Scribd
Upload
9 views

TL-SM331T(UN) 1.0 Datasheeet

The TL-SM331T is a 1000BASE-T RJ45 SFP module designed for host systems, supporting a reach of 100m over UTP Cat 5e or higher cables. It features a hot-pluggable SFP footprint, low power dissipation, and operates within a temperature range of 0-70°C. The module complies with IEEE standards and includes various pin assignments for signal transmission and power supply.

Uploaded by

Euro José Alfaro López
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

TL-SM331T(UN) 1.0 Datasheeet

The TL-SM331T is a 1000BASE-T RJ45 SFP module designed for host systems, supporting a reach of 100m over UTP Cat 5e or higher cables. It features a hot-pluggable SFP footprint, low power dissipation, and operates within a temperature range of 0-70°C. The module complies with IEEE standards and includes various pin assignments for signal transmission and power supply.

Uploaded by

Euro José Alfaro López
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1000BASE-T RJ45 SFP Module

MODEL: TL-SM331T

Overview
• Support 1000BASE-T Operation in Host Systems
• Support TX Disable function
• For 100m Reach Over UTP Cat 5e or above Cable
• Hot-Pluggable SFP Footprint Features
• Commercial Product Operating Temperature Range: 0-70°C
• Compliant with IEEE Std 802.3-2002
• Fully Metallic Enclosure for Low EMI
• Low Power Dissipation (0.5 W Typical, 0.8 W Max)
Pin Assignment

Pin Description
Pin Signal Name Description Plug Seq.

1 VEET Transmitter Ground 1

2 TX FAULT Unsupported, Connected to the ground Inside the module 3

3 TX DISABLE Transmitter Disable 3

4 MOD_DEF(2) SDA Serial Data Signal 3

5 MOD_DEF(1) SCL Serial Clock Signal 3

6 MOD_DEF(0) Absent, Connected to the ground Inside the module 3

7 Rate Select Unsupported 3

8 LOS Loss of Signal 3

9 VEER Receiver ground 1

10 VEER Receiver ground 1

11 VEER Receiver ground 1

12 RX- Inv. Received Data Out 3

13 RX+ Received Data Out 3

14 VEER Receiver ground 1

15 VCCR Receiver Power Supply 2

16 VCCT Transmitter Power Supply 2

17 VEET Transmitter Ground 1

18 TX+ Transmit Data In 3

19 TX- Inv. Transmit Data In 3

20 VEET Transmitter Ground 1


Specifications

Parameter Symbol Typ. Min. Max. Units Notes

Data rate — 1.25 — — Gbps

Distance — — — 100 m Cat 5e or above


Product Operating
— — 0 70 °C
Temperature
Storage Temperature Ts -40 85 °C +3.3 Volt Electrical
Supply Current Icc — 150 250 mA Power Interface

Recommend Input
Vcc 3.3 3.13 3.47 V
Voltage Range
SFP Output LOW VOL — 0 0.5 V

SFP Output HIGH VOH — host_Vcc – 0.5 host_Vcc + 0.3 V Low-Speed


Signals, Electronic
SFP Input LOW VIL — 0 0.8 V Characteristics
SFP Input HIGH VIH — 2 Vcc + 0.3 V

Line Frequency fL 125 — — MHz


High-Speed Electrical
Tx Output impedance Zout, TX 100 — — Ohm Interface,Transmission
Line-SFP
Rx Input Impedance Zin, RX 100 — — Ohm

input swing Vin-pp — 150 1000 mV

output swing Vout-pp 1600 600 2000 mV


Tr, Tf High-Speed Electrical
Output Rise/Fall Time — 100 200 psec
(0.2~0.8) Interface, Host-SFP
Tx Input Impedance Zin-diff 100 — — Ohm
Rx Output
Zout-diff 100 — — Ohm
Impedance

Disclaimer:
All the above parameters are measured in a laboratory environment under specific conditions.

Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their
respective holders. ©2021 TP-Link

You might also like