Scribd
Upload
12 views

AP LAB 2

The document discusses the numerical aperture of optical fibers, explaining its significance in determining the acceptance angle for light propagation. It describes the structure of optical fibers, the principle of total internal reflection, and the mathematical relationships governing light behavior within the fibers. The numerical aperture is defined as the sine of half the acceptance cone angle, indicating the light-gathering capacity of the fiber.

Uploaded by

yempatisambasivarao
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

AP LAB 2

The document discusses the numerical aperture of optical fibers, explaining its significance in determining the acceptance angle for light propagation. It describes the structure of optical fibers, the principle of total internal reflection, and the mathematical relationships governing light behavior within the fibers. The numerical aperture is defined as the sine of half the acceptance cone angle, indicating the light-gathering capacity of the fiber.

Uploaded by

yempatisambasivarao
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1/16/25, 10:46 PM Numerical Aperture of Optical Fiber (Theory) : Laser Optics Virtual Lab : Physical Sciences : Amrita Vishwa

ita Vishwa Vidyapeetham Virtual …

Numerical Aperture of Optical Fiber


Aim:

To find the numerical aperture of a given optic fibre and hence to find its acceptance angle.

What is optic fibre?

Optical fibers are fine transparent glass or plastic fibers which


can propagate light. They work under the principle of total
internal reflection from diametrically opposite walls. In this way
light can be taken anywhere because fibers have enough
flexibility. This property makes them suitable for data
communication, design of fine endoscopes, micro sized
microscopes etc. An optic fiber consists of a core that is
surrounded by a cladding which are normally made of silica
glass or plastic. The core transmits an optical signal while the
cladding guides the light within the core. Since light is guided
through the fiber it is sometimes called an optical wave guide.
The basic construction of an optic fiber is shown in figure (1).

In order to understand the propagation of light through an optical fibre, consider


the figure (2). Consider a light ray (i) entering the core at a point A , travelling
through the core until it reaches the core cladding boundary at point B. As long
as the light ray intersects the core-cladding boundary at a small angles, the ray
will be reflected back in to the core to travel on to point C where the process of
reflection is repeated .ie., total internal reflection takes place. Total internal
reflection occurs only when the angle of incidence is greater than the critical
angle. If a ray enters an optic fiber at a steep angle(ii), when this ray intersects
the core-cladding boundary, the angle of intersection is too large. So, reflection
back in to the core does not take place and the light ray is lost in the cladding.
This means that to be guided through an optic fibre, a light ray must enter the
core with an angle less than a particular angle called the acceptance angle of the fibre. A ray which enters the fiber with an angle greater
than the acceptance angle will be lost in the cladding.

Consider an optical fibre having a core of refractive index n1 and cladding of refractive index n2. let the incident light makes an angle i with
the core axis as shown in figure (3). Then the light gets refracted at an angle θ and fall on the core-cladding interface at an angle where,

---------------------- (1)

By Snell’s law at the point of entrance of light in to the optical fiber we get,

-------------------- (2)

Where n0 is refractive index of medium outside the fiber. For air n0 =1.

https://vlab.amrita.edu/index.php?sub=1&brch=189&sim=343&cnt=1 1/2
1/16/25, 10:46 PM Numerical Aperture of Optical Fiber (Theory) : Laser Optics Virtual Lab : Physical Sciences : Amrita Vishwa Vidyapeetham Virtual …

Numerical Aperture of Optical Fiber


When light travels from core to cladding it moves from denser to rarer
medium and so it may be totally reflected back to the core medium if θ'
exceeds the critical angle θ'c. The critical angle is that angle of incidence
in denser medium (n1) for which angle of refraction become 90°. Using
Snell’s laws at core cladding interface,

or

----------------------- (3)

Therefore, for light to be propagated within the core of optical fiber as


guided wave, the angle of incidence at core-cladding interface should be
greater than θ'c. As i increases, θ increases and so θ' decreases. Therefore, there is maximum value of angle of incidence beyond which, it
does not propagate rather it is refracted in to cladding medium ( fig: 3(b)). This maximum value of i say im is called maximum angle of
acceptance and n0 sin im is termed as the numerical aperture (NA).
From equation(2),

From equation (2)

Therefore,

The significance of NA is that light entering in the cone of semi vertical angle im only propagate through the fibre. The higher the value of im
or NA more is the light collected for propagation in the fibre. Numerical aperture is thus considered as a light gathering capacity of an optical
fibre.
Numerical Aperture is defined as the Sine of half of the angle of fibre’s light acceptance cone. i.e. NA= Sin θa where θa, is called acceptance
cone angle.

Let the spot size of the beam at a distance d (distance between the fiber end and detector) as the radius of the spot(r). Then,

mathvariant=¨normal¨»sin«/mi»«miȤ#952;«/mi»«moÃ

------------------------ (4)

https://vlab.amrita.edu/index.php?sub=1&brch=189&sim=343&cnt=1 2/2

You might also like