Scribd
Upload
9 views

Pexip_Infinity_Installation_Checklist_v36.a

Uploaded by

linuxlak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

Pexip_Infinity_Installation_Checklist_v36.a

Uploaded by

linuxlak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Pexip Infinity

Installation checklist

Pexip Infinity installation checklist


Use this checklist to identify the key tasks involved in preparing for and deploying the Pexip Infinity platform. Also, there is a
configuration datasheet below to help you gather the key network and configuration information required.

Prior to installation
1. Download the appropriate Pexip Infinity Management Node installation file from the Pexip download page.
2. Ensure that you have appropriate host servers.
3. Assign network IP addresses and host names for the Management Node and Conferencing Nodes.
4. Create DNS records for your Management Node administration.
5. Create DNS records to allow endpoints/clients to discover your Pexip Infinity Conferencing Nodes.
6. Generate or request certificates (Base64-encoded X.509 PEM format) for the Management Node and Conferencing Nodes.

Hypervisor / host servers


1. Note the CPU model number and the number of cores per socket on the host server to be used with the Conferencing Nodes, as
this determines the maximum number of vCPUs to assign for the Conferencing Nodes.
2. Prior to deploying the Management Node or a Conferencing Node, ensure that all host servers are synchronized to NTP servers.
3. Upload the OVA file (or ZIP for Hyper-V) of the Management Node and run the setup wizard from the hypervisor console.

Pexip Infinity Administrator interface


1. Configure basic Management Node settings after installation (licenses, any additional DNS or NTP servers).
2. Add a system location.
3. Deploy Conferencing Nodes to the location (in conjunction with your hypervisor management tools).
4. Configure the Configured FQDN on the Conferencing Nodes.
5. Verify your node's DNS records. (You can use the tool at http://dns.pexip.com to lookup and check SRV records for a domain.)
6. Replace the self-signed server certificates on the Management Node and Conferencing Nodes with your own certificates that have
been signed by either an external CA or a trusted internal CA.
7. Upload any required chain of intermediate CA certificates to the Management Node.
You can use a tool such as https://www.sslshopper.com/ssl-checker.html to verify certificates and the chain of trust (specify port
5061 i.e. use the format <domain>:5061 for the server hostname to ensure that SIP TLS connections are checked).
8. Configure your VMRs and aliases.
9. Configure the Infinity Gateway (via Call Routing Rules), if required.

Hypervisor maintenance
1. Enable automatic startup on every VM.
2. Backup your Management Node VM, and optionally, your Conferencing Node VMs.

© 2024 Pexip AS Version 36.a November 2024 Page 1 of 2


Pexip Infinity Installation checklist

Pexip Infinity configuration datasheet


Use this datasheet to help you gather the key network and configuration information required for your deployment.

Management Node (installation wizard)

Management Node IP address: ................................................................

Network mask: ................................................................

Gateway IP address: ................................................................

Management Node hostname: ................................................................

Management Node domain: ................................................................

DNS server 1: ................................................................

DNS server 2: ................................................................

NTP server 1: ................................................................

NTP server 2: ................................................................

Management Node (configuration)

VM name: ................................................................

System location 1 name: ................................................................

License entitlement key: ................................................................

Conferencing Nodes

CPU cores per socket on host server: ................................................................


(to determine the size of each node)

Conferencing Node 1 name / VM name: ................................................................

Conferencing Node 1 IP address: ................................................................

Conferencing Node 1 hostname and domain: ................................................................

Conferencing Node 2 name / VM name: ................................................................

Conferencing Node 2 IP address: ................................................................

Conferencing Node 2 hostname and domain: ................................................................

For complete information on how to configure your Pexip Infinity solution, see the Pexip Infinity technical documentation website at
docs.pexip.com.

© 2024 Pexip AS Version 36.a November 2024 Page 2 of 2

You might also like