Scribd
Upload
11 views

Tutorial 1a- Getting Started With Auto CAD

This document outlines the first tutorial for the course UES101: Engineering Drawing, focusing on getting started with AutoCAD. It instructs tutors to select representative problems for evaluation sessions and additional problems for practice sessions. The tutorial includes specific components to be drawn and fully dimensioned, such as M-Block, Filler, Shim, Link, Pivot Arm, and Shaft Bracket.

Uploaded by

Naman Arora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

Tutorial 1a- Getting Started With Auto CAD

This document outlines the first tutorial for the course UES101: Engineering Drawing, focusing on getting started with AutoCAD. It instructs tutors to select representative problems for evaluation sessions and additional problems for practice sessions. The tutorial includes specific components to be drawn and fully dimensioned, such as M-Block, Filler, Shim, Link, Pivot Arm, and Shaft Bracket.

Uploaded by

Naman Arora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MECHANICAL ENGINEERING DEPARTMENT

Course No.: UES101 Course Title: ENGG. DRAWING


Tutorial No. 1 (Part A)
(Getting started Auto CAD)
Note: (Time: 1 Hour 40 minutes each)
 Tutors to select three to four representative problems to be covered in the Auto CAD evaluation
sessions.
 Tutors to select rest of the problems to be covered in the practice sessions.

Create and fully dimension the drawing of the following components


M-Block Filler

Shim Link

Pivot Arm Shaft Bracket


MECHANICAL ENGINEERING DEPARTMENT
Course No.: UES101 Course Title: ENGG. DRAWING

You might also like