MILL TEST CERTIFICATE Jindal Stainless Limited.

(INSPECTION CERTIFICATE) IS 15997

Jajpur,Odisha
In Accordance with EN 10204 :2004 Type 3.1

CM/L-5200040773
f3c919jtkMDE5NTExOTI=
CUSTOMER :ACCURATE METALS & ALLOYS LLP CERTIFICATE NO. :JSL-7011/QA/2024-25/DOM/01951192
CITY :Mumbai DATE :29.08.2024 VEHICLE NO. :MH06BW0792
P.O.NO. :AMA/AYLS/PPP/28TH AUG PO DATE:28.08.2024 Ref. MTC No. :JSL-JRD/QA/2024-25/DOM/01942647
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0586453112
SHIPMENT/DELIVERY NO. :6500088888 NET WT(MT) :4.870

Material Description/Product Grade / Type Material Specifications Process-Route

STAINLESS STEEL JT JSL PRODUCT STANDARD, IS 15997:2012 AMD. 1 EF-AOD-LRF-CCS

PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 U071231205 0001064726 4.870 12402495 3.000 1,250.00 COIL N1 Mill Edge PRIME

CHEMICAL ANALYSIS (LADLE)

HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
12402495 0.113 9.95 0.006 0.077 0.40 0.82 14.22 0.143 - 0.67 - - -

MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE

Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm

1 486 - 910 45 - - 95 / 96 -

ADDITIONAL INFORMATION

1)- MATERIAL ALSO CONFIRM TO IS 15997:2012 AMD. 1 GRADE N7.

* THE ABOVE MATERIAL FULLY CONFORMS TO IS 15997:2012 AMD. 1 CHEMICAL & MECHANICAL PROPERTIES OF
PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED
IN BIS CERTIFICATION.
HOT ROLLED FINISHES : (BL, ANN, N1, 1D, CHQ) & COLD ROLLED FINISHES: (2E, 2D, 2B, BA, NO.4, HL)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".

Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in accordance ISO 9001 : 2015
Kalinga Nagar Industrial Complex, with requirements of the material specification and has been found to meet the requirements of order. ISO 14001 : 2015
PO: Danagadi , Jajpur ISO 45001 : 2018
Odisha - 755026, India. The material supplied under this Test Certificate is free from any radioactive contamination as checked ISO 50001: 2018
TEL :+91-9078899031, by procedures established by Jindal Stainless Limited as per the recommendations provided by AERB. IATF 16949 : 2016
FAX :+91-06726-266006 CERTIFIED COMPANY
Email: [email protected] Format Ref: JSLO/F/QA-CRM/32 Rev.01
Eff Date: 24/09/2021

Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1