THE GEOTHERMAL CONCEPT

A HOMEOWNER’S GUIDE TO GEOTHERMAL HEATING AND COOLING COMFORT SYSTEMS

 The Global Leader
For more than 50 years ClimateMaster has serviced the
needs of the commercial and residential construction industry
worldwide with the most comprehensive line of water source
and geothermal heat pumps available anywhere.

ClimateMaster’s state of the art facilities in Oklahoma

City, Oklahoma reflects the company’s commitment to its
customers, employees and products. The company stresses
quality in its modern 610,000 square foot facilities through
extensive quality control programs.

A total commitment to excellence is why ClimateMaster is

the world’s leader in design and manufacture of water source
and geothermal heat pumps. We build quality heat pumps for
life... the life of buildings and the people who use them.

Visit us at climatemaster.com to learn more about geothermal

heating and cooling systems.

Homeowners across North America are searching for better

ways to get more out of their energy dollar. Many have
found that the geothermal heat pump can help. Geothermal
energy not only costs less to operate than any other heating
and cooling system, but it also helps preserve our natural
resources and lessens our dependency on fossil fuels.

This brochure has been developed as a guide to introduce

you to geothermal technology. Using a question and answer
format, we’ve tried to provide you with the most popular
topics requested by consumers.

2
Table of Contents:
What is a geothermal heat pump? 4
How is a geothermal heat pump like a refrigerator? 5
Geothermal heat pumps: closed-loop systems 6
Geothermal heat pumps: open-loop systems 8
Geothermal heat pumps: parts of the system 9
Geothermal heat pumps: the major benefits 11
Geothermal heat pumps: Questions 12
Glossary 14

3
 What is a Geothermal Heat Pump?
Q: What is a geothermal heat pump?
A: A geothermal or “ground-source” heat pump is an electrically powered
device that uses the natural heat storage ability of the earth and/or the
earth’s groundwater to heat and cool your home or business.

Q: How does it work?

A: Like any type of heat pump, it simply moves heat energy form one place
to another. Your refrigerator works using the same scientific principle. (See
“How is a geothermal heat pump like a refrigerator?” on page 6.) By using
refrigeration, the geothermal heat pump removes heat energy stored in the
earth and/ or the earth’s groundwater and transfers it to the home.

Q: How is heat transferred between the earth and the home?

A: The earth has the ability to absorb and store heat energy. To use that stored
energy, heat is extracted from the earth through a liquid medium (water or an
anti-freeze solution) and is pumped to the heat pump heat exchanger. There,
the heat is used to heat your home. In summer the process is reversed and Tranquility 27™ Vertical Geothermal Heat Pump with Earth-
Pure® Zero Ozone Depletion Refrigerant
indoor heat is extracted from your home and transferred to the earth through the
liquid.

Q: You mentioned heating and cooling. Does it do both?

A: One of the things that makes a heat pump so versatile is its ability to be a heating and cooling system in one. You can
change from one mode to another with a simple flick of a switch on your indoor thermostat. Plus, a geothermal heat
pump can assist in heating hot water year-round.

Q: Do I need separate ground loops for heating and cooling?

A: No. The same loop works for both. All that happens when changing from heating to cooling, or vise versa, is that the
flow of heat is reversed inside
the unit.

Q: What types of loops are available?

A: There are two main types: open and closed. Both of these loops will be addressed later in the brochure.

Q: Does the underground pipe system really work?

A: The buried pipe, or “ground
loop”, is the biggest technical
advancement in heat pump
technology to date. The idea
to bury pipe in the ground to
gather heat energy began in
the 1940s. But it’s only been
in the last twenty-five years
that new heat pump designs
and improved pipe materials
have been combined to make
geothermal heat pumps the
most efficient heating and
cooling systems available.

4
How is a Geothermal Heat Pump like a refrigerator?
Like a refrigerator, a geothermal heat pump simply transfers heat from one place to another. When a refrigerator is
operating, heat is being carried away from the inside food storage area to the outside, your kitchen. Therefore, cooling
is not being added to the inside; heat is being taken out.
To understand the operation of a geothermal heat pump, it helps to understand how a refrigerator works. A
refrigerator uses a refrigeration circuit with four main components, a compressor (1), a condenser (2), an expansion
device (3), and an evaporator (4). Refrigerant (sometimes referred to by the brand name Freon) is pumped through the
circuit to transfer heat from the inside of the refrigerator to the outside.
The compressor (1) is the pump. It also pressurizes the refrigerant gas. Since temperature and pressure are directly
related, as the pressure increases, the temperature increases. The high temperature/high pressure gas flows from the
compressor to the condenser (2). The cooler air in the kitchen (relative to the temperature of the refrigerant, 150 to
180°F [65 to 85°C]) causes the refrigerant to condense into a liquid. When two surfaces at different temperatures
touch (or are very near – separated only by tubing), the hotter surface cools and the cooler surface warms. This is a
law of physics called the second law of thermodynamics. The condenser therefore releases heat to the kitchen.
The next step in the process involves the expansion device (3). The expansion device is a small orifice that the
refrigerant is forced through. The small hole creates a pressure differential between the two sides of the device. Think
of an expansion device like a dam on a river with a hole in the dam. The water leaking through the hole is at a low
pressure on the downstream side; the water on the other side (being held back by the dam) is at a high pressure.
Once again, the pressure/temperature relationship (lower pressure/lower temperature) creates a cold, low pressure
liquid refrigerant that gets fed to the evaporator (4).
As warm air inside the refrigerator (relative to the very cold temperature of the refrigerant ) passes through the
evaporator coil (4), the hotter surface (air inside the refrigerator) gets cooler and the cooler surface (refrigerant in
the evaporator (4) tubing) gets warmer. The liquid refrigerant evaporates back into gas form, and the cycle starts
over again as the refrigerant enters the compressor (1). The evaporator therefore absorbs heat from the inside of the
refrigerator, which keeps the food cold.
An air conditioner or refrigerator transfers heat in only one direction. A heat pump can transfer heat in two directions,
thereby heating or cooling the space. Most heat pumps heat or cool the air. Some heat pumps heat or chill water. An
additional component, a reversing valve, is added to a heat pump, which allows the refrigerant to change direction,
allowing the space that was being cooled to be heated.
3
Front
A geothermal heat pump has a compressor, a condenser, an
expansion device, and an evaporator like a refrigerator, but also
includes a reversing valve to allow both heating and cooling. The HOT
big difference between a refrigerator or traditional air conditioner
and a geothermal heat pump is the way heat is transferred. A
geothermal heat pump transfers heat between the refrigerant
circuit and the ground instead of between the refrigerant circuit 4
and the air. The ground is a much milder heat source, since the 2
temperature changes very little over the course of the year. The
outside air temperature, however, varies significantly over the year,
making a geothermal heat pump much more energy efficient than
a traditional air conditioner or heat pump. A geothermal heat pump
compressor also operates at lower pressures because of the milder COLD
heat source/heat sink (the ground), helping provide longer life
expectancies.
A geothermal heat pump is a like a refrigerator in many ways.
Simple refrigerator technology coupled with the stable temperature
of the Earth provides quiet, reliable, and energy efficient heating 1
and cooling systems for today’s discerning homeowners.

5
 Geothermal heat pumps: closed-loop systems
Q: What is a closed-loop system?
A: The term “closed-loop” is used to describe
a geothermal heat pump system that
uses a continuous loop of special buried
plastic pipe as a heat exchanger. The
pipe is connected to the indoor heat
pump to form a sealed, underground loop
through which water or an anti-freeze
solution - depending on where you live - is
circulated. Unlike an open-loop system that
consumes water from a well, a closed-loop
system recirculates its heat transferring
solution in pressurized pipe.

Q: Where can this loop be located?

A: That depends on land availability and
terrain. Closed-loops are trenched
horizontally in yards adjacent to the home
if the yard is large enough. Or, for smaller
yards, the loops can be installed vertically An example of a vertical loop installation
using a drill rig, much like a water well installation.

Q: How deep and long will my horizontal trenches be?

A: Trenches are normally four to six feet deep [1.2 - 1.8 meters]. One of the advantages of a horizontal loop system is
being able to lay the trenches according to the shape of the land. As a rule of thumb, 125 - 300 feet of trench are
required per ton of heat pump capacity [11 - 27 meters per kW of capacity].

Q: How many pipes are in a trench?

A: Anywhere from 1 to 6 pipes per trench may be used, depending upon the optimal design for the yard. More pipe per
trench shortens the total amount of trench required.

Q: What if I don’t have enough room for a

horizontal loop?
A: Closed-loop systems can also be vertical.
Holes are bored to about 150 - 300 feet per
ton of heat pump capacity [13 - 27 meters
per kW of capacity]. U-shaped loops of pipe
are inserted in the holes. The holes are then
back-filled with a sealing solution (grouting
material).

Q: How long will the loop pipe last?

A: Closed-loop systems should only be
installed using the appropriate high-density
polyethylene pipe. Properly installed, these
pipes will last over 50 years. They are inert
to chemicals normally found in soil and have
good heat conducting properties. PVC pipe
should not be used under any circumstances.
An example of a horizontal loop installation

6
Q: How are the buried pipe sections of
the loop joined?
A: The only acceptable method to connect
pipe sections is by thermal fusion. Pipe
connections are heated and fused
together to form a joint stronger than
the original pipe. Mechanical joining of
underground pipe for an earth loop is
never an accepted practice. The use of
barbed fittings, clamps and glued joints
is certain to result in loop failure due to
leaks.
Q: Will an earth loop affect my lawn or
landscape?
A: No. Research has proven that loops
have no adverse effect on grass, trees or
shrubs. Most horizontal loop installations
use trenches about 3 feet [1 meter] or
less wide. This, of course, will leave An example of a pond loop installation
temporary bare areas that can be restored with grass seed or sod. Vertical loops require little space and result in
minimal lawn damage.

Q: Can I reclaim heat from my septic system disposal field?

A: No. Depending upon your geographic location, an earth loop will reach temperatures below freezing during extreme
conditions and may freeze your septic system. Such usage is banned in many areas.

Q: If the loop falls below freezing, will it hurt the system?

A: No. The antifreeze solution used in loops that operate at low temperatures will keep it from freezing down to about 15°F [-9°C]
fluid temperature. In the U.S. and Canada, three types of antifreeze solution are acceptable: propylene glycol, methyl alcohol,
and ethyl alcohol. Some states/provinces may require one type over another.

Q: Can I install an earth loop myself?

A: It’s not recommended. In addition to thermal fusion of the pipe, good pipe-to-soil contact is very important for
successful loop operation. Nonprofessional installations may result in less than optimum heat pump performance.

Q: I have a pond near my home. Can I put a loop in it?

A: Yes, if it’s deep enough and large enough. A minimum of 8 - 10 feet [2.5 - 3 meters] in depth at its lowest level during
the year is needed for a pond to be considered. In pond loops, polyethylene pipe must be used. Generally, a minimum of
1/2 acre [0.2 hectare] pond is required to provide adequate surface area for heat transfer.

7
 Geothermal heat pumps: open-loop systems
Q: What is an open-loop system?
A: The term “Open-Loop” is commonly used
to describe a geothermal heat pump
system that uses groundwater from a
conventional well as a heat source in
winter and a heat sink in summer. The
groundwater is pumped through the
heat pump where heat is extracted (in
winter) or rejected (in summer) then the
water is disposed of in an appropriate
manner. Since groundwater is a relatively
constant temperature year-round, it is an
excellent heat source/heat sink.

Q: What do I do with the discharge

water?
A: There are a number of ways to dispose
of water after it has passed through the
heat pump. The open discharge method
is the easiest and least expensive. Open
discharge simply involves releasing the An example of a groundwater installation
water into a stream, river, lake, pond, ditch
or drainage tile. Obviously, one of these alternatives must be readily available and must possess the capacity to accept
the amount of water used by the heat pump before open discharge is feasible.
A second means of water discharge is the return well. A return well is a second well bore that returns the water to
the ground aquifer. A return well must have enough capacity to dispose of the water passed through the heat pump.
A new return well should be installed by a qualified well driller. Likewise, a professional should test the capacity of an
existing well before it is used as a return.

Q: How much groundwater does an open-loop system need?

A: Geothermal heat pumps used in open-loop systems need differing amounts of water depending on the size of the
unit. The water requirement of a specific model is usually expressed in gallons per minute (l/s) and is listed in the
specifications for that unit. Your heating and cooling contractor should be able to provide this information. Generally,
the average system will use 6-10 G.P.M. [0.4 - 0.6 l/s] while operating. An extremely cold day might result in a usage of
6,000-10,000 gallons [23,000 - 38,000 liters] of water.
Your well and pump combination should be large enough to supply the water needed by the heat pump in addition to
your domestic water requirements. You will probably need to enlarge your pressure tank or modify your plumbing to
supply adequate water to the heat pump.

Q: What problems can be caused by poor water quality?

A: Poor water quality can cause serious problems in open-loop systems. Your water should be tested for hardness, acidity
and iron content before a heat pump is installed. Your contractor can tell you what level of water quality is acceptable.
Mineral deposits can build up inside the heat pump’s heat exchanger. Sometimes a periodic cleaning with a mild acid
solution is all that’s needed to remove the build-up.
Impurities, particularly iron, can eventually clog a return well. If your water has a high iron content you should be sure
that the discharge water is not aerated before it’s injected into a return well.

8
Geothermal heat pumps: open-loop systems continued
Finally, you should opt against using water from a spring, pond, lake or river as a source for your heat pump system
unless it’s proven to be free of excessive particles and organic matter. They can clog a heat pump system and make it
inoperable in a short time.
If water quality is a concern, a closed-loop system should be used.

Q: Does an open-loop system cause environmental damage?

A: No. They are pollution free. The heat pump merely removes heat from or adds heat to the water. No pollutants are
added whatsoever. The only change in the water returned to the environment is a slight increase or decrease in
temperature.

Q: Are there any laws that apply to open-loop installations?

A: In some localities, all or parts of the installation may be subject to local ordinances, codes, covenants or licensing
requirements. Check with local authorities to determine if any restrictions apply in your area.

Geothermal heat pumps: parts of the system

Q: What are the components of a geothermal heat pump system?
A: The three main parts are the heat pump unit, the liquid heat exchange medium (open or close loop), and the air delivery
system (ductwork).

Q: Are all geothermal heat pumps alike?

A: No. There are different kinds of
geothermal heat pumps designed for
specific applications. Many geothermal
heat pumps, for example, are intended
for use only with higher temperature Air
ground water encountered in open-loop Handler
systems. Others will operate at entering
water temperatures as low as 20°F
[-7°C] which is required for closed-loop
systems.
Geothermal heat pumps can also differ
in the way they are designed. Self- Ground
contained units combine the blower, Loop
Loop Connections
compressor, water heat exchanger and Circulation
air coil in a single cabinet. Split systems Pump(s)
allow the coil to be added to a forced-air
furnace and utilize the existing blower. Hot
Water
Q: Is a geothermal heat pump difficult Tank
to install?
A: Most units are easy to install, especially Geothermal
when they are replacing another forced- Heat Pump
air system. They can be installed in
areas unsuitable for fossil fuel furnaces
because there is no combustion, thus,
An example of a indoor split unit installation with an electric furnace in attic
no need to vent exhaust gases.
Ductwork must be installed in homes that don’t have an existing air distribution system. The difficulty of installing
ductwork will vary and should be assessed by a contractor.

9
 Geothermal heat pumps: parts of the system continued
Q: Will I have to add insulation to my home if I
install one of these systems?
A: Geothermal heat pumps will reduce your heating
and cooling costs regardless of how well your home
is insulated. However, insulating and weatherizing
are key factors in realizing the most savings from
any type of heating and cooling system. Ground
Loop
Connections
Q: Can a geothermal heat pump also heat water
for my home?
A: Yes. Using what’s called a Hot Water Generator
(HWG), some types of geothermal heat pumps can
save you up to 50 percent on your water heating bill
by pre-heating tank water. The HWG is a factory-
installed option.
Hot
Water
Q: Can a geothermal heat pump be added to my Tank
fossil fuel (Gas, oil, propane) furnace?
A: Split systems can easily be added to existing
furnaces for those wishing to have a dual-fuel Indoor
system. Use the heat pump as the main heating Geothermal Loop
Heat Pump Circulation
source and a furnace as a supplement in extremely Pump(s)
cold weather if additional heat is needed.
An example of a packaged upflow unit installation

Q: I have ductwork, but will it work with this

system?
A: In all probability, yes. Your installing contractor
should be able to determine ductwork requirements
and any minor modifications, if needed.

Q: Do I need to increase the size of my electric

service?
A: Geothermal heat pumps don’t use large amounts
of resistance heat, so your existing service may be
adequate. Generally, a 200-amp service will have
enough capacity, and smaller amp services may be
large enough in some cases. Your electric utility or
contractor can determine your service needs.
Cased
Q: Should I buy a heat pump large enough to heat Coil
my home with no supplemental heat?
Hot
A: Your contractor should provide a heating and cooling Water
load calculation (Heat Loss/Heat Gain) to guide Furnace
Tank
your equipment selection. Geothermal heat pumps
are sized to meet all your cooling requirements. Outdoor (Split)
Geothermal
Depending on your heating needs, a geothermal heat
Heat Pump
pump will supply 80-100 percent of your designed
heating load. Sizing the heat pump to handle your
entire heating needs may result in slightly lower
heating costs, but the savings may not offset the
An example of a outdoor dual fuel split unit installation matched with a cased
added cost of the larger heat pump unit. Also, some
air coil
oversized units can cause dehumidification problems
during the cooling mode, resulting in a loss of
summer comfort.
10
Other types of installations:
• Horizontal
• Vertical downflow
• Water-to-water (radiant floor heating)

Geothermal heat pumps: the major benefits

Q: How efficient is a geothermal heat pump?
A: Geothermal heat pumps are 3.5 - 5 times as efficient as the most efficient fossil fuel furnace. Instead of burning a
combustible fuel to make heat, they simply move heat that already exists. By doing so, they provide 3.5 - 5 units of
energy for every unit used to power the heat-pump system.

Q: What does a system like this cost?

A: A system for the typical home will cost more than if you bought a separate forced-air furnace and central air
conditioning system. But you wouldn’t be comparing “apples to apples”. To get an accurate comparison of costs you
need to consider the following:
• Payback, or how long it takes to recover the difference in costs between the two systems using energy savings.
Payback for most geothermal heat pump systems runs three to five years.
• Energy efficiency of the two systems. To get an accurate picture, make sure efficiency claims are substantiated. Your
lifestyle and how well your home is insulated affect how economical a system will be.
• Total operating savings from heating, cooling and domestic hot water must be combined to get an accurate picture of
total energy savings.
• Energy costs and availability, both present and future.
• Maintenance costs and system reliability.
• System lifespan.
• ClimateMaster GeoDesigner software can calculate annual operating costs for geothermal systems and compare to
other technologies.

Q: What about comfort?

A: In winter, a geothermal heat pump system moves warm air (90° - 105°F) [32° - 41°C] throughout your home via a
standard duct network. Typically, a very even comfort level is found throughout the home. This is because the warm air
is moved in slightly higher volumes and, therefore, saturates the home with warmth more evenly. This even helps out
hot or cold spots and eliminates the hot air blasts common with fossil fuel furnaces.
In summer, cool, dehumidified air is dispersed through the same duct network.
It’s also a great comfort to know that you’ve reduced your energy consumption while using an inexhaustible energy
source - the earth.

11
 Geothermal heat pumps: the major benefits continued
Q: Which system is best, open- or closed-loop?
A: The net results in operating cost and efficiency are virtually the same. Which system to choose depends mainly
on whether you have an adequate groundwater supply and means of disposal. If you do, an open loop can be used
very effectively. If not, either a horizontal or vertical closed-loop system is your best choice.

Over a period of years, a closed-loop system will require less maintenance because it’s sealed and pressurized,
eliminating the possible build-up of minerals or iron deposits.

Geothermal heat pumps: Questions you should ask about a new

heating and cooling system
Regardless of the type of heating and cooling system you may be considering for your home or business, there are specific
questions you should ask the dealer/installer. These questions deal with finding out the actual efficiency of the system, any
operating limitations it may have, and the bottom line of operating costs. The answers here are meant as a guide for what you
should try to find out with your questions.

Q: What is the Btuh [kW] size of the geothermal heat pump or furnace that’s being proposed?
A: Heating systems are designed to provide specific amounts of heat energy per hour. The term “Btuh” [kW] refers to
how much heat can be produced by the unit. Before you can know what size system you’ll need, you must have a heat
loss/heat gain calculation done on your home. From that, an accurate determination can be made on the size of the
heating/cooling system. Many fossil fuel furnaces are substantially oversized for home heating requirements, resulting
in increased operating costs.

Q: Is the efficiency rating actual or just a manufacturer’s average?

A: All types of heating and cooling systems have a rated efficiency. Fossil fuel furnaces have a percentage efficiency
rating. Natural gas, propane and fuel oil furnaces have efficiency ratings based on laboratory conditions. To get an
accurate installed efficiency rating, factors such as flue gas heat losses, cycling losses caused by oversizing, blower fan
electrical usage, etc., must be included.
Air conditioners are normally rated in SEER (Seasonal Energy Efficiency Ratio). SEER and EER (Energy Efficiency Ratio)
cannot be directly compared without the use of software.
Geothermal heat pumps, as well as all other types of heat pumps, have efficiencies rated according to their Coefficient
of Performance or COP for heating and EER for cooling. It’s a scientific way of determining how much energy the
system produces versus how much it uses.
Most geothermal heat pumps systems have COPs of 3.5 - 5.0. That means for every one unit of energy used to
power the system, 3.5 to 5 units are supplied as heat. Whereas a fossil fuel furnace may be 80-90 percent efficient, a
geothermal heat pump is about 450 percent efficient. Some geothermal heat pump manufacturers and electric utilities
use software to accurately determine the operating efficiency of a system for your home. Software like ClimateMaster
GeoDesigner allows comparisons in dollars to avoid the confusion of the various rating systems.

Q: Will the minimum entering water temperature have an affect on which heat pump I buy?
A: Yes. If you have an open-loop system, your entering water temperatures (EWTs) may range from the 70s°F [20s°C]
in the southern United States to the 40s°F [single digits, °C] in Canada. All heat pumps can handle temperatures in
the moderate to warm ranges. A closed-loop system, on the other hand, may encounter EWTs below freezing. Not all
ground-source heat pumps will operate at those low temperatures. It’s important for you to know what EWTs your heat
pump will handle.

Q: Are the dealer and loop installers qualified?

A: Don’t be afraid to ask for references from dealers. A reputable dealer won’t hesitate to give you names and numbers to
call to confirm his capabilities. The same applies to the loop installer.

12
Geothermal heat pumps: Questions continued
Q: Will open- or closed-loop be best for you?
A: That depends on several factors, as stated earlier. A dealer should be willing to install what’s best for you, not for him.

Q: Will the loop joints be heat fused?

A: The only acceptable method for joining buried sections of the special pipe used for closed loop systems is heat fusion.
Any other method will eventually result in the failure of the loop.

Q: How long is the payback period for a ground-source heat pump system?
A: To figure this accurately, you must know how much per year you’ll save in energy costs with a ground-source system,
and the difference between it and a traditional heating system and central air conditioner. As an example: if you’ll save
$700 per year with a ground-source system and the costs difference is $2,000, your payback would be less than three
years.

Q: If a home has ceiling cable heat or baseboard heat, do air ducts need to be installed in my home?
A: Not always. It may be desirable to install ground-source heat pump room units. For some small homes, one room
unit would provide most of the heating and cooling needs. Ceiling cable or baseboard units could then be used for
supplemental heat.

Q: Can I use a heat pump for radiant floor heating (warm floors)?
A: Yes. Water-to-Water heat pumps heat water instead of air. The principle is the same as far as loop piping is concerned.
Warm water is circulated through the floor to heat the home.

Q: If I want to know more about geothermal heat pumps, whom should I contact?
A: Visiting climatemaster.com, or speaking with the dealer that provided this brochure can provide you with a wealth of
additional information about geothermal heat pumps.
One of the many resources provided at climatemaster.com is a distributor locator to find the nearest ClimateMaster
distributor. Your ClimateMaster distributor can put you in touch with qualified installers in your area. Also, your local
electric utility can provide you with more information. Go to climatemaster.com to find a ClimateMaster dealer near you.

13
 Glossary:
Closed-loop heat pump system: A heat pump system that uses a loop of buried plastic pipe as a heat exchanger. Loops
can be horizontal or vertical.

Compressor: The central part of a heat pump system. The compressor increases the pressure and temperature of the
refrigerant and simultaneously reduces the volume while causing the refrigerant to move through the system.

COP (Coefficient of Performance): The ratio of heating provided by a heat pump (or other refrigeration machine) to the
energy consumed by the system under designated operating conditions. The higher the COP, the more efficient the system.

Cycling losses: The actual efficiency of a heating or cooling system is reduced due to start-up and shut-down losses. Over
sizing a heating or cooling system increases cycling losses.

EER (Energy Efficiency Ratio): The ratio of cooling provided by a heat pump (or other refrigeration machine) to the
energy consumed by the system under designated operating conditions. The higher the EER, the more efficient the system.

Fossil fuel: Any of several types of combustible fuels formed from the decomposition of organic matter. Examples are
natural gas, propane, fuel oil, and coal.

Geothermal heat pump: A heat pump that uses the earth as a heat source and heat sink.

Heat exchanger: A device designed to transfer heat between two physically separated fluids or mediums of different
temperatures.

Heat pump: A mechanical device used for heating and cooling which operates by moving heat from one location to
another. Heat pumps can extract heat from air, water, or the earth. They are classified as either air-source or ground-source
(geothermal) units.

Heat sink: The medium - air, water or earth - which receives heat rejected from a heat pump.

Heat source: The medium - air, water or earth - from which heat is extracted by a heat pump.

Hot Water Generator: A device for recovering superheat from the compressor discharge gas of a heat pump or central air
conditioner for use in heating or preheating potable water.

Open-loop heat pump system: A heat pump system that uses groundwater from a well. The water is returned to the
environment.

Payback: A method of calculating how long it will take to recover the difference in costs of two different heating and cooling
systems by using the energy and maintenance cost savings from the more efficient system.

Supplemental heating: A heating system used during extremely cold weather when additional heat is needed to
moderate indoor temperatures. May be in the form of electric resistance or fossil fuel.

14
Notes:

15
24-hour information:
877-436-6263
climatemaster.com

7300 S.W. 44th Street

Oklahoma City, OK 73179
405-745-6000

ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time for order may be changed without notice and may not
be as described herein. Please contact ClimateMaster’s Customer Service Department at 405-745-6000 for specific information on the current design and specifications. Savings
vary due to weather conditions, local conditions, user preferences, and utility rates. Statements and other information contained herein are not warranties and do not form the basis
of any bargain between the parties, but are merely ClimateMaster’s opinion or commendation of its products.
Engineered and assembled in the USA

RP002 © ClimateMaster, Inc. 2007 Rev: January 10, 2020