NAME: ________________________________ o Conduct Testing on connectivity between Client and Server using

SCHOOL:______________________________ PING
_
Qualification Title: Computer Systems Servicing NCII
COC 3 – SET-UP COMPUTER SERVER
Specifics Instruction for the Students
 Configure and Perform Testing of Network Services
1. Given the necessary components, Testing Instruments, tools and equipment’s, are o Install Active Directory Services based on the above IP Address with
you required to perform the following task in 4 hours: Domain Name: your first name.com
o Install Domain Host Protocol (DHCP)
COC1 – INSTALL AND CONFIGURE COMPUTER SYSTEMS o Install Domain Name Services (DNS)
 Configure Computer System  Update Forward Lookup zone
o Remove all parts on computer units  Install new zone in Reverse lookup zone and use new
o Assemble the parts and conduct Testing resource record for host IP Address and Host name
o Set boot sequence into bios o Install File Services
 Install Operating and Application Software o Configure Folder Redirection, Under the User Configuration select
o Prepare and create bootable installer using flash drive Desktop, Documents, Videos and Favorite’s
o Create partition hard drive (C: 70%, D:30% ) and install operating o Configure Drive Mapping
system o Create two (2) Users Account: Student’s Name and Trainer’s Name
o Set the Server Password to CSS@2024 o Conduct Testing and Perform file and printer sharing as follows
o Install appropriate driver  Install and share printer to server and add printer to client
o Install application software  Provide sample document in notepad using your date:
Name, Address, Contact No. and Company/Institution
COC 2 – SET –UP COMPUTER NETWORKS
COC 4 – MAINTAINVAND REPAIRS COMPUTER SYSTEMS AND NETWORKS
 Install Network Cables
o Design and draw network layout using the computer network services  Repair and Computer System and Networks
(Draw at the Back) o Plan and prepared for maintenance service using the Maintenance
o Create and connect T568-B cable using your designed network layout. Service Form
o Conduct testing on connectivity of wires/cables o Identify fault/defect and possible causes of defect in computer
 Configure Computer Network system and networks
o Configure the router’s IP Address Using Class ____ o Perform repair/replace of the defective parts/components
o Set Up the router’s Service Set Identifier (SSID) using the Student’s o Perform Testing of computer systems and network
FIRST NAME _ROUTER and set password to CSS@2024 o Fill out the Maintenance Service Form
o Set Up the WAP’s Service Set Identifier (SSID) using the Student’s o Create backup or system image of Users Folder
FIRST NAME_WAP and set password to CSS@2024 o Restore /Recover back up or system image of User Folder
o Conduct Testing on routers SSID and WAP’s SSID Connection
o Set up Network sharing and Firewall
 Set up User Access
o Assign Workgroup name to CSSJDVP
o Assign computer name of Client1 using your Client1
o Assign computer name of Client2 using your Client1
o Assign computer name of Server using your Server
o Use Class A static IP address on SERVER and Dynamic IP Address on
client
 Date & Time ______________ _____________

MAINTENANCE SERVICE FORM

1. Checklist Design And Draw Network Layout Using The Computer Network Services

Tools and Equipment Testing Condition

Remarks
Devices Good Bad
Screwdriver (Philips)
Mechanical Pliers
Multi-tester
LAN Tester
Anti-static Devices
Crimping Tool
Router
Wireless Access Point
Moduar Box
Patch Pannel
Uninterruptable Power Supply
(UPS)
Desktop Computer
Laptop

2. Diagnosis
Identified Causes/Symptoms:
_______________________________________________________________
__________________________________________________________

Actual Stage/ Components

_______________________________________________________________
___________________________________________________________

Rectification
_______________________________________________________________
___________________________________________________________

Remarks
_______________________________________________________________
___________________________________________________________

3. Maintenance – Created Back Up