Scribd
Upload
27 views4 pages

manual-15226_(manymanuals.com)

This document provides assembly and operating instructions for the Tree Pruner model 09712, including specifications, safety warnings, and maintenance guidelines. It emphasizes the importance of following safety precautions while using the tool and outlines the assembly process for the saw blade. Additionally, it includes a parts list and contact information for technical support.

Uploaded by

pxs11637
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views4 pages

manual-15226_(manymanuals.com)

This document provides assembly and operating instructions for the Tree Pruner model 09712, including specifications, safety warnings, and maintenance guidelines. It emphasizes the importance of following safety precautions while using the tool and outlines the assembly process for the saw blade. Additionally, it includes a parts list and contact information for technical support.

Uploaded by

pxs11637
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

TREE PRUNER

09712

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our Web site at http://www.harborfreight.com

Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.

For technical questions and replacement parts, please call 1-800-444-3353.


Specifications
Blade Dimensions 0.041” Thick x 12” Long / 6 Teeth Per Inch
Jaw Dimensions 1-1/2” Diameter Lopper Cutting Capacity
Throat Depth 2-1/4”
Rope Length 110-1/2”
Pole Dimensions 53-5/8” c 1-3/32”
Tool Weight 4.52 Lbs.

Save This Manual


You will need the manual for the safety warnings and precautions, assembly instructions, operating and main-
tenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on
the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions


WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment.

Read all instructions before using this tool!

Revised Manual 09k


Safety Warnings and Precautions (continued)
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use the Pruner in damp or wet locations. Don’t expose to
rain. Keep work area well lighted.
3. Keep children away. Children must never be allowed in the work area. Do not let them handle the
Pruner.
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always
lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool to do the work of a larger industrial
tool. There are certain applications for which this tool was designed. It will do the job better and more
safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically non-conductive clothes and non-skid footwear are recommended when working.
Wear restrictive hair covering to contain long hair.
7. Use eye protection. Always wear ANSI approved impact safety goggles and a full face shield to
protect you from falling branches.
8. Do not overreach. Keep proper footing and balance at all times.
9. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool ropes periodically and, if damaged,
have them replaced by an authorized technician. The handle must be kept clean, dry, and free from oil
and grease at all times.
10. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
11. Take caution as some woods contain preservatives such as copper chromium arsenate (CCA)
which can be toxic. When cutting these materials extra care should be taken to avoid inhalation and
minimize skin contact.
12. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for alignment
and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified
technician.
13. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of
any other parts will void the warranty. Only use accessories intended for use with this tool. Approved
accessories are available from Harbor Freight Tools.
14. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking
prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the Pruner.
15. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified
technician.
16. Use tools with both hands when required. Pruners require the use of both hands when operating.
This helps maintain tool stability and keeps hands away from the working area of the tool.
17. Cutting blade is extremely sharp. The Pruner Blade (#2) will cut through whatever is in its jaws.
Keep hands clear of cutting jaws.
18. Check surrounding area. Before cutting, check that no overhead wires are within reach of the pruner.
Check that the area where the cut branches will fall to the ground is clear of pets, bystanders, and any
breakable objects.

SKU 09712 Page 2


Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover
all possible conditions and situations that may occur. It must be understood by the operator that com-
mon sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
Assembly: The only assembly required is mounting the Saw Blade (#5) to the Base (#1). Line up the tab on the
blade so that it fits in the small hole on the base making sure that the larger hole on the blade lines up with the
larger hole on the Base (#1). Insert the Bolt (#19) and a Washer (#17) through the Saw Blade (#5) and the
Base (#1). Secure it with the Wing Nut (#20). See the Assembly Drawing on page 4 and FIGURE 1 below.

Operation
1. On the Handle, twist the Lock Ring (#10) to loosen it and extend the telescoping handle to the desired length.
Tighten the Lock Ring (#10).
Note: After telescoping the Handle and before cutting, take up the slack in the rope and secure it around the
Handle, out of your way.
2. When using the Saw Blade (#5), make sure the blade is straight and not bending when cutting. Apply mimimal
pressure allowing the blade to do the work.
3. When using the Pruner Blade (#2), position the end of the handle against your hip and hold the Handle with
one hand as far up the Handle as possible. Once you situate the branch to be cut in the jaws (see FIGURE 1),
pull on the rope to clamp the Pruner Blade (#2) shut, cutting the branch.

FIGURE 1
Pruner Blade (#2)

Saw Blade (#5)

Bolt (#19
Insert
Base (#1) Branch
(Jaws)

Unpacking
When unpacking, check to make sure the parts listed on page 4 are included. If any parts are missing or bro-
ken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU-
TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE
IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

NOTE: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
SKU 09712 Page 3
Parts List and Assembly Drawing
Part No. Description Qty Part No. Description Qty
1 Base 1 15 Nylon Nut 1
2 Pruner Blade 1 16 Screw 1
3 Pole Socket 1 17 Washer 2
4 Pulling Base 1 18 Nylon Nut 1
5 Saw Blade 1 19 Mounting Bolt 1
6 Pulley Base (A) 1 20 Wing Nut 1
7 Pulley Base (B) 1 21 Screw 2
8 Pulley 2 22 Nut 2
9 Grip 1 23 Bolt 2
10 Lock Ring 1 24 Bolt 1
11 Spring 1 25 Bolt 1
12 Center Screw 1 26 Bolt 2
13 Spring Washer 1 27 Bolt 2
14 Washer 1

SKU 09712 Page 4

You might also like