Scribd
Upload
5 views1 page

Friction_D%20Section

The document provides power ratings in kilowatts for 32x19 mm (D) section belts at various rev/min of the faster shaft and pulley datum diameters. It includes additional power requirements per belt for different speed ratios. The last revision date of the document is May 9, 2007.

Uploaded by

Jesus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views1 page

Friction_D%20Section

The document provides power ratings in kilowatts for 32x19 mm (D) section belts at various rev/min of the faster shaft and pulley datum diameters. It includes additional power requirements per belt for different speed ratios. The last revision date of the document is May 9, 2007.

Uploaded by

Jesus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Non Standard Power Ratings - 32x19 mm (D) Section Belts

Rev/min POWER RATING IN KILOWATTS (kW) FOR PULLEY DATUM DIAMETERS (mm)
of faster
shaft 355 375 400 425 450 475 500 530 560 630 710 800 1000
720 19,67 21,60 23,95 26,26 28,50 30,68 32,81 35,27 37,64 42,77 47,93 52,75 -
960 23,50 25,77 28,50 31,11 33,60 35,96 38,20 40,69 42,99 47,49 - - -
1440 26,82 29,09 31,63 - - - - - - - - - -

100 3,96 4,31 4,76 5,20 5,64 6,07 6,51 7,03 7,54 8,73 10,08 11,58 14,84
200 7,15 7,82 8,65 9,47 10,29 11,10 11,91 12,87 13,83 16,04 18,52 21,25 27,15
300 10,02 10,98 12,16 13,34 14,50 15,66 16,81 18,17 19,52 22,62 26,08 29,86 37,81
400 12,65 13,87 15,39 16,89 18,37 19,84 21,29 23,01 24,70 28,57 32,82 37,39 46,68
500 15,07 16,54 18,35 20,14 21,91 23,65 25,36 27,38 29,37 33,84 38,68 43,74 53,44
600 17,28 18,98 21,06 23,11 25,12 27,09 29,02 31,28 33,48 33,38 43,55 48,76 57,77
700 19,29 21,18 23,50 25,76 27,97 30,13 32,22 34,66 37,01 42,13 47,32 52,25 -
800 21,09 23,15 25,66 28,10 30,46 32,74 34,95 37,48 39,88 44,99 49,87 - -
900 22,67 24,87 27,53 30,09 32,55 34,90 37,15 39,68 42,05 46,87 - - -
1000 24,01 26,31 29,08 31,71 34,21 36,57 38,78 41,23 43,45 - - - -
1100 25,11 27,48 30,30 32,94 35,42 37,71 39,80 42,06 - - - - -
1200 25,95 28,35 31,16 33,76 36,13 38,27 40,17 - - - - - -
1300 26,52 28,89 31,64 34,12 36,32 - - - - - - - -
1400 26,79 29,11 31,72 34,00 - - - - - - - - -
1500 26,76 28,96 31,37 - - - - - - - - - -
1600 26,40 28,44 - - - - - - - - - - -

ADDITIONAL POWER (kW) PER BELT FOR SPEED RATIO OF


Rev/min
of faster 1,00 1,02 1,05 1,09 1,13 1,19 1,25 1,35 1,52 2,00
shaft to to to to to to to to to and
1,01 1,04 1,08 1,12 1,18 1,24 1,34 1,51 1,99 over
720 0,00 0,20 0,46 0,75 0,99 1,27 1,46 1,69 1,90 2,11
960 0,00 0,27 0,62 1,01 1,32 1,69 1,95 2,25 2,54 2,81
1440 0,00 0,40 0,93 1,51 1,98 2,52 2,92 3,39 3,81 4,22

100 0,00 0,03 0,07 0,10 0,13 0,18 0,20 0,23 0,26 0,29
200 0,00 0,05 0,13 0,21 0,28 0,35 0,40 0,47 0,53 0,59
300 0,00 0,08 0,19 0,31 0,41 0,53 0,61 0,70 0,79 0,88
400 0,00 0,11 0,26 0,42 0,55 0,70 0,81 0,94 1,06 1,17
500 0,00 0,14 0,32 0,52 0,69 0,88 1,01 1,17 1,32 1,46
600 0,00 0,16 0,39 0,63 0,83 1,05 1,22 1,41 1,59 1,76
700 0,00 0,19 0,45 0,73 0,96 1,23 1,42 1,64 1,85 2,05
800 0,00 0,22 0,51 0,84 1,10 1,40 1,63 1,88 2,12 2,34
900 0,00 0,25 0,58 0,95 1,24 1,58 1,83 2,11 2,38 2,63
1000 0,00 0,28 0,64 1,05 1,38 1,75 2,03 2,35 2,65 2,93
1100 0,00 0,31 0,71 1,16 1,51 1,93 2,24 2,58 2,91 3,22
1200 0,00 0,34 0,78 1,26 1,65 2,10 2,44 2,82 3,18 3,51
1300 0,00 0,37 0,84 1,37 1,79 2,28 2,64 3,05 3,44 3,81
1400 0,00 0,39 0,90 1,47 1,92 2,45 2,84 3,29 3,71 4,10
1500 0,00 0,42 0,97 1,57 2,07 2,63 3,05 3,52 3,97 4,39
1600 0,00 0,45 1,03 1,68 2,20 2,80 3,25 3,76 4,24 4,68

Last Revised: 09.05.2007 1 (1)

You might also like