0% found this document useful (0 votes)
8 views

Technical_Specifications

Technical_Specifications

Uploaded by

tendersilverline
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
8 views

Technical_Specifications

Technical_Specifications

Uploaded by

tendersilverline
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 58

Annerurc-X

Technical Specifications of l)clivcry 'fable


(iT]NERAL
I. USI
Clinical purpose A portable. collapsible chair/table for peltbrnring an OB/GYN
t.t exanrination or procedure. conrprising a collapsiblc chair structure
having a seat. a back resl. a pair of armrests and a pair of
substantially planar Ieg lests. said chair being rnovable between a
collapsed condition tbl storage and/ or transpon and an
exanrination position in which it enable a patienl to be seated in a
position suitable for an OB/GYN examination or procedure, said
chair rrlrcn in said exarnination position.
Anti rnicro rexine should be provided bl vender.
Used clinical
b1' [irarn ination room
1.2 departmcnt/rvard
TECHNICAI-
2. TECHNICAL CHARACTERISTICS
2.1 Technical r) Should have Head side adjustment 75o up on ratchet
characteristics 2) MS tubular construction
(Specific to this tvpe 3) Perinea cut-out
of device) 4) Should be Mounted on PCV shoe
s) Pre-treated and powder coated
6) ln built sliding side stool
7) Adjustable Lithotomy Rods with rexine covered padded
crutches
8) U-Cut at leg end
3.PHYSICAL CHARACTERISTICS
1_ I Dimensions (metric) I 830 rnm L x 810 mm W x 760 mm H (minirnum)
3.2 Weiqht (lbs, ks) Should be able to support patient weight upto l60kg
.1. Operation Theatrc

5. ACCESSORIES
5.1 1) Mattress 50 mrn with U cut thick should be tear proof
covered with non pinching Rexine, seamlessjoint,
washable and water-proof
6. STANDARDS AND SAFETY
6.1 Certifi cates (Pre.market, sanitan,..);
Performance and safety standards
(spccific to the device typc); Local and /or international
6.2 Local and/ or Manufacturer/supplied should have ISO 13485 certificate for
international quality standard.
7. TRAINING AND INSTALLATION
1.1 Training of staff r) Training of users in operation and basic maintenance;
(medical, 2) Advanced maintenance tasks required shall be
paramedical, documented
technicians)
8. WARRANTY AND MAINTf,NANCE
8.1 Warranty 3 Year
8.2 Maintenance tasks l) Ma intenance rnanual detailing:
2) Complete maintenance schedule;

E-2249lDelivery Table Page 4 of9


Sr. No. Name of the Item
Tubectomy set
1 Fcps Artery Mosquito cvd.12.5cm/5"
2 Fcps Artery Mosquito Str 12.5cm/5"
3 Fcps Artery sp-wells cvd.15cm/6"
4 Fcps Artery sp-wells Str.15cm/6"
5 Fcps Allis Tissue 4x5 Tth 15cm/6"
6 Fcps Kocher(Oschner) cvd 18cm/7"
7 Fcps Babcock Jaw 20CM/8"
8 Fcps Kocher(Oschner) cvd 23cm/9"
9 Fcps Allies Tissue 5x6Tth 20cm/8"
10 Fcps Kocher(Oschner) cvd 20cm/8"
11 Fcps Kocher(Oschner) Str 20cm/8"
12 Fcps Tonsil Artery serr.Birkett.str 19cm/7.5 "
13 Fcps Artery sp-wells cvd 20cm/8"
14 Fcps Artery/Dsctg. Roberts cvd 25cm/10"
15 Fcps Artery Mixer Rt Ald Cvd fine 23cm/9"
16 Needle Holder Mayo-Hegar 25cm/10"
17 Fcps Duval's Lung Holding 25mmJaws 20cm/8"

18 Fcps Sponge Big Loop Foerster str25cm/10"


19 Mayo Scissor str 16.5cm/6.5"
20 Clamp, Bronches Lees Traunil 40mm 90Aof jaws 23cm/9"

21 Bladder Neck Spreader.Khonsari 24cm/9"


22 Cannula,suction Yankauer cp.27cm
23 Retractor Lung Alllison 22cmD/7.0 cmW.32/12.5"

24 Fcps. Dsctg. 3mm Serr. tips. sus 20cm/8"


25 Fcps. Dsctg. sus 3mm 1x2 Tth 15cm/8"
26 Fcps. Dsctg. 3mm Serr. tips. sus 15cm/6"
27 Fcps. Dsctg. 3mm Serr. tips. sus 12.5cm/5"
28 Fcps Towel Backhaus 8cm/3.25"
29 Scalpel/B.p.Handle 14cm No3
30 Retractor Adson 4x4Prong 20mm x20mm sp/Bl.Hinged Arms 26cm/10"

31 Retractor Langenbeck 12mmWx35mmD.21cm/8.25"

32 Fcps.Dsctg.sup 3mm 1x2Tth.15cm/6"


33 Fcps.Dsctg Sup.1x2 Tth 12.5 cm/5"

MTP set
1 MTP Cannula No 5
2 MTP Cannula No 6
3 MTP Cannula No 7
4 MTP Cannula No 8
5 MTP Cannula No 9
6 MTP Cannula No 10
7 MTP Cannula No 11
8 Hagar’s dilators set
9 Vaginal speculum
10 Anterior vaginal wall retractor
11 Vulsellum forceps
12 Sponge holding Forceps
13 Forceps, Ovum, 25 cm Stainless Steel,
14 Uterine sound
IUD set
1 Vaginal speculum- Sims speculum
2 Anterior vaginal wall retractor
3 Vulsellum forceps
4 Sponge holding Forceps
NSV set For Vasectomy
1 Vas Fixation Ring Forceps
2 Artery Forceps 4”
3 Vas Dissecting Forceps
4 Sponge holding Forceps 25cm
5 Towel clip
6 SS Instrument Tray with Lid 8 x 6”
LSCS SET
1 scalpel/BP Handle 14cm no3
2 scalpel/BP Handle 14cm no4
3 Fcps.Dsctg 3mm serr.tips sup 15cm/6"
4 Fcps.Dsctg 3mm serr.tips sup 15cm/6"
5 Fcps.Dsctg sup.1x2ThhNrw15cm/6"
6 Fcps.Dsctg 3mm serr.tips sup 20cm/8"
7 Fcps.Adson1.5mm serr.12cm/4.75
8 Fcps.Adson1.5mm1x2Tth12cm/4.75"
9 Fcps. towl Mayo.15cm/6"
10 Metzenbaum Scissors cvd18cm/7"
11 Metzenbaum Scissors cvd20cm/8"
12 Metzenbaum Scissors str20cm/8"
13 Mayo scissor str16.5cm/6"
14 Mayo scissor ccd21.5cm/8.5"
15 Needle Holder Mayo-hegar18cm/7"
16 Needle Holder Mayo-hegar20cm/8"
17 Fcps. Artery.sp-Wells cvd15cm/6"
18 Fcps. Allies Tissue 4x5Tth15cm/6"
19 Fcps. Allies Tissue 5x6Tth20cm/6"
20 Fcps Babcock 8mm JAW 15CM/6"
21 Fcps Babcock Jaw 20CM/8"
22 Fcps Sponge Big loop Foerster .str.25cm/10"
23 Fcps Green Armytage20cm/8"
24 Fcps Kocher(OSCHNER)cvd20cm/8"
25 Fcps Hysterectomy NDVH Traumanil2x3serr.cvd20 cm/8"

26 Spculumsims.Duckbill.ss.Large
27 Recractor, Roux.D/E set of 3.20 cm/8"
28 Rectractor Doyen 40mmWx35mmDGvd.cvd.23 cm/9.25"

29 Fcps Obstetric Low Wriglrycvd28cm/11"


30 Clamps Umbilical Cord Ring Handle
31 Scissor with notch Suture cutting Spencer
Laparotomy set
1 Fcps. Sponge. Big loop. Foerster. Str. 25 cm/10"

2 Fcps. Artery. Mosquito. Str. 12.5 cm/5"


3 Fcps. Artery. Mosquito. Cvd. 12.5 cm/5"
4 Fcps. Artery. Sp-Well. Str 15 cm/6"
5 Fcps. Artery. Sp-Well. Cvd. 15 cm/6"
6 Fcps.Allis. Tissue. 4x5 Tth. 15 cm/6"
7 Fcps. Babcock. 8 mm Jaw 15 cm/6"
8 Fcps. Kocher (Oschner). Cvd. 16cm/6.25"
9 Fcps. Kocher (Oschner). Str 16 cm/6.25"
10 Fcps. Artery. Sp-well. Cvd. 20 cm/8"
11 Fcps. Artery. Sp-well. Str. 20 cm/8"
12 Fcps. Allis. Tissue. 5x6Tth. 20 cm/8"
13 Fcps. Kocher (Oschner). Str 20 cm/8"
14 Fcps. Kocher (Oschner). Cvd 20 cm/8"
15 Fcps. Babcock. 20 cm/8"
16 Fcps Artery. Mixter. Rt. Ald. Fine 20 cm/8"
17 Fcps. Overholt-Mixter. Cvd. Shnks. 23cm/9"
18 Needle Holder Mayo-Hegar. 15 cm/6"
19 Needle Holder Mayo-Hegar. 20 cm/8"
20 Needle Holder Mayo-Hegar. 30 cm/12"
21 Metzenbaum Scissors, Cvd. 15 cm/6"
22 Metzenbaum Scissors, Cvd. 20 cm/8"
23 Fcps. Intestina. Kocher. Str. 10 cm /4" light elastic blades. 23 cm/9"

24 Fcps. Intestina. Kocher. Cvd. 10 cm /4" light elastic blades. 23 cm/9"

25 Scissor, Suture cutting, Health. Dcs. 15/6"


26 Cannula, Suction. Yankauer. CP. 27cm.
27 Suction Tube. Frazier/ Lempert. Set of 4.1mm-4mm. Length 19cm/7.5"

28 Retractor, Deaver. 25mm W-1" 30 cm / 12"


29 Retractor, Deaver. 50mm W-2" 30 cm / 12"
30 Retractor, Deaver. 40mm W-1.5" 30 cm / 12"
31 Retractor, Deaver. 65mm W-2.5" 30 cm / 12"
32 Retractor, Morris. 50 mm Wx50mmD. 24cm/9/25"

33 Retractor, Morris. 65 mm Wx70mmD. 24cm/9/25"

34 Retractor, Langenbeck. 8mmWx25mmD. 21 cm/8.25"

35 Retractor, Langenbeck. 10mmWx40mmD. 21 cm/8.25"

36 Retractor, Langenbeck. 15mmWx40mmD. 21 cm/8.25"

37 Retractor, Langenbeck. 20mmWx50mmD. 21 cm/8.25"

38 Retractor, Langenbeck. 25mmWx60mmD. 21 cm/8.25"

39 Fcps. Towel. Mayo. 12.5cm/5"


40 Fcps. Dsctg. Waugh. 1x2 Tth. 20cm/8"
41 Fcps. Dsctg. Waugh. 2mm. Serr. 20cm/8"
42 Fcps. Dsctg. Sup. 3mm 1x2 Tth. 20 cm/8"
43 Fcps. Dsctg. Sup. 3mm 1x2 Tth. 15 cm/6"
44 Fcps. Dsctg. 3mm. Serr. Tips. Sup. 20 cm/8"
45 Fcps. Dsctg. 3mm. Serr. Tips. Sup. 15 cm/6"
46 Fcps. Dsctg. 3mm. Serr. Tips. Sup. 30 cm/12"
47 Scalpel/B.P. Handle. 14cm. No. 3
48 Scalpel/B.P. Handle. 14cm. No. 4
49 Scalpel/B.P. Handle. 7. 18 cm
50 Spatula, Reverdin/ Sargent. Bynt. 45x60mm. 28cm/11.25"

51 Retractor, Autostatic. Fenestrated Blades. 16cm/6.25"

52 Suction Tube. Frazier/Lempert. 2mm Lenghth. 19 cm/7.5"

53 Suction Tube. Frazier/Lempert. 3mm/9Fr. Lenghth. 19 cm/7.5"

54 Suction Tube. Frazier/Lempert. 1mm Lenghth. 19 cm/7.5"

55 Fcps. Tissue. Debakey-ATR. 2mm wide jaws. Str. 20 cm/8"

56 Fcps. Tissue. Debakey-ATR. 2mm wide jaws. Str. 40 cm/9.5"

Caesarean section set


1 Sponge holding forceps 10"
2 BP Handle and Blade no 4
3 Toothed Dissecting forceps 5"
4 Non Toothed Dissecting forceps 5 1/2"
5 Curved artery forceps 6 1/2"
6 Curved artery forceps 9"
7 Straight artery forceps 6"
8 Straight artery forceps 9"
9 Ally’s tissue forceps 6"
10 Green Armitage forceps 8 pairs
11 Needle holder8 1/2
12 Needle holder 10"
13 Morris retractor3 3/4
14 Deaver caesarean Retractor Medium
15 Deaver caesarean Retractor Narrow
16 Langen beck retractor Medium
17 Bowl (small size) 6"
18 Kidney tray 8"
19 Mucus sucker
20 Suction tube/catheter
21 S.S Bowls
22 Vaginal Speculum
23 Obstetric forceps 2 pairs 8"
24 Curved Dissecting Scissors
25 Short Dissecting Scissors
26 Long Dissecting Scissors
27 Stich Scissors
28 Babcock Tissue Forceps
29 Dual Tissue Forceps
30 Malleable Copper retractors
31 occlusion clamps Straight
32 occlusion clamps Curved
33 Crushing Clamps large
Annexure-A
Technical Specifications
Sr. no. Item Name Qty(Approx) Average Annual
Turnover required as per
Clause 6
1 Orthopaedic OT Table 4 5 Cr
2 General OT Table 8 5 Cr

Item No.1 : Orthopedic OT Table


Quantity: 4
Sr. no Description of Technical Specification
A General construction characteristics:
1 Mobile operating room Table with electrical hydraulic drive via integrated batteries and
mains power supply.
2 Adjustment for base locked/unlocked via hand control unit by means of a four post, self-
leveling hydraulic locking system.
3 Operating room table in standard configuration of the table top generally capable to
support patient weight 200kg or more
4 In reverse orientation table top generally capable to support patient weight 190 kg or more
5 Table must have inbuilt battery backup for at least 5 hours or more
6 Characteristics of the Operating room table top:
7 Operating room table top is equipped with powered Longitudinal slide or rotating top of at
least 300 mm for unobstructed intraoperative access for the C-arm over the full length
B Table top subdivided into at least 4 section:
1 Head rest, with up / down articulation
2 Back rest
3 Seat plate with perineal cut-out
4 Split Leg rest, detachable
C Additionally the Operating room table top should be equipped with or without a powered a
kidney elevator for >=70 mm between the back and the seat plate to enable stronger
flexion to the patient's body.
D For Additional flexibility Operating room table should allow for the use of several
positioning accessories with or without detachment of back section. Operating room table
top designed completely without X-Ray interfering crossbars, for large scale application
abilities of the C-arm
E Guide rails underneath the table top allow for inserting of X-Ray cassettes over the
complete length including the area of the central seat section or radiographic table top for
seamless x-ray facility.
F Operating room table top surface is constructed of radiolucent Phenolic which provides
superior imaging and strength.
G Control of the adjustment motions:
1 The adjustments of the hydraulically powered motions are controlled electrically from
outside the intervention area via cable / Remote connected hand control. Hand pendant
with backlight.

Tender Enquiry No.: T-376/MPPHSCL/OT Table/QC/2022 Dated: 28-11-2022


Page 1 of 6
2 In case of failure in powered/electrical section, it should function on battery power. Table
should have at least dual control i.e. Remote Panel (Corded remote) and Backup Control
on table column or two hand operated remotes.
H Safety characteristics:
1 Every power adjustment of the table should have dual control, so that in the unlikely case
of a technical failure, every Operating room table adjustment, including locking/
unlocking the table's base, can be operated independently.
2 In case of a total loss of functionality, it should have some foot unlock switch that will
release the floor locks and allow removal of the table.
I Battery-powered/ mains operation:
1 It should have maintenance free special design batteries, with warranty of 3 years. The
battery charge level is monitored electronically and indicated optically on the hand
control/base of the table.
Technical data:
J Dimensions(+/-5% tolerance allowed in the sizes/measurements/ angles/dimensions)
1 Total length of Operating room table Table to incl. head rest:>2000 mm
2 Length of Operating room Table top without head test:> 1500 mm
3 Width of Operating room table top:>650mm
4 Total width of Operating room table top incl. side rails: >650mm
5 upper body imaging window>1000mm
6 Standard lower body imaging>1000mm
7 Radiographic width>550mm
8 Total length table base:>1000mm
9 Max. width of base:>500mm
10 Gross weight of Operating room table >300 kg
11 Admission max. Patient weight full articulation>200kg
12 Admission max. Patient weight (reverse)>190kg
13 Adjustments via hand control unit
14 Height: 670mm - 1000mm or more
15 Height incl. pads: 685 - 1000 mm or more
16 Kidney elevator up infinitely variable:>70mm
17 Lateral tilt left/ right:> 15°/15°
18 Trendelenburg/ Reverse Trendelenburg:> 25°/25°
19 Back plate up/ down: >75°/40°
20 Leg plate up/down:>20°/90° or more
K Also on the hand control unit should have following features and status monitoring
indicators for:
1 0-position (reset of all powered table top functions to horizontal position)
2 Base locked/unlocked
3 Flex/Reflex
4 Beach Chair (position is required but direct key on remote is not mandatory)
5 Charge level indicator of the Operating roomTable batteries and mains connection

Tender Enquiry No.: T-376/MPPHSCL/OT Table/QC/2022 Dated: 28-11-2022


Page 2 of 6
L Table and standard its accessories should be from same manufacturer
1 Arm Board - one hand adjustable with radiolucent
2 Anesthesia Screen should adjusted vertically, horizontally, radial and folded
3 Belt Strap
4 Hand Cuff
5 Split leg plate
6 Knee crutches Goepel Pair
7 Shoulder support in trendelenburg position
8 Gel head pad
9 Narrow Lateral Support, support rolls with Back support, bottom support and for pubis
support.
10 Lateral position set consist of rectangle or circular set.
11 Arm rest
M Trauma unit:
1 Hand arm table Hourglass shape or Rectangle shape with standard Radial clamp.
2 Hand traction
3 Extension unit. Should consist of
 Pelvis plate
 (basic-) adapter
 Joint adapter
 Swivel joint bar
 Traction bar
 (Lateral) filler pieces
 Counter traction post
 Traction unit
 Adjustment clamp
 Foot Plate
 Foot Plate support
 Support bars
 Leg plate
 Counter traction post for tibia treatment
 Side rail elongation
 Leg support
 Traction stirrup
 Cervical traction attachment and bolster for spine surgery
N Machine should be USFDA/ European CE with 4 digit notified body number/CE/
Declaration of conformity /BIS approved for the quoted model and Manufacturer should
be ISO 13485 certified
O Warranty- 3 year and CMC 5 year

Tender Enquiry No.: T-376/MPPHSCL/OT Table/QC/2022 Dated: 28-11-2022


Page 3 of 6
Con,plirn.r shrcr Ior Lrmp \ h nrnd

ImP,.r'r) rrpo'r

t-f- brdrnrb.rekdd
PFTF
l

I q. B,*: .horiic ol cd
Annexure-B

TECHNICAL SPECIFICATIONS OF RADIANT WARMER.

Following are the minimum requirements. Products offered must meet these parameters herein.

Compliance on each
parameter with
detailed
substantiation how
Technical specifications/ composition of tender enquiry the offered product
Sr. Phototherapy Unit. Remarks,
meets the
No. if any
requirement. (Simply
writing as YES/
Complied/ As per
BIS/CE/ISO terms is
not allowed)

It should be microcontroller based radiant warmer with manual and


1.
servo options.

It should have facility to display skin set, skin observed temperature


2.
in degree C and heat power separately.

3. Should have user friendly touch panel control.

4. It should have ceramic or quartz infrared or calrod heater.

It should have audiovisual alarm facility for overheating beyond set


5.
temperature range.

It should have alarm facility for patient temperature less than or


greater than the required temperature i-e above or below the set
6.
range. Machine should sense the skin probe failure and cut off the
heater.

Warmer head should be rotatable in different direction, so as to


7.
allow taking X-ray.

It should have alarm for probe failure, power failure, system failure
8.
and heater failure.
Observation light of 90 to 100 foot candles or 1000 Lux (color
9. temperature range 3700K to 5100K) Should be provided for
inspection.

10. Battery backup for power failure indication during power fail.

The desired temperature range from 25 to 40 degree C and settable


11.
temperature can be from 32 to 38 degree C.

The resolution should be 0.1 degree C and accuracy should be


12.
0.2°C.

Should have a facility to lock the keyboard to avoid unwanted user


13.
modification of the set parameters.

The height of the warmer should be adjustable for different types of


14.
bed.

It should have separate bassinet trolley; bed should be tilt able and
have provision for X-Ray cassette holder, Mattress foam density
15. should be minimum 25Kg/cm³, transparent collapsible side walls
easily detachable for cleaning. Mattress size should be minimum
20” × 30”.

Should have a feather touch operation with large digital display and
16. comprehensive alarms. Control Panel should be liquid proof and
allow easy and hygienic disinfection.

Manual mode can adjust Heater output 10-100% with 10%


17. increment, an auditory and visual alarm shall be given at least
every 15 min.

In manual mode, heater cut off / Switch off , if the maximum


18. irradiance at any point of the mattress area exceeds a total
irradiance level of 10 mW/cm² (between 10 to 30 minutes).

Bed should be about 80-100 cms from the floor and 80-90 cms from
19.
the heat source.

20. Should have lockable castor wheels.

Green indicator light shall be provided to indicate that warmer is


21.
ready for normal use.
Markings on the bassinet and X-Ray cassette holder are mandatory
22.
to enable proper positioning of the baby while doing the X-Ray.

The size of the drop down sides should be such that it is 5” above
23. the mattress surface and should be at least 6mm thick, clear and
transparent.

If there is more than 60% heater output for 10 minutes it should


24.
cutoff with alarm.

For the purpose of cable management there should be at least two


number of tubing ports (edges covered by silicon rings) on the side
25.
walls. The height of the side walls should be minimum 110mm over
the mattress.

X-Ray cassette tray should be at least 750×350mm and should


26.
adopt up to 20mm thick X-Ray cassette.

The baby bed should be crevice free for ease of cleaning, infection
27.
control.

28. The mattress used should be of biocompatible material.

Thermistor based skin temperature probe should be small in size not


more than 10mm diameter and 3-4mm thick to fix the probe firmly
on the infant. Baby contact material should be biocompatible as per
ISO 10993 standard requirement. It should be insulated on one side
29.
and have well conducting non-rusting, non-reacting metallic surface
on the other side. Probe wire should be pliable, thin and soft. The
attachment site of the probe with the wire should also be pliable and
non-stiff.

Settings: 1) Should have Manual mode and Baby (Servo) mode


settings.
30.
2) Mode of operation should be clearly displayed.

3) In servo mode baby set temperature should be 32 to 38 deg C.

User’s Interface: Manual and servo controlled temperature


31.
regulation.
Software and/or standard of communication: LED Display and
32. inbuilt software; Interruption and resolution of the power supply
does not change the preset values.

Others: 1) Device shall not overbalance when placed in any


transport position of normal use on a 10° inclined plane from the
horizontal plane.

2) Transformers of device shall be protected against overheating in


the event of short circuit or overload of any output winding.

3) Patient leakage current should be less than 100µA in normal


33. condition.
4) Temperature on the baby mattress should not exceed 43 deg C
when the warmer is operating under steady temperature condition.

5) Temperature of HEATER GUARDS should not exceed 85°C in


normal use.

6) The Temperature differences on the mattress shall not exceed


2°C.

Physical Characteristics.

Dimensions (Metric) : Specifications upto :2000mm (Height) ×


34.
900mm (Width) × 1100mm (Length).

35. Weight (lbs., kg) : maximum specs : 150Kg.

Configuration: At least 60 degree angle adjustment must be possible


in the heat source and it should provide shielding to the infant in
36.
case of breakage of tubes/ bulbs, All surfaces to be made of
corrosion resistant material.

Noise (in dBA) :Auditory alarm shall have a sound level of at least
65 dBA at a distance of 3 m from the front of the infant radiant
37.
warmer, and the sound level of the alarm shall not exceed 80dBA
on the mattress.

Heat Dissipation : Should maintain up to 36.5 deg. Temperature and


38. the heat disbursed through a exhaust fan, so that effect of UV light
is not disturbed.
Mobility, Portability : Yes, on castors (2 of the castors should have
39.
breaks; castor size can be at least 4 inch)

Energy Source.

40. Power Requirements : 220 to 240v, 50 Hz.

41. Battery Operated : Power failure indication during power fail.

42. Tolerance (to variations, shutdowns) : ± 10% of input.

43. Protection: OVP, earth leakage protection.

44. Power consumption: maximum 800 Watt.

45. Other energy supplies: Solar Heating- desirable; not essential.

ACCESSORIES SPARE PARTS, CONSUMABLES.

Accessories (mandatory, standard, optional) : Should have standard


IV pole(sturdy; on rusting; medical grade stainless steel; adjustable
46. to a max height of 6 feet from the ground level), monitor
tray(12X10 inches;270 deg swivel; fixed at level of warmer display)
and storage trays.

47. Spare parts (main ones) : Skin temperature probes. Quantity?

Consumables / reagents (open, closed system) : Thermal reflector to


48.
fix the skin probe on baby.

ENVIRONMENTAL AND DEPARTMENTAL


CONSIDERATONS.

Atmosphere / Ambiance (air conditioning, humidity, dust .)

Operating condition:
49. –Capable of operating continuously in ambient temperature of 0 to
50 deg C and relative humidity of 15 to 90% in ideal circumstances.

– an ambient air velocity is less than 0.3 m/s.

User's care, Cleaning, Disinfection & Sterility issues :


50. Complete unit to be easily washable and serializable using both
alcohol and chlorine agents.
STANDARDS AND SAFETY.

Performance and safety standards (specific to the device type);


Certificates (pre-market, sanitary, ..); Local and/or international :
Should be FDA / CE (from Notified Body) of class IIb approved
product. Shall meet IEC-60601-1-2:2007 Medical electrical
equipment -- Part 1-2: General requirements for basic safety and
essential performance - Collateral standard: Electromagnetic
compatibility - Requirements and tests (Or Equivalent BIS). Shall
51. meet IEC 60601-2-21: 2009 Medical Electrical Equipment – Part 2-
21: Particular Requirement for the basic safety and essential
performance of infant radiant warmers . should meet IEC 60601-
1:2005 standard requirements.

Baby contact material should be biocompatible as per ISO 10993


standard requirement.

Manufacturer should be ISO 13485 certified

Training of staff (medical, paramedical, technicians) : user training


52.
manual required.

WARRANTY AND MAINTENANCE.

53. Comprehensive warranty 2 years.

The spare list of all spares and accessories (including minor)


54. required for maintenance and repairs in future after guarantee /
warranty period should be attached.

Documentation.

User or Technical or Maintenance manuals (In English) to be


55.
supplied.
TECHNICAL SPECIFICATIONS OF PHOTOTHERAPY UNIT.

Following are the minimum requirements. Products offered must meet these parameters herein.

Compliance on each
parameter with
detailed
substantiation how
Technical specifications/ composition of tender enquiry the offered product
Sr. Phototherapy Unit. Remarks,
meets the
No. if any
requirement. (Simply
writing as YES/
Complied/ As per
BIS/CE/ISO terms is
not allowed)

Phototherapy should be based on LED technology, which after


1. filtering should provide a light of wavelength approximately 450 to
470 nm with peak wavelength of 450-460nm range.
Irradiance to be minimum 35 μW/cm2/nm at 40 cm height and UV
2.
Should not exceed 10-4 W/m2 in 180nm to 400nm.

3. Digital Hour meter showing total exposure time for current patient
to be clearly visible by operator.
4. Effective light field >700 cm².

5. Lamp life should be minimum 20000 hours for LED and should
have timer to indicate its usage.
6. Over temperature safety cut out to be included.

7. Up, down and tilting of head should be possible.

8. The unit should be mounted with castor wheels with brakes.

9. Variation in intensity over 5-6 hours < 10%.

10. The irradiance ratio (min to max) shall be greater than 40 % on


mattress.
11. Green indicator light shall be provided to indicate that equipment is
ready for normal use.
12. Interruption and a restoration of the power supply do not change
preset values. LED heat can be reduced by natural cooling.
13. LED should be protected from free fall.

14. It should not topple on 10 deg inclined angle.


15. The temperature of baby bed and metal surfaces should not exceed
40deg C and 43 deg C for other accessible surfaces.
16. There should be intuitive method to indicate the light surface is at
the appropriate treatment distance.
Mobile stand with movable castors and height adjustment facility
17. along with easy swiveling of source box. Unit can be used along
with Infant care trolley, Radiant Warmer and Incubator.
Settings: UP/DOWN adjustment of Over Head Unit; The
18. phototherapy unit should be able to provide effective treatment for
beds and incubators of varying heights (generally 1.0 to 1.6m).
Adjustment of light intensity may be provided.
19. User's interface: Manual.

20. Software and/or standard of communication: LED Display and


inbuilt software.
Physical Characteristics.

21. Dimensions (metric) : minimum spec: 1650mm Height X 750mm


Width X 500mm Length.
22. Weight (lbs., kg) : <20 kg.

Configuration: Clear cabinet for observation of infant.

Infant bassinette to be an integral unit which should be detachable.

Unit to provide shielding of infant in the event of bulb breakage.


23.
Bulb mounts to have angle adjustment of at least 30 degrees.

All surfaces to be made of corrosion resistant materials.

Light unit tilting facility and height adjustment facility.

24. Noise (in dBA) : <60dBA.

Heat dissipation: The temperature of baby bed and metal surfaces


25. should not exceed 40deg C and 43 deg C for other accessible
surfaces.

26. Mobility, portability: Minimum 3 castors and at least 2 with brakes.

ENERGY SOURCE.

27. Power Requirements : 220 to 240V, 50 Hz.

28. Tolerance (to variations, shutdowns) : •± 10% of input AC.


29. Protection: Electrical protection by resettable overcurrent breakers
or replaceable fuses fitted in both live and neutral lines.
30. Power consumption : Should not be more than 160 W.

31. Other energy supplies: Mains cable to be at least 2.5m length.

ACCESSORIES, SPARE PARTS, CONSUMABLES.

Accessories (mandatory, standard, optional)


32. Complete set of replacement tubes to allow 3 months continuous
operation Two replacement sets of fuses, if replaceable type used.
33. Consumables: Total 500 nos. Infant eye masks of both available
sizes (term and pre term babies).
ENVIRONME NTAL AND DEPARTME NTAL CONSI
DERAT ONS.

Atmosphere / Ambiance (air conditioning, humidity, dust ...)


34. Capable of operating continuously in ambient temperature of 10 to
40 deg C and relative humidity of 15 to 90% in ideal circumstances.

User's care, Cleaning, Disinfection & Sterility issues : Complete


35. unit to be easily washable and serializable using both alcohol and
Chlorine agents.

STANDAR DS AND SAFETY.

Certificates (pre-market, sanitary, ..); Performance and


safety standards (specific to the device type); Local and/or
international: Should be FDA / CE (from Notified Body) approved
product.
Shall meet IEC-60601-1-2:2007 Medical electrical equipment --
Part 1-2: General requirements for basic safety and essential
performance - Collateral
36. standard: Electromagnetic compatibility - Requirements and tests
(Or Equivalent BIS)
Should meet IEC 60601-1:2005 standard requirements
Shall meet IEC 60601-2-50: 2009 Medical Electrical Equipment –
Part 2-50: Particular Requirement for the basic safety and essential
performance of infant phototherapy equipment;
Manufacturer should be ISO 13485 certified
TRAINING AND INSTALLATION.

Pre-installation requirements (nature, values, quality, tolerance) :


37. Supplier to perform installation, safety and operation checks before
Handover.
38. Training of staff (medical, paramedical, technicians): Training of
users in operation and basic maintenance shall be provided.
WARRA NTY AND MAI NTE NANCE.

39. Comprehensive warranty 2 years and 20,000 hours for LEDs.

The spare price list of all spares and accessories (including minor)
40. required for maintenance and repairs in future after guarantee /
warranty period should be attached.

Documentation.

User or Technical or Maintenance manuals (In English) to be


41.
supplied.

The spare list of all spares and accessories (including minor)


42. required for maintenance and repairs in future after guarantee /
warranty period should be attached.
TECHNICAL SPECIFICATIONS OF STRETCHER TROLLEY.
Sr. Technical Specifications Compliance on each
No. parameter with
detailed
substantiation how
the offered product
Remarks,
meets the
if any
requirement.
(Simply writing as
YES/ Complied/ As
per BIS/CE/ISO
terms is not allowed)
1. Overall approx. size: 2020mm-2030mm L x 550mm-
560mm W x 810mm-820mm H.
2. Frame work should be of ERW tubular welded with
vertical upright of 31.75mm OD x 18G ERW tubes.
3. Trolley should be provided with 200mm dia. Swivels
castors wheels.
4. All horizontal stays should be of 25.4mm OD x 18G
tube.
5. Stretcher should be made of SS304 18G sheet dished
horizontally in the middle. Stretcher should be
removable from trolley.
6. Three additional 31.7 x 6mm flat supports that should
be welded to main frame to support SS sheet top from
underneath width wise.
7. Pushing handle at both ends shall be made of 25.4mm x
18G SS tubes.
8. FINISH: All components shall be thoroughly pre-treated
chemically to remove rust and foreign matter like
grease, oil etc. by dip tank processes, including separate
Degreasing, Derusting, phospating each followed by
water rinsing and hot air drying to give phosphate
coating conforming IS 3618-1966 Class ‘C’. The treated
metal surface should then be coated with epoxy
polyester powder with paint film thickness of 60microns
and oven baked at 180 and 200 centigrade. This finish
should exclude stainless parts, some hardware, ebonite
rubber, PVC, castor wheels if any.
9. The company should have ISO 9001:2008 & ISO 13485
certification.
10. All steel section should have powder coating.
11. Pushing handles at both ends should be covered with
PVC sleeves.
12. Two section tops should be smooth edges and burr free.
13. All SS used should be of 304 grade.
Annexure-X
Technical Specification for Operation Table (Hydraulic)
GMDN Name Operation Table Hydraulic Maj or
Clinical purpose An operation table, sometimes called operating room table, is the table
on which the patient lies during a surgical operation, This surgical
equipment is usually found inside the sugery room ofa hospital.
Used by clinical Operation theatre.
Department/ward
TECHNICAL CHARACTERISTICS (SPECIFIC TO THIS TYPE OF DEVICE)
o Should be a manually controlled operating table, working range from floor level: 800-
1040mm + 10%, by foot step control
Should be adjustable to all essential positions
a Should be equipped with movement controls at side ofthe table
Should have Frame and bottom Made of Stainless Steel 304 material
Should have reinforced three section stainless steel top.
Height should be adjustable by oil pump from 800mm-1040mm + 10%, by foot step control.
Should have detachable head rest which can be easily adjustable to any desired position,
above or below table top.
Table top can be rotated 360o through base.
a Trendelenburg : > 25o -30o
a Reversed Trendelenburg: >30'
Head Section Raised from the Horizontal: >20o-30o
a Head Section Lowered from the Horizontal: >28'-30'
Back Section Raised from the Horizontal: >60'-70'
a Leg Section Lowered lrom the Horizontal: >40o-50o
Kindly Position should be achievable by breaking the table
Table-top should be radiolucent.
User's interface Setting Manual
Dimensions (metric) Table top dimension (1900 mm x 525 mm) + l5%
Table elevation: 800 mm - 1 040 mm + 10%
Weight (lbs, kg) Should be able to bear patient having weight up to 1 80 kg
l-Ieat dissipation Heat Dissipation: Should maintain nominal Temp and the heat should be
disbursed throu a coolin mechanism.
Accessories (mandatory) 1. S. S. Arm Rest 1 No
2. Anesthetic Screen 1 No
3. Lithotomy Leg Holders with stir- Ups 1 Set
4. Leather Wristlets 1 Set
5. Padded Leg Rest (Gutter Type) - 2 Nos
6. Anti-static mattress - 2 Nos
7. Side rails- 2 Nos
Atmosphere / Ambiance 1) Operating condition: Capable ofoperating continuously in ambient
(air conditioning, temperalure of 10 to 40deg C and relative humidity of 15 to 90% in ideal
humidity, dust..) circumstances.
2) Storage condition: Capable ofbeing stored continuously in ambient
temperature of 0 to 50 deg C and relative humidity of I 5 to 90o/o
User's care, Cleaning, 1) Disinfection: Parts ofthe Device that are designed to come into
Disinfection & Sterility contact with the patient or the operator should either be capable ofeasy
issues disinfection or be tected by a single use/disposable cover.
2) Sterilization not required
Certificates 1 Should be FDA/CE/BIS a roved uct
Local and / or Manufacturer/su lier should have ISO certification for standard

E- I 093/ Operation Table (Hydraulic) Page 4 of 6


intemational
Pre-installation Safety and operation check before handover
requirements nature,
I
values uali , tolerance
Requirements for sign- Certification ofcalibration and inspection from the manufacturer
olf
Training of staff Training ofusers in operation and basic maintenance shall be provided
(medica[, paramedical, Advanced maintenance tasks required shall be documented
te chnicians)
Warrantv Three years on site with free servicing (min.3 year during warranty &
provide technical support and required spares and consumable for 7 yrs
after warrant eriod
Maintenance tasks Maintenance manual detailin com lete maintainin schedule
Service contract clauses. The spare price list of all spares and accessories (including minor)
including prices required for maintenance and repairs in future after guarantee / warranty
od should be attached.
Operating manuals, 1) User, technical and maintenance manuals to be supplied in
service manuals, other English/Marathi Hindi language along with machine diagrams.
manuals 2) List of equipment and procedures required for local calibration and
routine maintenance.
3) Service and operation manuals (original and copy) to be provided
4) Advanced maintenance tasks documentation.
5)Leather Wristlets 1 Set
6) Padded Leg Rest (Gutt erType)-2Nos
7) Anti-static mattress - 2 Nos
8 Siderails-2Nos
Atmosphere / Ambiance 1) Operating condition: Capable of operating continuously in ambient
(air conditioning, temperature of 10 to 40deg C and relative humidity of 15 to 90% in ideal
humidity, dust...) circumstances.
2) Storage condition: Capable ofbeing stored continuously in ambient
tem rature of0 to 50 de C and relative humidit of 15 to 90% .
User's care, Cleaning, l) Disinfection: Parts ofthe Device that are designed to come into
Disinfection & Sterility contact with the patient or the operator should either be capable ofeasy
issues disinfection or be protected by a single use/disposable cover.
2 Sterilization not uired
Certificates 1 Should be FD{CE/BIS a ved roduct.
Local and/or Manufacturer/supplier should have ISO certificate for quality standard
intemational
Pre-installation Safety and operation check before handover
requirements nature,
values, quality, tolerance
Requirements for sign- Certificate of calibration and inspection from the manufacturer
off
Training of staff Training ofusers in operation and basic maintenance shall be provided
(medical, paramedical, Advanced maintenance tasks required shall be documented
technicians)
Wananty Three years on site with free servicing (min 3 year during warranty &
provide technical support and required spares and consumable for 7 yrs
after warran od
Maintenance tasks Maintenance manual detailin com lete maintaini schedule
Service contract clauses, f
The spare p rl ce I I s 1 o aI I S pares and essories (inclu d lng I11 I 11 or)
including prices qu 1 red for maln t e nan and rep al rs I n future after gu aran t e warran ty
od sho ul d b e atta c he d
E- 10931 Operation Table (Hydraulic) Page 5 of6
Operating manuals, 1) User, technical and maintenance manuals to be supplied in
service manuals, other English/Marathi Hindi language along with machine diagrams.
manuals
2) List of equipment and procedures required for local calibration and
routine maintenance.
3) Service and operation manuals (original and copy) to be provided.
4) Advanced maintenance tasks documentation
5) Certificate of calibration and inspection
Other accompanying List to be provided of important spares and accessories, with their part
documents numbers and cost,
Service, Support Contact l) Contact details ofmanufacturer, supplier and local service agent to be
details (Hierarchy Wise; provided;
including a toll
free/landline number)
Recommendations or Any waming signs would be adequately displayed
wamings

Consignee Details
M/s. Warden Surgical Co. Pvt. Ltd.
Operation Table (Hydraulic)
Make : Warden & Model : WHE-25
Delivery
06 weeks
Period
No.: 75 I z /[Iallkine/ Procurement CelV E-1093/ Operation Table
PO Ref. No. (Hydraulic)/ 2022-23.
Date: 03 I lol zz
fr: lx.o,9.qotz ysnsffq riw ftft Approx. Rate- 1,80,000/- (Stare Plan R.(.-f1)(Qty.- 19)
Sr. No. Name & Address of the Consignee Qt"Y.
l) Rural Hospital, Jeur, Solapur. 0t
2) Rural Hospital. Ashti. Wardha. 0l
3) Sub District Ho ital, Karan a. Washim. 02
4) Rural Hospital, Sonpeth, Parbhani. 0l
s) Rural Hospital, Bhusawal, Jalgaon. 01
6) Rural Hospital, Sawada, Jalgaon. 0l
7) Rural Hospital, Aurad Shahajani, Latur. 0l
8) Rural Hospital, Shirur Anantpal, Latur 0l
e) Women Hospital, Malegaon, Nashik. 02
10) Women Hospital, Dhule. 02
l1) Women Hospital, Ambajogai, Beed. 02
t2) Women Hospital, Washim. 02
13) Women Hospital, Buldhana. 02
Total 19

,Qr'
araH!-dq {q6s,;rffi qrqtt q 6Rf,r \
Dr. d rse
General Manager
Haflkine Bio Pharmaceutical Corporation Ltd.
@rocurement Cell), Mumbai.

E- 1093/ Operation Table (Hydraulic) Page 6 of6


rEcHMc^L sPEcl4c.4]lo-!lq 9E!!!lglI!A!!!j
b
a --rr"di6k"nbin{ u*dn,
i,i."uo .url
itr; * -tt""
ib" .' d6" ',
$.m
ii;!hE. hl.co"" .l0 )

ffi
i#"lffi*xffi.*x*r::=*
o**,.'. *n".,- ''*"a.111,11-
w.re!lMlgl- -
iffiffdla- tst n"oq ao- #fffi*
p"*,"1Yt*mi'*SX
iiiiii,iri,".
,[aL h",ii-iEdd.&r)_=-
i-";;--,.0""."****.,-noro'.d{ori*{rd
BP"ijr.""::,9&*.".,.]d"-ffi
s I c".bE"
,-"."."r-"*rr-"-*
soni",t'-E!r!!!:!!1" "*'rt'

Effiu*"3r#ffiffi -
I
L,+-T;-v*c

tJ"":l--::'Yl+xl*#iH"g,!-""*o"o*edF-
.-;" ;, I lffiTii":3fi ;f i::;;;(,1"5i""'";:il"
a" user!pe9]tc!U9:l!44!

'6'r'21
v-q-

$/ ff{p
Asso6rXtE qRor

ffifi-ffiH
TECHNICAI- SPECIFICATIOI{S,. OrBsi
cyhrn, @nEid Gd b.6_Ea d;a;mrbGi ri;i;
.mp..e d ds .r( ) i a ,bm Ebiz, (rub.ovot ;d b
k4' rhm o .rErH d.sns n.b.eb ,0, m;it;;;i;;r ;
'l
i.cnnic.r.h.Ed.n.rrt rcrn brft ry!.devl4r
P *r^9,1,,,,.
:,r:i,j::.iry: dle ]ei d arlying hand;d.r%is EFI€. b
. *Ilatbi dd;
&.latrFEm{06'19.nddcelI@

sbmqcffdhoidom,bifuF iio'a
oeralf,; lsm
(knF6turc. e6.uE qhr. humidiy .&r .,
I ;;; ;;;;;j:,
rh.@,E bs cr. abr. wir;bohor or ..r1r.i* *6
'o
shourd b€ For e-l
cElppoajdd- _-
rso c...r.sr. hl da;radq!!,r
M",", *;Mdehg;"oder ;*;d
]ehMls@iaM=cffit*6d3h-<-i-
@orMaha6.hrE Pd/cH6rh D.o:bst .
Et!,Esp."r,r i6.r,iq o,G

^--q,*
._
".t
il}}iff*"",

Mtl (tr -
[rry',*r"a"t-
V'a,9"-
-
*,*"1-'Y,'4:*iilJjig
H B.rMEl],:al crLLL"': ASSOCIAIE PROFESSOR
O6r.r'ar !t G.ldl slnh r_
s.lh.G
KE.{ Haoi.l.Par. - '
s. .dt.rlcdla1
rl'db.r.4m012 -
:
s TECHNICAL SPEC F
':'
,\: _Dr*f,ng Orum Sm.ll'
b ftnrE d.€$'dq mtud (oauzs
.h 3i€rirr.. (.ubd&o) ad io rep
m:kbk for medEr *lrviies (ie

h.w ai 3n .t€ e.ing


I
s\ou d lid sth a d'p rak, . cany ns

::
mudb€Etrd.it.,daybo9..b
o Lab.ar voE.Froo!.E preb

f;t

s
l-
\

olol.hlo.EsE

L
l_ L
\ l !"tr!l!t9r!",,
Ary....o.ddo"3lo'bd.. -
Mainreian€ maila d.hr ns omders

t'r- I1
"T-*'
?

l.-
r.. (,
t-_
r-
r-_
-
w>Y 6?

l__
l*_
r-
r-
A o,,. ,ntd
rssodhrf*diiss".
Dc.r,nlnr af6.mr sm.r
s.]n 6LSi ir.dorc.n ca
l*-
!-
S-
N,
sNffi
ry
N*ffi
Ffl,,_-=-..,ffi_-
-N. 'fl"*.;"-:'l:.r-
N - -

N u u*---w

,,it'.,',*',fr*
S. "*t
s
TECHNICAL SPECIFICAIIONS " SUCTIONPI,,MP FOOT OPE

ro 6PiEb ,td, 16r.6, d dh'


Pzi.,r'3 *rq by mE oa.tu
t,
k;;;-
') Mabr. .*mbrY ot ei:.. m
^ b epnF ru.! 6asB d dhr t.r$ m&nd nm s Fbd,,aay by E.ro or
'EV9'i.
*t [ ryrrdry .oi,6 ot a mmuryrmr. (h.jd d r.r{FEd) m
t€ dL r voum c&s. .nd 6.hrbob, ad . midobi.r
3ldbn tubT. ! r.€d ,c tu 68. ot ro6nd.
'i.i
2l oie mm lls r ro m Eu3e, i(

!
a
3 dlry, pdbhro %-
;;**^-,;.**
-
r__- *=""o",*r r. *r*,*;
- l
."1^*-,,"",-*"-,- 0""p.u,;aC,,o
b 50 "c aic Er,w' hutu t d r 5 ro eoq( opsbb ot " I
E,.u.d 10td.0,..^d l
ft dro hun dly .r rs 16 eo%
cmp,.,. mr b h e. ry,ahabb s,ffi ;;;d-d-
'' I d3hndbn r sbiri ksBc
,r sn*r u ro,,rciaJ"pp-J p,.*-
lR{s!I!s-q$rd, csd-e oc.r.r- -a,;,pdb";.bE r&6--
i"" *..,! ,,;,Jd
t "6 !!ppd1
t ailt . p'd'd. l<hne| ,t q.a.**
ffi;]
*i

" ',,,)
Vt41,q*
ghoFEssoR
B.6l s@ry
o.D{tnt{d
^ssocrir
S.GESu{L.lc.It{6
Technical speciflcatlon of lnstrument Trolley
Tsomm-(-,
rasot.,rvrl*soo-_'H, -eghrro_ c or_o
'"-r'
a) Tlbular ledrcal l6fres.s -s 4ffir oo. 13swq -
b) Trc sholv6 of S S. sheet 13sWG wilh d s€d edsss uplo

c) Each shelves wlh prolecliv6 ls rings on three sid6s ollubular


s s Droorgmm o0,r3swc
or s-p;oll@ $,.- ne a+ed ooa r
, 25mn oD oU w_cors v
doublebeaing&doblel@(arang€d.d nutfotm@ntng'
wh€elsshould be litted in.ids vert callv in lubularbar
.\ "G6vr or M.h.hrhtn Publlc H..lth 0.91& irlg d.te ' mu
o€ enb6.€d ar v6'bl. siahl, m-s Eeas') tadaol!
3)AlS S shou d b6 deeplulry ar!
D, lo9 sd'or shoud be rm@rl6dg6c and bu" rtse.nd co ne
.hoLld oe'ouro ofiqorar rh6 e(hould b6rosLaDlo !a
All stainless sL€l sh e6l e siar n r€* ieer I u Des/pipd lse n
manuhcludnq shal b. ol3oa s2 g6ds @n6min9lo |s6011
I 1

AI din6nsions lillb.
@tuid6Ed L€ngih, widlh H.ighl ln
-
mitlimola mm). thckn€ss ln (swc standad Wde
Gauo€J. o'amel.r should
sauge
@n3'der .r oule, D'am6rer (OD) -
rh€ndame lmi€vhcrb63ru,dy vLbErlon r€e6nd s€I

Th6 instumenl trolley sha! b€ p DPe dy @nslrucred wlth a I


weld.d roinL arcunded, cl6an€d and w.ll'foh€d Unless
olheMise speclried fie v6.lical mef,be6 shall b€
peDondiculaG lo th€ whoelb*e and paal6ltooach olher a
rh6 ho,izonblmembeB shallbe al ighl angl6 to $e vencar

Th6 inslrument tbllgy.hal stand s alllhe legs allhe same


tm6on a levelsldace Alllho suia@s 3hallbs smoolh and
ne€ trcm p ning Werding shall lully penelEl€ and 3hallb.
3ound ln ovsry deralland ir sha lbefinished n@h hlh6
o finEhed shge. lheE shal b€ .o exposed sha,p sdg€s in lh6
fa6.'rc or othd uns6alod fomdlion3 which my harbo, d'rl
0 Th6 skerh s hown in lh€ s p ecilicaton 3 ont ind icalive ,or the

L] g)Tender c@m ne€ has Gsetuad ishts to c,hans6 dm.nsons &


skelch at any slage olrender:

'- )/
Lt,,"i,q
-ii;r;6-- ffi,:r.*oE^14 tr,##
a;"*"r"J
t? f or, A.\ ^"Ju"
Technical Specificb.,-,. of Linen Trolley

,'trzu@
";!rbc., & norm 6ft -R-Ca tuoa-nnm.b
lsslrc.cuB€d bended 6t top
ride. LengthwBe hati;ide
- --r

s
5ttucIlre have Tm srtve5 Aolhe,sios boflon h.v6 tubLtar
ho,zonElrE supporE al equ.t dBtane 1 gmm oD
I3S:WG For deta otease €teroN.n ckFr.h
b)Tm Shetves CRCA eheet 18SdG.^bmaty rnd atbonom
c) Proviae debchable 3quarc p astic bean suilabte at haisde
d)Suplonft ut smootl royng a no.rJsteo IOOmr ,25rm
oDP!W5eerr, ooubl. bednng *tn brale rcci,tv shorb oe
Irrled al boltom
.l "Govi olrv.h...3hts. pubtic H6.tth Dopt. Mls
t d.i."
Eltq*lboised 9r v s be s qbt, mlst be eas lv;ada;re
ar componen(s shal b€ thorcushtttt;;Gd;;la-tl;

S
@noveiustdno foc'gn mane, rrkegcso, on ok by d,o ranr
p oce$es in(lud'ng separate Degrcasmg, De.rusl;
hosDhati' s each ro oeo by *"rer,,s ng pasNar-ioa,o
::!r,^dljns to sive D66eh.Ecddns coilr.rlo rs {ruor
b) Thetraeo metd sLrtacesrourdthen!e ocreo url eool
po*de' *'th,tr t.ic^mss or r,n,rur 60 _
Dory€ster
cro's
and ovenbahed 61 1Rn 200..
.) To* B.ctDn lop3 s-oud be rnootn eogee alo ouii ti.e
and
.oreBqr@td be ornd olf so Fdt ile€ sFou,o oe 10 shdo
oo*de' .o"r-9 i.dn be o, q,aoo A 3
sh", pds;,eo" rempn.
spec ied'n lab e I or s t$zr ot tsgl. rh s rnrsh.r,n,ra
eYcude nantes. steetpad3 and hddware rt anv
xrr mitd netshdt be od CRCA and per tS 5il of 2OOS o,
"s
)Ali d memons wil b- @i;&€d=imsrE, \ /id
mirimere(mm) rhickness n gaus" 1 HeEhG
tswc-_ sr""i;J'wi;"
G3uqer D,amere. shourd c;d; *
oure, oia..re.oni
y. vtbration tree and si,
Ihe xotteyshdubepope y@nstrLded ih 6t Etded
xnen
erllmed untels oheNq;
tonts Etunded cteaned 6nd
sF.reo the veri.djm€moe6 sr,.r, ou o"O.no.,ra!oi..
wneerDaee and paE htroe&h othff aid lhe h.n,mjr
membets shat be at dghr angtes ro rh6 vefli.atm4beE
rne ne. rrctevshaltsEnd on a[ rhe teq. althe samp trm.
on, eversu/rce n rm".ra** +"r-u",.oorr.".a i,*
I ggn Prlllg W9!i !gl[a rtury penerrare and.hal bes.ind

6D-
A,o"rJj d F,q;n-2-
12 R or, \nvr,.rJ" ,fu*
S
---

'IEclll,llCAL SPECIFICATIONS "

r..hnr.r chrntu,i. c. (:Fcmc t rhl. rvp..r d.vlc.)


sa... 5r5-' {,
t 1 ov...i-r
2. FEm.l5n.&.! ol ih. rollry:
.) Top a
ui rop
v.nid lEm.
"r'.r,"
x 9somrw) x lsoPnmrH H.qh

lubular s s 254mm oo lsswc


a s s +"a I gswc wnh Eis.d ed!6s upio 2sn al 4ch !id' & h'Ytno
*iUl ,rotgdivs dt^g. oi ..ch !ld6 oI bbuar s s.p p.1$m oo,18swc
c) B€l rh6 kf tu modu, srms€ .vd6 ol $Ee dl.GE @h on' vi$ b'r s
0h€€ s.p.El6 cmpatumnB hodzoiLllv dlwd bv on6

d) On lonq wrli..r tren. oi io, 6ide in .hsr. daL, svmm€Eksr @rolcd iE p6'tc
(h.avy duiy) bdn! .houE ona6 hoi2onhnv
or eotu. rh"r,. or ss *.d rss$rc st ?,!d €dc6 4!o 2inm. /r * e(b e
rvnq wlt p'ol€4v6 t rros oi'a.h..dd
olrubJb'S.s pp61gmm OD rSSwc
0 supponod wrb rcn rud6d loohm r 25m oo Pl.l wh.d3 wilh doud. h-ri'{ I
doubr. ro.* amng.md! nul lor muins oI sh6l. should be flfi€d inlid. ELc{t
h

s) oxygen crine, c.s. sha bo pmvdod ro, oryqd .yllnder 3l ore sid., -oI5.art
shoudhavedUalou*handl6
h) "Gor or .hrE. aPubnc HEtrh D.pt I iltc d.t.i mu.r b6 .mho.$d .r vtla

a) a{ s.s. sh.uld b. d.€p tulry .rsd 36.n18 mld6d . nd porished fln*h6d.


b) Tow s4ton lop3 lhould b€ smolh 6ds.s add bur f.e and om.E shourd bo Dund on

a) A r slam ess 51€er sh*t & sL nre.s steel rub.rpip.s o*d


!!!t.jl!sdd6 cofrm ns b s 6s11 oI 1992 or sGsr
w b6onsdaed-L€nglh wrdh, Heshrin
a b) An dim.nsions
s.us6 (swc - shnd.dwid6 cauqe) o'am€r€r shourd

u c) Ih6 cdrh ofi mull b. sturdy, vib

f*q-

Wu"
essocAYe qiroregc
E

SPEClFlCATlOtlS,.Th€rhometer

r-hr.d .bnd.inh. rsF;iic i;


Rrt. d rno...!6 ftaucm,,r
c-b.&..dlnbo0lcentol.d.

,{d60dEmp.6!r.r o r&ec.; ro, F

rEnheruG-inopeE o.;ic;
r&ha6seeii€tioncomm6
L
i- ltg!::!,ll,* *"
ll--
'+!l ,",*P,.",,,
Technical specification of P.M.Set

AhDutarr.r and retecr'on ewchanilr.35.m,14" s5 01No.


oooratinr Kiife 55 handr€ 17cm/z' !s.0r No.
opehrinS(nit€SSh.ndle, 17cmlr',ss -01 No,
corl'n ahoui.nn8 rnir. s br.d. 1!.h. !:,!!&.
Esmarch sandase s.i*oE 20chhe.q ddy ss l
st..d.rd oleEtiiss.issou 14.m, slAH srn ss " 02 Not
D A\insro.."per0.mslxseht.dts.02\ot
orelrn8io .pi 18osrRiernEdss 02 \o\
Probe 6rooved diredo6 14 cm, ss 01No -
Prnschm.llds13.m,22mmdia,5s,4003m. 01No

LuGschre 16.m chilel1 wldth.0l No


s.ar. bbdoJorsa*'01No

Measurlnrloldln3lrp€ 5 fecr.- 01 no

M€asurinssla$of 500ml..ap.citywirhelrb6tionors0m.-01 No
q!!sd 41
^s1.!!!!:?i-119:!!l!14!
Ma4nlto'fasla$ot 10D w th ted lisht_01No.
Dooble.urued PM necdle - 10Nor
Pon'morted rhreadi N.33iwo bund e 1'
scalDe rwth ment. hindleno.4 wirh deuchable blade no-20& z3- 02 Nos each
oBan,,baby diBirarwetnlnsmach'ne(rabbrop) capa.ity s r3. 01 No.
r shou d be cE or llsFDA APProved
l
/'-\ au+:t-
iis'
5*&t
#c*-
,lCk4+{"
</: Et q Ppt
^l6h,L
CoDpllrnc.rnetfor Lrnp uith st.nd

I
t

LI 3.Dom. Doubr. *srLrighr hcad


Annexure - I
Specification of Wheel Chair Folding
Quantity - 16 (Sixteen)

I) Chrome plated steel frame -,3 /)" mild steel tube

2) Detachable food table CUM writing pad arrangement. (Detachable Desk)

3) Foot Plate : Fixed to main frame and Foldable.

il) Solid Castor

5) Solid Rear Wheels wall self propelling metal \ heel and hand operated

brake arrangement

6) Scat and Backrest made of good quality durable loam roxin 3 layers

(middle layer made of thick 1.11\ as).

7) Drop back handle.

8) Detachable soft padded armrest.

9) Double cross bar for folding mechanism

Dimensions Length : 100 cm to 110 cm

Ileiuht : 89 cm to 92 cm

Width 65 cm to 72 cm in open position

Folded Width : 28 cm to 33 cm in closed position

Scat Width : 46 cm to 51 cm

Seat I leight : 44 em to 46 cm

Seat Length : 42 cm to 45 em Seat

I Might From ground : 48 cm to 53 cm

Solid Rubber rear wheel : 60 cm to 61 cm

Solid Castor : 15 cm to 21 em

`Aleight capacity : 115 kg, to 120kg

Aluminum leg Rest Chest and Leg Straps For Protection Weight at Wheel

("lair : 21 kg to 73 kg

You might also like