WELCOME

1
Geomorphological
Processes and
Environments

2
What we see on the earth’s natural
surface?

3
 Various landform features
1
2
3

4
5
6

4
 Geomorphology
The word Geomorphology derived from Greek: geo,
"earth"; morfé, "form"; and logos, "study"; is the
scientific study of landforms and the processes that
shape them.
It is a composite science, is the study of landforms
including, in recent times especially, investigations into
the processes that cause and alter the landforms.
Geomorphology is practiced within physical
geography, geology, geodesy, engineering geology,
archaeology and geotechnical engineering.
5
 Why Geomorphology?
To understand geomorphological processes of
various environment.
To detect natural and environmental hazards
efficiently, e.g. earthquake, flooding, landslide,
tsunami, volcanism etc.
To identify various landform features and landscapes
To identify various landform features from satellite
images
Coastal and river research
6
Vulnerability studies
What are the processes work
behind the landforms?

7
 Geomorphic Process
The process responsible for the formation and
alteration of the earth's surface.
The physical and chemical interactions between
the earth's surface and the natural forces acting
upon it to produce landforms.
The processes are determined by such natural
environmental variables as geology, climate,
vegetation and base level, to say nothing of
8
human interference.
 Agent of Geomorphological Processes
 River activities- Humid Geomorphic Environment

 Wind activities - Arid Geomorphic Environment

 Glacier activities - Glacial and Peri-Glacial Geomorphic Environments

 Wave activities - Marine and Coastal Geomorphic

Environment

9
Activities of the Agent of Geomorphic Processes
Three types of activities are done
Erosional activities

Transportation

Depositional activities

10
Activities of the Agent of Geomorphic Processes

Activities Results

Erosional activities Erosional landform features

Transportation Transportation

Deposition activities Depositional landform features

11
Agents of Change...
River activities Wind activities

Glaciers activities Wave activities

12
 GEOMORPHOLOGICAL PROCESSES

Terrestrial Processes Extra-terrestrial Processes

Exogenetic Processes Endogenetic Processes

i. Weathering i. Faulting and Folding

ii. Erosion/Degradation ii. Volcanism
iii. Transportation iii. Earthquake
iv. Deposition/Aggradation iv. Landslide
v. Mass movement v. Diastrophism
vi. Metamorphism
Denudation
•Physical Weathering
•Chemical Weathering
•Biological Weathering
13
 Types of Geomorphic Processes
 Geomorphic Processes
A. Terrestrial processes
B. Extra-terrestrial processes, e.g. fall of meteorite
(mass/rock from outer space).

Terrestrial processes
1. Exogenetic / Exogenous Processes
2. Endogenetic / Endogenous Processes

14
Extra-terrestrial processes,
e.g. fall of meteorite

15
Types of Geomorphic Processes (Cont…)
Exogenetic/Exogenous Processes

Outer geomorphological processes = exogenetic processes (solar

radiation, wind, temperature changes, water) create relief
sculptures, surface features.
Exogenetic Processes

Endogenetic Processes

16
Types of Geomorphic Processes (Cont…)
Endogenetic Processes

Inner geomorphological processes = endogenetic processes

(earthquakes, volcanoes, folding and faulting) create rough
features of the Earth´s relief. e.g. oceanic basins, mountain
ranges, oceanic ridges and trenches, rift valleys, folds, faults
Exogenetic
and volcanoes, etc. Processes

Endogenetic
Processes

17
 Basic difference between the two process
Processes that are caused by forces from within the
Earth are endogenous processes.
By contrast, exogenous processes come from forces
on or above the Earth's surface.

Endogenic Processes Exogenic Processes

Originate in the interior of the earth. Originate on the surface of the earth.
Causes sudden or rapid movements Causes slow movements.
Eg: Earthquake, faulting, diastrophism Eg: Erosional and Depositional

18
Types of Exogenetic / Exogenous Processes

i. Weathering
ii. Erosion/ Degradation
iii. Transportation
iv. Deposition/Aggradation
v. Mass movement

19
 Denudation
It means to make the things exposed.

The processes by which the rocks on the earth’s surface are broken
into pieces through the application of external physical forces and
the debris are transported elsewhere is known as denudation.

This denudation work is performed through three processes such as

weathering, erosion and transportation.

Denudation= Weathering + Erosion + Transportation

20
 Weathering

Sun Rain Pressure

21
 Weathering
The weathering is a process by which the rocks on the surface
of the earth is broken mechanically into pieces due to snow or
frost, the variation of temperature and pressure or due to
chemical (dissolution) action on the materials.

Even the rocks are dislodged by the animals. But the rocks
weathered this way, are not transported elsewhere.

22
 Erosion
Erosion and transportation are accomplished together.

The process by which the rocks of the earth’s crust are eroded
by the river, wind, glacier, ocean currents etc. are transported
elsewhere is known as erosion.

23
 Degradation
Degradation is the lowering of a bottomland surface through
the process of erosion;

Conceptually it is the opposite of the vertical component of

aggradation and is most frequently applied to sediment
removed from a channel bed or other low-lying parts of a
stream channel.

24
 Weathering vs. Erosion
Weathering = process of disintegration or
decomposition of rocks which stay then in the
same place.
Erosion = process of disintegration or
decomposition of rocks which are transported
somewhere else.

25
 Deposition
Deposition is the constructive process of accumulation
into beds or irregular masses of loose sediment or
other rock material by any natural agent;

26
 Aggradation
Aggradation is the raising or elevating of a bottomland surface
through the process of alluvial deposition;

Conceptually it is the vertical component of accretion and is most

frequently applied to sediment deposition on a channel bed, bar
or other near-channel surfaces, flood plain, or, less often, low-
lying alluvial terrace.

27
 Sedimentation
 Sedimentation is the process by which sediment is
mechanically deposited from suspension within a fluid,
generally water, or ice, thereby accumulating as layers of
sediment that are segregated owing to differences in size,
shape, and composition of the sediment particles.

28
 Mass movement/Mass Wasting
Mass movement is any downslope transfer, through
gravitational and generally water-facilitated (viscous)
processes, of near-surface soil and rock material;

Rates of mass movement range from very slow creep to nearly

instantaneous slope failure.

29
 GEOMORPHOLOGICAL PROCESSES

Terrestrial Processes Extra-terrestrial Processes

Exogenetic Processes Endogenetic Processes

i. Weathering i. Faulting and Folding

ii. Erosion/Degradation ii. Volcanism
iii. Transportation iii. Earthquake
iv. Deposition/Aggradation iv. Landslide
v. Mass movement v. Diastrophism
vi. Metamorphism
Denudation
•Physical Weathering
•Chemical Weathering
•Biological Weathering
30
 Faulting
Fault is a planar or gently curved fracture in the rocks of the
earth’s crust, where compressional or tensional forces cause
relative displacement of the rocks on the opposite sides of the
fracture.

31
 Folding
Fold is an undulation or waves in the stratified rocks of the
earth’s crust.
A fold occurs when one or a mass of originally flat and planar
surfaces, such as sedimentary strata, are bent or curved as a
result of permanent deformation.

32
 Volcanism
Volcanism is the phenomenon of eruption of molten
rock (magma) onto the surface of the earth, where lava
and volcanic gases erupt through a break in the surface
called a vent.
Eruption of the volcanoes or the magma is the main
sources of igneous rocks on the surface of the earth.

33
 Earthquake
An earthquake is a vibration or oscillation of the surface of the
earth caused by sudden release of enormous pressure.

34
 Landslide
A landslide, also known as a landslip, which includes a wide
range of ground movements, such as rock fall, deep failure of
slopes and shallow debris flows, which can occur in offshore,
coastal and onshore environments.

35
 Diastrophism
 Diastrophism is also called tectonism, large-scale
deformation of earth’s crust by natural processes, which leads
to the formation of continents and ocean basins, mountain
systems, plateaus, rift valleys, and other features by
mechanisms such as plate movement, volcanic loading, or
folding.

 Internal forces active here

36
 Metamorphism
Metamorphism is the change in rock structure, minerals or
geologic structure.
It is a process of change in the physical structure of rock as a
result of long-term heat, pressure and introduction of
chemically active fluids, especially a change that increases the
rock's hardness and crystalline structure.
The change occurs primarily due to heat, pressure, and the
introduction of chemically active fluids.

37
Geomorphological Processes at a glance

38
Thanks To All

39