ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

MODULE 5

Application of ems and waste audit

➢ Environmental Management Systems can help to minimize environmental effects of an
organization or company.
➢ They can help to amplify the productive use of assets that the company has.
➢ They are shown to help to reduce the amount of waste that a company produces.
➢ EMS’s can help to give the public a good picture of the organization that you have and that
you want to be.
➢ They can play a very large role in constructing the consciousness of environmental concern
among people within your organization and that utilize what your organization has to offer
them.
➢ Gain a superior understanding of the environmental effects of business exercises.
➢ Expansion benefits and enhancement of environmental plan execution, through more
productive operations.
➢ Waste audits can determine the effectiveness of your operations
➢ Waste audit reduce the cost
➢ Waste audit measures the success
➢ Waste audit will verify and have access to more accurate data
➢ Waste audit meet certificate standards
➢ Waste audit are required for certain regulatory compliance and reporting purposes

POLLUTION PREVENTION AND CONTROL IN TEXTILE INDUSTRY

➢ Textile industry is concerned with design and production of yarn and cloth and their
distribution.
➢ Textile industry comprises large quantity of water and also need various chemicals and
dyeing agents for the process.
➢ Here arise large quantity of waste in terms of water, energy and other chemical
substances which will directly or indirectly affects the environment.
➢ The pollution may be in the form of air, water or noise .
WATER POLLUTION¢
➢ The consumption of water includes various processes such as sizing, dyeing, and other
end product processes.
➢ The major problem arises chemicals are directly discharged into water bodies.
➢ This water pollution not only affects human beings and house hold animals but also
aquatic animals.
EFFECTS OF WATER POLLUTION
➢ Depletion of dissolved Oxygen
➢ Hinders with self purification process of water.
➢ Clogs the pores of the soil resulting in loss of soil productivity.
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

➢ Corrodes and incrustates the sewerage pipes.

➢ Effects the quality of drinking water in hand pumps making it unfit for human
consumption.
➢ Leads to leakage in drains increasing their maintenance cost.
➢ Impurities in water affect the textile process in many ways. MEASURES TO CONTROL
WATER POLLUTION
➢ Effluent treatment methods can be classified into :
➢ physical, chemical and biological methods;
➢ Exclusive treatment by one of these three methods has proved to be insufficient in
removing colour and other effluent from textile industry wastewater.
➢ Combination of various effluent treatment methods can remove more than 85% of
unwanted matter.
➢ Adoption of best practices:- § Reducing and Recycling Water
➢ Awarness to go green
➢ Practice ―Air Dyeing Technology‖ Air Dyeing Technology is a dyeing process that uses
air instead of water to dye garments, allowing companies to create garments with vivid
designs and colors, without polluting the water and environment .
➢ Bleaching : Chlorine bleach is extremely toxic. An alternative method which is oxygen-
based can be used.
➢ Functional Finishes :Rather than using harsh chemicals to soften and finish the fabric a
finish made of bees wax, Aloe Vera and Vitamin A are a good alternative.
➢ Sizing :Instead of the use of polyvinyl alcohol (PVA) for sizing use of potato starch or
carboxymethylcellulose
AIR POLLUTION
➢ The major air pollution problem in the textile industry occurs during the finishing stages,
where various processes are employed for coating the fabrics.
➢ Air emissions include dust, oil mists, acid vapours, odours and boiler exhausts.
➢ Speculation concerning the amounts and types of air pollutants emitted from textile
operations have been widespread but, generally, air emission data for textile manufacturing
operations are not readily available.
MEASURES TO PREVENT AIR POLLUTION:
➢ In order to prevent the hazards emission from the industry the workers can be advised to
use Material Safety Data Sheets.
➢ Staff members who regularly handle the chemicals can be given adequate training
regarding the over usage of particular chemical and their ill effects on health and
environment.
➢ Height of chimneys should not be less than 30m so that all deadly gases are released out
of the living organisms.
➢ Settling chamber should be used
➢ Filtration method can also be used for filtering the hazardous pollutants in which bed filter,
fiber filters and fabric filters are widely used.

ENVIRONMENTAL MANAGEMENT IN PULP AND PAPER INDUSTRY

ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

India is a vast country with an average of 700 pulp and paper mills. It is one of the highest polluting
industries in India and is highly water intensive. Relatively large wastewater discharges and
accompanied release of high pollution load into the environment is the sequel of high water
consumption and pollution generation in the process of pulp and paper manufacture. Steps are been
taken to preserve the resources, especially water which is an integral part of the pulp and paper
industrial functioning. The need of cleaner production programs has been felt in recent times by
the paper industry by way of a resource and waste minimization concept. In India efforts have
been going on for years to improve house keeping, optimize process parameters, increase recycles
and adopt improved technology. This paper aims at highlighting the process used during
manufacture, sources and types of waste generated and treatment options available for improving
the quality of waste to be discharged.
Sources of Waste Generation
In pulp and paper industry, considerable quantity of water is used in paper making processes.
The quantity of water consumption varies according to the quality and kind of paper to be
manufactured. In addition considerable amount of solid waste and gaseous emission occurs.

(i) Waste Water Generation

➢ Washing wooden chips in large-scale pulp and paper mills using wool as raw material.
➢ Washing of bagasse for separation of pith.
➢ Washing of rice/ wheat before pulping.
2. Pulping and bleaching
➢ Washing of chemically cooked pulp.
➢ Washing of pulp during bleaching.
➢ Pulp cleaning equipments.
3. Stock preparation and paper machine
➢ Cleaning of pulp in cleaning equipment.
➢ Filtration for wire section of paper machine.
➢ Paper machine presses.
4. Chemical recovery
➢ Foul condensate from evaporator and steam surface condenser.
➢ Boiler blowdown.
Beside above major sources of wastewater generation there are frequent leakages of black liquor
from pump glands and its improper handling, which contribute significant color and pollution to
the stream.
(ii) Solid Waste Generation
In pulp and paper industry solid wastes are generated from following operation;
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

➢ Raw material handling.

➢ Rejects from screening and centri-cleaners.
➢ Primary and secondary sludges from wastewater treatment system.
➢ Coal or boiler ash from steam and power genera- tion.
➢ Lime sludges from causticizing section of chemi- cal recovery plant.
(iii) Air Pollution
In pulp and paper industry air pollution is caused due to odour emitting reduced sulphur
compounds such as hydrogen sulphide, methylmercaptan, dimethly sulphide, and particulate
matter SO2 and NOx present in the gases emitted by different process units. Gaseous emission
from pulp and paper mills can be broadly classified into the following categories:
➢ Gases from digesters.
➢ Gases from multiple effect evaporators.
➢ Gases from recovery.
Effluent Treatment Practices in Pulp and Paper Industry
Several control and treatment technologies have been developed to reduce wastewater discharge
from the pulp and paper industry. The two major technology approaches are:
1. At source treatment controls measurements aimed at reducing wastewater volume and pollutant
load discharged from the mill.
2. Wastewater treatment technologies or end-ofpipe treatment system aimed at reducing
discharge of pollutants in the wastewater.
Various approaches for the management of effluent discharged include (Tarar et al. 2000)
Segregation : Highly concentrated and offensive effluents are segregated from relatively
voluminous effluents.
Chemical Recovery: Efficient recovery of chemicals from the spent liquor is an integral part of
modern sulphate (kraft) and soda processes.
Good Housing Keeping: Proper installation and operation of equipment, keeping them well
cleaned before emptying into drain. Avoiding unnecessary biodegradable material to be dumped
into waste stream, reuse of water when possible, reduces considerably the pollution load.
Reclamation and Recycling: About 80-90% reduction in pollution load and 70 % reduction in
effluent volume in chipper house can be achieved through effluent reuse. Similarly recirculation
in multi-stage bleaching operation reduces pollution loads by 30- 80%. Effective fiber recovery
from paper machine can reduce the pollution load by 20- 60% and volume by 60-80% (Birdie
and Birdie, 2008).
Primary Treatment : It includes coagulation & flocculation, floatation and sedimentation. A well
designed clarifier is considered most suitable and is expected to settle 90-95 % of the settleable
solids and removes 25-30% of BOD. Clarifier should be designed for an overflow rate of 30 cubic
meters per square meter per day and a detention time of three hours. Settled sludge is
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

regularly pumped out at about 3% solid consistency. The sludge can be dewatered to spedable
consistency by drying on usual drying beds, vacuum bed filters, and solid bowl centrifuges.
Biological Treatment : Depending upon the conditions at site and degree of treatment required
for final disposal of effluents, biological treatment methods that can be adopted include; oxidation
pond, aeration lagoon, trickling filter with secondary clarifier and activated sludge process.

Pollution prevention and control in Tanning industry

The leather industry is one of the main examples of industries which play an important role in the
Indian economy in terms of exports and employment opportunities, while being blamed for
environmental pollution
Effects of waste discharged from tannery on environment
➢ Pollution of environment by tannery waste is one of the most horrible ecological crisis to
which we are subjected today. Due to lack of proper management facilities the tannery
waste creates environmental pollution day by day.
[23]
➢ About 95% of the tannery industries have been built in unplanned way . These
unplanned tanneries caused environmental pollution very much.

➢ These wastes affect the main elements of environment such as air, water and soil and
the animal or plants living depending on these elements are harmed drastically.
➢ It was showed that the most harmful environmental effect was bad smell to the
surrounding areas which caused environmental pollution

Cleaner technology in Leather Processing

Cleaner technology in leather processing can significantly reduce the costs of environmental
compliance by reducing effluent loadings and chemical costs in leather manufacture.The pressure
to adopt cleaner technologies normally emanates from environmental imperatives such as the need
to meet specific discharge norms, reduce treatment costs or comply with occupational safety and
health standards.
The typical primary targets are:
o lower water consumption,
o improved uptake of chemicals,
o better quality/re-usability of solid waste, and
o reduced content of specific pollutants such as heavy metalsand electrolytes.
.
Waste Minimisation Measures
Systematic implementation of the waste minimisation measures in tannery sector can provide a
viable solution to the environmental problems faced by the tanners as well as assist the tanners in
improving their profitability. The following measures should be taken:
a) All the tanneries shall install water meters and flow meters to measure actual consumption and
waste water discharged. Water consumption rates shall be brought down to less than the prescribed
limits per tonne of hides by taking water conservation measures.
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

b) Process-wise, some of the waste minimisation measures to be adopted by the tannery units
include the following:
i) Soaking: The waste minimisation measures for reducing water consumption inter-alia include:

• Use of counter current system of washing to concentrate the salt and other soluble materials
such as dirt and blood.

• Reuse of the 2nd main soak for dirt soak: Soaking consists of dirt soak and main soak. The main
soak is retained and used for dirt soak for the following batch.

• Reuse of dirt soak: The dirt soak liquor may be collected and added polyelectrolyte toflocculate
and settle the suspended solids. Soak liquor thus treated and filtered can be reused partially in
liming, deliming washes and pickling.

• Drum soaking instead of pit soaking: This will not only reduce water consumption but will also
bring down the soaking time from 12 hrs to 3 hrs. This will enable the tanners to construct solar
evaporation pond in less area thereby using the open land for more productive use.

• Addition of soaking enzymes: Soaking enzymes are added to achieve uniform and thorough
soaking. Further, to improve the treatability of waste water, regular wetting agent should be
substituted with biodegradable wetting agents.

• Stop ''open washing systems‖ in drum washing. Use batch systems only. Batch washinginvolves
washing of hides and skins during processing by introducing the required quantity of clean water
into the processing vessel and using the action of the vessel to achieve the required agitation as
opposed to running water washes which use the inflow and outflow of large quantities of water.
ii) Liming: The following measures shall be adopted to optimise chemical consumption in this
process step. These include:

• Substitution of paste lime by 85% pure calcium hydroxide [Ca(OH)!]: This will bring down the
quantity of consumption of powdered lime to one third ofits original quantity. lt will also reduce
the frequency of cleaning the primary settling tanks which consisted mainly of the lime sludge.

• Use of liming enzymes: Use of liming enzymes will reduce Sodium sulphide (NaS)
consumption by 40%. • Provision of a slight slope in the pasting area: By providing a slight slope
in the pasting area the excess liming paste can be effectively collected and used which is otherwise
washed away in the drain by lime yard workers.

• Reuse of relime liquor: 50% of relime liquor can be retained and reused for liming of
subsequent batches. This will also reduce water consumption in liming. In addition to optimisation
of the chemical consumption in liming section, fleshings can be used to produce biogas, gelatine,
glue and also high-grade protein. This will solve the problem of solid waste disposal from the
liming section.
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

iii) Deliming: Efforts should be made to reduce the water consumption in this section process by
implementing the following measures:

• Use of deliming agents such as ammonium chloride/ ammonium sulphide.

• Use of 2nd delime wash for liming.

• Reduce the use of ammonium by the injection of carbon dioxide gas (mainly applicable for
large tanneries and /or the use of other substitutes deliming agents 10
iv) Pickling: In this process, the following measures should be adopted to reduce salt
consumption: a. Use of drained float for next batch or go directly to tanning. b. Controlling
pickle liquor to 6° - 7° to optimise use of sodium chloride (NaCl).
v) Chrome tanning: The following measures should be adopted to recover chrome fromchrome
tanning process, if it is applicable for the tannery. It may be restricted by the need to produce
leather properties which meat the customer requirement in particular related to dyeing (reduced
fastnesss and less brightness of colours) and fogging. a. Collection of spent chrome liquor after
basification and recovery of chrome from the same. The recovered chrome can be used along with
regular Basic Chrome Sulphate (BCS) for chrome tanning.
vi) Dyeing: The waste minimization measures under this process include the following: a. Use of
soft water for dyeing process to reduce the dye consumption as well as syntans consumption, in
case, the fresh water quantity is not good enough (hardness). b. Use of automated water dosing
systems.

Pollution prevention and control in Sugar industry

1. Installation of sealed flow metre in

a borewells to ascertain usage of fresh water

b at major areas of cold and hot water consumption

c for measuring the effluent from prominent areas

2. Maintenance of log book for recording the daily water consumption and effluent generation

3. Recirculation of water employed in SO gas coolers, massecuite cooling, and elsewhere with proper cooling
2

4. Dry cleaning of factory floors using bagasse

5. Construction of tank to collect hazardous wash water generated

6. Installation of condensate polishing unit (CPU) where high pressure boiler is used
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

7. Use of membrane-based technology to attain brine recovery

8. Use of surplus cooled condensate as make-up water

9. Maintenance of retention time in various units of effluent treatment plant (ETP)

10. Colour coding of pipelines carrying recycled process water and fresh process water

11.Development of proper infrastructure for operation and maintenance of ETP

12.Development of analytical facility for analysis of various streams of water

13’Commissioning of mechanical sludge handling system of adequate capacity

14. Ensuring the analysis of effluent discharge parameters notified under Environment (Protection) Rules, 198
daily basis.

Pollution Control
➢ There is scope of recycling and reuse of water in sugar mills thereby minimising water
consumption and ultimately effluent quantity.
➢ The recycling and reuse of hot condensate water can reduce the water consumption to as
low as. 100-200 litres, as against 1,500-2,000 litres per tonne of cane crushed.
➢ Proper housekeeping, periodic checking and maintenance of pipe joints, valves andglands
further reduces the water consumption and effluent quantity
➢ .The effluents from the sugar industry can be treated added. The preparation of milk of the
lime by conventional biological treatment systems. general, anaerobic biological processes
(oxidation ponds and biomethanation) several advantages over aerobic processes (aerated
lagoons, activated sludge process).
➢ Anaerobic processes are easier to control and operate, produce a lower quantity of sludge
and their costs are lower. Anaerobic processes decompose the organic compounds in an
atmosphere free of oxygen and consequently require significantly less energy as compared
to aerobic processes.
➢ Among the air pollution control of treated equipments; wet collectors and multi-cyclones,
can reduce particulate matter in boiler emissions by 90% or more.
➢ These equipments can reduce ..the concentration of particulate matter to 450 mg/ Normal
cubic metre. Double Sulphitation Process, already adopted by most of the sugar industries,
reduces the quantity of lime sludge and press mud to a I great extent.
➢ The lime sludge is usually dumped in low lying areas, whereas press mud is sold to farmers
as it can be used as manure.
➢ Bagasse is either used as fuel or sold to pulp and paper industry which use them as raw
materials.. Molasses produced in sugar industry is raw materials for fermentation
industries.

ELECTROPLATING INDUSTRY
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

Pollution Prevention and Control Plating involves different combinations of a wide variety of
processes, and there are many opportunities to improve on traditional practices in the industry. The
improvements listed below should be implemented where possible.
1. Changes in Process
➢ Replace cadmium with high-quality, corrosion-resistant zinc plating. Use cyanide-free
systems for zinc plating where appropriate. Where cadmium plating is necessary, use bright
chloride, high-alkaline baths, or other alternatives. Note, however, that use of some
alternatives to cyanides may lead to the release of heavy metals and cause problems in
wastewater treatment
➢ Use trivalent chrome instead of hexavalent chrome; acceptance of the change in finish
needs to be promoted.
➢ Give preference to water-based surface-cleaning agents, where feasible, instead of organic
cleaning agents, some of which are considered toxic.
➢ Regenerate acids and other process ingredients whenever feasible.

2. Reduction in Dragout and Wastage

➢ Minimize dragout through effective draining of bath solutions from the plated part, by,
for example, making drain holes in bucket-type pieces, if necessary.
➢ Allow dripping time of at least 10 to 20 seconds before rinsing
➢ Use fog spraying of parts while dripping.
➢ Maintain the density, viscosity, and temperature of the baths to minimize dragout.
➢ Place recovery tanks before the rinse tanks (also yielding makeup for the process tanks).
The recovery tank provides for static rinsing with high dragout recovery

3. Minimizing Water Consumption in Rinsing Systems

Testing is required to determine the optimum method for any specific process, but proven
approaches include:
➢ Agitation of rinse water or work pieces to increase rinsing efficiency
➢ Multiple countercurrent rinses
➢ Spray rinses (especially for barrel loads)

4. Management of Process Solutions

➢ Recycle process baths after concentration and filtration. Spent bath solutions should be sent
for recovery and regeneration of plating chemicals, not discharged into wastewater
treatment units.
➢ Recycle rinse waters (after filtration).
➢ Regularly analyze and regenerate process solutions to maximize useful life. • Clean racks
between baths to minimize contamination.
➢ Cover degreasing baths containing chlorinated solvents when not in operation to reduce
losses. Spent solvents should be sent to solvent recyclers and the residue from solvent
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

recovery properly managed (e.g., blended with fuel and burned in a combustion unit with
proper controls for toxic metals).
ELCROPLATING INDUSTRY
The key production and control practices that will lead to compliance with emissions guidelines
can be summarized as follows:
o Use cyanide-free systems.
o Avoid cadmium plating.
o Use trivalent chrome instead of hexavalent chrome.
o Prefer water-based surface cleaning agents where feasible, instead of organic
cleaning agents, some of which are considered toxic.
o Minimize dragout.
o Use countercurrent rinsing systems; recycle rinse waters to the process after
treatment.
o Regenerate and recycle process baths and rinse waters after treatment.
o Recycle solvent collected from air pollution control systems.
o Send spent solvents for recovery.
o Do not use ozone-depleting substances.
o Manage sludges as hazardous waste. Reuse sludges to the extent feasible but
without releasing toxics to the environment.
Hazardous-waste management,
➢ the collection, treatment, and disposal of waste material that, when improperly handled,
can cause substantial harm to human health and safety or to the environment.
➢ Hazardous wastes can take the form of solids, liquids, sludges, or contained gases, and they
are generated primarily by chemical production, manufacturing, and other industrial
activities. They may cause damage during inadequate storage, transportation, treatment,
or disposal operations.
➢ Improper hazardous-waste storage or disposal frequently contaminates surface waterand
groundwater supplies as harmful water pollution and can also be a source of dangerous
land pollution.
➢ People living in homes built near old and abandoned waste disposal sites may be in a
particularly vulnerable position. In an effort to remedy existing problems and to prevent
future harm from hazardous wastes, governments closely regulate the practice of
hazardous-waste management

Hazardous-waste characteristics
➢ Hazardous wastes are classified on the basis of their biological, chemical, and physical
properties. These properties generate materials that are either toxic, reactive, ignitable,
corrosive, infectious, or radioactive.
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

➢ Toxic wastes are poisons, even in very small or trace amounts. They may have
acute effects, causing death or violent illness, or they may have chronic effects, slowly
causing irreparable harm. Some are carcinogenic, causing cancer after many years of
exposure. Others are mutagenic, causing major biological changes in the offspring of
exposed humans and wildlife.
➢ Reactive wastes are chemically unstable and react violently with air or water. They cause
explosions or form toxic vapours. Ignitable wastes burn at relatively low temperatures
and may cause an immediate fire hazard. Corrosive wastes include strong acidic oralkaline
substances. They destroy solid material and living tissue upon contact,by chemical
reaction.

➢ Infectious wastes include used bandages, hypodermic needles, and other materials from
hospitals or biological research facilities.
➢ Radioactive wastes emit ionizing energy that can harm living organisms. Because some
radioactive materials can persist in the environment for many thousands of years before
fully decaying, there is much concern over the control of these wastes.
➢ However, the handling and disposal of radioactive material is not a responsibility of local
municipal government. Because of the scope and complexity of the problem, the
management of radioactive waste—particularly nuclear fission waste—is usually
considered an engineering task separate from other forms of hazardous-waste management

Treatment
➢ Hazardous waste can be treated by chemical, thermal, biological, and physical methods.
➢ Chemical methods include ion exchange, precipitation, oxidation and reduction, and
neutralization.
➢ Among thermal methods is high-temperature incineration, which not only can detoxify
certain organic wastes but also can destroy them.
➢ Special types of thermal equipment are used for burning waste in either solid, liquid, or
sludge form. These include the fluidized-bed incinerator, multiple-hearth furnace, rotary
kiln, and liquid-injection incinerator. One problem posed by hazardous-waste incineration
is the potential for air pollution.
➢ Biological treatment of certain organic wastes, such as those from the petroleum industry,
is also an option. One method used to treat hazardous waste biologically iscalled
landfarming. In this technique the waste is carefully mixed with surface soil on a suitable
tract of land.
➢ Microbes that can metabolize the waste may be added, along with nutrients. In some
cases a genetically engineered species of bacteria is used. Food crops are not grown on the
same site. Microbes can also be used for stabilizing hazardous wastes on previously
contaminated sites; in that case the process is called bioremediation.
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

➢ The chemical, thermal, and biological treatment methods outlined above change the
molecular form of the waste material.
➢ Physical treatment, on the other hand, concentrates, solidifies, or reduces the volume of the
waste. Physical processes include evaporation, sedimentation, flotation, and filtration.Yet
another process is solidification, which is achieved by encapsulating the waste in concrete,
asphalt, or plastic.
➢ Encapsulation produces a solid mass of material that is resistant to leaching. Waste can
also be mixed with lime, fly ash, and water to form a solid, cementlike product

Disposal methods
1: Underground disposal
➢ The only way this method is compliant is when the hazardous waste is brought to mines
that are either inactive or partially active (along with meeting additional geological and
technical specifications).
➢ Many companies need to dispose of radioactive waste, whether from medical treatments,
laboratory experiments, nuclear fuel production, or radioactive ore mining. For those cases,
this method is considered a strong, cost-effective option.
➢ These hazardous waste facilities will vary in their sustainability, per the EPA. The agency
is responsible for protecting people and the natural world by verifying that these units’
design, operation, and maintenance adhere to its standards.

2: Landfill disposal
➢ Dumpsites and landfills are the most commonly used and oldest method of waste disposal.
Hazardous waste landfills are specially built and are NOT intended for liquid wastes. They
are engineered and excavated so that they are within the ground rather than piling upward.
➢ These landfills are lined with clay, HDPE, or other non-porous materials to prevent the
waste from leaching into the ground. Wind dispersal controls, leak protection systems, and
a double liner are additional protections so that humans and the environment come into
contact with as little of the waste as possible.
➢ Human health is generally not impacted by hazardous waste landfills. However, it is
possible for people near the landfill to be harmed if there is a leak.

#3: Ocean dumping

➢ For the avoidance of groundwater contamination, deep-sea depositing is sometimes used.
It is necessary to treat hazardous waste before ocean dumping to minimize the impact on
marine life. This treatment is important to human health, too, since the waste can make its
way to humans when they consume seafood. Some environmental agencies ban this.
practice, but it is allowed by the EPA if you have a permit and strictly follow its guidelines
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

➢ Regarding sustainability, treatment is critically important. Radioactive waste, industrial

waste, and sludge all cause considerable ocean pollution. Mercury and cadmium, toxic
heavy metals, are within about 10 percent of dredged material.

Hazardous Waste Disposal Alternative: Recycling

➢ A federal analysis revealed that 1.5 tons of hazardous waste were managed through
recycling in 2017. Recycling is preferable to disposing of hazardous wastes for numerous
reasons. It results in economic benefits, decreases our raw material reliance nationally,
conserves natural resources, prevents pollution, and cuts energy use.
➢ Any of the following are ways that recycling can be achieved:
➢ Reclaiming – Regeneration or processing to recover a useful product
➢ Reuse/use – Substituting it for another product or using it as an industrial ingredient
➢ Burning to recover energy – Burning for fuel
Disposal through use – Placement of waste on the land

Transboundary movement
➢ Any movement of hazardous wastes or other wastes from an area under the national
jurisdiction of one State to or through an area under the national jurisdiction of another
State or to or through an area not under the national jurisdiction of any State, provided at
least two States are involved in the movement
➢ Controlling transboundary movements of hazardous and other wastes is a corner stone of
the Basel Convention.
➢ Parties to the Basel Convention have the overall obligation to ensure that transboundary
movements of hazardous and other wastes are minimized and that any such movement is
conducted in a manner which will protect human health and the environment.
➢ In addition to these general obligations, the Convention provides that transboundary
movements can only take place if certain conditions are met and if they are in accordance
with certain procedures.
➢ Parties are under an obligation to take the appropriate measures to ensure that
transboundary movements of hazardous wastes and other wastes are only allowed if one
of the three following conditions is met:
➢ the State of export does not have the technical capacity and the necessary facilities,
capacity or suitable disposal sites in order to dispose of the wastes in question in an
―environmentally sound manner‖; or
➢ the wastes in question are required as raw material for recycling or recovery industries in
the State of import; or
➢ the transboundary movement in question is in accordance with other criteria decided by
the Parties (such criteria will normally be found in the decisions adopted by the
Conference of the Parties)
➢ In all cases, the Convention requires that the standard of environmentally sound
management of hazardous wastes or other wastes is met. Environmentally sound
management means taking all practicable steps to ensure that hazardous wastes or other
ENVIRONMENTAL PROTECTION MANAGEMENT (21CV753) By: Dhanashree N Nerlikar

wastes are managed in a manner which will protect human health and the environment
against the adverse effects which may result from such wastes.
➢ In addition to these conditions, the Basel Convention specifies instances in which Parties
may restrict transboundary movements and instances in which Parties must restrict
transboundary movements.
➢ Finally, the Basel Convention requires that only persons authorized or allowed to
transport or dispose of wastes undertake such operations and that wastes subject to a
transboundary movement be packaged, labelled and transported in conformity with
generally accepted and recognized international rules and standards.