi Working Pressure
in mm in mm in mm in mm in mm lb kg Turn Count
3-1/8’’ 3.13 79.4 17.13 435 4.92 125 17.72 450 19.02 483 298 135 20 Size Bore A B C D Weight Full open /close

4-1/16’’ 4.06 103.2 14.13 359 4.72 120 16.93 430 19.02 483 179 81 25 in mm in mm in mm in mm in mm lb kg Turn Count
4-1/16’’ 4.06 103.1 13.03 331 4.69 119 19.02 483 22.91 582 207 94 25
5-1/8’’ 5.13 130.2 15.98 406 5.55 141 31.61 803 24.02 610 403 183 31

5,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
4-1/16’’ 4.06 103.2 17.99 457 6.10 155 24.65 626 22.99 584 374 170 24 5,000 psi Working Pressure
7-1/16’’ 7.06 179.4 32.01 813 8.07 2.05 41.34 1050 15.75 400
Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.09 53.1 8.98 228 2.56 65 13.58 345 12.52 155 74 35 16
4-1/16’’ 4.06 104.0 13.00 330 4.59 116 24.61 625 11.50 292 254 115 24

56 57
 Mud Valve GA LC Regular Check Valve

Description
Dimensions for welded end GA
LC Series Check Valve is a unidirectional check valve which utilizes a spring loaded Poppet. The Poppet
A:Weld face to face
B:Bore centerline to bottom of valve is guided for consistent, reliable operation and seating. This Valve is designed for installation and use in
C:Bore centerline to handwheel top
high-pressure Mud Choke Manifolds, and high pressure Christmas Tree Injection and Kill Lines. It is
D:Bore centerline to handwheel
available in pressure ratings from 2000 to 20,000 psi and Bore sizes of 1-13/16" to 7-1/16".

3,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
4-1/16’’ 4.09 104.0 13.03 331 4.7 119 19.01 483 22.91 582 207 94 25

5,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.0 8.98 228 2.56 65 13.59 345 12.21 310 73 33 16
3-1/8’’ 3.11 79.0 10.98 279 3.94 100 17.72 450 9.45 240 132 60 20
4-1/16’’ 4.06 104.0 13.00 330 4.59 117 24.61 625 11.50 292 254 115 24

Features
Although the preferred orientation of installation is vertical, the check valve can operate equally well in the

horizontal orientation with its spring loaded Poppet.

The Check Valves are available with a variety of end connections. Flanged, Clamp Hub and Butt Weld

connections or any combination of these are available.

Metal sealing between disc and seat offers advantages over elastomeric seals in applications where chemical

and well fluid attack and extreme temperatures are factors.

Streamlined valve seat area results in less flow turbulence and improves body longevity.

Low Maintenance Operation: The Check Valve is non-lubricated and requires no routine maintenance.

Approved Certification
CE/PED For API 6A Product, Issued by DNV

58 59
 Regular Check Valve LC SC Regular Check Valve

Descrption
Dimensions for LC
The regular check valve is a unidirectional valve and always installed in the horizontal orientation. The
A:Flange face to face
B:Bore centerline to bottom of valve valve opened or closed by virtue of flow force and chosen for clean liquid. It is available in pressure ratings
C:Bore centerline to handwheel top
from 2000-5000psi and bore sizes of 2-1/16" to 7-1/16".

3,000 psi Working Pressure

Size Bore A B C Weight
in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 14.61 371 4.61 117 8.58 218 179 81
3-1/8’’ 3.13 79.4 15.12 384 4.72 120 9.76 248 216 98
4-1/16’’ 4.06 103.2 18.11 460 5.91 150 8.27 210 298 135
7-1/16’’ 7.05 179.0 29.02 737 9.06 230 14.69 373 992 450

5,000 psi Working Pressure

Size Bore A B C Weight
in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 14.61 371 4.61 117 7.28 185 183 83

2-9/16’’ 2.56 65.1 16.61 422 6.00 153 8.27 210 220 100

3-1/8’’ 3.13 79.4 18.62 473 5.51 140 8.66 220 265 120

4-1/16’’ 4.06 103.2 21.61 549 7.09 180 9.96 253 547 248

7-1/16’’ 7.05 179.0 29.02 737 9.06 230 16.77 426 1190 540

10,000 psi Working Pressure Features

Size Bore A B C Weight A hinge and hinge pin provided and mounted so as to permit full movement of the disc.
in mm in mm in mm in mm lb kg
Standard renewable seal welded seat with stellite 6.
1-13/16’’ 1.81 46.1 18.27 464 4.33 110 7.60 193 225 102
2-1/16’’ 2.06 52.4 20.51 521 4.33 110 7.60 193 313 142 Standard swing disc type used in horizontal position for liquid service applications.
2-9/16’’ 2.56 65.1 22.24 565 4.96 126 8.78 223 295 134
There is a reserved standard boss at the bottom of body center line.
3-1/16’’ 3.06 77.8 24.37 619 5.71 145 8.98 228 353 160

Approved Certification
15,000 psi Working Pressure
CE/PED For API 6A Product, Issued by DNV
Size Bore A B C Weight
in mm in mm in mm in mm lb kg
3-1/16’’ 3.06 77.8 23.54 598 6.69 170 12.05 306 705 320
4-1/16’’ 4.06 103.2 29.02 737 10.28 261 13.90 353 1091 495

60 61
 Regular Check Valve SC SC Regular Check Valve

Dimensions for SC Dimensions for SC

A:Flange face to face A:Flange face to face

B:Bore centerline to bottom of valve B:Bore centerline to bottom of valve
C:Bore centerline to handwheel top C:Bore centerline to handwheel top

3,000 psi Working Pressure 10,000 psi Working Pressure

Size Bore A B C Weight Size Bore A B C Weight
in mm in mm in mm in mm lb kg in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 14.61 371 4.25 108 8.54 217 106 48 1-13/16’’ 1.81 46 18.27 464 3.82 97 7.87 200 209 95
3-1/8’’ 2.90 73.7 17.13 435 4.72 120 13.19 335 265 120 2-1/16’’ 2.06 52.4 20.51 521 4.13 105 7.87 200 225 150
4-1/16’’ 4.06 103.2 20.12 511 5.71 145 13.07 332 434 197
7-1/16’’ 7.05 179.0 24.13 613 7.48 190 15.75 400 681 309
9’’ 7.44 189.0 31.50 800 9.25 235 18.50 470 1272 577

5,000 psi Working Pressure

Size Bore A B C Weight
in mm in mm in mm in mm lb kg
2-1/16’’ 2.06 52.4 14.61 371 4.23 108 9.17 233 121 55
3-1/8’’ 2.90 73.7 18.62 473 5.22 133 19.69 500 331 150

62 63
 Full-opening Check Valve SF SF Full-opening Check Valve

Descrption
Dimensions for SF
The full-opening check valve is a unidirectional valve and always installed in the horizontal orientation.
A:Flange face to face
The valve opened or closed by virtue of flow force and chosen for clean liquid. It is available in pressure B:Bore centerline to bottom of valve
C:Bore centerline to handwheel top
ratings from 2000-5000psi and bore sizes of 2-1/16" to 7-1/16".

5,000 psi Working Pressure

Size Bore A B C Weight
in mm in mm in mm in mm lb kg
2-1/16’’ 1.69 42.9 14.61 371 4.23 108 9.54 240 110 50
3-1/8’’ 2.90 66.6 18.62 473 5.22 133 11.22 285 243 110
4-1/16’’ 3.44 87.3 21.61 549 6.10 155 14.17 360 463 210

Features
Full bore,strong flow capacity.

Disc of convex design with better performance, and the arc design can reduce

the pressure loss and turbulent medium.

Optional soft seal and metal seal.

Approved Certification

CE/PED For API 6A Product, Issued by DNV

64 65
 Globe Valve GL GL Globe Valve

Description
Dimensions for Globe valve
The globe valve is a unidirectional valve, with simple structure and ease of maintenance. The valve has a
A:Flange face to face
very short stroke and reliable cutting function and it is also well controlled for flow regulation. B:Bore centerline to bottom of valve
C:Bore centerline to handwheel top
D:Bore centerline to handwheel

3,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 14.61 371 5.28 134 18.70 475 14.00 350 198 90 5
4-1/16’’ 4.06 103.2 20.12 511 9.37 238 20.47 520 18.00 450 595 270 6
7-1/16’’ 7.05 179.0 28.11 714 7.87 200 32.09 815 - Gear Box 1179 535 5

5,000 psi Working Pressure

Size Bore A B C D Weight Full open /close
in mm in mm in mm in mm in mm lb kg Turn Count
2-1/16’’ 2.06 52.4 14.61 371 4.25 108 18.70 475 14.00 350 198 90 5
3-1/8’’ 3.13 79.4 18.62 473 7.44 189 16.93 430 18.00 450 386 175 6
7-1/16’’ 7.05 179.0 41.93 1065 7.87 200 57.28 1455 - Gear Box 2646 1200 4

Features
Impact handwheel supplied at manufacture's option or on customer request.

Anti blow-out stem design with conical backseat surface to permit repacking of valve in the fully open position.

Plug seat surface is standard disc design as well as spherical and flat seating surface is optional on customer

request.

Seat face with stellite 6 is standard design.

Approved Certification
CE/PED For API 6A Product, Issued by DNV

66 67
 Plug Valve PL PL Plug Valve

Description

The valves are intended for both onshore and offshore use. Onshore, the plug valves are used in Dimensions for flanged end PPV plug valve

connection with mobile pumping service units used to kill wells, cement wells, acidize and fracture wells. A:Flange face to face
B:Bore centerline to bottom of valve
They are also used in hydraulic lines to control wellhead protector tools. Offshore, the valves are used in
C:Bottom to handwheel top
a number of applications. They are used in essentially permanent installations in pump rooms to isolate

the discharges of the triplex pumps used in fracturing wells. They have also been used in choke and kill

manifold systems.

3,000 psi Working Pressure

Size Bore A B C Weight
in mm in mm in mm in mm lb kg
1-13/16" 1.81 46 17.99 457 5 127 11.3 287 154.3 70

Features

Excellent sealing provided by precision ground metal-to-metal seal between Seats and plug.

No need to remove valve from line for maintenance.

No special tools needed for operation or maintenance.

Plug bar cap has visible indication of open or closed position.

Flanged body for easier maintenance.

The stem packing can withstand severe temperatures and fluids of fracturing conditions. It’s economical

and convenient to maintain.

The balance stem packings effectively reduce the operation torque.

68 69