Pitchlign , TJ TandemRoller , Inner Rings

® ®

Heavy Duty Needle Roller Bearings

High load capacity, long life, caged roller bearings in

standard configurations and custom designs

RBC Division www.rbcbearings.com

800.390.3300
RBC Bearings Incorporated (RBC Bearings, RBC) has had a long tradi- RBC Heavy Duty Needle Roller Bearings
tion of innovation, commitment, and quality since the company was
founded in 1919. Today, RBC Bearings has grown into a world-class RBC produces an extensive heavy duty needle roller bearing product
manufacturer of standard and custom-engineered bearings and related line from 1 inch outer ring OD to 12.125 inch outer ring OD. RBC
products, with a product focus on research, testing, and development of heavy duty needle roller bearings can be found in helicopter rotors and
the best product for specific applications. transmissions, marine crankshafts and connecting rods, gear pumps, oil
field pumping jacks, and mud pumps.
What We Manufacture The RBC SJ series of Pitchlign® heavy duty needle roller bearings are
supplied in standard envelopes in both sealed and unsealed configura-
RBC Bearings, with facilities throughout North America and Europe, tions.
provides bearings and precision products for applications in the con-
struction, mining, material handling, transportation and off-highway RBC TJ TandemRoller® heavy duty needle roller bearings increase the
equipment, robotics and automation, farming, machine tool, and semi- capacity of the standard Pitchlign® SJ series from 10% to 40% while
conductor equipment industries. Through RBC Aerospace Bearings, maintaining the standard SJ envelope.
the company is a major manufacturer of highly-engineered bearings and
precision products for military, defense, and commercial aerospace RBC inner rings can be used separately or as an inner race for compli-
applications. mentary SJ or TJ roller bearings.
RBC produces metric roller bearings where volume permits.
RBC's high-quality bearings include:
How We Can Serve You
• Heavy Duty Needle Roller Bearings - Pitchlign® caged heavy duty
needle roller bearings, inner rings, TJ TandemRoller® bearings for long RBC has implemented a total quality control system that uses statistical
life. quality control at all facilities, and manufactures in high volume to a
just-in-time program.
• Spherical Plain Bearings - Radial, angular, contact, high misalign-
ment, extended inner ring, DuraLube™ maintenance-free spherical To serve the ongoing needs of customers, RBC has a network of over
plain bearings, QuadLube® long life bearings, ImpactTuff® case carbur- 1,600 distributors and sales engineers throughout North and South
ized bearings, ShimPack® double-acting angular contact bearings, America and Europe, with authorized agents worldwide. For assistance
CrossLube® lubrication groove systems, SpreadLock® Seal, and with your bearing application, contact:
MillTuff™ 3-part bearings.
Customer Service - 800.390.3300
• Cam Followers and Yoke Rollers - Standard stud, heavy stud, yoke
type, caged roller followers, RBC Roller® long life cam followers, Warranty
HexLube® universal cam followers, airframe track rollers. Mastguide
rollers and carriage rollers, chain sheaves (for leaf chain), toothless RBC products are warranted for material and workmanship for a period
sprockets (for roller chain), and heavy-duty roller bearing construction. not to exceed 90 days from shipment and for a value not to exceed pur-
chase price. No other warranty is in effect.
• Rod Ends - Commercial and aerospace, precision, Mil-Spec series,
self-lubricating, inch and metric. Heim®, Unibal®, and Spherco® Disclaimer and Intellectual Property Statement
brands.
The materials comprising this Catalog are provided by RBC Bearings
Incorporated ("RBC Bearings, RBC") as a service to its customers on an "as-is"
• Self-Lubricating Bearings - Radial, thrust, rod ends, spherical plain basis for informational purposes only. RBC assumes no responsibility for any
bearings, high temperature, high loads, inch and metric. Fiberglide® errors or omissions in these materials. RBC makes no commitment to update
brand. the information contained herein.

RBC makes no, and expressly disclaims any, representations or warranties,

• Thin Section Ball Bearings - Standard cross sections to one inch. express or implied, regarding the Catalog, including, without limitation, any
Sizes to 40 inches. Stainless steel and other materials available. Seals implied warranties of merchantability or fitness for a particular purpose. RBC
available on all sizes and standard cross sections. makes no, and expressly disclaims any, warranties, express or implied, regarding
the correctness, accuracy, completeness, timeliness, and reliability of the text,
graphics and any other items in the Catalog. Under no circumstances shall RBC,
• Airframe Control Bearings - Ball bearing types, self-lubricating its affiliates, or any of their respective partners, officers, directors, employees,
types, needle rollers, track rollers. agents or representatives be liable for any damages, whether direct, indirect, spe-
cial or consequential damages for lost revenues, lost profits, or otherwise, arising
from or in connection with this Catalog and the materials contained herein.
• Ground, Semiground, and Unground Ball Bearings - Full comple-
ment, utilizes design and burnished races for higher loads, long life, and All materials contained in the Catalog are protected by copyright laws, and may
smooth operation. not be reproduced, republished, distributed, transmitted, displayed, broadcast or
otherwise exploited in any manner without the express prior written permission
of RBC.
• Dowel Pins, Loose Needle Rollers, Shafts
RBC's names and logos and all related trademarks (including RBC Part
• Tapered Roller and Tapered Thrust Bearings - Case-hardened and Numbers, Series Number, and Cone and Cup Numbers), tradenames, and other
through-hardened in a variety of sizes, used in Class 8 heavy truck and intellectual property are the property of RBC Bearings and cannot be used with-
out its express prior written permission.
trailer wheel bearings, final drive transmissions and gear boxes.

• Ball Screws - Precision ground, rolled, ball splines. Long life, low
wear, high accuracy, QuickTurn® Ball Screw Repair Service.

• Custom Designed Bearings - RBC produces a wide range of custom

bearings in various materials for specific applications.

© 1996 RBC Bearings Incorporated

 TABLE OF CONTENTS

Precision Ground Heavy Duty Needle Roller Bearings 2-7

Precision Ground Heavy Duty Needle Roller Bearings with Seals 8-9

Inner Rings for Precision Ground Heavy Duty Needle Roller Bearings 10 - 12

TandemRoller® Bearings — TJ, DTJ Series 13 - 15

Technical Data 16 - 17

Typical Applications 18 - 19

Pitchlign® Roller Bearing Interchange Tables 20 - 25

Pitchlign® Application Sheet 26 - 28

Custom Designed Bearings 29

Other RBC Bearings Products Back Cover

1
 Precision Ground Heavy Duty Needle Roller Bearings
B

r1

Fw
D

SJ Pitchlign® Series

Fw D B r1 Housing
BEARING Inside Diameter Outside Diameter Width Housing Approx. Shoulder Dynamic Static
PART +.000 Fillet Weight Dia. Capacity Capacity
Nominal Min. Max. Max. Min.
NUMBER –.005 Max. (lbs.) +/– 1/64" C (lbs.) CO (lbs.)

SJ 7113 1/2 .5005 .5014 1.0000 .9995 .750 .04 .110 11/16 2,700 3,500
SJ 7123 9/16 .5630 .5639 1.0625 1.0620 .750 .04 .117 3/4 2,900 3,900
SJ 7133* 5/8 .6258 .6267 1.1250 1.1245 .750 .04 .109 15/16 3,900 4,800
SJ 7134* 5/8 .6258 .6267 1.1250 1.1245 1.000 .04 .137 15/16 5,200 7.000
SJ 7153* 3/4 .7509 .7518 1.2500 1.2495 .750 .04 .112 1 1/16 4,500 6,000
SJ 7154* 3/4 .7509 .7518 1.2500 1.2495 1.000 .04 .152 1 1/16 6,000 8,700
SJ 7163 13/16 .8134 .8143 1.3125 1.3120 .750 .04 .140 1 1/16 3,800 5,400
SJ 7173* 7/8 .8759 .8768 1.3750 1.3745 .750 .04 .125 1 3/16 4,700 6,700
SJ 7174* 7/8 .8759 .8768 1.3750 1.3745 1.000 .04 .169 1 3/16 6,300 9,700
SJ 7183 15/16 .9384 .9393 1.4375 1.4370 .750 .04 .152 1 3/16 4,300 6,400
SJ 7193* 1 1.0009 1.0018 1.5000 1.4995 .750 .04 .151 1 5/16 5,200 7,900
SJ 7194* 1 1.0009 1.0018 1.5000 1.4995 1.000 .04 .190 1 5/16 7,000 11,400
SJ 7204 1 1/16 1.0634 1.0643 1.5625 1.5620 1.000 .04 .235 1 5/16 6,000 10,300
SJ 7205 1 1/16 1.0634 1.0643 1.5625 1.5620 1.250 .04 .280 1 5/16 7,500 13,600
SJ 7214* 1 1/8 1.1259 1.1268 1.6250 1.6245 1.000 .04 .212 1 3/8 7,600 13,200
SJ 7215* 1 1/8 1.1259 1.1268 1.6250 1.6245 1.250 .04 .229 1 3/8 9,400 17,300
SJ 7224 1 3/16 1.1885 1.1894 1.6875 1.6870 1.000 .04 .262 1 7/16 6,700 11,800
SJ 7234* 1 1/4 1.2510 1.2519 1.7500 1.7495 1.000 .04 .242 1 9/16 7,900 14,200
SJ 7235* 1 1/4 1.2510 1.2519 1.7500 1.7495 1.250 .04 .310 1 9/16 9,700 18,600
SJ 7244 1 5/16 1.3135 1.3144 1.8125 1.8120 1.000 .04 .290 1 9/16 7,000 13,300
SJ 7245 1 5/16 1.3135 1.3144 1.8125 1.8120 1.250 .04 .350 1 9/16 8,800 17,600
SJ 7254* 1 3/8 1.3760 1.3769 1.8750 1.8745 1.000 .04 .250 1 11/16 8,400 15,900
SJ 7255* 1 3/8 1.3760 1.3769 1.8750 1.8745 1.250 .04 .315 1 11/16 8,600 17,600
SJ 7264 1 7/16 1.4385 1.4394 1.9375 1.9370 1.000 .04 .315 1 11/16 7,200 14,200
SJ 7274* 1 1/2 1.5010 1.5019 2.0625 2.0619 1.000 .06 .317 1 13/16 8,100 16,000
SJ 7275* 1 1/2 1.5010 1.5019 2.0625 2.0619 1.250 .06 .400 1 13/16 11,500 23,000
SJ 7284 1 9/16 1.5635 1.5644 2.1250 2.1244 1.000 .06 .342 1 13/16 7,600 15,700
SJ 7285 1 9/16 1.5635 1.5644 2.1250 2.1244 1.250 .06 423 1 13/16 9,400 20,700
SJ 7294* 1 5/8 1.6260 1.6269 2.1875 2.1869 1.000 .06 .342 1 15/16 10,000 19,500
SJ 7295* 1 5/8 1.6260 1.6269 2.1875 2.1869 1.250 .06 .431 1 15/16 12,400 25,600

All dimensions in inches. Alternate inner rings carry suffix -C or -D.

For matching inner rings see page 10 Example: Matching inner rings
The part numbers of matching inner rings are the same as the for bearing SJ 7315 (1 /34” x 2 5/8” x 1 1/4”):
corresponding bearing numbers, except the prefix a) IR 7315 (1 7/16”ID x 1 3/4”OD x 1 1/4”W)
SJ is replaced by the prefix IR or
Alternate inner rings with different bores are available b) IR 7315 C (1 1/2”ID x 1 3/4”OD x 1 1/4”W)
for several bearings. Inner rings must be ordered separately

2
Precision Ground Heavy Duty Needle Roller Bearings
with Inner Rings

For matching inner rings see Page 10

Recommended Shaft Diameter Recommended Housing Bore

Limit ISO h6, use with ISO f6, use with MS BEARING
Slip Fit ISO H7 Press Fit ISO N7
Speed H7 hsg fit N7 hsg fit 51961 PART
(rpm) Max. Min. Max. Min. Min. Max. Mean Fit Min. Max. Mean Fit Suffix NUMBER

26,000 .5000 .4996 .4994 .4989 1.0000 1.0008 .0006L .9989 .9997 .0004T SJ 7113
23,000 .5625 .5621 .5619 .5614 1.0625 1.0633 .0006L 1.0614 1.0622 .0004T SJ 7123
21,000 .6250 .6246 .6244 .6239 1.1250 1.1258 .0006L 1.1239 1.1247 .0004T -1 SJ 7133*
21,000 .6250 .6246 .6244 .6239 1.1250 1.1258 .0006L 1.1239 1.1247 .0004T SJ 7134*
17,000 .7500 .7495 .7492 .7487 1.2500 1.2510 .0007L 1.2487 1.2497 .0005T -2 SJ 7153*
17,000 .7500 .7495 .7492 .7487 1.2500 1.2510 .0007L 1.2487 1.2497 .0005T -3 SJ 7154*
16,000 .8125 .8120 .8117 .8112 1.3125 1.3135 .0007L 1.3112 1.3122 .0005T -4 SJ 7163
15,000 .8750 .8745 .8742 .8737 1.3750 1.3760 .0007L 1.3737 1.3747 .0005T -5 SJ 7173*
15,000 .8750 .8745 .8742 .8737 1.3750 1.3760 .0007L 1.3737 1.3747 .0005T -6 SJ 7174*
14,000 .9375 .9370 .9367 .9362 1.4375 1.4385 .0007L 1.4362 1.4372 .0005T -7 SJ 7183
13,000 1.0000 .9995 .9992 .9987 1.5000 1.5010 .0007L 1.4987 1.4997 .0005T -8 SJ 7193*
13,000 1.0000 .9995 .9992 .9987 1.5000 1.5010 .0007L 1.4987 1.4997 .0005T -9 SJ 7194*
12,000 1.0625 1.0620 1.0617 1.0612 1.5625 1.5635 .0007L 1.5612 1.5622 .0005T -10 SJ 7204
12,000 1.0625 1.0620 1.0617 1.0612 1.5625 1.5635 .0007L 1.5612 1.5622 .0005T SJ 7205
12,000 1.1250 1.1245 1.1242 1.1237 1.6250 1.6260 .0007L 1.6237 1.6247 .0005T. -11 SJ 7214*
12,000 1.1250 1.1245 1.1242 1.1237 1.6250 1.6260 .0007L 1.6237 1.6247 .0005T -12 SJ 7215*
11,000 1.1875 1.1869 1.1865 1.1859 1.6875 1.6885 .0007L 1.6862 1.6872 .0005T -13 SJ 7224
11,000 1.2500 1.2494 1.2490 1.2484 1.7500 1.7510 .0007L 1.7487 1.7497 .0005T -14 SJ 7234*
11,000 1.2500 1.2494 1.2490 1.2484 1.7500 1.7510 .0007L 1.7487 1.7497 .0005T -15 SJ 7235*
10,000 1.3125 1.3119 1.3115 1.3109 1.8125 1.8135 .0007L 1.8112 1.8122 .0005T -16 SJ 7244
10,000 1.3125 1.3119 1.3115 1.3109 1.8125 1.8135 .0007L 1.8112 1.8122 .0005T -17 SJ 7245
10,000 1.3750 1.3744 1.3740 1.3734 1.8750 1.8760 .0007L 1.8737 1.8747 .0005T -18 SJ 7254*
10,000 1.3750 1.3744 1.3740 1.3734 1.8750 1.8760 .0007L 1.8737 1.8747 .0005T -19 SJ 7255*
9,000 1.4375 1.4369 1.4365 1.4359 1.9375 1.9385 .0007L 1.9362 1.9372 .0005T -20 SJ 7264
9,000 1.5000 1.4994 1.4990 1.4984 2.0625 2.0637 .0009L 2.0610 2.0621 .0006T -21 SJ 7274*
9,000 1.5000 1.4994 1.4990 1.4984 2.0625 2.0637 .0009L 2.0610 2.0621 .0006T -22 SJ 7275*
8,500 1.5625 1.5619 1.5615 1.5609 2.1250 2.1262 .0009L 2.1235 2.1246 .0006T SJ 7284
8,500 1.5625 1.5619 1.5615 1.5609 2.1250 2.1262 .0009L 2.1235 2.1246 .0006T -23 SJ 7285
8,000 1.6250 1.6244 1.6240 1.6234 2.1875 2.1887 .0009L 2.1860 2.1871 .0006T -24 SJ 7294*
8,000 1.6250 1.6244 1.6240 1.6234 2.1875 2.1887 .0009L 2.1860 2.1871 .0006T -25 SJ 7295*
The bearings meet Military Standard MS 51961.
* These bearings have a radius at both ends of the outer ring.
All other outer rings are manufactured with a radius at one end and a break corner at the other.

3
 Precision Ground Heavy Duty Needle Roller Bearings

SJ Pitchlign® Series
Fw D B r1 Housing
BEARING Inside Diameter Outside Diameter Width Housing Approx. Shoulder Dynamic Static
PART +.000 Fillet Weight Dia. Capacity Capacity
NUMBER Nominal Min. Max. Max. Min. C (lbs.) CO (lbs.)
–.005 Max. (lbs.) +/– 1/64"

SJ 7304 1 11/16 1.6885 1.6895 2.2500 2.2494 1.000 .06 .37 1 15/16 7,600 15,900
SJ 7305 1 11/16 1.6885 1.6895 2.2500 2.2494 1.250 .06 .46 1 15/16 9,500 21,100
SJ 7314* 1 3/4 1.7510 1.7520 2.3125 2.3119 1.000 .06 .36 2 1/16 9,900 19,700
SJ 7315* 1 3/4 1.7510 1.7520 2.3125 2.3119 1.250 .06 .46 2 1/16 12,400 26,100
SJ 7324 1 13/16 1.8135 1.8145 2.3750 2.3744 1.000 .06 .40 2 1/16 8,000 17,300
SJ 7325 1 13/16 1.8135 1.8145 2.3750 2.3744 1.250 .06 .49 2 1/16 10,000 23,100
SJ 7334* 1 7/8 1.8760 1.8770 2.4375 2.4369 1.000 .06 .38 2 3/16 10,400 21,500
SJ 7335* 1 7/8 1.8760 1.8770 2.4375 2.4369 1.250 .06 .48 2 3/16 12,900 26,600
SJ 7344 1 15/16 1.9385 1.9395 2.5000 2.4994 1.000 .06 .42 2 3/16 8,100 18,100
SJ 7345 1 15/16 1.9385 1.9395 2.5000 2.4994 1.250 .06 .53 2 3/16 10,100 24,100
SJ 7354* 2 2.0011 2.0021 2.5625 2.5619 1.000 .06 .40 2 5/16 10,700 22,500
SJ 7355* 2 2.0011 2.0021 2.5625 2.5619 1.250 .06 .51 2 5/16 13,300 29,900
SJ 8406 2 1/4 2.2511 2.2521 3.0000 2.9994 1.500 .08 1.07 2 5/8 15,100 33,200
SJ 8407 2 1/4 2.2511 2.2521 3.0000 2.9994 1.750 .08 1.25 2 5/8 17,600 40,500
SJ 8446 2 1/2 2.5011 2.5021 3.2500 3.2494 1.500 .08 1.18 2 7/8 15,800 36,400
SJ 8447 2 1/2 2.5011 2.5021 3.2500 3.2494 1.750 .08 1.38 2 7/8 18,400 44,500
SJ 8476 2 3/4 2.7511 2.7521 3.5000 3.4992 1.500 .08 1.26 3 1/8 16,400 39,600
SJ 8477 2 3/4 2.7511 2.7521 3.5000 3.4992 1.750 .08 1.47 3 1/8 19,200 48,400
SJ 8516 3 3.0011 3.0023 3.7500 3.7492 1.500 .08 1.35 3 3/8 17,500 44,200
SJ 8517 3 3.0011 3.0023 3.7500 3.7492 1.750 .08 1.57 3 3/8 20,400 54,100
SJ 8536 3 1/8 3.1261 3.1273 4.0000 3.9992 1.500 .08 1.40 3 1/2 17,800 45,800
SJ 8537 3 1/8 3.1261 3.1273 4.0000 3.9992 1.750 .08 1.63 3 1/2 20,800 56,000
SJ 9567 3 1/4 3.2512 3.2524 4.2500 4.2492 1.750 .10 2.35 3 11/16 23,500 55,100
SJ 9568 3 1/4 3.2512 3.2524 4.2500 4.2492 2.000 .10 2.69 3 11/16 26,800 65,500

All dimensions in inches. Alternate inner rings carry the suffix -C or -D.
For matching inner rings see page 11 Example: Matching inner rings
The part numbers of matching inner rings are the same as the for bearing SJ 7355 (2" x 2 9/16" x 1 1/4"):
corresponding bearing numbers, except that the prefix a) IR 7355 D (1 5/8"ID x 2"OD x 1 1/4"W)
SJ is replaced by the prefix IR. or
Alternate inner rings with different bores are available b) IR 7355 (1 11/16"ID x 2"OD x 1 1/4"W)
for several bearings. Inner rings must be ordered separately.

4
 Precision Ground Heavy Duty Needle Roller Bearings
with Inner Rings

For matching inner rings see page 11

Recommended Shaft Diameter Recommended Housing Bore

Limit ISO h6, use with ISO f6, use with MS BEARING
Speed H7 hsg fit N7 hsg fit Slip Fit ISO H7 Press Fit ISO N7 51961 PART
(rpm) Max. Min. Max. Min. Min. Max. Mean Fit Min. Max. Mean Fit Suffix NUMBER

7,900 1.6875 1.6869 1.6865 1.6859 2.2500 2.2512 .0009L 2.2485 2.2496 .0006T SJ 7304
7,900 1.6875 1.6869 1.6865 1.6859 2.2500 2.2512 .0009L 2.2485 2.2496 .0006T -26 SJ 7305
7,600 1.7500 1.7494 1.7490 1.7484 2.3125 2.3137 .0009L 2.3110 2.3121 .0006T -27 SJ 7314*
7,600 1.7500 1.7494 1.7490 1.7484 2.3125 2.3137 .0009L 2.3110 2.3121 .0006T -28 SJ 7315*
7,400 1.8125 1.8119 1.8115 1.8109 2.3750 2.3762 .0009L 2.3735 2.3746 .0006T SJ 7324
7,400 1.8125 1.8119 1.8115 1.8109 2.3750 3.3762 .0009L 2.3735 2.3746 .0006T SJ 7325
7,100 1.8750 1.8744 1.8740 1.8734 2.4375 2.4387 .0009L 2.4360 2.4371 .0006T SJ 7334*
7,100 1.8750 1.8744 1.8740 1.8734 2.4375 2.4387 .0009L 2.4360 2.4371 .0006T -29 SJ 7335*
6,900 1.9375 1.9369 1.9365 1.9359 2.5000 2.5012 .0009L 2.4985 2.4996 .0006T SJ 7344
6,900 1.9375 1.9369 1.9365 1.9359 2.5000 2.5012 .0009L 2.4985 2.4996 .0006T SJ 7345
6,700 2.0000 1.9993 1.9988 1.9981 2.5625 2.5637 .0009L 2.5610 2.5621 .0006T SJ 7354*
6,700 2.0000 1.9993 1.9988 1.9981 2.5625 2.5637 .0009L 2.5610 2.5621 .0006T -30 SJ 7355*
5,900 2.2500 2.2493 2.2488 2.2481 3.0000 3.0012 .0009L 2.9985 2.9996 .0006T -31 SJ 8406
5,900 2.2500 2.2493 2.2488 2.2481 3.0000 3.0012 .0009L 2.9985 2.9996 .0006T -32 SJ 8407
5,300 2.5000 2.4993 2.4988 2.4981 3.2500 3.2514 .0011L 3.2482 3.2496 .0006T -33 SJ 8446
5,300 2.5000 2.4993 2.4988 2.4981 3.2500 3.2514 .0011L 3.2482 3.2496 .0006T -34 SJ 8447
4,800 2.7500 2.7493 2.7488 2.7481 3.5000 3.5014 .0011L 3.4982 3.4996 .0007T -35 SJ 8476
4,800 2.7500 2.7493 2.7488 2.7481 3.5000 3.5014 .0011L 3.4982 3.4996 .0007T -36 SJ 8477
4,500 3.0000 2.9993 2.9988 2.9981 3.7500 3.7514 .0011L 3.7482 3.7496 .0007T -37 SJ 8516
4,500 3.0000 2.9993 2.9988 2.9981 3.7500 3.7514 .0011L 3.7482 3.7496 .0007T -38 SJ 8517
4,300 3.1250 3.1243 3.1238 3.1231 4.0000 4.0014 .0011L 3.9982 3.9996 .0007T SJ 8536
4,300 3.1250 3.1243 3.1238 3.1231 4.0000 4.0014 .0011L 3.9982 3.9996 .0007T SJ 8537
4,100 3.2500 3.2491 3.2486 3.2477 4.2500 4.2514 .0011L 4.2482 4.2496 .0007T -39 SJ 9567
4,100 3.2500 3.2491 3.2486 3.2477 4.2500 4.2514 .0011L 4.2482 4.2496 .0007T -40 SJ 9568
These bearings meet Military Standard MS 51961.
* These bearings have a radius at both ends of the outer ring.
All other RBC outer rings are manufactured with a radius at one end and a break corner at the other.

5
 Precision Ground Heavy Duty Needle Roller Bearings
B

r1

Fw
D

Fw D B r1 Housing
BEARING Inside Diameter Outside Diameter Width Housing Approx. Shoulder Dynamic Static
PART +.000 Fillet Weight Dia. Capacity Capacity
NUMBER Nominal Min. Max. Max. Min.
–.005 Max. (lbs.) +/– 1/64" C (lbs.) CO (lbs.)

SJ 9607 3 1/2 3.5012 3.5024 4.5000 4.4992 1.750 .10 2.47 3 15/16 24,400 59,600
SJ 9608 3 1/2 3.5012 3.5024 4.5000 4.4992 2.000 .10 2.82 3 15/16 27,900 70,900
SJ 9648 3 3/4 3.7512 3.7524 4.7500 4.7492 2.000 .10 3.00 4 3/16 27,700 71,300
SJ 9687 4 4.0012 4.0024 5.0000 4.9990 1.750 .10 2.79 4 7/16 25,700 66,900
SJ 9688 4 4.0012 4.0024 5.0000 4.9990 2.000 .10 3.19 4 7/16 29,400 79,600
SJ 9717 4 1/8 4.1262 4.1274 5.1250 5.1240 1.750 .10 2.84 4 9/16 26,400 69,300
SJ 9718 4 1/8 4.1262 4.1274 5.1250 5.1240 2.000 .10 3.25 4 9/16 30,200 82,400
SJ 9728 4 1/4 4.2512 4.2526 5.2500 5.2490 2.000 .10 3.35 4 11/16 30,600 85,200
SJ 6768 4 1/2 4.5012 4.5026 6.0000 5.9990 2.000 .12 5.40 5 1/8 37,700 82,900
SJ 6769 4 1/2 4.5012 4.5026 6.0000 5.9990 2.250 .12 6.08 5 1/8 42,800 97,600
SJ 6770 4 1/2 4.5012 4.5026 6.0000 5.9990 2.500 .12 6.75 5 1/8 47,800 112,000
SJ 6848 5 5.0013 5.0027 6.5000 6.4990 2.000 .12 5.91 5 5/8 40,700 94,500
SJ 6849 5 5.0013 5.0027 6.5000 6.4990 2.250 .12 6.65 5 5/8 46,200 111,000
SJ 6850 5 5.0013 5.0027 6.5000 6.4990 2.500 .12 7.38 5 5/8 51,500 128,000
SJ 6918 5 1/2 5.5013 5.5027 7.0000 6.9990 2.500 .12 8.00 6 1/8 53,600 139,000
SJ 6919 5 1/2 5.5013 5.5027 7.0000 6.9990 3.000 .12 9.60 6 1/8 64,200 175,000
SJ 6925 6 6.0013 6.0027 7.5000 7.4988 2.500 .12 8.62 6 5/8 55,500 150,000
SJ 6926 6 6.0013 6.0027 7.5000 7.4988 3.000 .12 10.37 6 5/8 66,500 189,000
SJ 6935 6 1/2 6.5013 6.5029 8.0000 7.9988 2.500 .12 9.55 7 1/8 58,600 166,000
SJ 6936 6 1/2 6.5013 6.5029 8.0000 7.9988 3.000 .12 11.48 7 1/8 70,200 209,000
SJ 2325 7 1/4 7.2514 7.2530 9.1250 9.1238 2.500 .14 13.11 8 1/8 64,400 162,000
SJ 2326 7 1/4 7.2514 7.2530 9.1250 9.1238 3.000 .14 15.75 8 1/8 78,500 209,000
SJ 2425 7 3/4 7.7514 7.7530 9.6250 9.6238 2.500 .14 14.20 8 5/8 67,600 175,500
SJ 2426 7 3/4 7.7514 7.7530 9.6250 9.6238 3.000 .14 17.05 8 5/8 82,000 225,000
SJ 2526 8 1/4 8.2514 8.2532 10.1250 10.1238 3.000 .14 18.41 9 1/8 85,300 241,000
SJ 2625 8 3/4 8.7514 8.7532 10.6250 10.6236 2.500 .14 16.45 9 5/8 72,000 199,000
SJ 2626 8 3/4 8.7514 8.7532 10.6250 10.6236 3.000 .14 19.75 9 5/8 87,800 257,000
SJ 2726 9 1/4 9.2514 9.2532 11.1250 11.1236 3.000 .14 21.07 10 1/8 90,800 273,000
SJ 2926 10 1/4 10.2515 10.2533 12.1250 12.1236 3.000 .14 23.05 11 1/8 96,500 305,000
All dimensions in inches. Alternate inner rings carry the suffix -C or -D.
For matching inner rings see page 12 Example: Matching inner rings
The part numbers of matching inner rings are the same as the for bearing SJ 9688 ( 4" x 5" x 2") are:
corresponding bearing numbers, except that the prefix a) IR 9688 D (3 1/4"ID x 4"OD x 2"W)
SJ is replaced by the prefix IR. or
Alternate inner rings with different inside diameters are available b) IR 9688 (3 3/8"ID x 4"OD x 2"W)
for several bearings. c) IR 9688 C (3 1/2"ID x 4"OD x 2"W)
Inner rings must be ordered separately.
6
 Precision Ground Heavy Duty Needle Roller Bearings
with Inner Rings

For matching inner rings see page 12

Recommended Shaft Diameter Recommended Housing Bore

Limit ISO h6, use with ISO f6, use with MS BEARING
Speed N7 hsg fit Slip Fit ISO H7 Press Fit ISO N7 51961 PART
H7 hsg fit
(rpm) Max. Min. Max. Min. Min. Max. Mean Fit Min. Max. Mean Fit Suffix NUMBER

3,800 3.5000 3.4991 3.4986 3.4977 4.5000 4.5014 .0011L 4.4982 4.4996 .0007T -41 SJ 9607
3,800 3.5000 3.4991 3.4986 3.4977 4.5000 4.5014 .0011L 4.4982 4.4996 .0007T -42 SJ 9608
3,600 3.7500 3.7491 3.7486 3.7477 4.7500 4.7516 .0012L 4.7480 4.7495 .0007T -43 SJ 9648
3,300 4.0000 3.9991 3.9986 3.9977 5.0000 5.0016 .0013L 4.9980 4.9995 .0009T -44 SJ 9687
3,300 4.0000 3.9991 3.9986 3.9977 5.0000 5.0016 .0013L 4.9980 4.9995 .0009T -45 SJ 9688
3,200 4.1250 4.1241 4.1236 4.1227 5.1250 5.1266 .0013L 5.1230 5.1245 .0009T SJ 9717
3,200 4.1250 4.1241 4.1236 4.1227 5.1250 5.1266 .0013L 5.1230 5.1245 .0009T SJ 9718
3,100 4.2500 4.2491 4.2486 4.2477 5.2500 5.2516 .0013L 5.2480 5.2495 .0009T -46 SJ 9728
3,000 4.5000 4.4991 4.4986 4.4977 6.0000 6.0016 .0013L 5.9980 5.9995 .0009T -47 SJ 6768
3,000 4.5000 4.4991 4.4986 4.4977 6.0000 6.0016 .0013L 5.9980 5.9995 .0009T -48 SJ 6769
3,000 4.5000 4.4991 4.4986 4.4977 6.0000 6.0016 .0013L 5.9980 5.9995 .0009T -49 SJ 6770
2,700 5.0000 4.9990 4.9983 4.9973 6.5000 6.5016 .0013L 6.4980 6.4995 .0009T -50 SJ 6848
2,700 5.0000 4.9990 4.9983 4.9973 6.5000 6.5016 .0013L 6.4980 6.4995 .0009T SJ 6849
2,680 5.0000 4.9990 4.9983 4.9973 6.5000 6.5016 .0013L 6.4980 6.4995 .0009T -51 SJ 6850
2,400 5.5000 5.4990 5.4983 5.4973 7.0000 7.0016 .0013L 6.9980 6.9995 .0009T -52 SJ 6918
2,400 5.5000 5.4990 5.4983 5.4973 7.0000 7.0016 .0013L 6.9980 6.9995 .0009T -53 SJ 6919
2,200 6.0000 5.9990 5.9983 5.9973 7.5000 7.5018 .0015L 7.4976 7.4994 .0011T -55 SJ 6925
2,200 6.0000 5.9990 5.9983 5.9973 7.5000 7.5018 .0015L 7.4976 7.4994 .0011T -56 SJ 6926
2,000 6.5000 6.4990 6.4983 6.4973 8.0000 8.0018 .0015L 7.9976 7.9994 .0011T -57 SJ 6935
2,000 6.5000 6.4990 6.4983 6.4973 8.0000 8.0018 .0015L 7.9976 7.9994 .0011T -58 SJ 6936
1,800 7.2500 7.2489 7.2480 7.2469 9.1250 9.1268 .0015L 9.1226 9.1244 .0011T SJ 2325
1,800 7.2500 7.2489 7.2480 7.2469 9.1250 9.1268 .0015L 9.1226 9.1244 .0011T -59 SJ 2326
1,700 7.7500 7.7489 7.7480 7.7469 9.6250 9.6268 .0015L 9.6226 9.6244 .0011T SJ 2425
1,700 7.7500 7.7489 7.7480 7.7469 9.6250 9.6268 .0015L 9.6226 9.6244 .0011T SJ 2426
1,600 8.2500 8.2489 8.2480 8.2469 10.1250 10.1270 .0016L 10.1224 10.1244 .0011T SJ 2526
1,500 8.7500 8.7489 8.7480 8.7469 10.6250 10.6270 .0017L 10.6224 10.6244 .0011T SJ 2625
1,500 8.7500 8.7489 8.7480 8.7469 10.6250 10.6270 .0017L 10.6224 10.6244 .0011T SJ 2626
1,400 9.2500 9.2489 9.2480 9.2469 11.1250 11.1270 .0017L 11.1224 11.1244 .0011T SJ 2726
1,300 10.2500 10.2487 10.2478 10.2465 12.1250 12.1270 .0017L 12.1224 12.1244 .0011T SJ 2926

These bearings meet Military Standard MS 51961.

7
 Precision Ground Heavy Duty Needle Roller Bearings
with Seals

Fw D B r1 Housing
BEARING Inside Diameter Outside Diameter Width Housing Approx. Shoulder Dynamic Static
PART +.000 Fillet Weight Dia. Capacity Capacity
NUMBER Nominal Min. Max. Max. Min. –.005 Max. (lbs.) +/– 1/64" C (lbs.) CO (lbs.)

SJ 7134 SS 5/8 .6258 .6267 1.1250 1.1245 1.000 .04 .156 15/16 3,200 4,000
SJ 7154 SS 3/4 .7509 .7518 1.2500 1.2495 1.000 .04 .171 1 1/16 4,500 6,000
SJ 7174 SS 7/8 .8759 .8768 1.3750 1.3745 1.000 .04 .187 1 3/16 4,700 6,700
SJ 7194 SS 1 1.0009 1.0018 1.5000 1.4995 1.000 .04 .218 1 5/16 5,200 7,900
SJ 7215 SS 1 1/8 1.1259 1.1268 1.6250 1.6245 1.250 .04 .282 1 3/8 7,600 13,200
SJ 7235 SS 1 1/4 1.2510 1.2519 1.7500 1.7495 1.250 .04 .380 1 9/16 7,900 14,200
SJ 7255 SS 1 3/8 1.3760 1.3769 1.8750 1.8745 1.250 .04 .410 1 11/16 8,400 15,900
SJ 7275 SS 1 1/2 1.5010 1.5019 2.0625 2.0619 1.250 .06 .438 1 13/16 8,100 16,000
SJ 7295 SS 1 5/8 1.6260 1.6269 2.1875 2.1869 1.250 .06 .468 1 15/16 10,000 19,500
SJ 7315 SS 1 3/4 1.7510 1.7520 2.3125 2.3119 1.250 .06 .500 2 1/16 9,900 19,700
SJ 7335 SS 1 7/8 1.8760 1.8770 2.4375 2.4369 1.250 .06 .527 2 3/16 10,400 21,500
SJ 7355 SS 2 2.0011 2.0021 2.5625 2.5619 1.250 .06 .562 2 1/16 10,700 22,500
SJ 8407 SS 2 1/4 2.2511 2.2521 3.0000 2.9994 1.750 .08 1.25 2 5/8 15,100 33,200
SJ 8447 SS 2 1/2 2.5011 2.5021 3.2500 3.2494 1.750 .08 1.38 2 7/8 15,800 36,400
SJ 8477 SS 2 3/4 2.7511 2.7521 3.5000 3.4992 1.750 .08 1.46 3 1/8 16,300 39,600
SJ 8517 SS 3 3.0011 3.0023 3.7500 3.7492 1.750 .08 1.57 3 3/8 17,600 44,200
SJ 9568 SS 3 1/4 3.2512 3.2524 4.2500 4.2492 2.000 .10 2.69 3 11/16 23,500 55,100
SJ 9608 SS 3 1/2 3.5012 3.5024 4.5000 4.4992 2.000 .10 2.82 3 15/16 24,200 59,900
SJ 9648 SS 3 3/4 3.7512 3.7524 4.7500 4.7492 2.000 .10 3.00 4 3/16 25,600 64,600
SJ 9688 SS 4 4.0012 4.0024 5.0000 4.9990 2.000 .10 3.19 4 7/16 26,200 67,200
SJ 9718 SS 4 1/8 4.1262 4.1274 5.1250 5.1240 2.000 .10 3.25 4 9/16 26,000 69,500
All dimensions in inches. Example: Suitable inner rings
For matching inner rings see pages 10-12. for bearing SJ 8447 SS ( 2 1/2" x 3 1/4" x 1 3/4") are:
The numeric portion of a suitable inner ring a) IR 8447 (1 15/16"ID x 2 1/2"OD x 1 3/4"W)
part number matches the numeric component or
of the bearing. Inner rings with suffix -C or -D b) IR 8447 C (2"ID x 2 1/2"OD x 1 3/4"W)
differ in inside diameter. or
c) IR 8447 C1 (2 1/8"ID x 2 1/2"OD x 1 3/4"W).
Inner rings must be ordered separately.

8
 Available Seal Configurations

TYPE—S TYPE—SS TYPE—SR TYPE—SX

Single seal mounted in Double seal with sealing lips Double seal with one seal mounted in Single seal mounted in
radius end of ring with sealing turned outward to chamfered end with sealing lip turned chamfered end of ring with
lip turned outward to exclude dirt. outward to exclude dirt and one seal sealing lip turned outward to
exclude dirt. Bearing # SJ — SS mounted in radius end with sealing lip exclude dirt.
Bearing # SJ — S turned inward to retain lubricant. Bearing # SJ — SX
Bearing # SJ — SR

TYPE—R TYPE—RR TYPE—RS TYPE—RX

Single seal mounted in Double seal with sealing lips Double seal with one seal mounted in chamfered Single seal mounted in
radius end of ring with sealing turned inward to retain lubricant. end with sealing lip turned inward to retain chamfered end of ring with
lip turned inward to retain Bearing # SJ — RR lubricant and one seal mounted in radius end sealing lip turned inward to
lubricant. with sealing lip turned outward to exclude dirt. retain lubricant.
Bearing # SJ — R Bearing # SJ — RX

CAUTION
1. When assembling shaft against the sealing lip, the shaft end must be chamfered.
2. For effective sealing the shaft must have a finish of 20 micro inches maximum.
3. These seals are suitable for shaft speeds of 1,000 feet per minute—higher speeds are possible but seal life is shortened.
4. This type of seal is suitable for a continuous operating temperature of 250° F. However, they will operate under intermittent temperatures of up to 300° F.
5. When ordering, be sure to designate how the seal is to be mounted by using the correct suffix—unless specified otherwise, type "SS" will be shipped.

Recommended Shaft Diameter Recommended Housing Bore

Limit ISO h6, use with ISO f6, use with BEARING
Speed N7 hsg fit Slip Fit ISO H7 Press Fit ISO N7
H7 hsg fit PART
(rpm)
Max. Min. Max. Min. Min. Max. Mean Fit Min. Max. Mean Fit NUMBER

6,100 .6250 .6246 .6244 .6239 1.1250 1.1258 .0006L 1.1239 1.1247 .0004T SJ 7134 SS
5,100 .7500 .7495 .7492 .7487 1.2500 1.2510 .0007L 1.2487 1.2497 .0005T SJ 7154 SS
4,400 .8750 .8745 .8742 .8737 1.3750 1.3760 .0007L 1.3737 1.3747 .0005T SJ 7174 SS
3,800 1.0000 .9995 .9992 .9987 1.5000 1.5010 .0007L 1.4987 1.4997 .0005T SJ 7194 SS
3,400 1.1250 1.1245 1.1242 1.1237 1.6250 1.6260 .0007L 1.6237 1.6247 .0005T SJ 7215 SS
3,100 1.2500 1.2494 1.2490 1.2484 1.7500 1.7510 .0007L 1.7487 1.7497 .0005T SJ 7235 SS
2,800 1.3750 1.3744 1.3740 1.3734 1.8750 1.8760 .0007L 1.8737 1.8747 .0005T SJ 7255 SS
2,500 1.5000 1.4994 1.4990 1.4984 2.0625 2.0637 .0009L 2.0610 2.0621 .0006T SJ 7275 SS
2,400 1.6250 1.6244 1.6240 1.6234 2.1875 2.1887 .0009L 2.1860 2.1871 .0006T SJ 7295 SS
2,200 1.7500 1.7494 1.7490 1.7484 2.3125 2.3137 .0009L 2.3110 2.3121 .0006T SJ 7315 SS
2,000 1.8750 1.8744 1.8740 1.8734 2.4375 2.4387 .0009L 2.4360 2.4371 .0006T SJ 7335 SS
1,900 2.0000 1.9993 1.9988 1.9981 2.5625 2.5637 .0009L 2.5610 2.5621 .0006T SJ 7355 SS
1,700 2.2500 2.2493 2.2488 2.2481 3.0000 3.0012 .0009L 2.9985 2.9996 .0006T SJ 8407 SS
1,500 2.5000 2.4993 2.4988 2.4981 3.2500 3.2514 .0010L 3.2482 3.2496 .0006T SJ 8447 SS
1,400 2.7500 2.7493 2.7488 2.7481 3.5000 3.5014 .0011L 3.4982 3.4996 .0007T SJ 8477 SS
1,300 3.0000 2.9993 2.9988 2.9981 3.7500 3.7514 .0011L 3.7482 3.7496 .0007T SJ 8517 SS
1,200 3.2500 3.2491 3.2486 3.2477 4.2500 4.2514 .0011L 4.2482 4.2496 .0007T SJ 9568 SS
1,100 3.5000 3.4991 3.4986 3.4977 4.5000 4.5014 .0011L 4.4982 4.4996 .0007T SJ 9608 SS
1,000 3.7500 3.7491 3.7486 3.7477 4.7500 4.7516 .0012L 4.7480 4.7495 .0008T SJ 9648 SS
950 4.0000 3.9991 3.9986 3.9977 5.0000 5.0016 .0013L 4.9980 4.9995 .0008T SJ 9688 SS
950 4.1250 4.1241 4.1236 4.1227 5.1250 5.1266 .0013L 5.1230 5.1245 .0008T SJ 9718 SS

Outer rings have a radius on one end and a break corner at the opposite end.

9
 Inner Rings

INNER d F r2 RECOMMENDED SHAFT DIAMETER

Inside Diameter Outside Diameter B
RING Shaft Approx. Slip Fit Press Fit MS
Width
PART Nominal Nominal +.000 Fillet Weight ISO g6 ISO m5 51962
NUMBER 1) Min. Max. 1) Max. Min. -.005 Max. (lbs) Max. Min. Max. Min. suffix

IR 7133 3/8 .3746 .3750 5/8 .6245 .6241 .760 .04 .042 .3748 .3744 .3755 .3752 -1
IR 7134 3/8 .3746 .3750 5/8 .6245 .6241 1.010 .04 .055 .3748 .3744 .3755 .3752
IR 7153 1/2 .4996 .5000 3/4 .7493 .7488 .760 .04 .050 .4997 .4993 .5006 .5003 -2
IR 7154 1/2 .4996 .5000 3/4 .7493 .7488 1.010 .04 .067 .4997 .4993 .5006 .5003 -3
IR 7153 C 9/16 .5621 .5625 3/4 .7493 .7488 .760 .04 .041 .5622 .5618 .5631 .5628
IR 7154 C 9/16 .5621 .5625 3/4 .7493 .7488 1.010 .04 .055 .5622 .5618 .5631 .5628
IR 7173 5/8 .6246 .6250 7/8 .8743 .8738 .760 .04 .058 .6247 .6243 .6256 .6253 -4
IR 7174 5/8 .6246 .6250 7/8 .8743 .8738 1.010 .04 .077 .6247 .6243 .6256 .6253
IR 7173 C 11/16 .6871 .6875 7/8 .8743 8738 .760 .04 .049 .6872 .6868 .6881 .6878
IR 7193 3/4 .7496 .7500 1 .9993 .9988 .760 .04 .065 .7497 .7492 .7507 .7503 -5
IR 7194 3/4 .7496 .7500 1 .9993 .9988 1.010 .04 .087 .7497 .7492 .7507 .7503
IR 7193 C 13/16 .8120 .8125 1 .9993 .9988 .760 .04 .057 .8122 .8117 .8132 .8128 -6
IR 7194 C 13/16 .8120 .8125 1 .9993 .9988 1.010 .04 .076 .8122 .8117 .8132 .8128 -7
IR 7204 13/16 .8120 .8125 1 1/16 1.0618 1.0613 1.010 .04 .097 .8122 .8117 .8132 .8128
IR 7205 13/16 .8120 .8125 1 1/16 1.0618 1.0613 1.260 .04 .121 .8122 .8117 .8132 .8128
IR 7214 7/8 .8745 .8750 1 1/8 1.1241 1.1236 1.010 .04 .106 .8747 .8742 .8757 .8753 -8
IR 7215 7/8 .8745 .8750 1 1/8 1.1241 1.1236 1.260 .04 .132 .8747 .8742 .8757 .8753
IR 7214 C 15/16 .9370 .9375 1 1/8 1.1241 1.1236 1.010 .04 .086 .9372 .9367 .9382 .9378 -9
IR 7215 C 15/16 .9370 .9375 1 1/8 1.1241 1.1236 1.260 .04 .108 .9372 .9367 .9382 .9378
IR 7234 1 .9995 1.0000 1 1/4 1.2491 1.2485 1.010 .04 .126 .9997 .9992 1.0007 1.0003 -10
IR 7235 1 .9995 1.0000 1 1/4 1.2491 1.2485 1.260 .04 .157 .9997 .9992 1.0007 1.0003 -11
IR 7244 1 1/16 1.0620 1.0625 1 5/16 1.3116 1.3110 1.010 .04 .130 1.0622 1.0617 1.0632 1.0628
IR 7245 1 1/16 1.0620 1.0625 1 5/16 1.3116 1.3110 1.260 .04 .163 1.0622 1.0617 1.0632 1.0628
IR 7254 D 1 .9995 1.0000 1 3/8 1.3741 1.3735 1.010 .04 .178 .9997 .9992 1.0007 1.0003
IR 7255 D 1 1/16 1.0620 1.0625 1 3/8 1.3741 1.3735 1.260 .04 .222 1.0622 1.0617 1.0632 1.0628
IR 7254 1 1/8 1.1245 1.1250 1 3/8 1.3741 1.3735 1.010 .04 .135 1.1247 1.1242 1.1257 1.1253 -12
IR 7255 1 1/8 1.1245 1.1250 1 3/8 1.3741 1.3735 1.260 .04 .169 1.1247 1.1242 1.1257 1.1253 -13
IR 7274 1 3/16 1.1870 1.1875 1 1/2 1.4990 1.4984 1.010 .06 .184 1.1871 1.1865 1.1883 1.1879
IR 7275 1 3/16 1.1870 1.1875 1 1/2 1.4990 1.4984 1.260 .06 .230 1.1871 1.1865 1.1883 1.1879 -14
IR 7274 C 1 1/4 1.2495 1.2500 1 1/2 1.4990 1.4984 1.010 .06 .086 1.2496 1.2490 1.2508 1.2504 -15
IR 7275 C 1 1/4 1.2495 1.2500 1 1/2 1.4990 1.4984 1.260 .06 .191 1.2496 1.2490 1.2508 1.2504 -16
IR 7284 1 1/4 1.2495 1.2500 1 9/16 1.5615 1.5609 1.010 .06 .184 1.2496 1.2490 1.2508 1.2504
IR 7285 1 1/4 1.2495 1.2500 1 9/16 1.5615 1.5609 1.260 .06 .228 1.2496 1.2490 1.2508 1.2504
IR 7295 D 1 1/4 1.2495 1.2500 1 5/8 1.6240 1.6234 1.260 .06 .299 1.2496 1.2490 1.2508 1.2504
1 5/16 1.3120 1.3125 1 5/8 1.6240 1.6234 1.260 .06 1.3121 1.3115 1.3133 1.3129
1 5/16 1.3120 1.3125 1 5/8 1.6240 1.6234 1.010 .06 1.3121 1.3115 1.3133 1.3129
IR 7295 C 1 3/8 1.3745 1.3750 1 5/8 1.6240 1.6234 1.260 .06 .209 1.3746 1.3740 1.3758 1.3754 -18
IR 7304 1 3/8 1.3745 1.3750 1 11/16 1.6865 1.6859 1.010 .06 .212 1.3746 1.3740 1.3758 1.3754
IR 7305 1 3/8 1.3745 1.3750 1 11/16 1.6865 1.6859 1.260 .06 .265 1.3746 1.3740 1.3758 1.3754
All dimensions in inches
These inner rings meet Military Standard MS 51962
1) Sorted by outside diameter.

10
 Inner Rings

INNER d F r2 RECOMMENDED SHAFT DIAMETER

Inside Diameter Outside Diameter B
RING Shaft Approx. Slip Fit Press Fit MS
Width
PART Nominal Nominal +.000 Fillet Weight ISO g6 ISO m5 51962
NUMBER 1) Min. Max. 1) Max. Min. -.005 Max. (lbs) Max. Min. Max. Min. suffix

IR 7315 D 1 3/8 1.3745 1.3750 1 3/4 1.7490 1.7484 1.260 .06 .328 1.3746 1.3740 1.3758 1.3754 -19
IR 7314 1 7/16 1.4370 1.4375 1 3/4 1.7490 1.7484 1.010 .06 .223 1.4371 1.4365 1.4383 1.4379
IR 7315 1 7/16 1.4370 1.4375 1 3/4 1.7490 1.7484 1.260 .06 .278 1.4371 1.4365 1.4383 1.4379 -20
IR 7314 C 1 1/2 1.4995 1.5000 1 3/4 1.7490 1.7484 1.010 .06 .182 1.4996 1.4990 1.5008 1.5004 -21
IR 7315 C 1 1/2 1.4995 1.5000 1 3/4 1.7490 1.7484 1.260 .06 .227 1.4996 1.4990 1.5008 1.5004 -22
IR 7324 1 1/2 1.4995 1.5000 1 13/16 1.8115 1.8109 1.010 .06 .232 1.4996 1.4990 1.5008 1.5004
IR 7325 1 1/2 1.4995 1.5000 1 13/16 1.8115 1.8109 1.260 .06 .289 1.4996 1.4990 1.5008 1.5004
IR 7334 1 9/16 1.5620 1.5625 1 7/8 1.8740 1.8734 1.010 .06 .240 1.5621 1.5615 1.5633 1.5629
IR 7335 1 9/16 1.5620 1.5625 1 7/8 1.8740 1.8734 1.260 .06 .300 1.5621 1.5615 1.5633 1.5629
IR 7344 1 5/8 1.6245 1.6250 1 15/16 1.9364 1.9357 1.010 .06 .249 1.6246 1.6240 1.6258 1.6254
IR 7345 1 5/8 1.6245 1.6250 1 15/16 1.9364 1.9357 1.260 .06 .311 1.6246 1.6240 1.6258 1.6254
IR 7355 D2 1 1/2 1.4995 1.5000 2 1.9989 1.9982 1.260 .06 .490 1.4996 1.4990 1.5008 1.5004
IR 7355 D1 1 9/16 1.5620 1.5625 2 1.9989 1.9982 1.260 .06 .436 1.5621 1.5615 1.5633 1.5629
IR 7355D 1 5/8 1.6245 1.6250 2 1.9989 1.9982 1.260 .06 .380 1.6246 1.6240 1.6258 1.6254 -23
IR 7354 1 11/16 1.6870 1.6875 2 1.9989 1.9982 1.010 .06 .258 1.6871 1.6865 1.6883 1.6879
IR 7355 1 11/16 1.6870 1.6875 2 1.9989 1.9982 1.260 .06 .322 1.6871 1.6865 1.6883 1.6879
IR 8406 1 3/4 1.7495 1.7500 2 1/4 2.2489 2.2482 1.510 .06 .670 1.7496 1.7490 1.7508 1.7504 -24
IR 8407 1 3/4 1.7495 1.7500 2 1/4 2.2489 2.2482 1.760 .06 .781 1.7496 1.7490 1.7508 1.7504 -25
IR 8407 C1 1 7/8 1.8745 1.8750 2 1/4 2.2489 2.2482 1.760 .06 .604 1.8746 1.8740 1.8758 1.8754
IR 8446 1 15/16 1.9370 1.9375 2 1/2 2.4989 2.4982 1.510 .08 .837 1.9371 1.9365 1.9383 1.9379
IR 8447 1 15/16 1.9370 1.9375 2 1/2 2.4989 2.4982 1.760 .08 .975 1.9371 1.9365 1.9383 1.9379 -26
IR 8446 C 2 1.9995 2.0000 2 1/2 2.4989 2.4982 1.510 .08 .754 1.9996 1.9989 2.0010 2.0005 -27
IR 8447 C 2 1.9995 2.0000 2 1/2 2.4989 2.4982 1.760 .08 .879 1.9996 1.9989 2.0010 2.0005
IR 8447 C1 2 1/8 2.1244 2.1250 2 1/2 2.4989 2.4982 1.760 .08 .677 2.1246 2.1239 2.1260 2.1255
IR 8476 2 3/16 2.1869 2.1875 2 3/4 2.7489 2.7482 1.510 .08 .931 2.1871 2.1864 2.1885 2.1880
IR 8477 2 3/16 2.1869 2.1875 2 3/4 2.7489 2.7482 1.760 .08 1.085 2.1871 2.1864 2.1885 2.1880 -28
IR 8476 C 2 1/4 2.2494 2.2500 2 3/4 2.7489 2.7482 1.510 .08 .838 2.2496 2.2489 2.2510 2.2505 -29
IR 8477 C 2 1/4 2.2494 2.2500 2 3/4 2.7489 2.7482 1.760 .08 .976 2.2496 2.2489 2.2510 2.2505
IR 8516 2 3/8 2.3744 2.3750 3 2.9989 2.9982 1.510 .08 1.126 2.3746 2.3739 2.3760 2.3755
IR 8517 2 3/8 2.3744 2.3750 3 2.9989 2.9982 1.760 .08 1.313 2.3746 2.3739 2.3760 2.3755 -30
IR 8516 C 2 1/2 2.4994 2.5000 3 2.9989 2.9982 1.510 .08 .922 2.4996 2.4989 2.5010 2.5005 -31
IR 8517 C 2 1/2 2.4994 2.5000 3 2.9989 2.9982 1.760 .08 1.074 2.4996 2.4989 2.5010 2.5005
IR 8536 2 1/2 2.4994 2.5000 3 1/8 3.1237 3.1228 1.510 .08 1.178 2.4996 2.4989 2.5010 2.5005
IR 8537 2 1/2 2.4994 2.5000 3 1/8 3.1237 3.1228 1.760 .08 1.373 2.4996 2.4989 2.5010 2.5005
IR 9567 D 2 5/8 2.6244 2.6250 3 1/4 3.2487 3.2478 1.760 .08 1.434 2.6246 2.6239 2.6260 2.6255
IR 9567 2 3/4 2.7494 2.7500 3 1/4 3.2487 3.2478 1.760 .08 1.171 2.7496 2.7489 2.7510 2.7505 -32
IR 9568 2 3/4 2.7494 2.7500 3 1/4 3.2487 3.2478 2.010 .08 1.337 2.7496 2.7489 2.7510 2.7505 -33

All dimensions in inches

These inner rings meet Military Standard MS 51962
1) Sorted by outside diameter.

11
 Inner Rings

INNER d F r2 RECOMMENDED SHAFT DIAMETER

Inside Diameter Outside Diameter B
RING Shaft Approx. Slip Fit Press Fit MS
Width
PART Nominal Nominal +.000 Fillet Weight ISO g6 ISO m5 51962
NUMBER 1) Min. Max. 1) Max. Min. -.005 Max. (lbs) Max. Min. Max. Min. suffix

IR 9607 2 15/16 2.9369 2.9375 3 1/2 3.4987 3.4978 1.760 .08 1.41 2.9371 2.9364 2.9384 2.9379
IR 9608 2 15/16 2.9369 2.9375 3 1/2 3.4987 3.4978 2.010 .08 1.61 2.9371 2.9364 2.9384 2.9379 -34
IR 9608 C 3 2.9994 3.0000 3 1/2 3.4987 3.4978 2.010 .08 1.44 2.9996 2.9989 3.0009 3.0004
IR 9647 3 1/8 3.1244 3.1250 3 3/4 3.7487 3.7478 1.760 .10 1.67 3.1246 3.1239 3.1259 3.1254
IR 9648 3 1/8 3.1244 3.1250 3 3/4 3.7487 3.7478 2.010 .10 1.91 3.1246 3.1239 3.1259 3.1254 -35
IR 9648 C 3 1/4 3.2494 3.2500 3 3/4 3.7487 3.7478 2.010 .10 1.55 3.2495 3.2487 3.2511 3.2505 -36
IR 9687 3 3/8 3.3742 3.3750 4 3.9985 3.9976 1.760 .10 1.79 3.3745 3.3737 3.3761 3.3755
IR 9688 D 3 1/4 3.2494 3.2500 4 3.9985 3.9976 2.010 .10 2.42 3.2495 3.2487 3.2511 3.2505 -37
IR 9688 3 3/8 3.3742 3.3750 4 3.9985 3.9976 2.010 .10 2.05 3.3745 3.3737 3.3761 3.3755 -38
IR 9688 C 3 1/2 3.4992 3.5000 4 3.9985 3.9976 2.010 .10 1.66 3.4995 3.4987 3.5011 3.5005
IR 9717 3 1/2 3.4992 3.5000 4 1/8 4.1235 4.1226 1.760 .10 1.85 3.4995 3.4987 3.5011 3.5005
IR 9718 3 1/2 3.4992 3.5000 4 1/8 4.1235 4.1226 2.010 .10 2.12 3.4995 3.4987 3.5011 3.5005
IR 9728 3 1/2 3.4992 3.5000 4 1/4 4.2485 4.2476 2.010 .10 2.58 3.4995 3.4987 3.5011 3.5005 -39
IR 9728 C1 3 3/4 3.7492 3.7500 4 1/4 4.2485 4.2476 2.010 .10 .1.78 3.7495 3.7487 3.7511 3.7505 -40
IR 6768 3 3/4 3.7492 3.7500 4 1/2 4.4985 4.4976 2.010 .10 2.75 3.7495 3.7487 3.7511 3.7505
IR 6769 3 3/4 3.7492 3.7500 4 1/2 4.4985 4.4976 2.260 .10 3.09 3.7495 3.7487 3.7511 3.7505
IR 6769 C 3 7/8 3.8742 3.8750 4 1/2 4.4985 4.4976 2.260 .10 2.62 3.8745 3.8737 3.8761 3.8755
IR 6770 3 3/4 3.7492 3.7500 4 1/2 4.4985 4.4976 2.515 .10 3.44 3.7495 3.7487 3.7511 3.7505 -41
IR 6848 4 3.9992 4.0000 5 4.9985 4.9975 2.010 .10 4.00 3.9995 3.9987 4.0011 4.0005
IR 6849 4 3.9992 4.0000 5 4.9985 4.9975 2.260 .10 4.50 3.9995 3.9987 4.0011 4.0005
IR 6850 4 3.9992 4.0000 5 4.9985 4.9975 2.515 .10 5.01 3.9995 3.9987 4.0011 4.0005 -42
IR 6849 C 4 1/4 4.2492 4.2500 5 4.9985 4.9975 2.260 .10 3.47 4.2495 4.2487 4.2511 4.2505
IR 6918 4 1/2 4.4992 4.5000 5 1/2 5.4985 5.4975 2.515 .10 5.57 4.4995 4.4987 4.5011 4.5005 -43
IR 6919 4 1/2 4.4992 4.5000 5 1/2 5.4985 5.4975 3.015 .10 6.68 4.4995 4.4987 4.5011 4.5005 -44
IR 6922 4 3/4 4.7483 4.7492 5 3/4 5.7483 5.7473 3.015 .12 7.02 4.7494 4.7487 4.7513 4.7506 -45
IR 6925 5 4.9990 5.0000 6 5.9983 5.9973 2.515 .12 6.13 4.9994 4.9985 5.0013 5.0006 -46
IR 6926 5 4.9990 5.0000 6 5.9983 5.9973 3.015 .12 7.35 4.9994 4.9985 5.0013 5.0006 -47
IR 6935 5 1/2 5.4990 5.5000 6 1/2 6.4983 6.4973 2.515 .12 6.68 5.4994 5.4985 5.5013 5.5006 -48
IR 6936 5 1/2 5.4990 5.5000 6 1/2 6.4983 6.4973 3.015 .12 8.01 5.4994 5.4985 5.5013 5.5006 -49
IR 2325 6 5.9990 6.0000 7 1/4 7.2481 7.2469 2.515 .12 9.22 5.9994 5.9985 6.0013 6.0006
IR 2326 6 5.9990 6.0000 7 1/4 7.2481 7.2469 3.015 .12 11.06 5.9994 5.9985 6.0013 6.0006 -50
IR 2425 6 1/2 6.4990 6.5000 7 3/4 7.7481 7.7469 2.515 .12 9.92 6.4994 6.4985 6.5013 6.5006
IR 2426 6 1/2 6.4990 6.5000 7 3/4 7.7481 7.7469 3.015 .12 11.90 6.4994 6.4985 6.5013 6.5006
IR 2526 7 6.9990 7.0000 8 1/4 8.2481 8.2469 3.015 .12 12.73 6.9994 6.9985 7.0013 7.0006
IR 2626 7 1/2 7.4988 7.5000 8 3/4 8.7480 8.7468 3.015 .16 13.57 7.4994 7.4983 7.5015 7.5007
IR 2726 8 7.9988 8.0000 9 1/4 9.2480 9.2468 3.015 .16 14.40 7.9994 7.9983 8.0015 8.0007
All dimensions in inches
These inner rings meet Military Standard MS 51962
1) Sorted by outside diameter.

12
 IN SEARCH of MAXIMUM CAPACITY
The RBC TJ TandemRoller® Bearing

What more capacity will do:

The Tandem Roller Bearing

(TJ-series) solutions.

Increasing the number of rollers

Full complement of rollers

13
 Heavy Duty TJ TandemRoller® Bearings

TJ TandemRoller® Bearing

BEARING Fw D B r1 Housing
PART Inside Diameter Outside Diameter Width Housing Shoulder Dynamic Static
NUMBER +.000 Fillet Dia. Capacity Capacity
1) Nominal Min. Max. Max. Min. +/– 1/64" C (lbs.) CO (lbs.)
–.005 Max.

TJ 75317 7/8 .8759 .8768 1.5000 1.4995 1.063 .015 1 1/4 7,300 10,800
TJ 7194 1 1.0009 1.0018 1.5000 1.4995 1.000 .015 1 5/16 8,000 13,700
TJ 74765 1 1/16 1.0640 1.0649 1.6875 1.6870 1.000 .015 1 7/16 9,500 13,900
TJ 7214 1 1/8 1.1259 1.1268 1.6250 1.6245 1.000 .040 1 3/8 8,500 15,500
TJ 7215 1 1/8 1.1259 1.1268 1.6250 1.6245 1.250 .040 1 3/8 10,600 20,400
TJ 7235 1 1/4 1.2510 1.2519 1.7500 1.7495 1.250 .040 1 9/16 11,300 22,700
TJ 75117 1 3/8 1.3760 1.3769 2.0625 2.0619 1.000 .015 1 3/4 10,100 17,900
TJ 75129 1 1/2 1.5010 1.5019 2.2500 2.2494 1.000 .015 1 7/8 11,300 18,900
TJ 75318 1 1/2 1.5010 1.5019 2.3750 2.3744 1.250 .060 2 15,000 24,400
DTJ 75319 1 1/2 1.5010 1.5019 2.3750 2.3744 2.500 .060 2 25,800 48,900
TJ 7314 1 3/4 1.7510 1.7520 2.3125 2.3119 1.000 .060 2 1/16 11,500 23,900
TJ7315 1 3/4 1.7510 1.7520 2.3125 2.3119 1.250 .060 2 1/16 14,300 31,800
TJ7354 2 2.0011 2.0021 2.5625 2.5619 1.000 .060 2 5/16 12,500 27,700
TJ 7355 2 2.0011 2.0021 2.5625 2.5619 1.250 .060 2 5/16 15,600 36,800
TJ 8446 2 1/2 2.5011 2.5021 3.2500 3.2494 1.500 .080 2 7/8 19,000 46,600
TJ 8447 2 1/2 2.5011 2.5021 3.2500 3.2494 1.750 .080 2 7/8 22,200 56,900
TJ 8476 2 3/4 2.7511 2.7521 3.5000 3.4992 1.500 .080 3 1/8 19,500 49,800
TJ 8477 2 3/4 2.7511 2.7521 3.5000 3.4992 1.750 .080 3 1/8 22,800 60,900
TJ 8516 3 3.0011 3.0023 3.7500 3.7492 1.500 .080 3 3/8 20,900 56,000
TJ 8517 3 3.0011 3.0023 3.7500 3.7492 1.750 .080 3 3/8 24,400 68,500
DTJ 75168 3 1/4 3.2512 3.2524 4.2500 4.2492 4.000 .060 3 3/4 54,500 164,500
TJ 75310 3 5/16 3.3151 3.3160 4.0000 3.9992 1.500 .060 3 5/8 20,900 64,400
TJ 75309 3 5/16 3.3151 3.3160 4.0000 3.9992 1.650 .060 3 5/8 22,900 72,600
TJ 9608 3 1/2 3.5012 3.5014 4.5000 4.4992 2.000 .060 3 7/8 32,800 87,900
TJ 75177 3 13/16 3.8143 3.8157 4.3750 4.3742 1.500 .060 4 18,400 76,000
TJ 75311 4 4.0012 4.0024 4.8125 4.8118 2.125 .060 4 3/8 34,100 116,000
TJ 75176 4 1/16 4.0643 4.0657 4.6250 4.6242 1.500 .060 4 5/16 18,900 81,000
TJ 75312 4 1/2 4.5012 4.5026 5.3125 5.3118 2.080 .060 4 7/8 36,200 127,000
TJ 6769 4 1/2 4.5012 4.5026 6.0000 5.9990 2.250 .100 5 1/4 49,600 119,000
TJ 6770 4 1/2 4.5012 4.5026 6.0000 5.9990 2.500 .100 5 1/4 55,400 137,000
DTJ 75169 4 1/2 4.5012 4.5026 6.0000 5.9990 4.500 .100 5 1/4 85,800 236,000
TJ 74986 5 5.0013 5.0027 6.0000 5.9990 2.000 .100 5 1/2 39,000 135,000
TJ 6849 5 5.0013 5.0027 6.5000 6.4990 2.250 .100 5 3/4 54,000 137,000
TJ 6918 5 1/2 5.5013 5.5027 7.0000 6.9990 2.500 .100 6 1/4 62,000 169,000
TJ 6919 5 1/2 5.5013 5.5027 7.0000 6.9990 3.000 .100 6 1/4 74,200 213,000
DTJ 75170 5 1/2 5.5013 5.5027 7.0000 6.9990 6.000 .100 6 1/4 127,000 425,000
TJ 6926 6 6.0013 6.5029 7.5000 7.4988 3.000 .120 6 5/8 79,300 239,000
TJ 6935 6 1/2 6.5013 6.5029 8.0000 7.9988 2.500 .120 7 1/8 67,500 200,000
DTJ 75166 8 8.0014 8.0032 10.1250 10.1236 7.750 .160 9 1/4 260,000 830,000
All dimensions in inches. See pages 10-12 for available inner rings.
Inquire for sizes not listed. Inner rings must be ordered separately.
1) Prefix DTJ denotes a double row bearing.
14
 Heavy Duty TJ TandemRoller® Bearings

DTJ Double Row TandemRoller® Bearing

Recommended Shaft Diameter Recommended Housing Bore BEARING

Limit ISO h6, use with ISO f6, use with PART
Speed H7 hsg fit N7 hsg fit Slip Fit ISO H7 Press Fit ISO N7 NUMBER
(rpm) Max. Min. Max. Min. Min. Max. Mean Fit Min. Max. Mean Fit 1)

13,000 .8750 .8745 .8742 .8737 1.5000 1.5010 .0007L 1.4987 1.4997 .0006T TJ 75317
11,800 1.0000 .9995 .9992 .9987 1.5000 1.5010 .0007L 1.4987 1.4997 .0006T TJ 7194
11,000 1.0625 1.0620 1.0617 1.0612 1.6875 1.6885 .0007L 1.6862 1.6872 .0006T TJ 74765
10,500 1.1250 1.1245 1.1242 1.1237 1.6250 1.6260 .0007L 1.6237 1.6247 .0006T TJ 7214
10,500 1.1250 1.1245 1.1242 1.1237 1.6250 1.6260 .0007L 1.6237 1.6247 .0006T TJ 7215
9,400 1.2500 1.2494 1.2490 1.2484 1.7500 1.7510 .0007L 1.7487 1.7497 .0006T TJ 7235
8,500 1.3750 1.3744 1.3740 1.3734 2.0625 2.0637 .0009L 2.0610 2.0621 .0006T TJ 75117
7,800 1.5000 1.4994 1.4990 1.4984 2.2500 2.2512 .0009L 2.2485 2.2496 .0006T TJ 75129
7,800 1.5000 1.4994 1.4990 1.4984 2.3750 2.3762 .0009L 2.3735 2.3746 .0006T TJ 75318
7,100 1.5000 1.4994 1.4990 1.4984 2.3750 2.3762 .0009L 2.3735 2.3746 .0006T DTJ 75319
6,700 1.7500 1.7494 1.7490 1.7484 2.3125 2.3137 .0009L 2.3110 2.3121 .0006T TJ 7314
6,700 1.7500 1.7494 1.7490 1.7484 2.3125 2.3137 .0009L 2.3110 2.3121 .0006T TJ 7315
5,900 2.0000 1.9993 1.9988 1.9981 2.5625 2.5637 .0009L 2.5610 2.5621 .0006T TJ 7354
5,900 2.0000 1.9993 1.9988 1.9981 2.5625 2.5637 .0009L 2.5610 2.5621 .0006T TJ 7355
4,700 2.5000 2.4993 2.4988 2.4981 3.2500 3.2514 .0011L 3.2482 3.2496 .0006T TJ 8446
4,700 2.5000 2.4993 2.4988 2.4981 3.2500 3.2514 .0011L 3.2482 3.2496 .0006T TJ 8447
4,300 2.7500 2.7493 2.7488 2.7481 3.5000 3.5014 .0011L 3.4982 3.4996 .0007T TJ 8476
4,300 2.7500 2.7493 2.7488 2.7481 3.5000 3.5014 .0011L 3.4982 3.4996 .0007T TJ 8477
3,900 3.0000 2.9993 2.9988 2.9981 3.7500 3.7514 .0011L 3.7482 3.7496 .0007T TJ 8516
3,900 3.0000 2.9993 2.9988 2.9981 3.7500 3.7514 .0011L 3.7482 3.7496 .0007T TJ 8517
3,300 3.2500 3.2491 3.2486 3.2477 4.2500 4.2514 .0011L 4.2482 4.2496 .0007T DTJ 75168
3,500 3.3125 3.3116 3.3111 3.3102 4.0000 4.0014 .0011L 3.9982 3.9996 .0007T TJ 75310
3,500 3.3125 3.3116 3.3111 3.3102 4.0000 4.0014 .0011L 3.9982 3.9996 .0007T TJ 75309
3,300 3.5000 3.4991 3.4986 3.4977 4.5000 4.5014 .0011L 4.4982 4.4996 .0007T TJ 9608
3,100 3.8125 3.8116 3.8111 3.8102 4.3750 4.3764 .0011L 4.3732 4.3746 .0007T TJ 75177
3,000 4.0000 3.9991 3.9986 3.9977 4.8125 4.8141 .0011L 4.8105 4.8120 .0008T TJ 75311
2,900 4.0625 4.0616 4.0611 4.0602 4.6250 4.6266 .0012L 4.6230 4.6245 .0008T TJ 75176
2,600 4.5000 4.4991 4.4986 4.4977 5.3125 5.3141 .0011L 5.3105 5.3120 .0008T TJ 75312
2,600 4.5000 4.4991 4.4986 4.4977 6.0000 6.0016 .0013L 5.9980 5.9995 .0008T TJ 6769
2,600 4.5000 4.4991 4.4986 4.4977 6.0000 6.0016 .0013L 5.9980 5.9995 .0008T TJ 6770
2,300 4.5000 4.4991 4.4986 4.4977 6.0000 6.0016 .0013L 5.9980 5.9995 .0008T DTJ 75169
2,400 5.0000 4.9990 4.9983 4.9973 6.0000 6.0016 .0013L 5.9980 5.9995 .0008T TJ 74986
2,400 5.0000 4.9990 4.9983 4.9973 6.5000 6.5016 .0013L 6.4980 6.4995 .0008T TJ 6849
2,100 5.5000 5.4990 5.4983 5.4973 7.0000 7.0016 .0013L 6.9980 6.9995 .0008T TJ 6918
2,100 5.5000 5.4990 5.4983 5.4973 7.0000 7.0016 .0013L 6.9980 6.9995 .0008T TJ 6919
1,900 5.5000 5.4990 5.4983 5.4973 7.0000 7.0016 .0013L 6.9980 6.9995 .0008T DTJ 75170
2,000 6.0000 5.9990 5.9983 5.9973 7.5000 7.5018 .0015L 7.4976 7.4994 .0009T TJ 6926
1,800 6.5000 6.4990 6.4983 6.4973 8.0000 8.0018 .0015L 7.9976 7.9994 .0009T TJ 6935
1,350 8.0000 7.9989 7.9980 7.9969 10.1250 10.1270 .0017L 10.1224 10.1244 .0009T DTJ 75166
1) Location and number of lubricating
holes may differ

15
 TECHNICAL DATA
1. Introduction

The methods, equations, and technical data presented in this section should be sufficient to
select the correct bearings and estimate their performance for a wide range of applications.
For applications with severe or unusual operating conditions, RBC is prepared to provide an
in-depth analysis and recommend the most suitable bearing arrangement. Where standard
bearings cannot be used, RBC can meet the application requirements with a special bearing
design, specifically tailored for optimum performance.

2. Capacity and Fatigue Life of Roller Bearings

DYNAMIC CAPACITY C [lbf,N], or “basic load rating” for a roller bearing is that calculated,
constant, radial load, which a group of apparently identical bearings with a stationary outer
ring can theoretically endure for a fatigue life of 106 revolutions of the inner ring.

STATIC CAPACITY CO [lbf,N], or “static load rating” is that uniformly distributed static
radial load, which produces a maximum theoretical contact stress of 4000 MPa (580,000 psi).

FATIGUE LIFE, L10 [rev, hrs], is a statistical measure of the life which 90% of a large group
of apparently identical bearings will complete or exceed. For a single bearing, L10 also refers
to the life associated with 90% reliability.
Median Life, L50 is usually not more than five times L10.

The relationship between rating life, capacity and load is:

(1)

(2)

The equations are valid in the range of approximately 100 hrs to 100,000 hrs of life. At the
low end, extreme loads or speeds may adversely affect life, at the high end, metal fatigue may
never be a factor in bearing service life.

2.1 Required Bearing Load Capacity

Solving eq.(2) for the dynamic capacity C, we find:

(3)

Use for applications, where a bearing must last a certain number of hours under given load
and speed conditions.
Normally, bearings with rigidly mounted outer rings can support static loads up to the static
capacity without detriment. The static load limit may also be used to evaluate momentary
shock loads in dynamic applications and the maximum load at very slow rotation or
oscillation, e.g.:
(4)
d is the bearing inside diameter [in])

16
2.2 Adjustments to Bearing Capacity

2.2.1 Raceway Hardness

The capacities given in the dimensional table are valid only if all load carrying bearing
components are properly heat treated to a minimum hardness of HRc 58. The equivalent
strength of material is approximately 300,000 psi. In applications without an inner ring, the
shaft becomes an integral bearing component.

If one or more bearing components possess a hardness of less than HRc 58, both dynamic and
static capacities must be reduced by factors given in table 1. A hardness of less than HRc 40
is not recommended.

The adjusted bearing capacities C’ and C’O become

Adjusted dynamic capacity: C’ = fHD * C (5)

Adjusted static capacity: C’O = fHS * CO (6)

2.2.2 Operating Temperature

RBC roller bearings without seals and metallic cages are heat stabilized and may be used at
operating temperatures between -40° F (-40°C) and +300° F (150° C) with no loss of capacity.
Where applicable, temperature limits of seals, cage, and lubricant must be considered.

Successful operation at higher temperatures requires a different heat treatment, which

reduces hardness proportionally. Alternatively, more temperature resistant bearing mate-
rials can be substituted. Consult with RBC Engineering for recommendations and hot
hardness factors.

Hardness Hardness Dynamic Static

HRc HV fHD fHS

58 655 1.00 1.00

56 617 .88 .99
54 580 .77 .97
52 545 .67 .94
50 513 .59 .90
48 485 .51 .85
46 458 .43 .76
44 435 .37 .68
42 413 .31 .60
40 393 .26 .55

Table 1. Capacity reduction factors

2.3 Thrust Capacity of Radial Cylindrical Roller Bearings

Depending on internal design and operating conditions, cylindrical roller bearings can
support considerable thrust loads, which makes them suitable for use as locating bearings.
The main design criterion is the length to diameter ratio of the roller itself. Bearings equipped
with roller lengths more than 2.5 times the diameter are called needle roller bearings and
should not be used to support thrust loads.

The maximum permissible thrust load is given as a percent of the actual radial load applied
and depends on speed and lubrication conditions. It is generally safe to allow a dynamic
thrust load equal to 10% of the radial load.

17
 2.4 Adjustments to Fatigue Life

If bearing design and operation deviate significantly from normal, it may be necessary to use
additional factors to estimate the fatigue life Lna
Lna = a1 * a2* a3 * L10 (7)
where Lna = adjusted rating life [hrs, rev]
a1 = reliability factor (see table 2)
a2 = material factor
a3 = user operating factor

Reliability % Ln Reliability Factor a1

90 L10 1
95 L5 0.62
96 L4 0.53
97 L3 0.44
98 L2 0.33
99 L1 0.21

Table 2. Reliability Factors, a1

The materials and bearing technology factor a2 = 1 for standard bearings. Adjustment factor
a3takes into account unusual or extreme operating conditions such as shock loads, misalign-
ment, and lubrication. RBC rollers are crowned to reduce the danger of roller end loading
and to allow for misalignment of up to 4' (0.0012 in/in). Greater misalignment or moment
loading result in stress concentrations, which may reduce the rating life significantly.
Consult with RBC for a detailed analysis.

3. Equivalent bearing speed and load

3.1 Mean effective bearing speed

A mean effective bearing speed ne [rpm] must be calculated for bearings subject to variable
loads and speeds within a duty cycle. It is the weighted average of all individual speed
components.

∑( 100 )
ni * t i
ne = (8)
n1 * t 1 n2 * t 2
= + + ... where ni = individual speed [rpm]
100 100
ti = time interval in [%] of total time
3.2 Equivalent bearing load

The general equation to compute the equivalent bearing load Pe is:

q q

Pe = Σ ne * 100
Fi * n i * t i
( ) (9)

q q
Fi * n i * t i F2 * n 2 * t 2
= + +...
ne * 100 n e * 100
In the special case of constant speed this equation reduces to:
q q

P =
e Σ(F100
*t
i
)
i
(10)

q q q where q = 10/3 for roller bearings

Fi * t i F2 * t 2
= + +... Fi = individual radial load [lbf,N]
100 100

18
If the bearing is subject to repeated shock or impact loads, the equivalent load Pe or its
individual components should be multiplied by a suitable shock load factor. The product
of load and shock load factor should not exceed the bearing static capacity to prevent
brinelling of raceways and rollers.

Loading Shock Load Factor

Uniform and constant 1.00

Variable and light shock 1.50
Vibration and moderate shock 2.00
Heavy and severe shock 3.00

Table 3. Load Modification Factors

4. Limiting Speed

The limiting speed values in the dimensional tables apply to bearings lubricated with oil of
proper viscosity, operating under low to medium load. Poor cooling conditions, bearing
misalignment, and improper diametral bearing clearance will cause the bearing to heat up
and reduce the maximum permissible speed. Grease lubricated bearings should not exceed
65% of the values given in the tables. The maximum speed of bearings with contacting lip
seals is generally limited to a lip surface speed of 1000 ft/min.

5. Shaft & Housing Fits

The dimensional tables list loose and interference fits for inner and outer rings. The correct
fit depends on type and severity of the load. To prevent rotation and wear, the ring subject
to rotating loads must be press fitted. This will be the inner ring in most applications. The
ring subject to a stationary load may be loosely fitted.

The housing interference fit ISO N7 given in the tables covers most applications with normal
loads to 25% of dynamic capacity and light to moderate shock loads. Higher loads, or heavy
shock loads, or thin-walled housings may require a tighter interference fit, e.g. ISO P7.

Likewise, loads above 25% of dynamic capacity, or heavy shock loads, or a hollow shaft may
require a shaft interference fit per ISO n6. To determine tolererances per P7 or n6, proceed
as follows: The nominal housing bore is the maximum bearing outside diameter, the nominal
shaft diameter is the maximum inner ring inside diameter. Find the nominal housing bore
diameter or shaft diameter respectively in table 4 and add the tolerances to the nominal
dimension.

Nominal Upper & Lower Nominal Upper & Lower

Bearing OD Tolerance Inner RingID Tolerance
Range[in] ISO P7 Range[in] ISO n6

3/4 - 1 1/8 -.0006 -.0014 1/2 - 11/16 +.0009 +.0005

1 3/16 - 1 15/16 -.0007 -.0017 3/4 - 1 1/8 +.0011 +.0006
2-3 -.0008 -.0020 1 3/16 - 1 15/16 +.0013 +.0007
3 1/4 - 4 1/2 -.0009 -.0023 2-3 +.0015 +.0008
4 3/4 - 7 -.0011 -.0027 3 1/4 - 4 1/2 +.0018 +.0009
7 1/8 - 9 3/4 -.0013 -.0031 4 3/4 - 7 +.0020 +.0011
10 - 12 3/8 -.0014 -.0035 7 1/8 - 9 3/4 +.0024 +.0012
12 1/2 - 15 5/8 -.0016 -.0039 10 - 12 3/8 +.0026 +.0013

Table 4. Housing tolerance P7 and shaft tolerance n6

19
 Due to lower stiffness, bearing inner and outer rings usually conform to the shape of shaft
and housing bore respectively, with little attenuation of taper and out-of-roundness. The
quality of user supplied mounting surfaces must therefore be sufficient for the intended
application.

The bearing operating clearance should be checked in cases where both inner and outer rings
are press fitted or where a large temperature gradient exists between shaft and housing.

The user supplied shaft is an integral part of bearings without an inner ring and must meet
at least the minimum requirements for rolling element bearings: Surface hardness of HRc
58 min, surface finish 16 rms, through hardened or surface hardened 0.030 to 0.050" deep (this
figure depends on bearing dimensions and load) with sufficient core hardness, roundness
and taper tolerance less than 50 % of the diameter tolerance.

6. Lubrication

Lubricants serve very important purposes in rolling element bearings, they

• protect bearing surfaces from rust and corrosion.

• reduce rolling and sliding friction.
• prevent metal-to-metal contact between rollers and raceways.
• carry heat out of the bearing contact area.
• form a barrier (grease) against external contaminants.
• remove wear particles from the bearing.

Lack of lubrication or inadequate lubrication is probably the single most common cause of
bearing failure.

6.1 Grease Lubrication

The following check list may be helpful in grease selection:

• Suitability for the expected operating temperature and speed. Select a

lower NLGI grade for low temperature operation.

•Compatibility with other greases, oils, and rust preventatives. To be

compatible, products usually must have the same type oil and thickener.

•Load carrying ability. Some high temperature greases may significantly

reduce bearing load capacity.

•Resistance to water and other contaminants. Balance water repellent

properties against water emulsifying and water soluble properties. Note,
a water repellent grease may not be able to protect the bearing surfaces
against condensation and water, which has breached the grease barrier.

•Required additives for extreme pressure (EP), aging and oxidation resis-
tance.

Historically, greases based on different thickeners had distinctly different properties with
respect to operating temperature and behavior towards water. However, modern com-
pounding technology has improved on many of the initial limitations and blurred the
distinctions. The most widely used general purpose bearing grease today is a Lithium based,
mineral oil type, water emulsifying grease, NLGI grade 2, with EP and other additives.

It takes relatively little lubricant to maintain an adequate lubricating film. In many

applications, relubrication every 10 - 20,000 hrs would be sufficient for that purpose alone.

20
In those cases where the lubricants primary function is to protect the bearing from con-
tamination, the relubrication period must be adjusted to maintain a protective barrier at all
times. There are no fixed rules as to how often relubrication should take place, it is
strictly a function of the environmental conditions. The harsher the operating conditions, the
shorter the relubrication period. A visual examination of the bearings may indicate the
need for more grease when much of the grease collar in the seal area has been lost.

The maximum recommended quanitity of grease in a roller bearing is a function of operating

speed. Pumping a high speed bearing full of grease will cause overheating, possibly grease
loss after melting, and eventual bearing failure due to lack of lubricant. Table 5 provides a
guideline for grease fill as a percent of free interior bearing space versus the operating speed
n as a percent of limiting speed nL. Visual examination of the bearing for compliance is
sufficient.

Operating Percent of Grease fill

speed n speed limit nL % of free space

slow n <= 10% nL 100%

medium 10% < n < 20% nL 50%
high n >= 20% nL 10%
very high n >= 65% nL (oil lube required)

Table 5. Recommended grease volume.

6.2 Oil lubrication

The more demanding bearing applications involving high operating speed, high tempera-
tures, heat generation, need for minimum friction, etc., usually require oil lubrication.

As with grease, the primary concern when selecting an oil is its suitability for the expected
operating temperature. If the viscosity at operating temperature is too low, a hydrodynamic
lubricating film between rollers and raceways will be too thin to prevent metal to metal
contact and the adjusted bearing life will be less than the theoretical L10 life. Likewise, good
separation of the bearing components by a thick lubricant film can more than double the L10
life.

The minimum oil viscosity at operating temperature should not fall below 12 cSt. The
following equation can be used for a first estimate of the film parameter Ω for needle roller
bearings type SJ:

Λ = 1.6 * 10-4 * (ν*n)0.71 * F1.11 (11)

with ν = viscosity @ operating temperature [cSt]

n = bearing speed [rpm]
F = inner raceway diameter [in]

A film parameter Λ > 1 enhances fatigue life, Λ < 1 shortens fatigue life.

In oil sump lubrication systems, the oil level at rest should not cover more than half the
diameter of the lowest roller. Bearings subject to heavy loads and speeds may develop so
much heat that a recirculating oil system must be used to remove excess heat. Bearings
operating near the speed limit or beyond should be lubricated with oil mist.

21
 TYPICAL APPLICATIONS

Hoist Drum Shaft — The long slender shaft of such an

application is another point with inherent misalign-
ment and deflection. Pitchlign ® bearings are indi-
cated to maintain its free-rolling, high capacity opera-
tions under adverse conditions.

Pumping Units — Center iron and equalizer applica- Sheave Blocks — Crown
tions, with oscillating service is best served by Pitchlign® blocks and traveling blocks of
bearings. With the properly controlled and spaced portable drilling equipment
rollers, creepage of the rollers and cage occur to mini- use Pitchlign® bearings for ease
mize fretting corrosion and friction oxidation. of assembly, ease of lubrica-
tion and compactness com-
bined with minimum friction
and dependable service.

Steel Mill Equipment — Pipe handling tables use

Pitchlign® bearings for maximum capacity, mini-
mum friction, compactness, ease of lubrication and
maintenance-free service.

22
 Gear Pumps — Higher pressures and speeds of today’s Paper Converting Machines — To maintain today’s fabu-
efficient gear pumps, more than ever demand an individu- lous output of paper converting machinery, Pitchlign®
ally controlled roller design of a bearing such as Pitchlign®. bearings are used on the eccentrics and main bearings of
The deflection due to the high internal hydraulic loading, paper punch presses where they withstand speed, heavy
together with the inherent problem of alignment cannot be impact and shaft deflection.
taken care of by any other type bearing.

Machine Tools — One such application is the planet gears and mainshaft bearings of a clutch drive of a mechanical press.
Pitchlign® bearings are ideally suited for planet gear applications where centrifugal force and torsional deflection of the planet cage
is present. Pitchlign® bearing cages are supported by the integral outer ring flanges, maintaining proper guidance of individual
rollers, regardless of the centrifugal force.

Textile Machinery — Calender rolls, where space is a

problem, is another place where the Pitchlign® bearing
with its maximum capacity, minimum size and thrust free
operation fulfills all requirements. The sealed Pitchlign®
bearing also assures stain-free batts.

23
 Power Transmission — In gear boxes and transmissions of
all types, the Pitchlign® bearing is used due to its maximum
capacity, minimum size and thrust free service. The sealing
feature of the sealed Pitchlign® bearing simplifies design,
assembly and inventory of parts.

Pitchlign® Aircraft Bearing applied to the horizontal hinge of an

early model helicopter rotor. The shaft, being cantilevered,
introduces a severe deflection problem. The Pitchlign® bearing,
with its individually controlled rollers prevents skewing and
locking even with the severe end loading present.

Pitchlign® Aircraft Bearing mounted in a universal joint type

design of intersecting horizontal and vertical hinges of a helicop-
ter. The minimum dimensions and maximum capacity plus the
creepage of the rollers and cage under oscillating service makes
the Pitchlign® bearing an ideal bearing for such applications.

24
25
26
27
 RBC Bearings
One Tribology Center
102 Willenbrock Rd.
Oxford, CT 06978
800.390.3300
Fax: 609.882.5533
28
29
 Innovation. Commitment. Quality.
RBC Bearings has been producing bearings in the USA since 1919. In addition to unique custom bearings, RBC offers a
full line of standard industrial and aerospace bearings, including:

Spherical Plain Bearings Rod Ends

Radial, angular contact, extended inner Commercial and industrial, precision,
ring, high misalignment. QuadLube®, Mil-Spec series, self-lubricating, and
ImpactTuff®, SpreadLock® Seal, aircraft. Sold under the Heim®, Unibal®,
CrossLube®, DuraLube™, MillTuff™ and Spherco® brands. Available in inch
bearings, and self-lubricating bearings. and metric sizes.
Available in inch and metric sizes.

Thin Section Ball Bearings Ball Bearings

Standard cross sections to one inch. Precision ground, semiground,
Sizes to 40 inches. Stainless steel and unground. High loads, long life, smooth
other materials are available. Seals are operation. Nice™ ball bearings are
available on all sizes and standard cross offered in caged and full complement
sections. configurations.

Self-Lubricating Bearings Cam Followers

Radial, thrust, rod ends, spherical Standard stud, heavy stud, yoke type,
bearings, high temperature, high loads. caged roller followers. Patented RBC
Available in inch and metric sizes. Roller® cylindrical roller cam followers,
Fiberglide® self-lubricating bearings. HexLube® universal cam followers,
airframe track rollers.

Airframe Control Bearings Needle Roller Bearings

Ball bearing types, self-lubricating types, Pitchlign® caged heavy duty needle
needle roller track rollers. roller bearings, inner rings, TJ
TandemRoller® bearings for long life.

Dowel Pins, Loose Tapered Roller and

Needle Rollers, Shafts Thrust Bearings
Precision Products dowel pins, loose Tyson® case-hardened and through-
needle rollers, and shafts. hardened tapered roller bearings. RBC
tapered thrust bearings. Available in
many sizes. Used in Class 8 heavy
truck and trailer wheel bearings,
gearboxes, and final drive transmissions.

Ball Screws Specials

Precision ground, rolled, ball splines. RBC manufactures many specialty
Long life, low wear, high accuracy. bearings for the aerospace, oil and
QuickTurn® Ball Screw Repair Service. energy, semiconductor equipment,
packaging, heavy truck, and other
industries.

Authorized RBC Distributor

www.rbcbearings.com
800.390.3300

RBC 6/06