Scribd
Upload
3 views

Computer Networks Lab_Routers

The document outlines the network topology for a system divided into three subnets: Students, Admin Block, and Faculty, each with specific IP schemes and router configurations. It details the router configurations, DHCP settings, and OSPF configurations for each subnet, ensuring connectivity and service provision across the network. Additionally, it mentions the use of a single server for web, DNS, and mail services, along with configurations for email and HTTP services.

Uploaded by

Khurram Shehzad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

Computer Networks Lab_Routers

The document outlines the network topology for a system divided into three subnets: Students, Admin Block, and Faculty, each with specific IP schemes and router configurations. It details the router configurations, DHCP settings, and OSPF configurations for each subnet, ensuring connectivity and service provision across the network. Additionally, it mentions the use of a single server for web, DNS, and mail services, along with configurations for email and HTTP services.

Uploaded by

Khurram Shehzad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

NAME: MUHAMMAD KHURRAM SHEHZAD

REG #: FA23-BSE-070
CLASS: BSE-3B
COURSE: COMPUTER NETWORKS

NETWORK TOPOLOGY:

1. The Left most Subnet is for Students. (IP Scheme: 192.168.10.0), It is connected to other
networks through Router_1,
Gateway of this Network is 192.168.10.1 subnet Mask 255.255.255.0

2. The Middle Subnet is Admin Block Where servers are present and administration PCs are
there. (IP Scheme: 192.168.20.0), it is connected to other networks through Router_2,
Gateway of this network is 192.168.20.1 subnet Mask 255.255.255.0

3. The Right most Network is for Faculty. (IP Scheme: 192.168.30.0), it is connected to other
networks through Router_3,
Gateway of this network is 192.168.30.1 subnet Mask 255.255.255.0

4. Same Server is used to provide all services i.e Web Services, DNS services and Mail
Services.
Student Network (Router 1):
1. Router Configuration:

Router>en

Router#config t

Router(config)#int Gig0/0

Router(config-if)#ip add 192.168.10.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int Gig0/1

Router(config-if)#ip add 10.0.0.1 255.255.255.0

Router(config-if)#no shut
Router(config-if)#exit

2. DHCP Configuration:

Router#config t

Router(config)#ip dhcp pool Students

Router(dhcp-config)#network 192.168.10.0 255.255.255.0

Router(dhcp-config)#default-router 192.168.10.1

Router(dhcp-config)#dns-server 192.168.20.2

Router(dhcp-config)#exit

Router(config)#ip dhcp pool pool1

Router(dhcp-config)#network 10.0.0.0 255.255.255.0

Router(dhcp-config)#default-router 10.0.0.1

Router(dhcp-config)#dns-server 192.168.20.2

Router(dhcp-config)#exit

Router(config)#exit
3. OSPF Configuration:

Router#config

Router(config)#router ospf 1

Router(config-router)#network 192.168.10.0 0.0.0.255 area 0

Router(config-router)#network 10.0.0.0 0.255.255.255 area 0

Router(config-router)#exit

Router(config)#

Admin Network (Router 2):


1. Router Configuration:

Router>enable

Router#config t

Router(config)#interface Gig0/0

Router(config-if)#ip add 192.168.20.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int Gig0/1

Router(config-if)#exit

Router(config)#int Gig0/1

Router(config-if)#ip add 10.0.0.2 255.255.255.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int Gig0/2

Router(config-if)#ip add 20.0.0.2 255.255.255.0

Router(config-if)#no shut

Router(config-if)#exit
2. DHCP Configuration:

Router(config)#ip dhcp pool admin

Router(dhcp-config)#network 192.168.20.0 255.255.255.0

Router(dhcp-config)#default-router 192.168.20.1

Router(dhcp-config)#dns-server 192.168.20.2

Router(dhcp-config)#exit

Router(config)#ip dhcp pool pool1

Router(dhcp-config)#network 10.0.0.0 255.255.255.0

Router(dhcp-config)#default-router 10.0.0.2

Router(dhcp-config)#dns-server 192.168.20.2

Router(dhcp-config)#exit

Router(config)#ip dhcp pool pool2

Router(dhcp-config)#network 20.0.0.0 255.255.255.0

Router(dhcp-config)#default-router 20.0.0.2

Router(dhcp-config)#dns-server 192.168.20.2

Router(dhcp-config)#exit

3. OSPF Configuration:

Router(config)#router ospf 1

Router(config-router)#network 192.168.20.0 0.0.0.255 area 0

Router(config-router)#network 10.0.0.0 0.255.255.255 area 0

Router(config-router)#network 20.0.0.0 0.255.255.255 area 0

Router(config-router)#exit

Router(config)#

Faculty Network (Router 3):


1. Router Configuration:

Router>en
Router#config t
Router(config)#int Gig0/0
Router(config-if)#ip add 192.168.30.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit

Router(config)#int Gig0/1
Router(config-if)#ip add 20.0.0.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#

2. DHCP Configuration:

Router(config)#ip dhcp pool pool2

Router(dhcp-config)#network 20.0.0.0 255.255.255.0


Router(dhcp-config)#default-router 20.0.0.1
Router(dhcp-config)#dns-server 192.168.20.2
Router(dhcp-config)#exit
Router(config)#

Router(config)#ip dhcp pool faculty


Router(dhcp-config)#network 192.168.30.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.30.1
Router(dhcp-config)#dns-server 192.168.20.2
Router(dhcp-config)#exit
Router(config)#

3. OSPF Configuration:

Router(config)#router ospf 1
Router(config-router)#network 192.168.30.0 0.0.0.255 area 0
Router(config-router)#network 20.0.0.0 0.255.255.255 area 0
Router(config-router)#exit
Router(config)#
DNS SERVER CONFIGURATION:
MAIL SERVICES:
Email Configuration of different PCs.
Email Exchange Between PCs:
HTTP Services:
Accessing Web Page from PC:

You might also like