3GV19005USABed01.fm Page 3 Dimanche, 15.

juillet 2007 3:22 15

Other

„ Display and display keys

Contains several lines and pages providing information on calls and the features accessible via the 6 keys Customize your terminal.

American
associated with the words on the screen.
The customization features of the telephone are accessed from the Menu page.
Forward icon: pressing the key next to this icon allows you to program or change the
US Receiver „ Indicator light forward feature.
NOEADGR060-000 • flashing green: incoming call Modifying your personal code
Receiver connected. Appointment programmed.
• flashing orange: alarm
Adjust the tilt of the screen Silent mode enabled. Telephone locked. Custo Option
OR
NOEADGR040-040 Display keys: pressing a display key activates the feature shown associated with it on
Alcatel-Lucent IP Touch 4028 Phone / 4029 Digital Phone
the screen.
reach the 'menu'
page
NOEADGR040-050
„ Navigation Set Passwd follow informations
displayed on the screen
OK key: used to validate your choices and options while programming or configu-
NOEADGR010-055 ring.

Left-right navigator: used to move from one page to another.

NOEADGR010-056 Lock / unlock your telephone

Alcatel-Lucent IP Touch 4028 Phone

ef
h old transfer
Up-down navigator: used to scroll through the content of a page. Lock 2a
bc
3d
o
mn
AADGR010-000 r edial 5
jkl 6
3
Back/Exit key: to return to previous menu (short press) or return to first screen
(long press) ; during a conversation, provides access to welcome screens (Menu, reach the 'menu' depending the displayed
Info, ...) and to return to the conversation icon screens. page informations, enter your
NOEADGR010-010 end
password or confirm
„ Welcome screens
Menu page: contains all features and applications ac- your telephone is
NOEADGR020-010 cessible via the keys associated with the words on the locked/unlocked
screen..
Perso page: contains call line keys (allowing supervi-
sion of calls) and programmable call keys.
NOEADGR020-020 Socket for connecting headphones or a Info page: contains information on the telephone and the status of its features: name, telephone num-
handsfree/speaker unit
Alphabetic keypad ber, number of messages, activation of forwar feature, appointment reminder, etc. Adjusting the audio features

NOEADGR020-050 Custo Set

„ Audio keys
„ Call display
END key to terminate a call.
Incoming call. Call in progress or outgoing call. reach the 'menu'
NOEADGR020-060 page
Handsfree/Speaker Key: to make or answer a call without lifting the
receiver.
• lit in handsfree mode or headset mode (short press). Ringing adjust ringing (melody, volume, mode,...) by
AADGR030-000 • flashing in speaker mode (long press). following instructions displayed on the
Intercom/Mute key: screen
• During a call: press this key so that your party cannot hear
you. Call on hold.
NOEADGR050-020 • Terminal idle: press this key so that you can automatically
answer a call without lifting the receiver. Adjusting screen brightness
To adjust the speaker or receiver volume up or down
AADGR040-000 Custo Set Cntrst

If you get two calls at the same time, you can Left-right navigator: used to check calls.
switch from one call to the other by pressing the OK key: used to answer the call checked. reach the 'menu'
NOEADGR050-030 „ Extension unit display key associated with each call. page

An extension unit can be fitted to your tele- Screen

NOEADGR050-010 OR
www.alcatel-lucent.com

phone. This provides additional keys which

can be configured as feature keys, line keys, „ Feature keys and programmable keys
call keys etc. increase or decrease
To affix labels: push the holding strip of the Guide key: used to obtain information on features of the 'menu' page and to program
NOEADGR050-040 key of the 'perso' page. the contrast
unit backwards to you and lift it. Install the la-
bel under the keypad, in the housing designed
for, and place the keypad back into position. Messaging key to access various mail services
If the key flashes, a new voice message or a new text message has been received.
AADGR020-000
'Redial' key: To access the 'Redial' function.

!
To avoid accidentally damaging the set telephone line Hold: the call is placed on hold.
NOEADGR020-030 connector, make sure you position the cord correctly in the Transfer: Transfer the call to another number.
compartment intended for this purpose.

NOEADGR040-010

NOEADGR020-040

AADGR050-000

NOEADGR030-015
 3GV19005USABed01.fm Page 4 Dimanche, 15. juillet 2007 3:22 15

Using your telephone Divert your calls to another number During a call

NOEADGR030-020 Identifying the terminal you are on Forwarding your calls to another number Placing a call on hold (HOLD)
The number of your telephone is displayed on the 'Info' page. During a call, you may place the call on hold and recover it later, on the same telephone.
ef 10:30
bc
2a 3d h old menu main info
NOEADGR030-050 Access the Info page using the navigator. 5
jkl 6
mn
o

Paul

press the key associated dial number press the ok key if

with the type of forward to be called programming is not the call is placed on hold press the 'hold' key to
NOEADGR030-060 required (immediate, if automatically recorded recover the call on hold
Making a call busy, if no reply etc.)
Calling a second person during a call
NOEADGR070-000 bc ef Immediate forwarding to your voice mailbox
2a 3d During a call, you can call a second person (consultation call):
OR OR OR o
mn
jkl 6 10:30
5 h old menu main info bc ef bc ef
2a 3d 2a 3d
OR
NOEADGR070-010 lift the receiver handsfree programmable line key dial the number Paul
5
jkl 6
mn
o

5
jkl 6
mn
o

for your call

press the key associated press the ok key if the first call is placed on number of name of second
To make an external call, dial the outside line access code with 'forward to voice programming is not hold second party party
(9) before dialing your party's number. mailbox' automatically recorded
4
This feature does not allow transfer or conference.
When you return, cancel all forwarding
Answering a call
if necessary, confirm
cancellation of the Transferring a call
OR OR forward
Paul During a call, you may transfer the call to another number.
is calling
press the key next to 'cancel or transfer transfer
bc ef
lift the handsfree press the key next to the 'incoming call' deactivate the forward' 2a 3d
o
mn
receiver icon 5
jkl 6

Directory
Redial press 'transfer' dial the number press to perform
key to be called the transfer

Using dial by name

last number redial Three-way conference
During a call, to establish a three-way conference:
ef
¤Conf 2a
bc
3d ¤Conf
o
mn
jkl 6
5
Making a callback request to a busy number enter the first select the name from the make the call
letters of the displayed list
name press the “conference” number of second press to establish the three-
the number you are calling ¤Callback key party way conference
is busy
Compliance
hang up
select the name from the make the call
Voice message service displayed list This document describes the services available on telephones Alcatel-Lucent 4028 Phone/4029 Digital
Phone connected to an Alcatel-Lucent OmniPCX Office or Alcatel-Lucent OmniPCX Enterprise
Communication Server system. For more information, please consult the User Guide for your 4028
Phone (IP set) or 4029 Digital Phone (digital set). Contact your installer
Programming your call keys pers.
Main Warning: never place your telephone in contact with water. To clean your telephone, you may however
Reviewing your voice mailbox
If the key flashes, a new voice message or a new text message has been received.
Main
PERS.
10:30

… OR
follow informations
displayed on the
screen
use a damp soft cloth. Never use solvents (trichlorethylene, acetone, etc.) which may damage the plastic
parts of your telephone. Never spray it with cleaning products.
Earpiece may retain magnetic objects.
The wording is not contractual and may be subject to change. Some functions of your telephone are
follow informations controlled by a software key and the configuration of the unit.
displayed on the screen press a call key (not programmed) or
a programmable key (f1 or f2) This equipement has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. This Class B digital apparatus complies with Canadian ICES-003. These limits
press the key next to 'review voice or are designed to provide reasonable protection against harmful interference in a residential installation.
text message' Make calls via your programmed call keys This equipment generates, uses and can radiate radio frequency energy and, if not installed ans used in
pers.
Main accordance with the instructions, may cause harmful interference to radio communications. If this
equipment does cause harmful interference, please contact your installer.
10:30

Helen
Main
PERS. Collection of these products at the end of their product life must be done selectively.
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-
Lucent. All other trademarks are the property of their respective owners.
select the party you want call the selected party The information presented is subject to change without notice.

‡3GV19005USAB010725˙ÍÚ‰ to call from the Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
programmed call keys Copyright © 2007 Alcatel-Lucent. All rights reserved.