Scribd
Upload
45 views

USB Key Tool Creation Quick Start - 2.14

sdaa

Uploaded by

ramibls1981
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

USB Key Tool Creation Quick Start - 2.14

sdaa

Uploaded by

ramibls1981
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

USB Key Tool Creation Quick

Start Guide (Version 2.14)


The steps below outline the process of creating the DOS USB Key and Windows PE
USB Key used in DMIFIT Programing and Branding HP notebooks.
What Hardware do You Need What ZIP Files do You Need

You will need the following items before you begin: You will need to download the following ZIP Files:
NBDMIFIT will have the most
• Three (3) USB Keys (2GB-4GB) • NbDmiFit-2.14.zip
current system files,
• PC Running W10 (10240 / 1511 / TH2 ), W8, W7 • WinPE32-2.13 WINPE32/64 ZIP files are for
creation of USB Key only and
− The DOS USB Key cannot be created on a • WinPE64-2.13 will stay at version 2.13
PC that is running W10 1607 (RS1).

DOS USB Key WINPE 32 / WINPE 64 USB Keys

1. Download the following files to create the key: 1. Extract Files from PE32-2.13.zip
a) http://www.bay- 2. Open a command console window in
wolf.com/utility/usbkey/usbmemkeyboot.zip Administrator Mode -Command Prompt (Admin)
b) http://www.bay- and navigate the extracted files.
wolf.com/utility/usbkey/win98boot.zip a. You must be in administrator mode.
2. Insert a USB Key. 3. Place a USB Key into system
3. Navigate to HP USB Disk Storage Format Tool and 4. Format USB Key
run it with Administrator rights. 1. To wipe the USB key and ready it for the tool,
a) Device: Select your USB Key. go to the command line (Admin Mode) and
enter FormatUsbDisk.cmd.
b) In File System, select FAT32.
2. Select Disk # to be formatted.
c) Format Options, select Quick Format. 3. Confirm
d) In Format Options, select Create a DOS 5. Make USB Key: To extract the files and set-up
startup disk. your USB Key, go to the command line (Admin
e) Select Using DOS system file located at: and Mode) and type in the following where “X:” is your
point it to the location of your DOS boot files volume letter of your USB drive.
(DOS Boot\win98bootdisk) MakeWPE32.cmd “X:“
f) Click Start to format the drive 7. <enter key>, Answer “y”, <enter key>
4. Download Nbdmifit-2.14.zip 8. Process will initiate, and will flash a confirmation
5. Extract all files from Nbdmifit-2.14.zip to the root message and return to command window.
directory of the DOS USB Key. 9. Repeat the process with PE64-2.13.zip file. To
6. DOS USB Key includes both NBDMIFIT & UEFI Tools make the WINPE 64 USB Key, please use:
MakeWPE.cmd “X:”
10. Copy the folder WINDMIFIT from the 2.14 DOS
USB Key, place it in the root directory of the
WINPE 32 / WINPE 64 USB Keys.

© Copyright 2016 HP Development Company, L.P. HP Confidential

You might also like