Scribd
Upload
20 views2 pages

PN 542 TDS

The document details the specifications and features of the SHELBLAST safety helmet, certified to EN 397:2012+A1:2012. It highlights the helmet's shock absorption capacity, adjustable harness, and unique design features for comfort and protection against environmental factors. Additionally, it outlines various compliance tests the helmet has passed, including shock absorption, penetration resistance, and flammability resistance.

Uploaded by

rishigoyal1306
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views2 pages

PN 542 TDS

The document details the specifications and features of the SHELBLAST safety helmet, certified to EN 397:2012+A1:2012. It highlights the helmet's shock absorption capacity, adjustable harness, and unique design features for comfort and protection against environmental factors. Additionally, it outlines various compliance tests the helmet has passed, including shock absorption, penetration resistance, and flammability resistance.

Uploaded by

rishigoyal1306
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DOC. NO.

REVISION ISSUE DATE


QF/RD/05 01 01 07-08-23

SHELBLAST
PN 542YTC

Available in colors:

CERTIFIED TO EN 397:2012+A1:2012

• The function of a safety helmet is not only to provide protection to the


user’s head from a falling object but its capacity to reduce the impact,
SHOCK which is defined as Shock Absorption Capacity.
ABSORPTION • The eight-point attachment cradle within the shell has a unique angular
placement to provide optimum shock absorption.

Ratchet- Type adjustment for Comfort and Better Grip:


GENERAL ADJUSTMENT Ratchet of the Shelblast has a very innovative design consisting of ratchet
TYPE cover, ratchet base and knob for easy and smooth adjustment of the
headband.
HARNESS The helmet inner harness is available in options of webbing and polymer
PREFERENCE as per the customer’s need.

WEIGHT 435 gms ± 10 gms.

• Equipped with protective peak for better impact resistance.


PHYSICAL • Equipped with ventilated slots with shutter to prevent any rain water
1
PARAMETERS seepage.
DESIGN • Unique Rain Management system which effectively manages the rain
HELMET FEATURE to reduce the flow of water down the neck.
SHELL • Is provided with side slots for fitting face and hearing protection
accessories.
• Webbing cradle option is also available.

MATERIAL Polypropylene Co-polymer

• Equipped with unique eight Point attachment cradle for optimum shock
DESIGN absorption.
FEATURE • Extra thick walls of the Shell prevent any damages and slip caused
HELMET upon an Impact.
CRADLE
LDPE (Low density Polyethylene) and
MATERIAL
LLDPE (Linear Low Density Polyethylene)
• Dermatologically tested.
• Headband comfort pad is non-skin irritant (pH
neutral), highly sweat absorbent providing
maximum user comfort.
DESIGN FEATURE
COMFORT PAD • Forehead comfort pad provides extra softness and
comfort to the user.
• Does not stain the skin through any release of
color.
MATERIAL Polyurethane
• Adjustable and replaceable chin strap.
DESIGN FEATURE • Comes with Y-Type Chinstrap for additional
CHIN STRAP comfort and better grip.
MATERIAL Polyester
The helmet is maintained at a temperature of 50˚C±
HIGH TEMPERATURE
2˚C for between 4 hours and 24 hours.
CLIMATE The helmet is maintained at a temperature of -10˚C±
CONDITION LOW TEMPERATURE
2˚C for between 4 hours and 24 hours.
TEST
The helmet shall be totally immersed in water at 20˚C
WATER IMMERSION
± 2˚C for between 4 hours and 24 hours.

SHOCK Sustained a drop of 5 kg mass over the helmet from a


AS PER
ABSORPTION height of 1.0 mtr and maximum force observed below
EN 397:2012+A1:2012
TEST 5kN.

Sustained Penetration Test drop of penetrator of 3.0


VITAL TEST PENETRATION Kg mass from the height of 1.0mtr on the safety
2 AS PER
COMPLIANCE RESISTANCE helmet. No damage observed in the shell and harness
EN 397:2012+A1:2012
TEST neither any contact observed between penetrator and
headform.
Sustained the Flammability Resistance Test when
subjected to application of flame for the period of 10
FLAME seconds.
AS PER
RESISTANCE EN 397:2012+A1:2012 The material of the shell was not burn with emission of
TEST
flame after a period of 5 seconds following removal of
flame.

CHIN STRAP Sustained Chin Strap Test when subjected to tensile


AS PER
ANCHORAGE load of onto the chin strap artificial jaws. Artificial jaws
EN 397:2012+A1:2012
TEST were released between 150-250 N..

You might also like