CAT. No.

CBB318E-1

For Oil Feed/Water Feed

Improved Visibility Easy Operation User-Intuitive

Extensive Output Capability Replaceable Battery
 Dirt-resistant Display & Safer Switch Placement
By placing the switches on the back of the display:
• Display size is maximized
• Prevent erroneous operation from accidentally touching
the switches
• Switch operation can be done without touching the front
display: the display will be kept clean
• Highly durable against oil with the back material made of
glass reinforced resin

User-Friendly Front Cover Structure

The front cover latches on the indentation on the body
• Unlike hinges, the front cover can be fixed at desired position (top or bottom)
• Prevent losing or dropping the cover during battery replacement

Easy Battery Replacement

Battery replacement made easy without the need to remove the meter from the pipe.

Remove the front cover. Lift the circuit board. Replace the battery.
 Battery Icon Alarm Icons (up to 2) Information Icon
• Normally off • Normally off • Displays when the current mode is different
• Displays when the battery is low to • Displays when instant flow rate meets alarm conditions from the normal measurement mode
suggest battery replacement (Up to 2 alarm conditions can be configured) • Easy to confirm the current operating mode

Flow Rate Display

• Easy-to-read large display (8-digit) of one of the
following values (Displayed value can be swithed by
Flow Rate Unit Display mode switch operation).
• Easy-to-read large display (16-segment, 3-digit) (1) Accumulated total
• Capable of displaying various units (2) Instantaneous flow rate (per hour)
(L, kL, m3, ft3, g, kg, t, lb, etc.) (3) Instantaneous flow rate (per minute)
• Unit of time added while displaying instantaneous (4) Resettable total
flow rate ([/min], [/h])

Flow Indicator (10-segment)

• Bar length changes based on instantaneous flow rate (%)
• Allows user to intuitively check flow rate from a distance

Adjustable Register Angle

Register angle is adjustable over a 150° range
• Display angle can be adjusted to easy-to-read position regardless of installation location
• Easy to re-adjust the display angle even after changing installation orientation or location

Extensive Output Capability and Reinforced Protection

Improved electronic circuit while maintaining the reasonable price
• 4 kinds of output specifications available:
pulse output, analog output, alarm output, and
analog+pulse/alarm output
• "Overcurrent prevention circuit" added to
power/output circuit protects the meter from current
overload due to erroneous wiring Wiring
ERROR

Complete Compatibility with the Previous Model

Retrofitting the new electronics unit on an existing FLOWPET is easy without the need to remove the meter from the pipe.

Dismount the previous register. Mount the new register.

 FLOWPET-5G

GENERAL SPECIFICATIONS
Item Description
LCD display 7-segment, 8-digit with 14mm characters, unit display, low battery alarm, and flow indicator (10-segment)
Lithium battery or external power source
Power source • Lithium battery: 3.6V dedicated battery pack, Battery life: 8 years (varies with operating conditions), Storage life: 10 years
• External power source: 12 to 50VDC±10% (Pulse output: Current capacity 10mA or more, Analog output: Current capacity 30mA or more
Display item Total flow, instantaneous flow rate ([/h] or [/min]), and resettable total flow

Output signal Open collector, Allowable current: 20mA, Max. voltage applied: 30V
Analog output
(for model with a Factored pulse Unfactored pulse
pulse generator)
Pulse width: 1ms, 50ms, 100ms, 250ms Pulse width: 2ms (fixed) 4 to 20mA
Temperature range Fluid temperature: 0 to +120℃ (High temperature service: 0 to +150℃), Ambient temperature: -10 to +60℃
Max. operating pressure 1.18MPa (Flange rating: JIS 10K RF)
Accuracy Oil service: ±0.5% of RD Water service: ±1% of RD

FLOW RANGE
Flow Range for Oil Service
Nominal Flow Range, L/h Pressure Loss (kPa) at Max. Flow Rate
Model Size Kerosene Gas Oil (heavy oil A) Heavy oil Kerosene Heavy oil
mm (Above 0.8mPa•s to 2mPa•s) (Above 2mPa•s to 5mPa•s) (Above 5mPa•s to 200mPa•s) 1.2mPa•s 19mPa•s
A
LS4976-5 20 10 to 800 7 to 800 5 to 800 32 47
B
A
LS5076-5 20 150 to 1600 80 to 2000 50 to 2000 14 40
B
A
LS5276-5 25 300 to 3000 150 to 3800 80 to 3800 13 56
B
A
LS5376-5 40 600 to 5000 300 to 6400 150 to 6400 13 30
B
A
LS5576-5 40 1200 to 11000 600 to 14000 400 to 14000 25 54
B
A
LS5676-5 50 2000 to 20000 1400 to 24000 900 to 24000 27 55
B

OUTLINE DIMENSIONS A
B
82.5

L 75°
t

d . D
P.C
D H

75°
External output cable entry
Register orientation (1m long cable furnished)
adjustable in 15° steps (Covered with a blind plug for models without pulse generator)
(75° upward, 75° downward)

Nominal Size JIS 10K RF Flange Approx.

Model Flange Rating L A B H
d D t P.C.D n-φh Weight (kg)
A JIS 10K RF 150
LS4976-5 20 205.5 160.5 66 100 18 75 4-15 3.3
B ASME 150K RF 140
A JIS 10K RF 150
LS5076-5 20 210.5 165.5 66 100 18 75 4-15 4.3
B ASME 150K RF 140
A JIS 10K RF 225
LS5276-5 25 223.5 168.5 96 125 18 90 4-19 6.3
B ASME 150K RF 218
A JIS 10K RF 225
LS5376-5 40 237.5 179.5 96 140 20 105 4-19 7.8
B ASME 150K RF 221
A JIS 10K RF 230
LS5576-5 40 242.5 184.5 124 140 20 105 4-19 9.8
B ASME 150K RF 225
A JIS 10K RF 250
LS5676-5 50 260.5 188.5 146 155 20 120 4-19 14.6
B ASME 150K RF 258

The specification as of November, 2015 is stated in this catalog. Specifications and design are subject to change without notice.

3-10-8 Kamiochiai, Shinjuku-ku, Tokyo 161-8508

Phone: 81-3-3360-5121 FAX: 81-3-3365-8605
http://www.oval.co.jp/english

1511 (1607) 1511S