C Series

1W
DC-HVDC CONVERTER

The C Series is a line of miniature, regulated high voltage power supplies. Each model is
programmed from 0 to 100% of rated output via a 0 to +5 volt, DAC-compatible, high-
impedance programming input voltage. An externally accessible potentiometer provides
adjustable gain trim, allowing for individual calibration of units.

These converters exhibit very low ripple, noise, and EMI/RFI by utilizing a quasi-sinewave
oscillator, shielded transformer, excellent filtering techniques and an isolated steel enclosure
featuring a separate grounding pin. A proprietary encapsulation process and a custom UL 94
V-0 listed, high-performance formula are used to achieve excellent high voltage and thermal
properties. Temperature drift is typically less than 50ppm/°C.

Typical Applications

Features
• Photo Multiplier Tube
• Solid State Detectors
• +12VDC input (11.5 to 16V)
• Electrophoresis
• Voltage regulated • Piezo Devices
• Output voltages from 100V to 8000V • Capacitor Charging
• EO Lenses
• 0 to 100% programmable output

• High reliability 2.6MHrs MTBF

• <50ppm/°C temperature coefficient Dimensions

• Shielded case for low EMI

• Low ripple - down to 0.002% C01 - C20:

• 3 year warranty 35.6 x 28.2 x 12.7mm (1.40" x 1.11" x 0.50")

C25 - C40:
44.4 x 28.2 x 12.7mm (1.75" x 1.11" x 0.50")

C50 - C60:
53.3 x 28.2 x 12.7mm (2.10" x 1.11" x 0.50")

C80:
63.50 x 31.75 x 15.24mm (2.50" x 1.25" x 0.60")
C Series DC-HVDC CONVERTER

Models & Ratings

Regulation
Model Number Output Voltage Output Current Ripple Frequency
Load Line

C01 0 to +100V 10.0mA <0.1% <0.1% <0.75% 200-250kHz

C02 0 to +200V 5.0mA <0.1% <0.1% <0.05% 250-350kHz
C02N 0 to -200V 5.0mA <0.1% <1.0% <0.05% 75-150kHz
C03 0 to +300V 3.3mA <0.1% <0.1% <0.03% 200-300kHz
C05 0 to +500V 2.0mA <0.07% <0.1% <0.004% 250-350kHz
C05N 0 to -500V 2.0mA <0.5% <0.5% <0.005% 200-350kHz
C06 0 to +600V 1.67mA <0.1% <0.1% <0.003% 250-300kHz
C06N 0 to -600V 1.67mA <0.75% <0.75% <0.003% 125-300kHz
C10 0 to +1000V 1.0mA <0.3% <0.3% <0.005% 200-250kHz
C10N 0 to -1000V 1.0mA <0.5% <0.3% <0.002% 100-125kHz
C12 0 to +1250V 1.0mA <0.1% <0.1% <0.004% 200-250kHz
C12N 0 to -1250V 1.0mA <0.175% <0.1% <0.003% 100-125kHz
C15 0 to +1500V 0.67mA <0.1% <0.1% <0.002% 100-125kHz
C15N 0 to -1500V 0.67mA <0.2% <0.2% <0.002% 75-100kHz
C20 0 to +2000V 0.5mA <0.15% <0.1% <0.002% 75-100kHz
C20N 0 to -2000V 0.5mA <0.15% <0.1% <0.002% 75-100kHz
C25 0 to +2500V 0.4mA <0.03% <0.2% <0.1% 125-150kHz
C30 0 to +3000V 0.33mA <0.03% <0.05% <0.1% 75-100kHz
C30N 0 to -3000V 0.33mA <0.03% <0.075% <0.2% 75-100kHz
C40 0 to +4000V 0.25mA <0.25% <0.2% <0.1% 50-125kHz
C40N 0 to -4000V 0.25mA <0.2% <0.1% <0.1% 75-150kHz
C50 0 to +5000V 0.2mA <0.35% <0.1% <0.1% 75-150kHz
C50N 0 to -5000V 0.2mA <0.25% <0.1% <0.1% 125-175kHz
C60 0 to +6000V 0.167mA <0.25% <0.1% <0.1% 125-175kHz
C60N 0 to -6000V 0.167mA <0.25% <0.15% <0.1% 125-175kHz
C80 0 to +8000V 0.125mA <0.75% <0.15% <0.2% 100-150kHz
C80N 0 to -8000V 0.125mA <0.75% <0.25% <0.2% 100-150kHz

Notes:
Other voltages available on request - please contact our dedicated support team: xppower.com/contact

2
C Series DC-HVDC CONVERTER

Input

Characteristic Minimum Typical Maximum Units Notes & Conditions

Input Voltage Range 11.5 13.75 16 VDC Works with nominal 12V or 15V supply

Input Current, Full Load 250 mA

Input Current, No Load 100 mA

Programming Inputs 0 5 VDC Analog DC Voltage Controls Output 0 to 100%

Input Capacitance 440 μA Low ESR

Output

Characteristic Minimum Typical Maximum Units Notes & Conditions

Output Voltage 8000 VDC See Models & Ratings table

Output Current 10 mA See Models & Ratings table

Output Voltage programmable via Analog DC Programming Voltage

Output Programming 0 100 %
Input

Setpoint Accuracy ±1 % @ Max Vpgm, No Load

Gain Adjust ±5 % Potentiometer, see Signals & Controls

Linearity: Output vs Program ±1 % 15 to 100% Output

Minimum Load No minimum load required

Start Up Response 250 msec At Max Vout, Full Load

Line Regulation 0.05 1.0 % 100% Vpgm, Full Load, (Min to Max Input)

Load Regulation 0.07 0.75 % 100% Vpgm, 13.75Vin, (NL to FL)

Ripple and Noise 0.002 0.75 % 1MHz bandwidth, see Models & Ratings table

Temperature Coefficient 50 ppm/°C

Stability 100 ppm/hr After 30 minute warm up

General

Characteristic Minimum Typical Maximum Units Notes & Conditions

Isolation: Input to Output N/A - Input Ground is connected to Output Ground

Switching Frequency 50 350 kHz

Construction Case material is zinc plated steel. Solid vacuum encapsulation, UL 94 V-0 rated

Mean Time Between Failure 2.6 Mhrs Per Bellcore TR 332

Notes:

1. Maximum current is available at maximum output voltage. 5. GAIN ADJUST refers to the ability to alter the gain of the circuit to allow for
2. Specifications after 1 hour warm-up, full load, 25°C, unless otherwise noted. set-point accuracy error.
3. Proper thermal management techniques are required to maintain safe case 6. LINEARITY refers to how much the transfer function can deviate from a straight
temperature. line in the absence of any set-point error.
4. SET POINT ACCURACY refers to the ability of the unit to accurately deliver the
programmed voltage.

Specifications subject to change without notice. 3

C Series DC-HVDC CONVERTER

Environmental

Characteristic Minimum Typical Maximum Units Notes & Conditions

Operating Temperature -10 +60 °C Case temperature

Storage Temperature -20 +90 °C

Cooling Natural convection

Humidity 95 %RH Non-condensing

Thermal Shock Limit 1 °C/10sec Natural convection

Safety Approvals

Safety Agency Standard Notes & Conditions

UL IEC/UL/CSA/EN 62368

CE Meets all applicable directives

RoHS RoHS 2 and 3 Directive (2011/65/EU) Where applicable

Application Notes

4
 E
5 places
4 3 6.35
2.29 (0.250)
(0.09)

C Series
0 2.54
1
5 (0.100)
12.70 2
DC-HVDC CONVERTER
(0.50) 12.7 (0.500)
16.51 (0.65)

11.43
(0.45)
0
Mechanical Details
5.08 (0.20)

(0.700)
17.78
PC PINS
0.79 (0.031) DIA RECOMMENDED
C01-C20
5 places RECOMMENDED ø 4.75 (0.187) MIN
PCB LAYOUT
For pot access
PCB LAYOUT TOP VIEW
Top View Bottom View 35.56 (1.40) TOP VIEW PCB Layout
35.56 (1.40)

2.54 (0.100)

8.89 (0.350)
16.51 (0.65)

8.64 (0.34)
Recommended

2.54 (0.100)

8.89 (0.350)
8.64 (0.34)
12.7 (0.500) hole and pad size
VOLTAGE
HIGH 28.19 GAIN 2 Recommended
ADJUST
hole and pad size2.54 (0.100) Ø 1.32 (0.052) and
VOLTAGE

28.19 (1.11) 5
RECOMMENDED
Ø 2.08 (0.082)
HIGH

Ø
1 1.32 (0.052) and
(1.11) 0 5 places
Ø 2.08 (0.082) 2.29 (0.09)
44.45 (1.75)
5 places PCB LAYOUT 4 3 6.35
4 3 6.354(0.250) 3 2.29
6.35 (0.250)
TOP VIEW
2.29 (0.09)
(0.250) 0
1 2.54
(0.09) 0 5 (0.100)
1 2.54
12.70

8.89 (0.350)
8.13 (0.32)
17.78 (0.700)
VOLTAGE

5 2

17.78 3.81 (0.150)

Pin Function (0.100)

11.43 (0.350)
12.7 (0.500)
2.54 (0.100)
(0.50) 28.19

(1.000)
HIGH

12.70
8.64 (0.34)

11.43
(0.45)
25.4
0
(1.11) 2

0
(0.50) 12.7 (0.500) 16.51 (0.65)
1Recommended

11.43
(0.45)
Input (+)
hole and pad size 16.51 (0.65)

11.43
(0.45)
Ground
2Ø 1.32 (0.052) and

0
5.08 (0.20)

(0.700)
11.43
(0.45)
PC PINS Ø 2.08 (0.082)

0
5.08 (0.20) Programming Voltage
35 places

(0.700)
0.79 (0.031) DIA

17.78
PC PINS
0.79 (0.031) DIA 5 places 4 HV Out 3 ø 4.75 (0.187) MIN
4
12.70 ø 4.75 (0.187) MIN 6.35
For pot (0.250)
access
5 places 5 2.54Case
(0.10)Ground
(0.50) For pot access 0
1
5 2.54 (0.100)
2
12.70 (0.500)
C25-C40 5.08 (0.20)
PC PINS 16.51 (0.65) RECOMMENDED 16.51 (0.65)
16.51 (0.65)
0.79 (0.031) DIA
5 places 2
44.45 (1.75) 12.7 (0.500) PCB LAYOUT
GAIN
TOP VIEW
Top View GAIN 2
12.7 Bottom
(0.500) RECOMMENDED
ADJUSTView
2.54 (0.100) PCB Layoutø 4.75 (0.187) MIN
5 For pot access
ADJUST 1
44.45 (1.75) 5
2.54 (0.100) PCB LAYOUT 0

8.89 (0.350)
1

8.13 (0.32)
2.29 (0.09)
VOLTAGE

3.81 (0.150)
0 28.19
3 TOP VIEW

(1.000)
HIGH

16.51 (0.65)

11.43
(0.45)
4

25.4
2.29 (0.09)
(1.11) 6.35 (0.250)

0
4 Recommended
3 6.35 (0.250)GAIN 12.70 (0.500)
2 hole and pad size
8.89 (0.350)
8.13 (0.32)
VOLTAGE

3.81 (0.150)

ADJUST
2.54 (0.100) Ø 1.32 (0.052) and
28.19
11.43(1.000)

5
HIGH

17.78 (0.700)

11.43
(0.45)
25.4

1 Ø 2.08 (0.082)
11.43 (0.350)
2.54 (0.100)

(1.11)
0

0
8.64 (0.34)

Recommended 5 places
17.78 (0.700)

0
11.43 (0.350)

2.54 (0.10)
2.54 (0.100)

hole and pad size

(0.45)
8.64 (0.34)

Ø 41.32 (0.052)3 and 6.35 (0.250) 4 3

12.70 6.35 (0.250)
11.43
(0.45)

(0.50) Ø 2.08 (0.082) 2.54 (0.10)

5 places 0
1
5 2.54 (0.100)
4 3
12.70 Pin Function
6.35 (0.250) 2
3.81 (0.150)

8.89 (0.350)
25.4 (1.000)

2.54 (0.10) 12.70 (0.500)

11.43
(0.45)
8.13 (0.32)

(0.50) 5.08 (0.20)

PC PINS 11 Input (+)0 16.51 (0.65)
0

0.79 (0.031) DIA 5 2.54 (0.100)

5 places 22 Ground
12.70 (0.500) ø 4.75 (0.187) MIN
5.08 (0.20) 3 Programming Voltage
PC PINS 16.51 (0.65) For pot access
0.79 (0.031) DIA
5 places 4 HV Out
ø 4.75 (0.187)
5 16.51Ground
MINCase (0.65)
For pot access 12.70 (0.500)
GAIN 2
ADJUST
2.54 (0.100)
16.51 (0.65) 5
1
0
12.70 (0.500) 2.54 (0.10)
GAIN 2
ADJUST
2.54 (0.100) 4 3 6.35 (0.250)
5
1
0
2.54 (0.10)
4 3 6.35 (0.250)
3.81 (0.150)

8.89 (0.350)
25.4 (1.000)

11.43
(0.45)
8.13 (0.32)

0
3.81 (0.150)

8.89 (0.350)
25.4 (1.000)

11.43
(0.45)
8.13 (0.32)

Notes:
1. All dimensions are in mm (inches). All grounds internally connected except case. Case ground (Pin 5) must be
2. Weight: C01-C20: 31g (1.1oz); C25-C40: 36.8g (1.3oz). connected to ground, with no more than 50V between case ground (Pin 5) and
3. Tolerance: X.XX±0.51 (0.02). circuit ground (Pin 2).
4. Pin Tolerance: ± 0.127 (0.005).

Specifications subject to change without notice. 5

 C Series DC-HVDC CONVERTER

Mechanical Details
RECOMMENDED
C50-C60
66.04 (2.60) PCB LAYOUT
59.69 (2.350) RECOMMENDED
TOP VIEW
Top View5.08 (0.20) RECOMMENDED
PCB Layout
66.04 (2.60)
3.18 (0.13) PCB LAYOUT
66.04 (2.60) ø 2.64 (0.104) PCB LAYOUT

12.70 (0.500)
21.59 (0.850)
8.89 (0.350)
59.69 (2.350) TOP VIEW

(1.150)
#2/M2 clearance

4.57 (0.18)
5.08 (0.20)

30.48 (1.200)
5.08 (0.20)
59.69 (2.350)
3.18 (0.13) for mounng, 2 places TOP VIEW
ø 2.64 (0.104)
VOLTAGE

0
3.18 (0.13)

(0.500)
(0.850)
(0.350)
ø 2.64 (0.104)
HIGH

29.21
(1.150)
(0.500)
(0.850)
(0.350)
7.62 (0.30) #2/M2 clearance

(0.18)
28.19

(1.200)

(1.150)
#2/M2 clearance

(0.18)
for mounng, 2 places

(1.200)
(1.11) 14.10 (0.55)
VOLTAGE

12.70
0 0
for mounng, 2 places

21.59
8.89
6.35 0.250()

4.57
HIGH
VOLTAGE

29.21
12.70
21.59
8.89
7.62 (0.30) 3

4.57
30.48
28.19
HIGH

29.21
7.62 (0.30) 2.54 (0.10)

30.48
28.19
(1.11) 4
14.10 (0.55) 0
(1.11) 254.0 ±25.4 14.1012.70
(0.55)(0.50) 1
3 6.35 0.250()
53.34 (2.10) 5 2.54
6.35(0.100)
0.250()
(10.00 ±1.00) 3 2.54 (0.10)
(HV OUTPUT LEAD) 4 2 2.54 (0.10)
0.64 4 1 12.70 0
(0.500)
254.0 ±25.4 12.70 (0.50) 02.54
254.0 ±1.00)
±25.4 53.34 (2.10) (0.025)
12.70 (0.50) 1 5 16.51 (0.100)
(0.65)
7.62 (0.30) (10.00 53.34 (2.10) 5 2.54 (0.100)
(10.00
(HV OUTPUT±1.00)
LEAD) 2
0.64 12.70 (0.500)
5.08 (0.20)
(HV OUTPUT LEAD) ø 4.75 (0.187) MIN Recommended
2
12.70 (0.500)
0.64
(0.025)
7.62 (0.30) For pot access hole and pad size 16.51 (0.65)
(0.025)
7.62 (0.30) 5X ø 1.02 (0.040) ø 1.32 (0.052) and 16.51 (0.65)
5.08 (0.20) P.C. PIN ø 4.75 (0.187) MIN Recommended
ø 2.29 (0.090)
5.08 (0.20) ø 4.75
For pot (0.187)
access MIN Recommended
hole
5 PLACES and pad size
5X ø 1.02 (0.040) For pot access øhole
1.32and pad and
(0.052) size
5X øP.C.
1.02 (0.040)
PIN ø 2.29
1.32 (0.090)
(0.052) and
P.C. PIN ø PLACES
5 2.29 (0.090)
5 PLACES

GAIN
12.70 (0.500)
HV OUTPUT LEAD 2
Bottom(#22AWG
View 20KV ADJUST
2.54 (0.100)
SILICONE) 5

HV OUTPUT LEAD 4 GAIN

1
2 0 12.70 (0.500)
ADJUST
GAIN
12.70
2.54 (0.500)
(0.10) Pin Function
(#22AWG
HV OUTPUT 20KV
LEAD 2
SILICONE)
(#22AWG 20KV ADJUST
3 5 2.54 (0.100)
SILICONE) 1 5 6.35 (0.250)
2.54 (0.100)
4 0 1 Input (+)
1 0 2.54 (0.10)
4
3 2.54 (0.10) 2 Ground
30.48 (1.20)

6.35 (0.250)
12.7 (0.500)
21.59 (0.850)

3
29.21 (1.15)

6.35 (0.250)
0 04.57 (0.18)
8.89 (0.350)

3 Programming Voltage
0
(1.20)

4 HV Return
(0.500)
(0.850)

(1.15)
(1.20)

(0.18)
(0.350)
(0.500)
(0.850)

(1.15)
(0.18)

5 Case Ground
(0.350)
30.48

29.21
30.48

4.57

12.7
21.59

LEAD HV Out
8.89

29.21
4.57

12.7
21.59
8.89

Notes:
1. All dimensions are in mm (inches). All grounds internally connected except case. Case ground (Pin 5) must be
2. Weight: C50-C60: 51g (1.8oz). connected to ground, with no more than 50V between case ground (Pin 5) and
3. Tolerance: X.XX±0.51 (0.02). circuit ground (Pin 2).
4. Pin Tolerance: ±0.127 (0.005).

6
 C Series DC-HVDC CONVERTER

Mechanical Details

C80 76.20 (3.00)

ø 2.64 (0.104)
69.85 (2.750) #2/M2 CLEARANCE
Top View FOR MOUNTING PCB Layout
3.18 (0.13) 2 PLACES
6.35 (0.25)

12.70 (0.500)
8.89 (0.350)

21.59 (0.850)

29.21 (1.150)
76.20 (3.00)

40.64 (1.600)

4.57 (0.18)
76.20 (3.00) ø 2.64 (0.104)
VOLTAGE

69.85 (2.750) 31.75

ø 2.64
#2/M2 CLEARANCE

0
(0.104)
HIGH

7.62 (0.30) 69.85 (2.750) (1.25)

FOR
#2/M2 MOUNTING
CLEARANCE
3.18 (0.13) FOR2 MOUNTING
PLACES
6.35 (0.25)

(0.500)
3.18 (0.13) 15.88 (0.63) 2 PLACES

(0.350)

(0.850)

(1.150)
6.35 (0.25)

(0.500)
(0.350)

(0.850)
(1.600)

(1.150)
6.35 (0.250)

(0.18)
3

12.70
(1.600)

(0.18)
VOLTAGE

8.89
31.75

21.59
0 0
2.54 (0.10)

29.21
4

12.70
HIGH

0 1
VOLTAGE

(1.25)

8.89
31.75

4.57

21.59
40.64
7.62 ±25.4
(0.30)

29.21
254.0 2.54 (0.10)
HIGH

63.50 (2.50) (1.25) 5

4.57
40.64
(10.00
7.62 ±1.00)
(0.30)
(HV OUTPUT LEAD) 15.88 (0.63) 2
12.70 (0.500)
15.88 (0.63)
0.64 3 6.35 (0.250)
15.24 (0.60) 5.84 (0.73)
8.89 (0.35) (0.025) 3 6.35 (0.250)
4 2.54 (0.10)
0 1
254.0 ±25.4
5.08 (0.20) 4.75 (0.187) MIN 4 Recommended 2.54 2.54(0.10)
(0.10)
63.50 (2.50) 0 1
(10.00
254.0 ±1.00)
±25.4 For pot access Hole5& Pad Size 2.54 (0.10)
63.50 (2.50) 5 (0.052) and
2 ø 1.32
(10.00 ±1.00) 5X ø 1.02 (0.040)
(HV OUTPUT LEAD)
12.70 (0.500)
(HV OUTPUT LEAD)
0.64 2 ø 2.29 (0.090)
15.24 (0.60) 12.70
5.84(0.500)
(0.73)
(0.025) 5 PLACES
8.89 (0.35) 0.64
15.24 (0.60) 5.84 (0.73)
8.89 (0.35) (0.025)
5.08 (0.20) 4.75 (0.187) MIN Recommended
5.08 (0.20) For4.75
pot (0.187)
access MIN Hole & Pad Size
Recommended
5X ø 1.02 (0.040) ø 1.32
Hole (0.052)
& Pad Sizeand
GAIN For pot access
øø1.32
2.29(0.052)
(0.090)and
ADJUST ø 1.02
5XP.C. PIN (0.040)
ø5 2.29
PLACES
(0.090)
5 PLACES
HV OUTPUT LEAD 2
12.70 (0.500)
Bottom
(#22AWGView
20KV
SILICONE) 5
GAIN 2.54 (0.10)
0 GAIN 1 P.C. PIN Pin Function
ADJUST 4 2.54 (0.10)
ADJUST P.C. PIN
32 6.35 (0.250) 1 Input (+)
HV OUTPUT LEAD 12.70 (0.500)
HV (#22AWG 20KV
OUTPUT LEAD 2 2 Ground
12.70 (0.500)
SILICONE)
(#22AWG 20KV 5
40.64 (1.60)

2.54 (0.10)
4.57 (0.18)

5 3 Programming Voltage
29.21 (1.15)

SILICONE)
21.59 (0.850)

0 1
12.70 (0.500)

BOTTOM 2.54
2.54 (0.10)
(0.10)
8.89 (0.350)

4
0 1 4 HV Return
0

4 2.54 (0.10)
VIEW 3 6.35 (0.250)
3 6.35 (0.250) 5 Case Ground
LEAD HV Out
(1.60)

(0.18)

(1.15)
(0.850)
(1.60)

(0.500)

BOTTOM
(0.350)
(0.18)

(1.15)
(0.850)
(0.500)

BOTTOM
40.64

0 0

(0.350)

VIEW
4.57

29.21
40.64

21.59

VIEW
4.57

12.70

29.21
8.89

21.59
12.70
8.89

Notes:
1. All dimensions are in mm (inches). All grounds internally connected except case. Case ground (Pin 5) must be
2. Weight: C80: 57g (2.0oz). connected to ground, with no more than 50V between case ground (Pin 5) and
3. Tolerance: X.XX±0.51 (0.02). circuit ground (Pin 2).
4. Pin Tolerance: ± 0.127 (0.005).

Specifications subject to change without notice. 7

C Series DC-HVDC CONVERTER

Mounting Kit
MTG HARDWARE
TOP VIEW SUPPLIED

CM3 fits models C25-C40 127.00 (5.00) 15S SUB-MIN 'D'

RECEPTACLE
AMP # 747909-2

8 15

45.72 SOLDER
(1.80) CUP SIDE
1 9

SHV
MATING
CONNECTOR

15P SUB MIN-D

PLUG (MALE)
AMP # 747841-4
33.78
(1.33)

22.86 (0.90)
12.7
(0.50)

97.28 (3.83)

SHV 1.27 (0.05)

59.18 THICK
OUTPUT
(2.33)
CONNECTOR

20.83 (0.82)

33.02
(1.300) 33.32
GAIN (1.312)
ADJUST

6.35 (0.25)

55.88 (2.200)

#4-40 MTG HOLE ANODIZED

4 PLACES ALUMINUM
MOUNTING PLATE

Block Diagram

Notes:
Dimensions are in mm (inches)
Dimensional tolerances: .xx ± 0.51 (0.02), .xxx ± 0.127 (0.005)

Product Description

These adapters provide convenient prototyping and evaluation during system development and integration. They allow C Series modules to be mounted to a chassis instead of
designed into a PC board. Extra filtering on the input and output improves performance. A schottky diode on the input provides reverse polarity protection. Input connector is
via a 15P SUB MIN-D plug (mate supplied) and output is via an SHV style coaxial connector (mate supplied). Please note when ordering a CM3 the C Series is not included and
must be ordered separately.

Programming Instructions

Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn potentiometer to adjust high voltage.
Or Remote Potentiometer: connect wiper arm to pin 3, other sides to pins 4 and 2.
Or Remote Analog Signal: apply programming voltage to pin 3, return to pin 2.

Specifications subject to change without notice. 8

C Series DC-HVDC CONVERTER

Mounting Kit
TOP VIEW MTG HARDWARE
SUPPLIED
CM4 fits models C50-C80 171.96 (6.77) 15S SUB-MIN 'D'
RECEPTACLE
AMP # 747909-2

8 15

45.72 SOLDER

VOLTAGE
(1.80) CUP SIDE

HIGH
1 9
LGH
MATING
CONNECTOR

15P SUB MIN-D

PLUG (MALE)
35.56 (1.40) AMP # 747841-4

19.05 (0.75) 12.7

(0.50)

133.35 (5.25)

1.27 (0.05)
LGH THICK
OUTPUT 3.80 (96.52)
CONNECTOR

21.59
(0.85)
33.32 33.32
(1.312) (1.312)
GAIN
ADJUST

6.09 (0.24)

33.02
93.98 (3.700)
(1.30)

#4-40 MTG HOLE

4 PLACES ANODIZED
ALUMINUM
MOUNTING PLATE

Block Diagram

Notes:
Dimensions are in mm (inches) Dimensional tolerances: .xx ±0.51 (0.02)
.xxx ±0.127 (0.005)

Product Description

These adapters provide convenient prototyping and evaluation during system development and integration. They allow C Series modules to be mounted to a chassis instead of
designed into a PC board. Extra filtering on the input and output improves performance. A schottky diode on the input provides reverse polarity protection. Input connector is
via a 15P SUB MIN-D plug (mate supplied) and output is via an SHV style coaxial connector (mate supplied).Please note when ordering a CM3 the C Series is not included and
must be ordered separately.

Programming Instructions

Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn potentiometer to adjust high voltage.
Or Remote Potentiometer: connect wiper arm to pin 3, other sides to pins 4 and 2.
Or Remote Analog Signal: apply programming voltage to pin 3, return to pin 2.

10 Jan 2024 9