Scribd
Upload
48 views5 pages

Wind Load of Roof Truss

The document provides detailed specifications and load calculations for a roof truss, including dimensions, dead loads, live loads, and wind loads. Key figures include a total dead load of 30,826.46 N, a live load of -7,885.13 N, and wind loads of 56.26 KN per panel point. The calculations summarize the loads on intermediate and end panel points.

Uploaded by

Razi Anwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
48 views5 pages

Wind Load of Roof Truss

The document provides detailed specifications and load calculations for a roof truss, including dimensions, dead loads, live loads, and wind loads. Key figures include a total dead load of 30,826.46 N, a live load of -7,885.13 N, and wind loads of 56.26 KN per panel point. The calculations summarize the loads on intermediate and end panel points.

Uploaded by

Razi Anwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

HEIGHT OF TRUSS 6.

00 m
SPACING OF TRUSS 7.50 m
SPAN 7.50 m
LENGTH OF TOP CHORD 7.08 m
NO OF PANEL POINTS 2
SPACING OF PURLIN 2.36 m
SLOPING AREA OF ROOF TRUSS 106.13 sq.m
PLAN AREA OF ROOF TRUSS 56.25 sq.m
NO OF PURLINS 8
SLOPE OF TOP CHORD 58.02 deg

LOAD CALCULATIONS
DEAD LOAD :
SELF WEIGHT OF AC 200.00 N/m2
SELF WEIGHT OF PURLIN 160.00 N/m

SELF WEIGHT OF SHEET ON PLAN AREA 21226.46 N


SELF WEIGHT OF PURLIN 9600.00 N

TOTAL DEAD LOAD 30826.46 N


DEAD LOAD ON EACH PANEL POINT 15413.23 N 15.41 KN
DEAD LOAD ON END POINT 7706.61 N 7.71 KN

LIVE LOAD :
Imposed load on truss -210.48 N/m2
Live load on the truss -7885.13 N
Live load on each panel point -3942.57 N -3.94 KN
Live load on end panel point -1971.28 N -1.97 KN

WIND LOAD :
design wind speed (Vz) 44.00 m/s TABLE 1 IS875 (PART 3)
Vz = Vb × K1× K2×K3xK4
K1 1.00 table 1
K2 1.00 table 2
K3 1.00 cl.5.3.3
K4 1.15
Vz = Vb × K1× K2×K3 xK4 50.60 m/s
Kd 0.9
Ka 0.852
Kc 0.9

Design wind pressure 1060.17 N/m2

Wind load F on building F = (Cpe ± Cpi) Pz Cl.6.2.1, IS 875

Cpe is found by interpolation

Assuming wind normal to the ridge


Angle (α) Windward side Leeward side
10 -1.10 -0.6
58.0240325035797 ? ?
20 -0.70 -0.5

Cpe for Windward side 0.82


Cpe for leeward side -0.50

Net pressure calculation


For windward side slope
1 1.02 P
2 -0.70 P
For leeward side slope
1 -0.30 P
2 0.62 P

Assuming wind parallel to the ridge


Angle (α) Windward side Leeward side
10 -0.80 -0.6
58.02403 ? ?
20 -0.80 -0.6

Cpe for Windward side -0.80


Cpe for leeward side -0.60

Net pressure calculation


For windward side slope
1 -0.60 P
2 -0.80 P
For leeward side slope
1 -0.40 P
2 -1.00 P

maximum value from all values -1.00 P


INTENSITY OF WIND 1060.17 N/m2
Total wind pressure = sloping area ×
intensity of wind 112518.63 N
Wind load per panel point 56259.31 N 56.26 KN
Wind load per END point 28129.66 N 28.13 KN

Dead load, live load and wind load per panel point are summarized in Table 1.

Load on each
intermediate Load at end
Loads panel point (KN) point (KN)
Dead load (DL) 15.41 7.71
Live load (LL) -3.94 -1.97
Wind load (WL) 56.26 28.13

M= 337.56
kN.m

You might also like