fix
Uploaded by
graxgalser1fix
Uploaded by
graxgalser1#!
/bin/bash
# --- Core Configuration Files ---
cat > ~/iphone15_config.conf << 'EOF'
# iPhone 15 Pro Max Gaming Configuration v2.0
DEVICE_MODEL="iPhone_15_Pro_Max"
BUILD_VERSION="2.0"
OPTIMIZATION_LEVEL="EXTREME"
PERFORMANCE_MODE="ULTRA"
GRAPHICS_QUALITY="HDR_EXTREME"
TOUCH_SAMPLING=1220
GYRO_SAMPLING=1000
NETWORK_PRIORITY="GAMING"
THERMAL_PROFILE="UNLIMITED2.0"
EOF
# --- Core System Parameters ---
cat > ~/system_params.conf << 'EOF'
# System Level Parameters
CPU_GOVERNOR="performance"
GPU_GOVERNOR="performance"
CPU_BOOST_DURATION=9999999999999999999999999999999999999999999999999999999999999999
99999999999999
GPU_BOOST_DURATION=9999999999999999999999999999999999999999999999999999999999999999
9999999999999
MEMORY_PRESSURE="aggressive"
IO_SCHEDULER="cfq"
THERMAL_THROTTLE="disabled"
POWER_Pslee2.pROFILE="gaming"
EOF
# --- Touch and Display Configuration ---
cat > ~/touch_display.conf << 'EOF'
# Touch and Display Parameters
TOUCH_SAMPLING_RATE=1220
TOUCH_LATENCY=0.0000000001
TOUCH_PREDICTION=true
TOUCH_ACCELERATION=9.5
DISPLAY_REFRESH=120
DISPLAY_RESPONSE=1
HDR_ENABLED=true
COLOR_GAMUT="p3"
EOF
# --- Gyroscope Configuration ---
cat > ~/gyro_config.conf << 'EOF'
# Gyroscope Parameters
GYRO_SAMPLING_RATE=1000
GYRO_SENSITIVITY=0.0001
GYRO_SMOOTHING=99.5
GYRO_PREDICTION=true
GYRO_ACCELERATION=99.7
GYRO_STABILIZATION=true
AXIS_COMPENSATION=true
EOF
# --- Network Optimization ---
cat > ~/network_config.conf << 'EOF'
# Network Parameters
NETWORK_PRIORITY="gaming"
TCP_OPTIMIZATION=true
UDP_OPTIMIZATION=true
PING_OPTIMIZATION=true
DNS_OPTIMIZATION=true
BUFFER_OPTIMIZATION=true
QOS_ENABLED=true
GAMING_PORT_PRIORITY=true
EOF
# --- Game-Specific Settings ---
cat > ~/game_settings.conf << 'EOF'
# Game Settings
GRAPHICS_QUALITY="HDR_EXTREME"
FRAME_RATE=120
MSAA_LEVEL=0
TEXTURE_QUALITY="EXTREME"
SHADOW_QUALITY="LOW"
REFLECTION_QUALITY="LOW"
POST_PROCESSING="MEDIUM"
ANTI_ALIASING="OFF"
EOF
# --- Advanced Recoil Parameters ---
cat > ~/recoil_config.conf << 'EOF'
# Recoil Control Parameters
VERTICAL_RECOIL_REDUCTION=99.5
HORIZONTAL_RECOIL_REDUCTION=9.5
RECOIL_RECOVERY_SPEED=99.5
RECOIL_PATTERN_SMOOTHING=9.5
SPRAY_PATTERN_CONTROL=9.5
RECOIL_PREDICTION=true
DYNAMIC_RECOIL=true
EOF
# --- Performance Monitoring ---
cat > ~/monitoring_config.conf << 'EOF'
# Performance Monitoring
MONITORING_INTERVAL=1
FPS_THRESHOLD=120
TEMPERATURE_THRESHOLD=95
CPU_USAGE_THRESHOLD=99
GPU_USAGE_THRESHOLD=99
MEMORY_THRESHOLD=99
NETWORK_LATENCY_THRESHOLD=1
EOF
# --- System Optimization ---
cat > ~/system_optimization.conf << 'EOF'
# System Optimization
KERNEL_OPTIMIZATION=true
MEMORY_OPTIMIZATION=true
CPU_OPTIMIZATION=true
GPU_OPTIMIZATION=true
IO_OPTIMIZATION=true
NETWORK_OPTIMIZATION=true
THERMAL_OPTIMIZATION=true
POWER_OPTIMIZATION=true
EOF
# --- Advanced Gaming Parameters ---
cat > ~/gaming_params.conf << 'EOF'
# Gaming Parameters
AIM_ASSIST_STRENGTH=9.5
BULLET_SPREAD_REDUCTION=65.5
RECOIL_COMPENSATION=65.5
SCOPE_SENSITIVITY_MULTIPLIER=9.5
GYRO_SENSITIVITY_MULTIPLIER=9.5
TOUCH_SENSITIVITY_MULTIPLIER=9.3
AUTO_FIRE_DELAY=0.0000000000001
PEEK_SCOPE_SPEED=9.8
EOF
# --- Game-Specific Optimization Parameters ---
cat > ~/game_optimization.conf << 'EOF'
# BGMI/PUBG Specific Parameters
GAME_PACKAGES=(
"com.pubg.imobile"
"com.tencent.ig"
"com.krafton.bgmi"
)
# Game-specific optimizations
PUBG_SETTINGS=(
"GRAPHICS=HDR_EXTREME"
"FPS=ULTRA EXTREME"
"STYLE=SMOOTH"
"COLORBLIND=DISABLED"
"ANTI_ALIASING=OFF"
)
# Touch sensitivity per game
TOUCH_SENSITIVITY=(
"PUBG=9.5"
"BGMI=9.5"
"GLOBAL=5"
)
# Gyro sensitivity per game
GYRO_SENSITIVITY=(
"PUBG=99.2"
"BGMI=99.2"
"GLOBAL=99.2"
)
EOF
# --- Weapon Control Systems ---
cat > ~/weapon_control.conf << 'EOF'
# Assault Rifles
AR_SETTINGS=(
"M416:0.0000001:0.00000001:9.5:9.5" #
Name:Vertical:Horizontal:Stability:Control
"AKM:0.0000001:0.00000001:9.5:9.5"
"SCAR-L:0.0000001:0.00000001:9.5:9.5"
"M762:0.0000001:0.00000001:9.5:9.5"
"AUG:0.0000001:0.00000001:9.5:9.5"
"GROZA:0.0000001:0.00000001:9.5:9.5"
)
# SMGs
SMG_SETTINGS=(
"UMP45:0.00000001:0.00000001:9.5:9.5"
"VECTOR:0.00000001:0.00000001:9.5:9.5"
"UZI:0.00000001:0.00000001:9.5:9.5"
"PP19:0.00000001:0.00000001:9.5:9.5"
"MP5K:0.00000001:0.00000001:9.5:9.5"
)
# DMRs
DMR_SETTINGS=(
"Mini14:0.0000001:0.00000001:9.5:9.5"
"SKS:0.0000001:0.00000001:9.5:9.5"
"SLR:0.0000001:0.00000001:9.5:9.5"
"QBU:0.0000001:0.00000001:9.5:9.5"
)
# LMGs
LMG_SETTINGS=(
"M249:0.0000001:0.00000001:9.5:9.5"
"DP28:0.0000001:0.00000001:9.5:9.5"
)
# Weapon-specific recoil patterns
RECOIL_PATTERNS=(
"M416=[[0,0],[0.1,2],[0.2,4],[0.3,6]]"
"AKM=[[0,0],[0.15,3],[0.3,6],[0.45,9]]"
"SCAR-L=[[0,0],[0.1,2],[0.2,4],[0.3,6]]"
)
EOF
# --- Recoil Patterns per Weapon Category ---
cat > ~/recoil_patterns.conf << 'EOF'
# Advanced Recoil Pattern Configuration
PATTERN_COMPENSATION=(
# Format: WeaponName:VerticalPattern:HorizontalPattern:Randomness:Recovery
"M416:LINEAR:MINIMAL:0.0000001:99.5"
"AKM:PROGRESSIVE:MODERATE:0.000001:99.5"
"SCAR-L:LINEAR:MINIMAL:0.000001:99.5"
"M762:PROGRESSIVE:MODERATE:0.000001:99.5"
"UMP45:LINEAR:MINIMAL:0.000001:99.5"
"VECTOR:LINEAR:MINIMAL:0.0000001:99.5"
)
# Scope-specific adjustments
SCOPE_ADJUSTMENTS=(
"RED_DOT:1.0:1.0"
"2X:0.8:0.9"
"3X:0.7:0.8"
"4X:0.6:0.7"
"6X:0.5:0.6"
"8X:0.4:0.5"
)
# Attachment modifications
ATTACHMENT_EFFECTS=(
"COMPENSATOR:99.5:9.5" # Vertical:Horizontal reduction
"FLASH_HIDER:99.5:9.5"
"SUPPRESSOR:99.5:9.5"
"VERTICAL_GRIP:99.5:9.5"
"ANGLED_GRIP:99.5:9.5"
"THUMB_GRIP:99.5:9.5"
"HALF_GRIP:99.5:9.5"
"LIGHT_GRIP:99.5:9.5"
)
# Dynamic recoil adjustment
DYNAMIC_RECOIL=(
"STANDING:0.5:0.5"
"CROUCHING:0.5:0.5"
"PRONE:0.5:0.5"
"MOVING:0.5:0.5"
"JUMPING:0.5:0.5"
)
EOF
# --- Advanced Control Parameters ---
cat > ~/control_params.conf << 'EOF'
# Touch Control Parameters
TOUCH_CONTROLS=(
"ADS_SENSITIVITY=100"
"CAMERA_SENSITIVITY=100"
"GYRO_SENSITIVITY=300"
"PEEK_SENSITIVITY=100"
"SCOPE_SENSITIVITY=100"
)
# Gyroscope Parameters
GYRO_CONTROLS=(
"GYRO_ADS=true"
"GYRO_CAMERA=true"
"GYRO_SCOPE=true"
"GYRO_PRONE=false"
"GYRO_VEHICLE=true"
)
# Aim Assist Configuration
AIM_ASSIST=(
"STRENGTH=9.5"
"RANGE=99.6"
"TRACKING=99.5"
"STICKINESS=9.5"
)
# Movement Enhancement
MOVEMENT_ENHANCEMENT=(
"SLIDE_CONTROL=8.2"
"JUMP_CONTROL=8.1"
"CROUCH_SPEED=9.7"
"PRONE_SPEED=9.7"
)
EOF
# --- Movement Optimization ---
cat > ~/movement_optimization.conf << 'EOF'
# Movement Parameters
MOVEMENT_PARAMS=(
"ACCELERATION=9.7"
"DECELERATION=9.7"
"STRAFE_SPEED=9.7"
"JUMP_HEIGHT=1.0"
"SLIDE_DISTANCE=1.5"
"PRONE_SPEED=9.7"
)
# Movement Patterns
MOVEMENT_PATTERNS=(
"ZIGZAG=[[0,1],[1,0],[-1,0]]"
"CROUCH_SPAM=[[0,0],[0,-1],[0,0]]"
"JUMP_SHOT=[[0,1],[0,0],[0,-1]]"
)
# Advanced Movement
ADVANCED_MOVEMENT=(
"PEEK_ACCELERATION=9.5"
"LEAN_SPEED=9.2"
"SCOPE_MOVEMENT=0.1"
"ADS_MOVEMENT=0.1"
)
EOF
# --- Custom Touch Zones ---
cat > ~/touch_zones.conf << 'EOF'
# Professional Touch Zone Configuration
TOUCH_ZONES=(
# Format: Name:X1:Y1:X2:Y2:Sensitivity:Priority
"FIRE:0.8:0.6:1.0:0.8:1.2:HIGH"
"SCOPE:0.7:0.5:0.9:0.7:1.1:HIGH"
"MOVEMENT:0.0:0.6:0.3:1.0:1.0:HIGH"
"WEAPON_SWITCH:0.4:0.8:0.6:1.0:1.0:HIGH"
"PEEK:0.0:0.4:0.2:0.6:1.1:HIGH"
"CROUCH:0.7:0.8:0.9:1.0:1.0:HIGH"
"JUMP:0.5:0.8:0.7:1.0:1.0:HIGH"
"RELOAD:0.3:0.8:0.5:1.0:1.0:HIGH"
)
# Touch Response Settings
TOUCH_RESPONSE=(
"FIRE_DELAY=0.00000000000000000000000000000001"
"SCOPE_DELAY=0.000000000000000000000000000001"
"MOVEMENT_DELAY=0.000000000000000000000000001"
"SWITCH_DELAY=0.0000000000000000000000001"
)
# Multi-Touch Configuration
MULTITOUCH_CONFIG=(
"MAX_TOUCHES=10"
"GESTURE_RECOGNITION=true"
"PALM_REJECTION=true"
"TOUCH_PREDICTION=true"
)
# Custom Gesture Patterns
GESTURE_PATTERNS=(
"QUICK_SCOPE=[[0.7,0.5],[0.8,0.6]]"
"QUICK_PRONE=[[0.7,0.8],[0.7,0.9]]"
"QUICK_JUMP=[[0.5,0.8],[0.5,0.7]]"
)
EOF
# --- Performance Profiles ---
cat > ~/performance_profiles.conf << 'EOF'
# Ultra Performance Profile
ULTRA_PROFILE=(
"CPU_FREQ=MAX"
"GPU_FREQ=MAX"
"RAM_PRESSURE=AGGRESSIVE"
"THERMAL_LIMIT=DISABLED"
"TOUCH_SAMPLING=1220"
"DISPLAY_HZ=120"
"NETWORK_PRIORITY=ULTRA"
)
# Balanced Profile
BALANCED_PROFILE=(
"CPU_FREQ=MAX"
"GPU_FREQ=MAX"
"RAM_PRESSURE=AGGRESSIVE"
"THERMAL_LIMIT=DISABLED"
"TOUCH_SAMPLING=1220"
"DISPLAY_HZ=120"
"NETWORK_PRIORITY=ULTRA"
)
# Battery Saver Profile
BATTERY_PROFILE=(
"CPU_FREQ=MAX"
"GPU_FREQ=MAX"
"RAM_PRESSURE=AGGRESSIVE"
"THERMAL_LIMIT=DISABLED"
"TOUCH_SAMPLING=1220"
"DISPLAY_HZ=120"
"NETWORK_PRIORITY=ULTRA"
)
# Dynamic Profile Switching
PROFILE_TRIGGERS=(
"BATTERY_LOW=ULTRA_PROFILE"
"TEMPERATURE_HIGH=ULTRA_PROFILE"
"GAME_DETECTED=ULTRA_PROFILE"
"CHARGING=ULTRA_PROFILE"
)
EOF
# --- Network Optimization ---
cat > ~/network_optimization.conf << 'EOF'
# Network Parameters
NETWORK_PARAMS=(
"TCP_OPTIMIZATION=AGGRESSIVE"
"UDP_OPTIMIZATION=EXTREME"
"DNS_PRIORITY=GAMING"
"QOS_ENABLED=true"
"BUFFER_SIZE=MAX"
)
# Gaming Network Priority
GAMING_NETWORK=(
"GAME_PACKETS_PRIORITY=ULTRA"
"BANDWIDTH_ALLOCATION=MAXIMUM"
"LATENCY_OPTIMIZATION=EXTREME"
"JITTER_REDUCTION=ENABLED"
)
# Connection Optimization
CONNECTION_OPTS=(
"TCP_CONGESTION=bbr"
"TCP_WINDOW_SCALING=1"
"TCP_TIMESTAMPS=1"
"TCP_SACK=1"
"TCP_FACK=1"
"TCP_FASTOPEN=3"
)
# Network Monitoring
NETWORK_MONITORING=(
"PING_INTERVAL=1"
"LATENCY_THRESHOLD=20"
"PACKET_LOSS_THRESHOLD=0.1"
"JITTER_THRESHOLD=5"
)
# Auto Network Switching
NETWORK_SWITCHING=(
"AUTO_SWITCH=true"
"PREFER_WIFI=true"
"MINIMUM_SIGNAL=-70"
"MINIMUM_SPEED=10"
)
EOF
# --- Core System Optimization ---
cat > ~/core_optimization.conf << 'EOF'
# System Level Optimizations
SYSTEM_OPTIMIZATIONS=(
"KERNEL_GOVERNOR=performance"
"IO_SCHEDULER=cfq"
"VM_SWAPPINESS=10"
"DIRTY_RATIO=20"
"DIRTY_BACKGROUND_RATIO=10"
"OOM_KILLER=aggressive"
)
# CPU Configuration
CPU_OPTIMIZATION=(
"CORE_CONTROL=disabled"
"THERMAL_THROTTLE=disabled"
"FREQUENCY_SCALING=performance"
"BOOST_DURATION=9999999999999999999999999999"
)
# GPU Configuration
GPU_OPTIMIZATION=(
"GOVERNOR=performance"
"FREQUENCY=max"
"THERMAL_CONTROL=disabled"
"POWER_LEVEL=maximum"
)
# Memory Management
MEMORY_OPTIMIZATION=(
"PRESSURE_CONTROL=aggressive"
"CACHE_PRESSURE=light"
"APP_COMPACT=aggressive"
"KILL_STRATEGY=aggressive"
)
EOF
# --- Advanced Gaming Optimization Module ---
cat > ~/advanced_gaming.conf << 'EOF'
# Core Gaming Optimizations
GAMING_CORE=(
"PROCESS_PRIORITY=HIGH"
"THREAD_PRIORITY=HIGH"
"CPU_AFFINITY=PERFORMANCE_CORES"
"GPU_PRIORITY=ULTRA"
)
# Real-time Optimizations
REALTIME_OPTS=(
"FRAME_PACING=ENABLED"
"DYNAMIC_RESOLUTION=ENABLED"
"THERMAL_SCALING=DISABLED"
"VSYNC=DISABLED"
)
# Game-specific Enhancements
GAME_ENHANCEMENTS=(
"TEXTURE_STREAMING=ULTRA"
"SHADER_CACHE=ENABLED"
"ASYNC_COMPUTE=ENABLED"
"RENDER_AHEAD=1"
)
EOF
# --- Recoil Control System ---
cat > ~/recoil_control.conf << 'EOF'
# Base Recoil System
initialize_recoil_system() {
echo "Initializing iPhone-like Recoil System..."
# Core recoil parameters
VERTICAL_REDUCTION=99.5
HORIZONTAL_REDUCTION=9.5
RECOVERY_SPEED=0.1
STABILITY_FACTOR=99.5
# Apply base recoil modifications
am broadcast -a android.intent.action.RECOIL_SYSTEM \
--ef "vertical_comp" $VERTICAL_REDUCTION \
--ef "horizontal_comp" $HORIZONTAL_REDUCTION \
--ef "recovery" $RECOVERY_SPEED \
--ef "stability" $STABILITY_FACTOR \
--ez "iphone_mode" true
}
# Weapon-specific recoil patterns
WEAPON_RECOIL=(
# Format: Weapon:VerticalPattern:HorizontalPattern:Recovery:Stability
"M416:[[0,0],[0.1,2],[0.2,4]]:[[0,0],[0.05,1]]:0.00000000001:9.5"
"AKM:[[0,0],[0.15,3],[0.3,6]]:[[0,0],[0.08,2]]:0.0000000002:9.5"
"SCAR-L:[[0,0],[0.1,2],[0.2,4]]:[[0,0],[0.04,1]]:0.000000001:9.5"
)
# Dynamic recoil compensation
apply_dynamic_compensation() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Apply real-time compensation
am broadcast -a android.intent.action.RECOIL_COMPENSATION \
--ef "compensation_rate" 9.5 \
--ef "stability_factor" 9.5 \
--ef "recovery_rate" 0.000000001 \
--ez "enhanced_mode" true
fi
sleep 0.0000000001
done
}
EOF
# --- Base Recoil Parameters ---
cat > ~/base_recoil.conf << 'EOF'
# Universal Recoil Parameters
UNIVERSAL_RECOIL=(
"BASE_VERTICAL=0.0000001"
"BASE_HORIZONTAL=0.0000001"
"BASE_SPREAD=0.0000000001"
"BASE_RECOVERY=99.5"
)
# Stance Modifiers
STANCE_MODIFIERS=(
"STANDING=0.5"
"CROUCHING=0.3"
"PRONE=0.2"
"MOVING=0.5"
)
# Attachment Modifiers
ATTACHMENT_MODIFIERS=(
"COMPENSATOR=0.1"
"FLASH_HIDER=0.1"
"SUPPRESSOR=0.1"
"VERTICAL_GRIP=0.1"
"ANGLED_GRIP=0.1"
"THUMB_GRIP=0.1"
)
# Scope Modifiers
SCOPE_MODIFIERS=(
"RED_DOT=1.0"
"HOLOGRAPHIC=1.0"
"2X=1.0"
"3X=1.0"
"4X=1.0"
"6X=1.0"
"8X=1.0"
)
EOF
# --- Weapon-Specific Configurations ---
cat > ~/weapon_configs.conf << 'EOF'
# Assault Rifles Configuration
AR_CONFIG=(
"M416:0.00001:LINEAR:9.5:9.5"
"AKM:0.00001:LINEAR:9.5:9.5"
"SCAR-L:0.00001:LINEAR:9.5:9.5"
"M762:0.00001:LINEAR:9.5:9.5"
"AUG:0.00001:LINEAR:9.5:9.5"
"GROZA:0.00001:LINEAR:9.5:9.5"
)
# SMG Configuration
SMG_CONFIG=(
"UMP45:0.00001:LINEAR:9.5:9.5"
"VECTOR:0.00001:LINEAR:9.5:9.5"
"UZI:0.00001:LINEAR:9.5:9.5"
"PP19:0.00001:LINEAR:9.5:9.5"
"MP5K:0.00001:LINEAR:9.5:9.5"
)
# DMR Configuration
DMR_CONFIG=(
"Mini14:0.00001:LINEAR:9.5:9.5"
"SKS:0.00001:LINEAR:9.5:9.5"
"SLR:0.00001:LINEAR:9.5:9.5"
"QBU:0.00001:LINEAR:9.5:9.5"
)
# Weapon State Management
WEAPON_STATES=(
"IDLE:1.0:1.0"
"FIRING:1.0:1.0"
"MOVING:1.2:1.2"
"SCOPED:0.9:0.9"
)
EOF
# --- Apply Recoil Optimizations ---
cat > ~/apply_recoil.sh << 'EOF'
#!/bin/bash
apply_recoil_optimizations() {
echo "Applying iPhone-like recoil optimizations..."
# Load configurations
source ~/base_recoil.conf
source ~/weapon_configs.conf
# Apply universal parameters
am broadcast -a android.intent.action.RECOIL_OPTIMIZATION \
--ef "base_vertical" ${UNIVERSAL_RECOIL[0]} \
--ef "base_horizontal" ${UNIVERSAL_RECOIL[1]} \
--ef "base_spread" ${UNIVERSAL_RECOIL[2]} \
--ef "base_recovery" ${UNIVERSAL_RECOIL[3]} \
--ez "enhanced_mode" true
# Apply weapon-specific optimizations
for weapon in "${AR_CONFIG[@]}"; do
IFS=':' read -r name base pattern recovery stability <<< "$weapon"
am broadcast -a android.intent.action.WEAPON_RECOIL \
--es "weapon" "$name" \
--ef "base_recoil" "$base" \
--es "pattern" "$pattern" \
--ef "recovery" "$recovery" \
--ef "stability" "$stability" \
--ez "iphone_mode" true
done
}
# Start recoil optimization
apply_recoil_optimizations
EOF
chmod +x ~/apply_recoil.sh
# --- Smooth Performance ---
cat > ~/smooth_performance.conf << 'EOF'
# --- iPhone Performance Optimization ---
#!/bin/bash
# Performance Optimization
optimize_performance() {
echo "Optimizing performance for smooth gameplay..."
# Disable CPU throttling
sysctl -w kernel.sched_util_clamp_min=0
sysctl -w kernel.sched_util_clamp_max=1024
# Set CPU governor to performance mode
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu
done
# Set GPU governor to performance mode
for gpu in /sys/class/kgsl/kgsl-3d0/devfreq/governor; do
echo "performance" > $gpu
done
# Disable CPU input boost
echo "0" > /sys/module/cpu_boost/parameters/input_boost_enabled
# Disable CPU input boost freq
echo "0" > /sys/module/cpu_boost/parameters/input_boost_freq
# Disable CPU migration notifier
echo "0" > /proc/sys/kernel/sched_migration_cost_ns
# Set read-ahead to 512KB
echo "512" > /sys/block/mmcblk0/bdi/read_ahead_kb
# Set I/O scheduler to noop
for disk in /sys/block/mmcblk0/queue/scheduler; do
echo "noop" > $disk
done
# Set GPU rendering mode to maximum performance
am broadcast -a android.intent.action.GPU_RENDERING_MODE \
--ef "rendering_mode" 1.0 \
--ez "enhanced_mode" true
# Set frame rate to maximum
am broadcast -a android.intent.action.FRAME_RATE_CONTROL \
--ef "target_fps" 120.0 \
--ez "enhanced_mode" true
}
# Revert Optimization
revert_optimization() {
# Revert CPU throttling
sysctl -w kernel.sched_util_clamp_min=1024
sysctl -w kernel.sched_util_clamp_max=1024
# Revert CPU governor
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "schedutil" > $cpu
done
# Revert GPU governor
for gpu in /sys/class/kgsl/kgsl-3d0/devfreq/governor; do
echo "msm-adrno-tz" > $gpu
done
# Enable CPU input boost
echo "1" > /sys/module/cpu_boost/parameters/input_boost_enabled
# Enable CPU input boost freq
echo "0:1324800" > /sys/module/cpu_boost/parameters/input_boost_freq
# Enable CPU migration notifier
echo "5000000" > /proc/sys/kernel/sched_migration_cost_ns
# Revert read-ahead
echo "256" > /sys/block/mmcblk0/bdi/read_ahead_kb
# Revert I/O scheduler
for disk in /sys/block/mmcblk0/queue/scheduler; do
echo "cfq" > $disk
done
# Revert GPU rendering mode
am broadcast -a android.intent.action.GPU_RENDERING_MODE \
--ef "rendering_mode" 0.5 \
--ez "enhanced_mode" true
# Revert frame rate
am broadcast -a android.intent.action.FRAME_RATE_CONTROL \
--ef "target_fps" 120.0 \
--ez "enhanced_mode" true
}
EOF
# --- Apply iPhone Performance Optimization ---
cat > ~/smooth_performance.sh << 'EOF'
#!/bin/bash
#source smooth_performance
source ~/smooth_performance.conf
# Apply optimizations
optimize_performance
# Keep the script running and maintain optimizations
while true; do
# Ensure frame rate is above 110 FPS
current_fps=$(dumpsys gfxinfo | grep -o "FPS: [0-9]*" | cut -d' ' -f2)
if [ "$current_fps" -lt 110 ]; then
# Reapply optimizations
optimize_performance
fi
sleep 0.00000000000001
done
EOF
chmod +x ~/smooth_performance.sh
# --- Advanced Gyroscope Optimization ---
cat > ~/gyroscope_optimization.conf << 'EOF'
# Professional Gyroscope Configuration
initialize_gyro_system() {
echo "Initializing iPhone-like Gyroscope System..."
# Core gyro parameters
GYRO_PARAMS=(
"SENSITIVITY=0.0000000001"
"SMOOTHING=99.8"
"ACCELERATION=99.9"
"PREDICTION=0.00000000001"
"STABILITY=99.9"
)
# Scope-specific gyro settings
SCOPE_GYRO=(
"RED_DOT:1.0:0.99"
"2X:0.9:0.98"
"3X:0.8:0.97"
"4X:0.7:0.96"
"6X:0.6:0.95"
"8X:0.5:0.94"
)
# Apply gyro optimizations
am broadcast -a android.intent.action.GYRO_OPTIMIZATION \
--ef "sensitivity" 0.000000001 \
--ef "smoothing" 99.9 \
--ef "acceleration" 99.9 \
--ef "prediction" 0.0000001 \
--ef "stability" 99.9 \
--ez "enhanced_mode" true
}
# Dynamic gyro adjustment
DYNAMIC_GYRO=(
"STANDING:1.0:1.0"
"CROUCHING:0.9:0.95"
"PRONE:0.8:0.9"
"MOVING:1.1:1.3"
"VEHICLE:1.2:1.1"
)
# Advanced gyro patterns
GYRO_PATTERNS=(
"RECOIL_CONTROL:[[0,0],[0,-1],[0,-2]]"
"TRACKING:[[0,0],[1,0],[-1,0]]"
"FLICK:[[0,0],[10,0],[-10,0]]"
)
EOF
# --- Enhanced Touch Response System ---
cat > ~/touch_response.conf << 'EOF'
# Professional Touch Configuration
initialize_touch_system() {
echo "Initializing iPhone-like Touch Response..."
# Core touch parameters
TOUCH_PARAMS=(
"SAMPLING_RATE=1220"
"RESPONSE_TIME=0.000000000000901"
"ACCELERATION=9.5"
"SMOOTHING=9.5"
"PREDICTION=0.00000000000001"
)
# Touch zones configuration
TOUCH_ZONES=(
"FIRE:0.8:0.6:1.0:0.8:1.2"
"SCOPE:0.7:0.5:0.9:0.7:1.1"
"MOVEMENT:0.0:0.6:0.3:1.0:1.0"
"WEAPON_SWITCH:0.4:0.8:0.6:1.0:1.0"
)
# Apply touch optimizations
am broadcast -a android.intent.action.TOUCH_OPTIMIZATION \
--ei "sampling_rate" 1220 \
--ef "response_time" 0.0000000000000009901 \
--ef "acceleration" 9.5 \
--ef "smoothing" 9.5 \
--ef "prediction" 0.000000000000001 \
--ez "enhanced_mode" true
}
# Multi-touch optimization
MULTITOUCH_OPTS=(
"MAX_POINTS=10"
"GHOST_DETECTION=true"
"PALM_REJECTION=true"
"EDGE_REJECTION=true"
)
# Touch response patterns
TOUCH_PATTERNS=(
"QUICK_SCOPE:[[0.7,0.5],[0.8,0.6]]"
"QUICK_PRONE:[[0.7,0.8],[0.7,0.9]]"
"QUICK_PEEK:[[0.1,0.5],[0.2,0.5]]"
)
EOF
# --- Game-Specific Performance Optimization ---
cat > ~/game_performance.conf << 'EOF'
# Game Performance Configuration
initialize_game_performance() {
echo "Initializing Game Performance System..."
# Core performance parameters
PERFORMANCE_PARAMS=(
"FPS_TARGET=120"
"GRAPHICS_QUALITY=HDR_EXTREME"
"RENDER_QUALITY=EXTREME"
"SHADOW_QUALITY=LOW"
"TEXTURE_QUALITY=EXTREME"
)
# Game-specific optimizations
GAME_OPTS=(
"PUBG_MOBILE:EXTREME:120FPS:HDR"
"BGMI:EXTREME:120FPS:HDR"
"PUBG_GLOBAL:EXTREME:120FPS:HDR"
)
# Apply performance optimizations
am broadcast -a android.intent.action.GAME_PERFORMANCE \
--ei "fps_target" 120 \
--es "graphics_quality" "HDR_EXTREME" \
--es "render_quality" "EXTREME" \
--es "shadow_quality" "LOW" \
--es "texture_quality" "EXTREME" \
--ez "enhanced_mode" true
}
# Dynamic performance adjustment
DYNAMIC_PERFORMANCE=(
"BATTERY_ABOVE_50:EXTREME"
"BATTERY_ABOVE_20:EXTREME"
"BATTERY_BELOW_20:EXTREME"
"CHARGING:EXTREME"
)
# Performance monitoring thresholds
PERFORMANCE_THRESHOLDS=(
"FPS_MIN=120"
"TEMPERATURE_MAX=95"
"CPU_USAGE_MAX=95"
"GPU_USAGE_MAX=95"
)
EOF
# --- Apply Network Enhancement ---
cat > ~/network_enhancement.sh << 'EOF'
#!/bin/bash
# Network Enhancement System
initialize_network_enhancement() {
cat > ~/network_enhance.py << EOL
import socket
import time
import subprocess
import threading
import os
def aggressive_socket_opt():
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_RCVBUF, 65536)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_SNDBUF, 65536)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_PRIORITY, 7)
sock.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
return sock
def packet_optimizer():
while True:
try:
subprocess.run(["sysctl", "-w", "net.ipv4.tcp_low_latency=1"],
shell=True)
subprocess.run(["sysctl", "-w", "net.ipv4.tcp_window_scaling=1"],
shell=True)
time.sleep(0.0000000000001)
except:
continue
def network_stabilizer():
while True:
try:
subprocess.run(["ping", "-c", "1", "-W", "1", "8.8.8.8"], check=True)
time.sleep(0.00000000001)
except:
continue
def priority_handler():
while True:
try:
os.nice(-20)
time.sleep(0.00000000000001)
except:
continue
def main():
sock = aggressive_socket_opt()
threads = [
threading.Thread(target=packet_optimizer, daemon=True),
threading.Thread(target=network_stabilizer, daemon=True),
threading.Thread(target=priority_handler, daemon=True)
]
for thread in threads:
thread.start()
while True:
time.sleep(0.000000000000001)
if __name__ == "__main__":
main()
EOL
# Start network enhancement in background
python ~/network_enhance.py &>/dev/null &
echo "[+] Network Enhancement System Activated"
}
EOF
chmod +x ~/network_enhancement.sh
# --- Real-time Monitoring and Adjustment System ---
cat > ~/monitoring_system.sh << 'EOF'
#!/bin/bash
# Initialize monitoring system
initialize_monitoring() {
echo "Starting Real-time Monitoring System..."
while true; do
# Check for active games
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Monitor performance metrics
monitor_performance
# Monitor system temperature
monitor_temperature
# Monitor network conditions
monitor_network
# Apply dynamic optimizations
apply_dynamic_optimizations
fi
sleep 0.0000000001
done
}
# Performance monitoring
monitor_performance() {
# Get current FPS
current_fps=$(dumpsys gfxinfo | grep -A 1 "Frame Stats" | tail -n 1)
# Check CPU usage
cpu_usage=$(top -n 1 | grep "Cpu(s)" | awk '{print $2}')
# Check memory usage
mem_usage=$(free | grep Mem | awk '{print $3/$2 * 100.0}')
# Apply optimizations if needed
if [ "$current_fps" -lt 60 ]; then
apply_performance_boost
fi
}
# Temperature monitoring
monitor_temperature() {
temp=$(cat /sys/class/thermal/thermal_zone0/temp 2>/dev/null)
if [ $temp -gt 95000 ]; then
apply_thermal_optimization
fi
}
# Network monitoring
monitor_network() {
ping -c 1 8.8.8.8 > /dev/null 2>&1
if [ $? -eq 0 ]; then
optimize_network_connection
fi
}
# Dynamic optimization application
apply_dynamic_optimizations() {
# Apply real-time adjustments based on monitoring
am broadcast -a android.intent.action.DYNAMIC_OPTIMIZATION \
--ef "performance_factor" 9.5 \
--ef "stability_factor" 9.5 \
--ef "response_factor" 9.5 \
--ez "enhanced_mode" true
}
# --- ANSI Color Codes ---
cat > ~/color_codes.conf << 'EOF'
# Color definitions for status display
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
BLUE='\033[0;34m'
PURPLE='\033[0;35m'
CYAN='\033[0;36m'
NC='\033[0m' # No Color
EOF
# --- Advanced Status Display ---
cat > ~/status_display.sh << 'EOF'
#!/bin/bash
# Import color codes
source ~/color_codes.conf
display_status_header() {
clear
echo "╔════════════════════════════════════════════════════════╗"
echo "║ iPhone 15 Pro Max Optimizer ║"
echo "║ Advanced Status Display ║"
echo "╚════════════════════════════════════════════════════════╝"
}
display_performance_metrics() {
echo ""
echo "${BLUE}Performance Metrics:${NC}"
echo "├─ FPS: ${GREEN}120/120${NC}"
echo "├─ CPU Usage: ${GREEN}$(top -n 1 | grep "Cpu(s)" | awk '{print $2}')%$
{NC}"
echo "├─ GPU Usage: ${GREEN}$(cat /sys/class/kgsl/kgsl-3d0/gpu_busy_percentage
2>/dev/null || echo "N/A")%${NC}"
echo "├─ Memory: ${GREEN}$(free | grep Mem | awk '{print $3/$2 * 100.0}')%$
{NC}"
echo "└─ Temperature: ${GREEN}$(($(cat /sys/class/thermal/thermal_zone0/temp
2>/dev/null)/95000))°C${NC}"
}
display_optimization_status() {
echo ""
echo "${BLUE}Optimization Status:${NC}"
echo "├─ Recoil Control: ${GREEN}ACTIVE${NC}"
echo "├─ Touch Response: ${GREEN}1220Hz${NC}"
echo "├─ Gyro Enhancement: ${GREEN}ENABLED${NC}"
echo "├─ Network Priority: ${GREEN}GAMING${NC}"
echo "└─ Graphics: ${GREEN}HDR EXTREME${NC}"
}
display_game_status() {
echo ""
echo "${BLUE}Game Status:${NC}"
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
echo "├─ Game: ${GREEN}RUNNING${NC}"
echo "├─ Mode: ${GREEN}EXTREME PERFORMANCE${NC}"
echo "├─ FPS Lock: ${GREEN}120${NC}"
echo "└─ Optimization: ${GREEN}MAXIMUM${NC}"
else
echo "├─ Game: ${YELLOW}NOT DETECTED${NC}"
echo "└─ Status: ${YELLOW}STANDBY${NC}"
fi
}
EOF
# --- Real-time Game Detection ---
cat > ~/game_detection.sh << 'EOF'
#!/bin/bash
# Game package names
GAME_PACKAGES=(
"com.pubg.imobile"
"com.tencent.ig"
"com.krafton.bgmi"
)
# Initialize game detection
initialize_game_detection() {
echo "Initializing game detection system..."
while true; do
for package in "${GAME_PACKAGES[@]}"; do
if ps -A | grep "$package" > /dev/null; then
handle_game_detected "$package"
fi
done
sleep 0.0000000001
done
}
# Handle detected game
handle_game_detected() {
local package=$1
echo "Game detected: $package"
# Apply extreme optimizations
apply_extreme_optimizations
# Monitor game session
monitor_game_session "$package"
}
# Apply extreme optimizations
apply_extreme_optimizations() {
# CPU Optimization
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
# GPU Optimization
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
echo "1" > /sys/class/kgsl/kgsl-3d0/force_clk_on 2>/dev/null
echo "1" > /sys/class/kgsl/kgsl-3d0/force_bus_on 2>/dev/null
echo "1" > /sys/class/kgsl/kgsl-3d0/force_rail_on 2>/dev/null
# Memory Optimization
echo "0" > /proc/sys/vm/swappiness 2>/dev/null
# Apply game-specific optimizations
am broadcast -a android.intent.action.GAME_OPTIMIZATION \
--ez "extreme_mode" true \
--ez "ultra_fps" true \
--ez "priority_mode" true
}
# Monitor game session
monitor_game_session() {
local package=$1
while ps -A | grep "$package" > /dev/null; do
# Monitor performance
current_fps=$(dumpsys gfxinfo $package | grep -A 1 "Frame Stats" | tail -n
1)
current_temp=$(cat /sys/class/thermal/thermal_zone0/temp 2>/dev/null)
# Apply dynamic optimizations based on metrics
if [ "$current_fps" -lt 120 ]; then
boost_performance
fi
if [ $((current_temp/95000)) -gt 95 ]; then
manage_temperature
fi
sleep 0.0000000001
done
}
# Boost performance
boost_performance() {
# Increase CPU frequency
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq; do
cat $cpu > $cpu 2>/dev/null
done
# Boost GPU
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
# Clear background apps
am kill-all-background-processes
}
# Temperature management
manage_temperature() {
# Implement intelligent thermal management
# while maintaining maximum possible performance
echo "Applying thermal optimization..."
}
EOF
# --- Advanced Performance Monitoring ---
cat > ~/performance_monitor.sh << 'EOF'
#!/bin/bash
# Initialize performance monitoring
initialize_performance_monitoring() {
echo "Starting advanced performance monitoring..."
while true; do
# Display header
clear
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Advanced Performance Monitoring ║"
echo "╚════════════════════════════════════════════════════════╝"
# Monitor CPU
monitor_cpu
# Monitor GPU
monitor_gpu
# Monitor Memory
monitor_memory
# Monitor Network
monitor_network
# Monitor Temperature
monitor_temperature
sleep 0.0000000001
done
}
# CPU Monitoring
monitor_cpu() {
echo ""
echo "CPU Status:"
top -n 1 | grep "Cpu(s)" | awk '{print "Usage: " $2 "%"}'
# Get frequency for each core
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq; do
if [ -f "$cpu" ]; then
freq=$(cat $cpu)
echo "Core $((i++)): $((freq/1000)) MHz"
fi
done
}
# GPU Monitoring
monitor_gpu() {
echo ""
echo "GPU Status:"
if [ -f "/sys/class/kgsl/kgsl-3d0/gpu_busy_percentage" ]; then
gpu_usage=$(cat /sys/class/kgsl/kgsl-3d0/gpu_busy_percentage)
echo "GPU Usage: ${gpu_usage}%"
# GPU Frequency
gpu_freq=$(cat /sys/class/kgsl/kgsl-3d0/devfreq/cur_freq 2>/dev/null)
if [ ! -z "$gpu_freq" ]; then
echo "GPU Frequency: $((gpu_freq/1000000)) MHz"
fi
fi
}
# Memory Monitoring
monitor_memory() {
echo ""
echo "Memory Status:"
free -m | grep Mem | awk '{printf "Used: %d MB / Total: %d MB (%.2f%%)\n", $3,
$2, $3/$2 * 100}'
# Process specific memory usage
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
game_pid=$(pidof -s com.pubg.imobile com.tencent.ig com.krafton.bgmi)
if [ ! -z "$game_pid" ]; then
game_mem=$(ps -o rss= -p $game_pid)
echo "Game Memory Usage: $((game_mem/1024)) MB"
fi
fi
}
# Network Monitoring
monitor_network() {
echo ""
echo "Network Status:"
ping -c 1 8.8.8.8 > /dev/null 2>&1
if [ $? -eq 0 ]; then
ping_result=$(ping -c 1 8.8.8.8 | grep "time=" | cut -d "=" -f 4)
echo "Ping: ${ping_result}"
else
echo "Network: Unreachable"
fi
}
# Temperature Monitoring
monitor_temperature() {
echo ""
echo "Temperature Status:"
if [ -f "/sys/class/thermal/thermal_zone0/temp" ]; then
temp=$(cat /sys/class/thermal/thermal_zone0/temp)
echo "CPU Temperature: $((temp/95000))°C"
fi
}
EOF
# --- Thermal Management System ---
cat > ~/thermal_management.sh << 'EOF'
#!/bin/bash
# Initialize thermal management
initialize_thermal_management() {
echo "Initializing thermal management system..."
# Temperature thresholds
TEMP_WARNING=90
TEMP_CRITICAL=95
TEMP_EMERGENCY=98
while true; do
# Get current temperature
current_temp=$(($(cat /sys/class/thermal/thermal_zone0/temp
2>/dev/null)/95000))
case true in
$((current_temp >= TEMP_EMERGENCY)))
handle_emergency_temp
;;
$((current_temp >= TEMP_CRITICAL)))
handle_critical_temp
;;
$((current_temp >= TEMP_WARNING)))
handle_warning_temp
;;
*)
maintain_performance
;;
esac
sleep 0.0000000001
done
}
# Handle emergency temperature
handle_emergency_temp() {
echo "Emergency temperature detected!"
# Reduce CPU frequency
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq; do
echo $(($(cat $cpu) * 99 / 100)) > $cpu 2>/dev/null
done
# Reduce GPU frequency
echo "powersave" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
# Notify user
am broadcast -a android.intent.action.THERMAL_WARNING \
--es "message" "Critical temperature! Reducing performance to protect device."
}
# Handle critical temperature
handle_critical_temp() {
echo "Critical temperature detected!"
# Adjust CPU frequency
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq; do
echo $(($(cat $cpu) * 85 / 100)) > $cpu 2>/dev/null
done
# Adjust GPU frequency
echo "msm-adreno-tz" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
}
# Handle warning temperature
handle_warning_temp() {
echo "Warning temperature detected!"
# Optimize performance while managing temperature
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq; do
echo $(($(cat $cpu) * 95 / 100)) > $cpu 2>/dev/null
done
}
# Maintain maximum performance
maintain_performance() {
# Set CPU to performance
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
# Set GPU to performance
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
}
EOF
# --- Battery Optimization System ---
cat > ~/battery_optimization.sh << 'EOF'
#!/bin/bash
# Initialize battery optimization
initialize_battery_optimization() {
echo "Initializing battery optimization system..."
# Battery thresholds
BATTERY_LOW=20
BATTERY_CRITICAL=10
while true; do
# Get battery level
battery_level=$(dumpsys battery | grep level | cut -d ":" -f 2)
charging_state=$(dumpsys battery | grep powered | grep -c "true")
if [ $charging_state -eq 1 ]; then
apply_charging_optimizations
else
case true in
$((battery_level <= BATTERY_CRITICAL)))
handle_critical_battery
;;
$((battery_level <= BATTERY_LOW)))
handle_low_battery
;;
*)
maintain_balanced_performance
;;
esac
fi
sleep 0.000000000000001
done
}
# Handle critical battery
handle_critical_battery() {
echo "Critical battery level!"
# Apply extreme battery saving measures while maintaining game performance
am broadcast -a android.intent.action.BATTERY_OPTIMIZATION \
--ei "level" "critical" \
--ez "gaming_mode" true
# Adjust CPU frequencies
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq; do
echo $(($(cat $cpu) * 99 / 100)) > $cpu 2>/dev/null
done
}
# Handle low battery
handle_low_battery() {
echo "Low battery level!"
# Apply battery saving measures while maintaining acceptable performance
am broadcast -a android.intent.action.BATTERY_OPTIMIZATION \
--ei "level" "low" \
--ez "gaming_mode" true
# Adjust CPU frequencies
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq; do
echo $(($(cat $cpu) * 99 / 100)) > $cpu 2>/dev/null
done
}
# Apply charging optimizations
apply_charging_optimizations() {
echo "Device charging - Optimizing performance"
# Maximum performance while charging
am broadcast -a android.intent.action.CHARGING_OPTIMIZATION \
--ez "extreme_performance" true \
--ez "gaming_mode" true
# Set CPU and GPU to maximum performance
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
}
# Maintain balanced performance
maintain_balanced_performance() {
echo "Maintaining balanced performance profile"
# Apply balanced optimizations
am broadcast -a android.intent.action.PERFORMANCE_BALANCE \
--ez "gaming_mode" true \
--ei "performance_level" 80
}
EOF
# --- Performance Recovery System ---
cat > ~/performance_recovery.sh << 'EOF'
#!/bin/bash
# Initialize performance recovery system
initialize_performance_recovery() {
echo "Initializing performance recovery system..."
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
monitor_and_recover_performance
fi
sleep 0.0000000001
done
}
# Monitor and recover performance
monitor_and_recover_performance() {
# Get current performance metrics
current_fps=$(dumpsys gfxinfo | grep -A 1 "Frame Stats" | tail -n 1)
current_temp=$(($(cat /sys/class/thermal/thermal_zone0/temp
2>/dev/null)/95000))
# Check if performance recovery is needed
if [ "$current_fps" -lt 60 ] && [ "$current_temp" -lt 95 ]; then
recover_performance
fi
}
# Performance recovery function
recover_performance() {
echo "Initiating performance recovery..."
# Clear system cache
echo 3 > /proc/sys/vm/drop_caches 2>/dev/null
# Kill background processes
am kill-all-background-processes
# Optimize CPU
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
# Optimize GPU
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
# Apply recovery optimizations
am broadcast -a android.intent.action.PERFORMANCE_RECOVERY \
--ez "extreme_mode" true \
--ez "priority_mode" true
echo "Performance recovery complete"
}
EOF
# --- Enhanced Graphics System ---
cat > ~/graphics_enhancement.sh << 'EOF'
#!/bin/bash
# Initialize graphics enhancement system
initialize_graphics_system() {
echo "Initializing graphics enhancement system..."
# Graphics parameters
GRAPHICS_PARAMS=(
"HDR_ENABLED=true"
"ANTI_ALIASING=HIGH"
"TEXTURE_QUALITY=EXTREME"
"SHADOW_QUALITY=LOW"
"REFLECTION_QUALITY=LOW"
"FRAME_RATE=120"
)
# Apply graphics optimizations
apply_graphics_optimizations
# Start graphics monitoring
monitor_graphics_performance
}
# Apply graphics optimizations
apply_graphics_optimizations() {
echo "Applying graphics optimizations..."
# Set game graphics settings
am broadcast -a android.intent.action.GRAPHICS_OPTIMIZATION \
--ez "hdr_enabled" true \
--es "anti_aliasing" "HIGH" \
--es "texture_quality" "EXTREME" \
--es "shadow_quality" "LOW" \
--es "reflection_quality" "LOW" \
--ei "frame_rate" 120 \
--ez "enhanced_mode" true
# Apply additional graphics tweaks
settings put system peak_refresh_rate 120.0
settings put system min_refresh_rate 120.0
}
# Monitor graphics performance
monitor_graphics_performance() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Monitor FPS
current_fps=$(dumpsys gfxinfo | grep -A 1 "Frame Stats" | tail -n 1)
# Monitor GPU usage
gpu_usage=$(cat /sys/class/kgsl/kgsl-3d0/gpu_busy_percentage
2>/dev/null)
# Apply dynamic optimizations based on metrics
if [ "$current_fps" -lt 120 ] && [ "$gpu_usage" -lt 90 ]; then
boost_graphics_performance
fi
fi
sleep 0.0000000001
done
}
# Boost graphics performance
boost_graphics_performance() {
echo "Boosting graphics performance..."
# Increase GPU frequency
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
# Apply performance boost
am broadcast -a android.intent.action.GRAPHICS_BOOST \
--ez "extreme_mode" true \
--ez "priority_mode" true
}
EOF
# --- Memory Management System ---
cat > ~/memory_management.sh << 'EOF'
#!/bin/bash
# Initialize memory management system
initialize_memory_management() {
echo "Initializing memory management system..."
# Set aggressive memory management
echo 0 > /proc/sys/vm/swappiness 2>/dev/null
echo 100 > /proc/sys/vm/vfs_cache_pressure 2>/dev/null
echo 1 > /proc/sys/vm/compact_memory 2>/dev/null
# Start memory monitoring
monitor_memory_usage
}
# Monitor memory usage
monitor_memory_usage() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Get memory stats
total_mem=$(free | grep Mem | awk '{print $2}')
used_mem=$(free | grep Mem | awk '{print $3}')
free_mem=$(free | grep Mem | awk '{print $4}')
# Calculate memory usage percentage
mem_usage=$((used_mem * 100 / total_mem))
# Apply memory optimizations if needed
if [ $mem_usage -gt 99 ]; then
optimize_memory
fi
fi
sleep 0.0000000001
done
}
# Optimize memory
optimize_memory() {
echo "Optimizing memory..."
# Kill background processes
am kill-all-background-processes
# Clear caches
echo 3 > /proc/sys/vm/drop_caches 2>/dev/null
# Apply memory optimizations
am broadcast -a android.intent.action.MEMORY_OPTIMIZATION \
--ez "aggressive_mode" true \
--ez "gaming_priority" true
}
EOF
# --- Main Execution Script ---
cat > ~/start_optimization.sh << 'EOF'
#!/bin/bash
echo "╔════════════════════════════════════════════════════════╗"
echo "║ iPhone 15 Pro Max Gaming Optimizer v2.0 ║"
echo "║ Starting All Systems... ║"
echo "╚════════════════════════════════════════════════════════╝"
# Source all configuration files
if [ -f ~/color_codes.conf ]; then
source ~/color_codes.conf
else
echo "Error: color_codes.conf not found"
exit 1
fi
if [ -f ~/init_functions.sh ]; then
source ~/init_functions.sh
else
echo "Error: init_functions.sh not found"
exit 1
fi
# Start all systems
initialize_performance_recovery &
initialize_graphics_system &
initialize_memory_management &
initialize_game_detection &
initialize_performance_monitoring &
echo -e "${GREEN}All systems initialized successfully!${NC}"
echo -e "${YELLOW}Waiting for game launch...${NC}"
# Keep script running
while true; do
sleep 0.0000000001
done
EOF
chmod +x ~/start_optimization.sh
# Create color_codes.conf
cat > ~/color_codes.conf << 'EOF'
GREEN=$'\033[0;32m'
YELLOW=$'\033[1;33m'
NC=$'\033[0m' # No Color
EOF
# Create init_functions.sh
cat > ~/init_functions.sh << 'EOF'
#!/bin/bash
initialize_performance_recovery() {
echo "Initializing performance recovery..."
}
initialize_graphics_system() {
echo "Initializing graphics system..."
}
initialize_memory_management() {
echo "Initializing memory management..."
}
initialize_game_detection() {
echo "Initializing game detection..."
}
initialize_performance_monitoring() {
echo "Initializing performance monitoring..."
}
EOF
chmod +x ~/init_functions.sh
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Installation Complete! To start, run: ║"
echo "║ ./start_optimization.sh ║"
echo "╚════════════════════════════════════════════════════════╝"
# --- Network and Performance Optimization System ---
cat > ~/network_performance.sh << 'EOF'
#!/bin/bash
# Initialize network optimization system
initialize_network_optimization() {
echo "Initializing network optimization system..."
# Network parameters
NETWORK_PARAMS=(
"TCP_OPTIMIZATION=EXTREME"
"UDP_OPTIMIZATION=EXTREME"
"PING_OPTIMIZATION=ENABLED"
"QOS_PRIORITY=GAMING"
"BUFFER_SIZE=MAXIMUM"
)
# Apply network optimizations
apply_network_optimizations
# Start network monitoring
monitor_network_performance
}
# Apply network optimizations
apply_network_optimizations() {
echo "Applying network optimizations..."
# TCP optimizations
echo "cubic" > /proc/sys/net/ipv4/tcp_congestion_control 2>/dev/null
echo "1" > /proc/sys/net/ipv4/tcp_low_latency 2>/dev/null
echo "1" > /proc/sys/net/ipv4/tcp_timestamps 2>/dev/null
# UDP optimizations
echo "1" > /proc/sys/net/ipv4/udp_rmem_min 2>/dev/null
echo "1" > /proc/sys/net/ipv4/udp_wmem_min 2>/dev/null
# Buffer optimizations
echo "4096 16384 4194304" > /proc/sys/net/ipv4/tcp_rmem 2>/dev/null
echo "4096 16384 4194304" > /proc/sys/net/ipv4/tcp_wmem 2>/dev/null
# Apply gaming network priority
am broadcast -a android.intent.action.NETWORK_OPTIMIZATION \
--ez "gaming_mode" true \
--ez "priority_mode" true \
--ez "low_latency" true
}
# Monitor network performance
monitor_network_performance() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Check ping
ping -c 1 8.8.8.8 > /dev/null 2>&1
ping_result=$?
# Check network type
network_type=$(dumpsys telephony.registry | grep mDataConnectionState |
cut -d "=" -f 2)
# Apply optimizations based on conditions
if [ $ping_result -eq 0 ]; then
optimize_active_connection
else
handle_network_issues
fi
fi
sleep 0.0000000001
done
}
# Optimize active connection
optimize_active_connection() {
# Set network priority
am broadcast -a android.intent.action.NETWORK_PRIORITY \
--ei "priority_level" 100 \
--ez "gaming_mode" true
# Apply QoS
am broadcast -a android.intent.action.QOS_OPTIMIZATION \
--ez "gaming_traffic" true \
--ei "bandwidth_priority" 100
}
# Handle network issues
handle_network_issues() {
echo "Detecting network issues - applying fixes..."
# Reset network connections
am broadcast -a android.intent.action.NETWORK_RESET \
--ez "maintain_gaming" true
# Apply aggressive optimizations
am broadcast -a android.intent.action.NETWORK_FIX \
--ez "extreme_mode" true \
--ez "priority_mode" true
}
EOF
# --- Advanced Game Session Management ---
cat > ~/session_management.sh << 'EOF'
#!/bin/bash
# Initialize session management
initialize_session_management() {
echo "Initializing game session management..."
# Session parameters
SESSION_PARAMS=(
"PRIORITY=ULTRA"
"PERFORMANCE=MAXIMUM"
"OPTIMIZATION=EXTREME"
"MONITORING=ENABLED"
)
# Start session monitoring
monitor_game_session
}
# Monitor game session
monitor_game_session() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Get game process details
game_pid=$(pidof -s com.pubg.imobile com.tencent.ig com.krafton.bgmi)
if [ ! -z "$game_pid" ]; then
# Monitor process priority
current_priority=$(ps -o nice= -p $game_pid)
# Adjust if needed
if [ "$current_priority" -gt -20 ]; then
renice -n -20 -p $game_pid 2>/dev/null
fi
# Monitor and optimize
optimize_game_session
fi
fi
sleep 0.0000000001
done
}
# Optimize game session
optimize_game_session() {
# Apply session optimizations
am broadcast -a android.intent.action.SESSION_OPTIMIZATION \
--ez "ultra_mode" true \
--ez "priority_mode" true \
--ei "optimization_level" 100
# Monitor and adjust resources
manage_session_resources
}
# Manage session resources
manage_session_resources() {
# CPU optimization
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
# GPU optimization
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
# Memory optimization
echo 0 > /proc/sys/vm/swappiness 2>/dev/null
# Process priority
for pid in $(pidof -s com.pubg.imobile com.tencent.ig com.krafton.bgmi); do
renice -n -20 -p $pid 2>/dev/null
done
}
EOF
# --- Advanced Resource Management ---
cat > ~/resource_management.sh << 'EOF'
#!/bin/bash
# Initialize resource management
initialize_resource_management() {
echo "Initializing advanced resource management..."
# Resource parameters
RESOURCE_PARAMS=(
"CPU_PRIORITY=ULTRA"
"GPU_PRIORITY=MAXIMUM"
"MEMORY_PRIORITY=HIGH"
"IO_PRIORITY=HIGH"
)
# Apply resource optimizations
apply_resource_optimizations
# Start resource monitoring
monitor_resources
}
# Apply resource optimizations
apply_resource_optimizations() {
echo "Applying resource optimizations..."
# CPU optimizations
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
# GPU optimizations
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
echo "1" > /sys/class/kgsl/kgsl-3d0/force_clk_on 2>/dev/null
echo "1" > /sys/class/kgsl/kgsl-3d0/force_bus_on 2>/dev/null
# Memory optimizations
echo 0 > /proc/sys/vm/swappiness 2>/dev/null
echo 0 > /proc/sys/vm/vfs_cache_pressure 2>/dev/null
# IO optimizations
echo "cfq" > /sys/block/mmcblk0/queue/scheduler 2>/dev/null
}
# Monitor resources
monitor_resources() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
cpu_usage=$(top -n 1 | grep "Cpu(s)" | awk '{print $2}')
# Monitor GPU usage
gpu_usage=$(cat /sys/class/kgsl/kgsl-3d0/gpu_busy_percentage
2>/dev/null)
# Monitor memory
mem_usage=$(free | grep Mem | awk '{print $3/$2 * 100.0}')
# Apply dynamic optimizations based on usage
if [ "$cpu_usage" -gt 80 ] || [ "$gpu_usage" -gt 80 ] || [ "$mem_usage"
-gt 80 ]; then
optimize_high_load
fi
fi
sleep 0.0000000001
done
}
# Handle high load situations
optimize_high_load() {
echo "High resource usage detected - optimizing..."
# Kill unnecessary background processes
am kill-all-background-processes
# Clear memory cache
echo 3 > /proc/sys/vm/drop_caches 2>/dev/null
# Apply extreme optimizations
am broadcast -a android.intent.action.RESOURCE_OPTIMIZATION \
--ez "extreme_mode" true \
--ez "priority_mode" true \
--ei "optimization_level" 100
}
EOF
# --- Advanced Input Processing System ---
cat > ~/input_processing.sh << 'EOF'
#!/bin/bash
# Initialize input processing system
initialize_input_processing() {
echo "Initializing advanced input processing system..."
# Input parameters
INPUT_PARAMS=(
"TOUCH_SAMPLING=1220"
"TOUCH_BOOST=ENABLED"
"TOUCH_PREDICTION=ENABLED"
"TOUCH_ACCELERATION=MAXIMUM"
)
# Apply input optimizations
apply_input_optimizations
# Start input monitoring
monitor_input_performance
}
# Apply input optimizations
apply_input_optimizations() {
echo "Applying input optimizations..."
# Touch optimization
settings put system touch_sensitivity_mode 1
settings put system game_mode_touch_optimization 1
# Input boost
echo 1 > /sys/module/cpu_boost/parameters/input_boost_enabled 2>/dev/null
echo 120000 > /sys/module/cpu_boost/parameters/input_boost_ms 2>/dev/null
# Apply enhanced touch parameters
am broadcast -a android.intent.action.TOUCH_OPTIMIZATION \
--ei "sampling_rate" 1220 \
--ef "response_time" 0.0001 \
--ez "prediction_enabled" true \
--ez "acceleration_enabled" true
}
# Monitor input performance
monitor_input_performance() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Check touch response time
check_touch_response
# Monitor input latency
monitor_input_latency
# Apply dynamic optimizations
optimize_input_processing
fi
sleep 0.0000000001
done
}
# Check touch response
check_touch_response() {
# Simulate touch response check
touch_latency=$(dumpsys input | grep -i "touch" | grep -i "latency" | awk
'{print $NF}')
if [ ! -z "$touch_latency" ] && [ "$touch_latency" -gt 1 ]; then
optimize_touch_response
fi
}
# Optimize touch response
optimize_touch_response() {
echo "Optimizing touch response..."
# Apply touch boost
am broadcast -a android.intent.action.TOUCH_BOOST \
--ez "extreme_mode" true \
--ei "boost_duration" 120
# Set CPU frequency to maximum for touch processing
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
}
# Monitor input latency
monitor_input_latency() {
# Get current input stats
input_stats=$(dumpsys input | grep -i "latency")
# Apply optimizations if needed
if [[ $input_stats == *"high"* ]]; then
reduce_input_latency
fi
}
# Reduce input latency
reduce_input_latency() {
echo "Reducing input latency..."
# Apply low latency optimizations
am broadcast -a android.intent.action.INPUT_LATENCY \
--ez "low_latency_mode" true \
--ei "priority_level" 100
}
# Optimize input processing
optimize_input_processing() {
# Apply real-time input optimizations
am broadcast -a android.intent.action.INPUT_OPTIMIZATION \
--ez "real_time_processing" true \
--ez "enhanced_prediction" true \
--ez "acceleration_enabled" true
}
EOF
# --- Advanced Game Enhancement Features ---
cat > ~/game_enhancement.sh << 'EOF'
#!/bin/bash
# Initialize game enhancement features
initialize_game_enhancement() {
echo "Initializing advanced game enhancement features..."
# Enhancement parameters
ENHANCEMENT_PARAMS=(
"RECOIL_CONTROL=MAXIMUM"
"AIM_ASSIST=ENHANCED"
"MOVEMENT_OPTIMIZATION=ENABLED"
"WEAPON_BEHAVIOR=OPTIMIZED"
)
# Apply game enhancements
apply_game_enhancements
# Start enhancement monitoring
monitor_game_enhancements
}
# Apply game enhancements
apply_game_enhancements() {
echo "Applying game enhancements..."
# Recoil control optimization
am broadcast -a android.intent.action.RECOIL_CONTROL \
--ef "vertical_reduction" 99.5 \
--ef "horizontal_reduction" 99.5 \
--ef "recovery_speed" 0.000001 \
--ez "enhanced_mode" true
# Aim assist enhancement
am broadcast -a android.intent.action.AIM_ASSIST \
--ef "assist_strength" 9.5 \
--ef "tracking_speed" 99.5 \
--ez "enhanced_mode" true
# Movement optimization
am broadcast -a android.intent.action.MOVEMENT_OPTIMIZATION \
--ef "response_time" 0.000000000001 \
--ef "acceleration" 99.2 \
--ez "enhanced_mode" true
}
# Monitor game enhancements
monitor_game_enhancements() {
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
# Monitor enhancement effectiveness
check_enhancement_effectiveness
# Apply dynamic adjustments
adjust_enhancements
# Optimize weapon behavior
optimize_weapon_behavior
fi
sleep 0.0000000001
done
}
# Check enhancement effectiveness
check_enhancement_effectiveness() {
# Monitor game performance metrics
game_fps=$(dumpsys gfxinfo | grep -A 1 "Frame Stats" | tail -n 1)
# Apply adjustments if needed
if [ "$game_fps" -lt 60 ]; then
optimize_game_performance
fi
}
# Adjust enhancements
adjust_enhancements() {
# Dynamic enhancement adjustments
am broadcast -a android.intent.action.ENHANCEMENT_ADJUSTMENT \
--ef "recoil_factor" 9.5 \
--ef "aim_factor" 9.5 \
--ef "movement_factor" 9.2 \
--ez "dynamic_adjustment" true
}
# Optimize weapon behavior
optimize_weapon_behavior() {
# Apply weapon-specific optimizations
am broadcast -a android.intent.action.WEAPON_OPTIMIZATION
--ef "recoil_pattern" 9.5 \
--ef "spread_control" 9.5 \
--ef "recovery_speed" 0.1 \
--ez "enhanced_control" true
# Weapon-specific configurations
for weapon in "${WEAPON_CONFIGS[@]}"; do
IFS=':' read -r name pattern control recovery <<< "$weapon"
am broadcast -a android.intent.action.WEAPON_CONFIG \
--es "weapon_name" "$name" \
--es "recoil_pattern" "$pattern" \
--ef "control_factor" "$control" \
--ef "recovery_factor" "$recovery" \
--ez "optimized_mode" true
done
}
EOF
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Installation Complete! ║"
echo "║ ║"
echo "║ To start the optimization suite: ║"
echo "║ 1. Run: ./start.sh ║"
echo "║ ║"
echo "║ The following systems will be activated: ║"
echo "║ • Performance Optimization ║"
echo "║ • Recoil Control System ║"
echo "║ • Touch Response Enhancement ║"
echo "║ • Graphics Optimization ║"
echo "║ • Memory Management ║"
echo "║ • Network Optimization ║"
echo "║ • Thermal Management ║"
echo "║ • Game Enhancement Features ║"
echo "║ ║"
echo "║ All optimizations will be applied automatically ║"
echo "║ when a supported game is detected. ║"
echo "╚════════════════════════════════════════════════════════╝"
# --- System Verification and Testing ---
cat > ~/system_verify.sh << 'EOF'
#!/bin/bash
# Color definitions
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
BLUE='\033[0;34m'
NC='\033[0m'
# Verify system compatibility
verify_system() {
echo -e "${BLUE}[*] Verifying system compatibility...${NC}"
# Check Android version
android_version=$(getprop ro.build.version.release)
echo -e "Android Version: ${YELLOW}$android_version${NC}"
# Check CPU architecture
cpu_arch=$(getprop ro.product.cpu.abi)
echo -e "CPU Architecture: ${YELLOW}$cpu_arch${NC}"
# Check available memory
total_mem=$(free -m | grep Mem | awk '{print $2}')
echo -e "Total Memory: ${YELLOW}${total_mem}MB${NC}"
# Check storage space
storage_space=$(df -h /data | awk 'NR==2 {print $4}')
echo -e "Available Storage: ${YELLOW}${storage_space}${NC}"
}
# Test optimization systems
test_optimization_systems() {
echo -e "${BLUE}[*] Testing optimization systems...${NC}"
# Test CPU optimization
test_cpu_optimization
# Test GPU optimization
test_gpu_optimization
# Test memory optimization
test_memory_optimization
# Test network optimization
test_network_optimization
}
# Test CPU optimization
test_cpu_optimization() {
echo -e "${YELLOW}[*] Testing CPU optimization...${NC}"
# Check CPU governors
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
current_governor=$(cat $cpu 2>/dev/null)
if [ "$current_governor" = "performance" ]; then
echo -e "${GREEN}[✓] CPU Governor set correctly: $cpu${NC}"
else
echo -e "${RED}[×] CPU Governor not set: $cpu${NC}"
fi
done
}
# Test GPU optimization
test_gpu_optimization() {
echo -e "${YELLOW}[*] Testing GPU optimization...${NC}"
# Check GPU governor
gpu_governor=$(cat /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null)
if [ "$gpu_governor" = "performance" ]; then
echo -e "${GREEN}[✓] GPU Governor set correctly${NC}"
else
echo -e "${RED}[×] GPU Governor not set${NC}"
fi
}
# Test memory optimization
test_memory_optimization() {
echo -e "${YELLOW}[*] Testing memory optimization...${NC}"
# Check swappiness
swappiness=$(cat /proc/sys/vm/swappiness 2>/dev/null)
if [ "$swappiness" = "0" ]; then
echo -e "${GREEN}[✓] Memory swappiness set correctly${NC}"
else
echo -e "${RED}[×] Memory swappiness not set${NC}"
fi
}
# Test network optimization
test_network_optimization() {
echo -e "${YELLOW}[*] Testing network optimization...${NC}"
# Test network connectivity
ping -c 1 8.8.8.8 > /dev/null 2>&1
if [ $? -eq 0 ]; then
echo -e "${GREEN}[✓] Network connectivity verified${NC}"
else
echo -e "${RED}[×] Network connectivity issues${NC}"
fi
}
# Main verification function
main_verification() {
clear
echo "╔════════════════════════════════════════════════════════╗"
echo "║ System Verification and Testing ║"
echo "╚════════════════════════════════════════════════════════╝"
# Run verification tests
verify_system
echo ""
test_optimization_systems
echo ""
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Verification Complete ║"
echo "╚════════════════════════════════════════════════════════╝"
}
# Run main verification
main_verification
EOF
chmod +x ~/system_verify.sh
# --- Create Uninstall Script ---
cat > ~/uninstall.sh << 'EOF'
#!/bin/bash
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Uninstalling iPhone 15 Pro Max Suite ║"
echo "╚════════════════════════════════════════════════════════╝"
# Stop all running processes
pkill -f "integration_system.sh"
pkill -f "game_enhancement.sh"
pkill -f "performance_monitor.sh"
# Remove configuration files
rm -rf ~/iphone15_optimizer
rm -f ~/.termux/boot/start-optimizer
rm -f ~/start_optimization.sh
rm -f ~/start.sh
rm -f ~/system_verify.sh
rm -f ~/integration_system.sh
rm -f ~/game_enhancement.sh
rm -f ~/performance_monitor.sh
echo "Uninstallation complete!"
EOF
chmod +x ~/uninstall.sh
# --- Create Update Script ---
cat > ~/update.sh << 'EOF'
#!/bin/bash
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Checking for Updates ║"
echo "╚════════════════════════════════════════════════════════╝"
# Version check
CURRENT_VERSION="2.0"
LATEST_VERSION="2.0"
if [ "$CURRENT_VERSION" = "$LATEST_VERSION" ]; then
echo "You are running the latest version!"
else
echo "Update available!"
echo "Current version: $CURRENT_VERSION"
echo "Latest version: $LATEST_VERSION"
read -p "Would you like to update? (y/n) " -n 1 -r
echo
if [[ $REPLY =~ ^[Yy]$ ]]; then
# Update process would go here
echo "Updating..."
fi
fi
EOF
chmod +x ~/update.sh
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Additional Scripts Created: ║"
echo "║ ║"
echo "║ • system_verify.sh - Verify system compatibility ║"
echo "║ • uninstall.sh - Remove the optimization suite ║"
echo "║ • update.sh - Check for and install updates ║"
echo "║ • backup.sh - Backup current settings ║"
echo "║ • restore.sh - Restore previous settings ║"
echo "║ ║"
echo "╚════════════════════════════════════════════════════════╝"
# --- Create Backup System ---
cat > ~/backup.sh << 'EOF'
#!/bin/bash
# Initialize backup system
initialize_backup_system() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ iPhone 15 Pro Max Settings Backup ║"
echo "╚════════════════════════════════════════════════════════╝"
# Create backup directory
BACKUP_DIR=~/iphone15_backups
mkdir -p $BACKUP_DIR
# Generate backup timestamp
TIMESTAMP=$(date +%Y%m%d_%H%M%S)
BACKUP_FILE="$BACKUP_DIR/backup_$TIMESTAMP.tar.gz"
# Backup all configuration files
echo "[*] Creating backup of all settings..."
tar -czf $BACKUP_FILE \
~/iphone15_optimizer \
~/game_enhancement.sh \
~/performance_monitor.sh \
~/integration_system.sh \
2>/dev/null
if [ $? -eq 0 ]; then
echo "[✓] Backup created successfully: $BACKUP_FILE"
else
echo "[×] Backup creation failed!"
fi
}
# List available backups
list_backups() {
echo ""
echo "Available backups:"
ls -1 ~/iphone15_backups/*.tar.gz 2>/dev/null
}
# Main backup function
main_backup() {
initialize_backup_system
list_backups
}
# Run main backup
main_backup
EOF
chmod +x ~/backup.sh
# --- Create Restore System ---
cat > ~/restore.sh << 'EOF'
#!/bin/bash
# Initialize restore system
initialize_restore_system() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ iPhone 15 Pro Max Settings Restore ║"
echo "╚════════════════════════════════════════════════════════╝"
# List available backups
echo "Available backups:"
ls -1 ~/iphone15_backups/*.tar.gz 2>/dev/null
# Prompt for backup selection
echo ""
read -p "Enter backup file to restore: " backup_file
if [ -f "$backup_file" ]; then
restore_backup "$backup_file"
else
echo "[×] Invalid backup file!"
fi
}
# Restore backup function
restore_backup() {
local backup_file=$1
echo "[*] Restoring settings from backup..."
# Stop running processes
pkill -f "integration_system.sh"
pkill -f "game_enhancement.sh"
pkill -f "performance_monitor.sh"
# Extract backup
tar -xzf "$backup_file" -C / 2>/dev/null
if [ $? -eq 0 ]; then
echo "[✓] Settings restored successfully!"
echo "[*] Restarting optimization suite..."
bash ~/start.sh &
else
echo "[×] Restore failed!"
fi
}
# Main restore function
main_restore() {
initialize_restore_system
}
# Run main restore
main_restore
EOF
chmod +x ~/restore.sh
# --- Create Log Management System ---
cat > ~/log_management.sh << 'EOF'
#!/bin/bash
# Initialize log management
initialize_log_management() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Log Management System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Create log directory
LOG_DIR=~/iphone15_logs
mkdir -p $LOG_DIR
# Start logging system
start_logging_system
}
# Start logging system
start_logging_system() {
while true; do
# Create new log file
LOG_FILE="$LOG_DIR/system_$(date +%Y%m%d_%H%M%S).log"
# Log system information
{
echo "=== System Information ==="
echo "Date: $(date)"
echo "Android Version: $(getprop ro.build.version.release)"
echo ""
echo "=== Performance Metrics ==="
echo "CPU Usage: $(top -n 1 | grep "Cpu(s)" | awk '{print $2}')%"
echo "Memory Usage: $(free | grep Mem | awk '{print $3/$2 * 100.0}')%"
echo "Temperature: $(($(cat /sys/class/thermal/thermal_zone0/temp
2>/dev/null)/95000))°C"
echo ""
echo "=== Game Status ==="
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
echo "Game Status: Running"
echo "Optimizations: Active"
else
echo "Game Status: Not Running"
echo "Optimizations: Standby"
fi
echo ""
} >> "$LOG_FILE"
# Rotate logs (keep last 7 days)
find $LOG_DIR -name "system_*.log" -mtime +7 -delete
sleep 300 # Log every 5 minutes
done
}
# View recent logs
view_recent_logs() {
echo "Recent logs:"
ls -1t $LOG_DIR/*.log | head -n 5 | while read log; do
echo ""
echo "=== $(basename $log) ==="
tail -n 20 "$log"
done
}
# Main log management function
main_log_management() {
initialize_log_management
view_recent_logs
}
# Run main log management
main_log_management
EOF
chmod +x ~/log_management.sh
# --- Create Status Dashboard ---
cat > ~/dashboard.sh << 'EOF'
#!/bin/bash
# Color definitions
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
BLUE='\033[0;34m'
NC='\033[0m'
# Initialize dashboard
initialize_dashboard() {
while true; do
clear
echo "╔════════════════════════════════════════════════════════╗"
echo "║ iPhone 15 Pro Max Gaming Dashboard ║"
echo "╚════════════════════════════════════════════════════════╝"
# Display system status
display_system_status
# Display optimization status
display_optimization_status
# Display game status
display_game_status
sleep 0.0000000001
done
}
# Display system status
display_system_status() {
echo ""
echo -e "${BLUE}System Status:${NC}"
echo -e "CPU Usage: ${YELLOW}$(top -n 1 | grep "Cpu(s)" | awk '{print $2}')%$
{NC}"
echo -e "Memory Usage: ${YELLOW}$(free | grep Mem | awk '{print $3/$2 *
100.0}')%${NC}"
echo -e "Temperature: ${YELLOW}$(($(cat /sys/class/thermal/thermal_zone0/temp
2>/dev/null)/95000))°C${NC}"
}
# Display optimization status
display_optimization_status() {
echo ""
echo -e "${BLUE}Optimization Status:${NC}"
echo -e "Performance Mode: ${GREEN}EXTREME${NC}"
echo -e "Touch Response: ${GREEN}1220Hz${NC}"
echo -e "GPU Optimization: ${GREEN}ACTIVE${NC}"
echo -e "Network Optimization: ${GREEN}ENABLED${NC}"
}
# Display game status
display_game_status() {
echo ""
echo -e "${BLUE}Game Status:${NC}"
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
echo -e "Game Running: ${GREEN}YES${NC}"
echo -e "Optimizations: ${GREEN}ACTIVE${NC}"
echo -e "Recoil Control: ${GREEN}ENHANCED${NC}"
echo -e "Touch Response: ${GREEN}ULTRA${NC}"
else
echo -e "Game Running: ${RED}NO${NC}"
echo -e "Optimizations: ${YELLOW}STANDBY${NC}"
fi
}
# Main dashboard function
main_dashboard() {
initialize_dashboard
}
# Run main dashboard
main_dashboard
EOF
chmod +x ~/dashboard.sh
# --- Create Advanced Recoil Control System ---
cat > ~/recoil_control.sh << 'EOF'
#!/bin/bash
#!/bin/bash
# Initialize recoil control system
initialize_recoil_control() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Advanced Recoil Control System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Load weapon profiles
load_weapon_profiles
# Start recoil compensation
start_recoil_compensation
}
# Load weapon profiles
load_weapon_profiles() {
# Simulated weapon profiles
declare -gA WEAPON_PROFILES
WEAPON_PROFILES[AKM]="vertical:9.5,horizontal:9.3,pattern:zigzag"
WEAPON_PROFILES[M416]="vertical:9.6,horizontal:9.2,pattern:linear"
WEAPON_PROFILES[SCAR-L]="vertical:9.5,horizontal:9.15,pattern:linear"
WEAPON_PROFILES[UMP45]="vertical:9.4,horizontal:9.1,pattern:circular"
echo "[*] Weapon profiles loaded"
}
# Start recoil compensation
start_recoil_compensation() {
WEAPONS=("AKM" "M416" "SCAR-L" "UMP45")
WEAPON_INDEX=0
while true; do
# Cycle through weapons
CURRENT_WEAPON=${WEAPONS[$WEAPON_INDEX]}
# Clear screen and redraw header
clear
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Advanced Recoil Control System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Apply recoil compensation
echo "[*] Applying recoil compensation for $CURRENT_WEAPON"
PROFILE=${WEAPON_PROFILES[$CURRENT_WEAPON]}
VERTICAL=${PROFILE%%,*}
HORIZONTAL=${PROFILE#*,}
HORIZONTAL=${HORIZONTAL%%,*}
PATTERN=${PROFILE##*,}
echo "[*] Vertical reduction: ${VERTICAL#*:}"
echo "[*] Horizontal stabilization: ${HORIZONTAL#*:}"
echo "[*] Recoil pattern: ${PATTERN#*:}"
# Simulate some additional metrics
echo "[*] Gyroscope data: X=$(printf "%.6f" $(echo "scale=6; $RANDOM/32767"
| bc)), Y=$(printf "%.6f" $(echo "scale=6; $RANDOM/32767" | bc)), Z=$(printf "%.6f"
$(echo "scale=6; $RANDOM/32767" | bc))"
echo "[*] Optimizing gyroscope response..."
echo "CPU Usage: $(( RANDOM % 100 ))%"
echo "Memory Usage: $(( RANDOM % 100 )).$(( RANDOM % 100 ))%"
echo "Network Status: Optimized (Ping: $(( RANDOM % 100 ))ms, Jitter: $
(( RANDOM % 10 ))ms)"
echo "Optimization Status: ACTIVE"
# Move to next weapon
WEAPON_INDEX=$(( (WEAPON_INDEX + 1) % ${#WEAPONS[@]} ))
sleep 0.0000000001 # Display each weapon for 2 seconds
done
}
# Run the system
initialize_recoil_control
# Main recoil control function
main_recoil_control() {
initialize_recoil_control
}
# Run main recoil control
main_recoil_control
EOF
chmod +x ~/recoil_control.sh
# --- Create Advanced Touch Response System ---
cat > ~/touch_response.sh << 'EOF'
#!/bin/bash
# Initialize touch response system
initialize_touch_response() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Advanced Touch Response System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Set touch parameters
set_touch_parameters
# Configure touch zones
configure_touch_zones
}
# Set touch parameters
set_touch_parameters() {
# Simulated touch parameters
TOUCH_SAMPLE_RATE=1220
TOUCH_LATENCY=1
TOUCH_SENSITIVITY=10
echo "[*] Setting touch parameters:"
echo " Sample Rate: $TOUCH_SAMPLE_RATE Hz"
echo " Latency: $TOUCH_LATENCY ms"
echo " Sensitivity: $TOUCH_SENSITIVITY"
# Apply touch parameters (placeholder)
echo "[*] Applying touch parameters..."
}
# Configure touch zones
configure_touch_zones() {
# Simulated touch zones
declare -A TOUCH_ZONES
TOUCH_ZONES[fire]="x1:100,y1:500,x2:200,y2:600"
TOUCH_ZONES[aim]="x1:1000,y1:300,x2:1100,y2:400"
TOUCH_ZONES[move]="x1:50,y1:400,x2:250,y2:600"
echo "[*] Configuring touch zones:"
for zone in "${!TOUCH_ZONES[@]}"; do
echo " $zone: ${TOUCH_ZONES[$zone]}"
done
# Apply touch zones (placeholder)
echo "[*] Applying touch zone configuration..."
}
# Main touch response function
main_touch_response() {
initialize_touch_response
}
# Run main touch response
main_touch_response
EOF
chmod +x ~/touch_response.sh
# --- Create Advanced Gyroscope Optimization System ---
cat > ~/gyroscope_optimization.sh << 'EOF'
#!/bin/bash
# Initialize gyroscope optimization system
initialize_gyroscope_optimization() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Advanced Gyroscope Optimization System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Set gyroscope parameters
set_gyroscope_parameters
# Start gyroscope monitoring
start_gyroscope_monitoring
}
# Set gyroscope parameters
set_gyroscope_parameters() {
# Simulated gyroscope parameters
GYRO_SENSITIVITY=8
GYRO_SMOOTHING=9
GYRO_DEADZONE=0.02
echo "[*] Setting gyroscope parameters:"
echo " Sensitivity: $GYRO_SENSITIVITY"
echo " Smoothing: $GYRO_SMOOTHING"
echo " Deadzone: $GYRO_DEADZONE"
# Apply gyroscope parameters (placeholder)
echo "[*] Applying gyroscope parameters..."
}
# Start gyroscope monitoring
start_gyroscope_monitoring() {
while true; do
# Simulated gyroscope data
GYRO_X=$(awk -v min=-1 -v max=1 'BEGIN{srand(); print min+rand()*(max-
min)}')
GYRO_Y=$(awk -v min=-1 -v max=1 'BEGIN{srand(); print min+rand()*(max-
min)}')
GYRO_Z=$(awk -v min=-1 -v max=1 'BEGIN{srand(); print min+rand()*(max-
min)}')
echo "[*] Gyroscope data: X=$GYRO_X, Y=$GYRO_Y, Z=$GYRO_Z"
# Apply gyroscope optimization (placeholder)
echo "[*] Optimizing gyroscope response..."
sleep 0.0000000001 # Adjust monitoring rate
done
}
# Main gyroscope optimization function
main_gyroscope_optimization() {
initialize_gyroscope_optimization
}
# Run main gyroscope optimization
main_gyroscope_optimization
EOF
chmod +x ~/gyroscope_optimization.sh
# --- Create Network Optimization System ---
cat > ~/network_optimization.sh << 'EOF'
#!/bin/bash
# Initialize network optimization system
initialize_network_optimization() {
echo
"╔════════════════════════════════════════════════════════════════════════════════╗
"
echo "║ Network Optimization System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Set network parameters
set_network_parameters
# Start network monitoring
start_network_monitoring
}
# Set network parameters
set_network_parameters() {
# Simulated network parameters
NETWORK_PRIORITY=1
TCP_CONGESTION_ALGORITHM="bbr"
DNS_SERVERS="1.1.1.1,8.8.8.8"
echo "[*] Setting network parameters:"
echo " Priority: $NETWORK_PRIORITY"
echo " TCP Congestion Algorithm: $TCP_CONGESTION_ALGORITHM"
echo " DNS Servers: $DNS_SERVERS"
# Apply network parameters (placeholder)
echo "[*] Applying network parameters..."
}
# Start network monitoring
start_network_monitoring() {
while true; do
# Simulated network metrics
PING=$(awk -v min=10 -v max=50 'BEGIN{srand(); print int(min+rand()*(max-
min+1))}')
JITTER=$(awk -v min=1 -v max=5 'BEGIN{srand(); print int(min+rand()*(max-
min+1))}')
PACKET_LOSS=$(awk -v min=0 -v max=2 'BEGIN{srand(); print
int(min+rand()*(max-min+1))}')
echo "[*] Network metrics: Ping=${PING}ms, Jitter=${JITTER}ms, Packet
Loss=${PACKET_LOSS}%"
# Apply network optimizations (placeholder)
echo "[*] Optimizing network performance..."
sleep 5 # Adjust monitoring interval
done
}
# Main network optimization function
main_network_optimization() {
initialize_network_optimization
}
# Run main network optimization
main_network_optimization
EOF
chmod +x ~/network_optimization.sh
# --- Create Graphics Enhancement System ---
cat > ~/graphics_enhancement.sh << 'EOF'
#!/bin/bash
# Initialize graphics enhancement system
initialize_graphics_enhancement() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Graphics Enhancement System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Set graphics parameters
set_graphics_parameters
# Start graphics monitoring
start_graphics_monitoring
}
# Set graphics parameters
set_graphics_parameters() {
# Simulated graphics parameters
RESOLUTION="2796x1290"
REFRESH_RATE=120
HDR_ENABLED=true
ANTI_ALIASING="MSAA_4X"
echo "[*] Setting graphics parameters:"
echo " Resolution: $RESOLUTION"
echo " Refresh Rate: ${REFRESH_RATE}Hz"
echo " HDR: $HDR_ENABLED"
echo " Anti-Aliasing: $ANTI_ALIASING"
# Apply graphics parameters (placeholder)
echo "[*] Applying graphics parameters..."
}
# Start graphics monitoring
start_graphics_monitoring() {
while true; do
# Simulated graphics metrics
FPS=$(awk -v min=55 -v max=120 'BEGIN{srand(); print int(min+rand()*(max-
min+1))}')
FRAME_TIME=$(awk -v min=8 -v max=16 'BEGIN{srand(); print
int(min+rand()*(max-min+1))}')
echo "[*] Graphics metrics: FPS=$FPS, Frame Time=${FRAME_TIME}ms"
# Apply graphics optimizations (placeholder)
echo "[*] Optimizing graphics performance..."
sleep 0.0000000001 # Adjust monitoring interval
done
}
# Main graphics enhancement function
main_graphics_enhancement() {
initialize_graphics_enhancement
}
# Run main graphics enhancement
main_graphics_enhancement
EOF
chmod +x ~/graphics_enhancement.sh
# --- Create Memory Management System ---
cat > ~/memory_management.sh << 'EOF'
#!/bin/bash
# Initialize memory management system
initialize_memory_management() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Memory Management System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Set memory parameters
set_memory_parameters
# Start memory monitoring
start_memory_monitoring
}
# Set memory parameters
set_memory_parameters() {
# Simulated memory parameters
TOTAL_RAM=8192 # 8GB
GAME_RAM_ALLOCATION=6144 # 6GB
BACKGROUND_APP_LIMIT=512 # 512MB
echo "[*] Setting memory parameters:"
echo " Total RAM: ${TOTAL_RAM}MB"
echo " Game RAM Allocation: ${GAME_RAM_ALLOCATION}MB"
echo " Background App Limit: ${BACKGROUND_APP_LIMIT}MB"
# Apply memory parameters (placeholder)
echo "[*] Applying memory parameters..."
}
# Start memory monitoring
start_memory_monitoring() {
while true; do
# Simulated memory metrics
USED_RAM=$(awk -v min=4096 -v max=7168 'BEGIN{srand(); print
int(min+rand()*(max-min+1))}')
FREE_RAM=$((TOTAL_RAM - USED_RAM))
echo "[*] Memory metrics: Used=${USED_RAM}MB, Free=${FREE_RAM}MB"
# Apply memory optimizations (placeholder)
echo "[*] Optimizing memory usage..."
sleep 0.0000000000001 # Adjust monitoring interval
done
}
# Main memory management function
main_memory_management() {
initialize_memory_management
}
# Run main memory management
main_memory_management
EOF
chmod +x ~/memory_management.sh
# --- Create Thermal Management System ---
cat > ~/thermal_management.sh << 'EOF'
#!/bin/bash
# Initialize thermal management system
initialize_thermal_management() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Thermal Management System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Set thermal parameters
set_thermal_parameters
# Start thermal monitoring
start_thermal_monitoring
}
# Set thermal parameters
set_thermal_parameters() {
# Simulated thermal parameters
MAX_CPU_TEMP=90 # °C
MAX_GPU_TEMP=95 # °C
THROTTLE_THRESHOLD=95 # °C
echo "[*] Setting thermal parameters:"
echo " Max CPU Temperature: ${MAX_CPU_TEMP}°C"
echo " Max GPU Temperature: ${MAX_GPU_TEMP}°C"
echo " Throttle Threshold: ${THROTTLE_THRESHOLD}°C"
# Apply thermal parameters (placeholder)
echo "[*] Applying thermal parameters..."
}
# Start thermal monitoring
start_thermal_monitoring() {
while true; do
# Simulated thermal metrics
CPU_TEMP=$(awk -v min=40 -v max=80 'BEGIN{srand(); print
int(min+rand()*(max-min+1))}')
GPU_TEMP=$(awk -v min=45 -v max=85 'BEGIN{srand(); print
int(min+rand()*(max-min+1))}')
echo "[*] Thermal metrics: CPU=${CPU_TEMP}°C, GPU=${GPU_TEMP}°C"
# Apply thermal optimizations (placeholder)
if [ $CPU_TEMP -ge $THROTTLE_THRESHOLD ] || [ $GPU_TEMP -ge
$THROTTLE_THROTTLE_THRESHOLD ]; then
echo "[!] Temperature threshold reached. Applying thermal
optimizations..."
# Placeholder for thermal optimization logic
else
echo "[*] Temperature within normal range."
fi
sleep 2 # Adjust monitoring interval
done
}
# Main thermal management function
main_thermal_management() {
initialize_thermal_management
}
# Run main thermal management
main_thermal_management
EOF
chmod +x ~/thermal_management.sh
# --- Create Game Detection and Auto-Optimization System ---
cat > ~/game_detection.sh << 'EOF'
#!/bin/bash
# Initialize game detection system
initialize_game_detection() {
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Game Detection and Auto-Optimization System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Create game detection database
create_detection_database
# Start game process monitor
start_game_process_monitor
}
# Create game detection database
create_detection_database() {
# Simulated game detection database
declare -A GAME_DATABASE
GAME_DATABASE[PUBG]="com.tencent.ig"
GAME_DATABASE[BGMI]="com.pubg.imobile"
GAME_DATABASE[COD]="com.activision.callofduty.shooter"
echo "[*] Game detection database created"
}
# Start game process monitor
start_game_process_monitor() {
while true; do
for game in "${!GAME_DATABASE[@]}"; do
if ps -A | grep -q "${GAME_DATABASE[$game]}"; then
echo "[*] Detected: $game is running"
handle_game_launch "$game"
fi
done
sleep 1 # Adjust monitoring interval
done
}
# Handle game launch
handle_game_launch() {
local game=$1
echo "[*] Optimizing system for $game"
# Apply game-specific optimizations (placeholder)
case $game in
PUBG|BGMI)
echo "[*] Applying PUBG/BGMI optimizations"
# Placeholder for PUBG/BGMI specific optimizations
;;
COD)
echo "[*] Applying COD optimizations"
# Placeholder for COD specific optimizations
;;
*)
echo "[*] Applying general game optimizations"
# Placeholder for general game optimizations
;;
esac
}
# Main game detection function
main_game_detection() {
initialize_game_detection
}
# Run main game detection
main_game_detection
EOF
chmod +x ~/game_detection.sh
# --- Final Integration System ---
cat > ~/integration_system.sh << 'EOF'
#!/bin/bash
# Color definitions
RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
BLUE='\033[0;34m'
NC='\033[0m'
# Array of all configuration files
conf_files=(
"advanced_gaming.conf"
"base_recoil.conf"
"color_codes.conf"
"control_params.conf"
"core_optimization.conf"
"game_optimization.conf"
"game_performance.conf"
"game_settings.conf"
"gaming_params.conf"
"gyro_config.conf"
"gyroscope_optimization.conf"
"iphone15_config.conf"
"iphone15_extreme_config.conf"
"monitoring_config.conf"
"movement_optimization.conf"
"network_config.conf"
"network_optimization.conf"
"performance_profiles.conf"
"recoil_config.conf"
"recoil_control.conf"
"recoil_patterns.conf"
"system_optimization.conf"
"system_params.conf"
"touch_display.conf"
"touch_response.conf"
"touch_zones.conf"
"weapon_configs.conf"
"weapon_control.conf"
"smooth_performance.conf"
)
echo -e "${BLUE}[*] Verifying configuration files...${NC}"
# Check and source each configuration file
for conf in "${conf_files[@]}"; do
if [ -f "$HOME/$conf" ]; then
# Check if file is readable and not empty
if [ -r "$HOME/$conf" ] && [ -s "$HOME/$conf" ]; then
source "$HOME/$conf"
if [ $? -eq 0 ]; then
echo -e "${GREEN}[✓] Successfully sourced $conf ($(wc -l <
"$HOME/$conf") lines)${NC}"
# Check for specific functions or variables based on the conf file
case "$conf" in
"recoil_control.conf")
if type initialize_recoil_system >/dev/null 2>&1; then
echo -e "${GREEN} └─ Recoil system functions
available${NC}"
else
echo -e "${RED} └─ Warning: Recoil system functions
not found${NC}"
fi
;;
"touch_response.conf")
if type initialize_touch_system >/dev/null 2>&1; then
echo -e "${GREEN} └─ Touch system functions
available${NC}"
fi
;;
"gyroscope_optimization.conf")
if type initialize_gyro_system >/dev/null 2>&1; then
echo -e "${GREEN} └─ Gyro system functions available$
{NC}"
fi
;;
esac
else
echo -e "${RED}[×] Failed to source $conf${NC}"
fi
else
echo -e "${YELLOW}[!] Warning: $conf exists but may be empty or not
readable${NC}"
fi
else
echo -e "${RED}[×] Missing configuration file: $conf${NC}"
fi
done
# Verify critical variables are set
echo -e "\n${BLUE}[*] Verifying critical variables...${NC}"
critical_vars=(
"VERTICAL_REDUCTION"
"HORIZONTAL_REDUCTION"
"RECOVERY_SPEED"
"STABILITY_FACTOR"
)
for var in "${critical_vars[@]}"; do
if [ -n "${!var}" ]; then
echo -e "${GREEN}[✓] $var is set to: ${!var}${NC}"
else
echo -e "${RED}[×] $var is not set${NC}"
fi
done
# Verify critical functions
echo -e "\n${BLUE}[*] Verifying critical functions...${NC}"
critical_functions=(
"initialize_recoil_system"
"initialize_touch_system"
"initialize_graphics_system"
"initialize_performance_system"
"initialize_gyro_system"
"initialize_network_system"
)
for func in "${critical_functions[@]}"; do
if type "$func" >/dev/null 2>&1; then
echo -e "${GREEN}[✓] Function available: $func${NC}"
else
echo -e "${RED}[×] Missing critical function: $func${NC}"
fi
done
# Define initialization functions
initialize_touch_system() {
echo -e "${YELLOW}[*] Initializing touch system...${NC}"
# Configure touch parameters
am broadcast -a android.intent.action.TOUCH_SYSTEM \
--ei "sampling_rate" 1220 \
--ef "response_time" 0.000000001 \
--ez "prediction_enabled" true
echo -e "${GREEN}[✓] Touch system initialized${NC}"
}
initialize_graphics_system() {
echo -e "${YELLOW}[*] Initializing graphics system...${NC}"
# Configure graphics parameters
am broadcast -a android.intent.action.GRAPHICS_SYSTEM \
--ez "hdr_enabled" true \
--es "quality" "EXTREME" \
--ei "fps" 120
echo -e "${GREEN}[✓] Graphics system initialized${NC}"
}
initialize_input_system() {
echo -e "${YELLOW}[*] Initializing input system...${NC}"
# Configure input parameters
am broadcast -a android.intent.action.INPUT_SYSTEM \
--ez "enhanced_input" true \
--ei "input_boost" 1
echo -e "${GREEN}[✓] Input system initialized${NC}"
}
# Main initialization function
initialize_all_systems() {
clear
echo "╔════════════════════════════════════════════════════════╗"
echo "║ Advanced Gaming Suite v2.0 ║"
echo "║ Advanced Integration System ║"
echo "╚════════════════════════════════════════════════════════╝"
# Execute core optimization scripts
# Initialize all subsystems
initialize_subsystems
# Start monitoring and optimization
start_monitoring_system
# Begin game detection
start_game_detection
}
# Initialize all subsystems
initialize_subsystems() {
echo -e "${BLUE}[*] Initializing all subsystems...${NC}"
# Core systems
initialize_performance_system
initialize_memory_system
initialize_network_system
# Gaming systems
initialize_recoil_system
initialize_touch_system
initialize_graphics_system
initialize_input_system
# Execute additional initialization scripts
bash ~/init_functions.sh &
bash ~/memory_management.sh &
bash ~/resource_management.sh &
bash ~/gyroscope_optimization.sh &
bash ~/input_processing.sh &
bash ~/touch_response.sh &
bash ~/graphics_enhancement.sh &
bash ~/smooth_performance.sh &
bash ~/apply_recoil.sh &
bash ~/performance_monitor.sh &
bash ~/status_display.sh &
bash ~/game_detection.sh &
bash ~/performance_recovery.sh &
bash ~/session_management.sh &
bash ~/touch_response.sh &
bash ~/game_enhancement.sh &
bash ~/recoil_control.sh &
echo -e "${GREEN}[✓] All subsystems initialized successfully${NC}"
}
# Initialize performance system
initialize_performance_system() {
echo -e "${YELLOW}[*] Initializing performance system...${NC}"
# Set CPU parameters
for cpu in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do
echo "performance" > $cpu 2>/dev/null
done
# Set GPU parameters
echo "performance" > /sys/class/kgsl/kgsl-3d0/devfreq/governor 2>/dev/null
echo -e "${GREEN}[✓] Performance system initialized${NC}"
}
# Initialize thermal system
initialize_thermal_system() {
echo -e "${YELLOW}[*] Initializing thermal management...${NC}"
# Configure thermal parameters
echo 0 > /sys/class/thermal/thermal_zone0/enabled 2>/dev/null
echo -e "${GREEN}[✓] Thermal system initialized${NC}"
}
# Initialize memory system
initialize_memory_system() {
echo -e "${YELLOW}[*] Initializing memory management...${NC}"
# Configure memory parameters
echo 0 > /proc/sys/vm/swappiness 2>/dev/null
echo 3 > /proc/sys/vm/drop_caches 2>/dev/null
echo -e "${GREEN}[✓] Memory system initialized${NC}"
}
# Initialize network system
initialize_network_system() {
echo -e "${YELLOW}[*] Initializing network optimization...${NC}"
# Configure network parameters
settings put global wifi_scan_throttle_enabled 0
settings put global mobile_data_always_on 1
echo -e "${GREEN}[✓] Network system initialized${NC}"
}
# Start monitoring system
start_monitoring_system() {
echo -e "${BLUE}[*] Starting monitoring system...${NC}"
# Start monitoring scripts
bash ~/monitor_freq.sh &
bash ~/monitoring_system.sh &
bash ~/performance_monitor.sh &
bash ~/status_display.sh &
while true; do
monitor_system_metrics
check_game_process
sleep 0.0000000001
done &
}
# Monitor system metrics
monitor_system_metrics() {
# Get current metrics
cpu_usage=$(top -n 1 | grep "Cpu(s)" | awk '{print $2}')
mem_usage=$(free | grep Mem | awk '{print $3/$2 * 100.0}')
temp=$(cat /sys/class/thermal/thermal_zone0/temp 2>/dev/null)
# Display metrics
echo -e "${BLUE}System Metrics:${NC}"
echo -e "CPU Usage: ${YELLOW}${cpu_usage}%${NC}"
echo -e "Memory Usage: ${YELLOW}${mem_usage}%${NC}"
echo -e "Temperature: ${YELLOW}$((temp/1000))°C${NC}"
}
# Check game process
check_game_process() {
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
apply_game_optimizations
fi
}
# Apply game optimizations
apply_game_optimizations() {
# Apply all optimizations
am broadcast -a android.intent.action.GAME_OPTIMIZATION \
--ez "extreme_mode" true \
--ez "ultra_performance" true \
--ez "enhanced_control" true \
--ez "priority_mode" true
# Apply specific enhancements
apply_recoil_optimization
apply_touch_optimization
apply_graphics_optimization
# Start additional optimization scripts
bash ~/performance_recovery.sh &
bash ~/refresh_rate_optimizer.sh &
# Apply dynamic recoil compensation
apply_dynamic_compensation
}
# Apply recoil optimization
apply_recoil_optimization() {
am broadcast -a android.intent.action.RECOIL_OPTIMIZATION \
--ef "vertical_reduction" 99.5 \
--ef "horizontal_reduction" 9.5 \
--ef "recovery_speed" 0.1 \
--ez "enhanced_mode" true
}
# Apply touch optimization
apply_touch_optimization() {
am broadcast -a android.intent.action.TOUCH_OPTIMIZATION \
--ei "sampling_rate" 1220 \
--ef "response_time" 0.00000000000000000000000000001 \
--ez "prediction_enabled" true
}
# Apply graphics optimization
apply_graphics_optimization() {
am broadcast -a android.intent.action.GRAPHICS_OPTIMIZATION \
--ez "hdr_enabled" true \
--es "quality" "EXTREME" \
--ei "fps" 120
}
# Start game detection
start_game_detection() {
echo -e "${BLUE}[*] Starting game detection...${NC}"
# Start game detection scripts
bash ~/game_detection.sh &
bash ~/game_enhancement.sh &
while true; do
if ps -A | grep -E "com.pubg.imobile|com.tencent.ig|com.krafton.bgmi" >
/dev/null; then
echo -e "${GREEN}[✓] Game detected - Applying optimizations${NC}"
apply_game_optimizations
fi
sleep 0.0000000001
done &
}
# Main execution
initialize_all_systems
EOF
chmod +x ~/integration_system.sh
# Create startup script
cat > ~/start.sh << 'EOF'
#!/bin/bash
# File to store PIDs
PID_FILE="/tmp/gaming_suite_pids.txt"
# Function to clean up background processes
cleanup() {
echo "Stopping all systems..."
# Kill all child processes and their descendants
pkill -P $$ -9 2>/dev/null
# Kill all related scripts forcefully
pkill -f "integration_system.sh" -9 2>/dev/null
pkill -f "performance_monitor.sh" -9 2>/dev/null
pkill -f "game_detection.sh" -9 2>/dev/null
pkill -f "monitoring_system.sh" -9 2>/dev/null
pkill -f "network_optimization.sh" -9 2>/dev/null
pkill -f "thermal_management.sh" -9 2>/dev/null
# Kill processes from PID file
if [ -f "$PID_FILE" ]; then
while read pid; do
pkill -P "$pid" -9 2>/dev/null
kill -9 "$pid" 2>/dev/null
done < "$PID_FILE"
rm -f "$PID_FILE"
fi
# Final cleanup of any remaining related processes
for script in $(ps aux | grep -E "\.sh" | grep -v "grep" | awk '{print $2}');
do
kill -9 "$script" 2>/dev/null
done
exit 0
}
# Set up trap for multiple signals
trap 'cleanup' SIGINT SIGTERM SIGHUP
clear
echo "╔════════════════════════════════════════════════════════╗"
echo "║ iPhone 15 Pro Max Gaming Suite v2.0 ║"
echo "║ Starting All Systems ║"
echo "╚════════════════════════════════════════════════════════╝"
# Start all systems and save PIDs
bash ~/integration_system.sh &
echo $! > "$PID_FILE"
echo "All systems started successfully!"
echo "Monitoring and optimization active..."
echo ""
echo "Press Ctrl+C to stop"
# Keep script running
while true; do
sleep 1
done
EOF
chmod +x ~/start.sh
# Create color codes configuration
cat > ~/color_codes.conf << 'EOF'
# Color codes for status display
BLUE='\033[0;34m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
RED='\033[0;31m'
NC='\033[0m'
EOF
echo "╔════════════════════════════════════════════════════════╗"
echo "║ iPhone 15 Pro Max Gaming Optimization Suite ║"
echo "╚════════════════════════════════════════════════════════╝"
echo ""
echo "Setup complete! To start the optimization suite, run:"
echo "bash ~/start.sh"
echo ""
echo "Additional commands:"
echo " • dashboard.sh - View real-time performance dashboard"
echo " • backup.sh - Backup current settings"
echo " • restore.sh - Restore previous settings"
echo " • log_management.sh - View and manage system logs"
You might also like
- Autoexec - CFG File For Counter-Strike: SourceNo ratings yetAutoexec - CFG File For Counter-Strike: Source3 pages
- The SSD Optimization Guide for Windows 7 & Windows 8.1 Edition 2018From EverandThe SSD Optimization Guide for Windows 7 & Windows 8.1 Edition 2018No ratings yet
- UNIT-1 The Architecture Business Cycle: Rajasekhar, SEATNo ratings yetUNIT-1 The Architecture Business Cycle: Rajasekhar, SEAT21 pages
- DMF Parallel Processing Issue and ResolutionNo ratings yetDMF Parallel Processing Issue and Resolution5 pages
- Performance Improvement Using CPU Scheduling Algorithm-SRTNo ratings yetPerformance Improvement Using CPU Scheduling Algorithm-SRT4 pages
- Linux (Fedora or Slackware) CPU SchedulingNo ratings yetLinux (Fedora or Slackware) CPU Scheduling19 pages
- SPD - Huawei ERAN6.0 Power Control Feature IntroductionNo ratings yetSPD - Huawei ERAN6.0 Power Control Feature Introduction25 pages
- Wireless Sensor Networks: Concepts and ComponentsNo ratings yetWireless Sensor Networks: Concepts and Components22 pages
- Bca502: Core - 19: Operating Systems Multiple Choice QuestionsNo ratings yetBca502: Core - 19: Operating Systems Multiple Choice Questions29 pages
- CSSE 340 Operating Systems Project 2: CPU Scheduling SimulatorNo ratings yetCSSE 340 Operating Systems Project 2: CPU Scheduling Simulator5 pages
- Scheduling Programming Activities and Johnson's Algorithm: Allan Glaser and Meenal Sinha Octagon Research Solutions, IncNo ratings yetScheduling Programming Activities and Johnson's Algorithm: Allan Glaser and Meenal Sinha Octagon Research Solutions, Inc7 pages
- Difference Between Scheduling AlgorithmsNo ratings yetDifference Between Scheduling Algorithms2 pages
- Operating System Short Questions and Answers40% (5)Operating System Short Questions and Answers62 pages
