st

1 YEAR BREAKUP SYLLABUS OF ELECTRICIAN TRADE PRACTICALS

Week Date Professional Skills (Trade Practical) With Indicative Hours
03-Aug- 1. Visit various sections of the institutes and location of electrical installations. 2. Identify safety symbols and
2019 to hazards. 3. Preventive measures for electrical accidents and practice steps to be taken in such accidents. 4.
1
08-Aug- Practice safe methods of fire fighting in case of electrical fire. 5. Use of fire extinguishers.
2019
13-Aug- 6. Practice elementary first aid. 7. Rescue a person and practice artificial respiration. 8. Disposal procedure of
2019 to waste materials. 9. Use of personal protective equipments. 10. Practice on cleanliness and procedure to
2
19-Aug- maintain it.
2019
20-Aug- 11. Identify trade tools and machineries. 12. Practice safe methods of lifting and handling of tools &
2019 to equipment. 13. Select proper tools for operation and precautions in operation. Care & maintenance of trade
3
24-Aug-
2019
TOOLS
26-Aug- 15. Operations of allied trade tools. 16. Workshop practice on filing and hacksawing. 17. Prepare hand
2019 to coil winding assembly. 18. Practice on preparing T-joint, straight joint and dovetail joint on wooden
4 to 5
10-Sep- blocks. 19. Practice sawing, planing, drilling and assembling for making a wooden switchboard.
2019
11-Sep- 20. Practice in marking and cutting of straight and curved pieces in metal sheets, making holes, securing
2019 to by screw and riveting. 21. Workshop practice on drilling, chipping, internal and external threading of
6 to 7
20-Sep- different sizes. 22. Practice of making square holes in crank handle. 23. Prepare an open box from metal
2019 sheet.
21-Sep- 24. Prepare terminations of cable ends
2019 to 25. Practice on skinning, twisting and crimping.
8
27-Sep-
26. Identify various types of cables and measure conductor size using SWG and micrometer.
2019
28-Sep- 27. Make simple twist, married, Tee and western union joints.
2019 to
9 to 10 28. Make britannia straight, britannia Tee and rat tail joints.
05-Oct-
29. Practice in Soldering of joints/lugs.
2019
07-Oct- 30. Identify various parts, skinning and dressing of underground cable.Make straight joint of different
11 to 2019 to types of underground cable.
12 19-Oct- 31. Test insulation resistance of underground cable using megger.
2019 32. Test underground cables for faults and remove the fault.
33. Practice on measurement of parameters in combinational electrical circuit by applying Ohm’s Law

21-Oct- 34. Different resistor values and voltage sources and analyse by drawing graphs.
13 to 2019 to 35. Measure current and voltage in electrical circuits to verify Kirchhoff’s Law
14 05-Nov- 36. Verify laws of series and parallel circuits with voltage source in different combinations.
2019 37. Measure voltage and current against individual resistance in electrical circuit.
38. Measure current and voltage and analyse the effects of shorts and opens in series circuit.
39. Measure current and voltage and analyse the effects of shorts and opens in parallel circuit.
40. Measure resistance using voltage drop method.
06-Nov-
41. Measure resistance using wheatstone bridge.
2019 to
15 42. Determine the thermal effect of electric current.
20-Nov-
2019 43. Determine the change in resistance due to temperature.
44. Verify the characteristics of series parallel combination of resistors.
45. Determine the poles and plot the field of a magnet bar.
46. Wind a solenoid and determine the magnetic effect of electric current.
47. Measure induced emf due to change in magnetic field.
21-Nov-
48. Determine direction of induced emf and current.
16 to 2019 to
49. Practice on generation of mutually induced emf.
17 07-Dec-
2019
 21-Nov-
16 to 2019 to
17 07-Dec-
2019 50. Measure the resistance, impedance and determine inductance of choke coils in different
combinations.
51. Identify various types of capacitors, charging / discharging and testing.
52. Group the given capacitors to get the required capacity and voltage rating.
53. Measure current, voltage and PF and determine the characteristics of RL, RC and RLC in AC series
circuits.
54. Measure the resonance frequency in AC series circuit and determine its effect on the circuit.
09-Dec- 55. Measure current, voltage and PF and determine the characteristics of RL, RC and RLC in AC parallel
18 to 2019 to circuits.
19 25-Dec- 56. Measure the resonance frequency in AC parallel circuit and determine its effects on the circuit.
2019 57. Measure power, energy for lagging and leading power factors in single phase circuits and compare
characteristic graphically.
58. Measure Current, voltage, power, energy and power factor in three phase circuits.
59. Practice improvement of PF by use of capacitor in three phase circuit.
60. Ascertain use of neutral by identifying wires of a 3- phase 4 wire system and find the phase sequence
using phase sequence meter.
26-Dec-
61. Determine effect of broken neutral wire in three phase four wire system
20 to 2019 to
62. Determine the relationship between Line and Phase values for star and delta connections.
21 13-Jan-
2019 63. Measure the Power of three phase circuit for balanced and unbalanced loads
64. Measure current and voltage of two phases in case of one phase is short-circuited in three phase four
wire system and compare with healthy system
65. Use of various types of cells.
14-Jan- 66. Practice on grouping of cells for specified voltage and current under different conditions and care.
2019 to
25-Jan- 67. Prepare and practice on battery charging and details of charging circuit.
2019 68. Practice on routine, care/ maintenance and testing of batteries.
69. Determine the number of solar cells in series / parallel for given power requirement.
27-Jan- 70. Identify various conduits and different electrical accessories.
2019 to 71. Practice cutting, threading of different sizes & laying Installations.
08-Feb- 72. Prepare test boards / extension boards and mount accessories like lamp holders, various switches,
2019 sockets, fuses, relays, MCB, ELCB, MCCB etc.
73. Draw layouts and practice in PVC Casing-capping, Conduit wiring with minimum to more number of points
27-Jan-
of minimum 15 mtr length.
2019 to 74. Wire up PVC conduit wiring to control one lamp from two different places.
07-Feb-
75. Wire up PVC conduit wiring to control one lamp from three different places.
2019
76. Wire up PVC conduit wiring and practice control of sockets and lamps in different combinations using
switching
77. Wire up concepts.
the consumers main board with ICDP switch and distribution fuse box
78. Prepare and mount the energy meter board.
26/1/20 79. Estimate the cost/bill of material for wiring of hostel/ residential building and workshop.
to 8/2/20 80. Practice wiring of hostel and residential building as per IE rules.
81. Practice wiring of institute and workshop as per IE rules.
82. Practice testing / fault detection of domestic and industrial wiring installation and repair.
25/2/20 83. Prepare pipe earthing and measure earth resistance by earth tester / megger.
to 84. Prepare plate earthing and measure earth resistance by earth tester / megger.
10/3/20 85. Test earth leakage by ELCB and relay.
86. Install light fitting with reflectors for direct and indirect lighting.
87. Group different wattage of lamps in series for specified voltage.
88. Practice installation of various lamps e.g. fluorescent tube, HP mercury vapour, LP mercury vapour, HP
sodium vapour, LP sodium vapour, metal halide etc.
89. Prepare decorative lamp circuit using drum switches
90. Prepare decorative lamp circuit to produce rotating light effect/running light effect.
91. Install light fitting for show case lighting.
92. Practice on various analog and digital measuring Instruments.
93. Practice on measuring instruments in single and three phase circuits e.g. multi-meter, Wattmeter, Energy
meter, Phase sequence meter and Frequency meter etc.
 94. Measure power in three phase circuit using two wattmeter methods.
95. Measure power factor in three phase circuit by using power factor meter and verify the same with
voltmeter, ammeter and wattmeter readings.
96. Measure electrical parameters using tong tester in three phase circuits.
97. Practice for range extension and calibration of various measuring instruments.
98. Determine errors in resistance measurement by voltage drop method. Test single phase energy meter for
its
100.errors.
Dismantle and assemble electrical parts of various electrical appliances e.g. cooking range, geyser,
washing machine and pump set.
101. Service and repair of bell/ buzzer.
102. Service and repair of electric iron, electric kettle, cooking range and geyser.
103. Service and repair of induction heater and oven.
104. Service and repair of mixer and grinder.
105. Service and repair of washing machine.
106. Verify terminals, identify components and calculate transformation ratio of single phase transformers.

107. Perform OC and SC test to determine and efficiency of single phase transformer.
108. Determine voltage regulation of single phase transformer at different loads and power factors.
109. Perform series and parallel operation of two single phase transformers.
110. Verify the terminals and accessories of three phase transformer HT and LT side.
111. Perform 3 phase operation (i) delta-delta (ii) delta-star (iii) star-star (iv) star-delta, by use of three single
phase transformers. (6 Hrs)
112. Perform testing of transformer oil. (6 Hrs)
113. Practice on winding of small transformer. (8 Hrs)
114. Practice of general maintenance of transformer. (5 Hrs)
Project work / Industrial visit Broad Areas:
a) Overload protection of electrical equipment
b) Automatic control of street light/night lamp
c) Fuse and power failure indicator using relays
d) Door alarm/indicator
e) Decorative light with electrical flasher
50-51 Revision
52 Examination
Remarks
11/3/20-18/3/20
20/3/20—4/4/20
5/4/20—25/4/20
27/4/20---5/5/20
7/5/20—26/5/20
27/5/20-9/6/20
11/6/20—25/6/20