Winstar Display Co.

, LTD
華凌光電股份有限公司
WEB: http://www.winstar.com.tw E-mail: [email protected]

SPECIFICATION

MODULE NO.: WF50BTIAGDNT0#

General Specifications
Item Dimension Unit
Size 5.0 inch
Dot Matrix 800× 3(RGB) × 480 dots
Module dimension 120.7(W) ×75.8(H) ×4.3 mm
Active area 108(W) ×64.8 (H) mm

Dot pitch 0.135(W) ×0.135(H) mm

LCD type TFT, Normally White, Transmissive

With /Without TP With RTP

Surface Anti-Glare
*Color tone slight changed by temperature and driving voltage.

WF50BTIAGDNT0# 第 1 頁，共 4 頁
Absolute Maximum Ratings
Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

Electrical Characteristics
Values
Item Symbol Unit
Min. Typ. Max.
Power voltage VDD 3.1 3.3 3.5 V

Current for Driver(Black) Idd - 110 170 mA

Input logic high voltage VIH 0.7 VDD - VDD V

Input logic low voltage VIL 0 - 0.3 VDD

WF50BTIAGDNT0# 第 2 頁，共 4 頁
Interface
Pin Symbol Function
1 VLED- Power for LED backlight (Cathode)
2 VLED+ Power for LED backlight (Anode)
3 GND Power Ground
4 VDD Power voltage
5 R0 Red data (LSB)
6 R1 Red data
7 R2 Red data
8 R3 Red data
9 R4 Red data
10 R5 Red data
11 R6 Red data
12 R7 Red data(MSB)
13 G0 Green data(LSB)
14 G1 Green data
15 G2 Green data
16 G3 Green data
17 G4 Green data
18 G5 Green data
19 G6 Green data
20 G7 Green data(MSB)
21 B0 Blue data(LSB)
22 B1 Blue data
23 B2 Blue data
24 B3 Blue data
25 B4 Blue data
26 B5 Blue data
27 B6 Blue data
28 B7 Blue data(MSB)
29 GND Power Ground
30 CLK Sample clock
31 DISP Display on/off
32 HSync Horizontal sync input
33 VSync Vertical sync input
34 DE Data input enable
35 NC No connection
36 GND Power Ground
37 XR Right electrode
38 YD Down electrode
39 XL Left electrode
40 YU Top electrode

WF50BTIAGDNT0# 第 3 頁，共 4 頁
Contour Drawing
TFT Outline 120.7±0.5
TP Outline 119.70±0.2 0.50±0.5
TP VA 111.70 4.50
0.50±0.5

1 V LED- 21 B0
TP AA 109.00 6.15
2 V LED+ 22 B1
2.65
2.85
3.42
TFT AA 108.0 6.30
4.3±0.5 3 GND 23 B2
4 V DD 24 B3
5 R0 25 B4
800RGB X 480 6 R1 26 B5
7 R2 27 B6
TFT Outline 75.8±0.5
TP Outline 74.80±0.2

8 R3 28 B7
TP VA 65.91
TP AA 65.51
TFT AA 64.8

9 R4 29 GND
10 R5 30 CLK
11 R6 31 DISP
12 R7 32 H Sync
13 G0 33 V Sync
14 G1 34 DE
15 G2 35 NC
16 G3 36 GND
17 G4 37 XR
18 G5 38 YD

25.80
19 G6 39 XL
20 G7 40 YU
48.6±0.5

K A
26.3±0.5 1.65 Max
COMPONENT HEIGHT

Contact side Stiffener side

22.80
3.5

0.135
0.045
1 40 0.30±0.05
0.35
0.135

P0.5*39=19.5 R G B The non-specified tolerance of dimension is 0.3mm.

WF50BTIAGDNT0# 第 4 頁，共 4 頁