Validate Print Help Percentage BoQ

Tender Inviting Authority: EXECUTIVE ENGINEER MEDICAL AND HEALTH, CHITTORGARH

Name of Work :- 6. Electrical work of New PHC Building Dudhitalai, Distt. Chittorgarh
Contract No: NIT No.06/2024-25 CHITTORGARH (INTEGRATED ALL RAJASTHAN PWD BUILDING AND ELECTRICAL BSR 2022)
Name of the
Bidder/
Bidding Firm /
Company :

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender.
Bidders are allowed to enter the Bidder Name and Values only )

NUMBER # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #

Sl. Item Description TOTAL AMOUNT TOTAL AMOUNT
No. Without Taxes in In Words
Rs. P

Estimated Rate
in
Quantity Units Rs. P
1 2 4 5 6 53 55
1 PARTICULARS
2

Wiring of light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq. mm nominal size FR PVC insulated
unsheathed flexible copper conductor 1.1 kV grade and
1.5 sq. mm nominal size FR PVC insulated unsheathed
flexible copper earth conductor 1.1 kV grade (IS:694) in
recessed ISI marked MMS ( IS:9537 P - III ) virgin
material PVC conduit & it's ISI marked (IS:3419-1988)
accessories, round tiles, 1.2 mm thick Hot Dipped
Galvanized Modular Box with earth terminal, 10A Modular
switch,Modular face plate with grid plate, 3 pin ceiling rose
/ Holder /3 way connector, screws, making connections,
testing etc. as required. For specification of copper
Conductor, Phenolic Laminated sheet's & Electrical/
Wiring accessories refer Chapter E - 04, E - 05 & E - 07
For additional technical parameters of product / work refer
Annexure 'A' attached with this BSR
3
Short point (up to 3 mtr.) 35.00 Nos. 359.00 12565.00 #VALUE!
4 Medium point (up to 6 mtr.) 100.00 Nos. 578.00 57800.00 #VALUE!
5
Long point (up to 10 mtr.) 55.00 Nos. 772.00 42460.00 #VALUE!
6

Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm
nominal size FR PVC insulated unsheathed flexible
copper conductor 1.1 kV grade and 1.5 sq. mm nominal
size FR PVC insulated unsheathed flexible copper earth
conductor 1.1 kV grade(IS:694) in recessed ISI marked
MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked
(IS:3419-1988)accessories, Hot Dipped Galvanized
Modular box of 1.2 mm thick with earth terminal, 10 A
modular switch, 3/5 pin 6 A modular socket, Modular face
plate with grid plate, screws, making connections, testing
etc. as required. For specification of copper Conductor,
Phenolic Laminated sheet's & Electrical/ Wiring
accessories refer Chapter E - 04, E - 05 & E - 07 For
additional technical parameters of product / work refer
Annexure 'A' attached with this BSR
7
On board 60.00 Nos. 357.00 21420.00 #VALUE!
8 Short point (up to 3 mtr.) 2.00 Nos. 507.00 1014.00 #VALUE!
9
Medium point (up to 6 mtr.) 2.00 Nos. 726.00 1452.00 #VALUE!
10 Long point (up to 10 mtr..) 2.00 Nos. 920.00 1840.00 #VALUE!
11
Supplying and fixing of power plug point with Modular
accessories as per PWD specification for electrical
Works, on hot dipped galvanized modular box of 1.2 mm
thick with earthing terminal/connector on surface or in
recessed with suitable size of modular face place with grid
plate and cover plate including cost of ISI marked
modular 16 amp. Switch (IS :3854) and 6/16 amp. socket
outlet (IS:1293) making connection , testing , etc. as
required. For specification of Wiring accessories refer
Chapter E - 07 related item & For additional technical
parameters of product / work refer Annexure 'A' attached
with this BSR 55.00 Nos. 580.00 31900.00 #VALUE!
12

Providing & Fixing of following modular accessories as per

PWD specification for electrical Works, made out of
unbreakable and fire retardant vergin poly carbonate with
brass terminals and captive screws & silver alloy contact
tip with IP-20 rating , including all as per pre approved by
Engineer in charge,making connections, testing etc. as
required. For additional technical parameters of product /
work refer Annexure 'A' attached with this BSR
13
RJ-11 telephone jack single line 11.00 EACH 142.00 1562.00 #VALUE!
14 Blanking plate 30.00 EACH 22.00 660.00 #VALUE!
15
Modular MCB 6 A to 32 A DP 9.00 EACH 461.00 4149.00 #VALUE!
16

Providing & Fixing of modular type 120 W Step Fan

regulator duly ISI marked (IS 11037:1984 ) with CM/L no.
printed made out of unbreakable and fire retardant vergin
poly carbonate with brass terminals and captive screws &
silver alloy contact tip with IP-20 rating , including all as
per pre approved by Engineer in charge,making
connections, testing etc. as required. For additional
technical parameters of product / work refer Annexure 'A'
attached with this BSR
17 5 step fan regulator 2 Module 360 dgree rotating 30.00 Nos 398.00 11940.00 #VALUE!
18

Providing & Fixing of modular type lockable feature socket

duly made out of unbreakable and fire retardant vergin
poly carbonate with brass terminals and captive screws &
silver alloy contact tip with IP-20 rating , including all as
per pre approved by Engineer in charge,making
connections, testing etc. as required. For additional
technical parameters of product / work refer Annexure 'A'
attached with this BSR
19
6/16 A shuttered socket 9.00 Nos 176.00 1584.00 #VALUE!
20

Providing & Fixing of following size mounting grid plates

with cover plates made from fire retardent UV established
high performance engineering plastic suitable for all
universal metal boxes for front installation & removal
direct fit type complete in all respect.All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
21 1/2 Module 30.00 Nos 65.00 1950.00 #VALUE!
22

Supplying and drawing FR PVC insulated & unsheathed

flexible copper conductor as per PWD specification for
electrical Works with ISI marked (IS:694) and as per IS
8130 : 2013 of 1.1 kV grade . Wire should be made from
99.90 % purity copper, class 5 stranding in acc. to
IS:8130/IEC 60228 for lower watt loss , oxygen free for
less chances of oxidization, insulation PVC type A/C/D ,
flame retardant as per IS 10810-53, better amperage
rating as per IS:3961 part 5, in existing surface or
recessed PVC/ MS conduit/casing capping making
connections with Copper Lugs of suitable size,
Ferrules,testing etc. as required. OEM Must have its own
in house NABL lab setup for all testing facilities for wires.
For additional technical parameters of product / work refer
Annexure 'A' attached with this BSR
23 1 x 1.5 sq.mm 350.00 Mtr. 22.00 7700.00 #VALUE!
24
2 x 2.5 sq. mm. + 1x1.5sqmm 450.00 Mtr. 81.00 36450.00 #VALUE!
25 1 x 4.0 sq.mm 40.00 Mtr. 48.00 1920.00 #VALUE!
26 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 550.00 Mtr. 122.00 67100.00 #VALUE!
27 4 x 6.0 sq.mm 20.00 Mtr. 276.00 5520.00 #VALUE!
28 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 75.00 Mtr. 170.00 12750.00 #VALUE!
29 4 x 10.0 sq.mm 20.00 Mtr. 531.00 10620.00 #VALUE!
30

Providing & Fixing of Recessed/surface mounting heavy

duty horizontal type Double Door ( Metal /
Glazed )Distribution board with Metal end box made out
from Galvanized steel / CRCA sheet not less then 1.2 mm
thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3,
powder painted complete with reversible door (for double
door DB only )100 amp. insulated copper bus
bar/shorting link , copper neutral link, copper earth link ,
color coded interconnecting wire set of suitable rating and
din bar,masking sheet, making internal DB terminations
with copper lugs, Ferrules, detachable gland plate,
including making connections, testing etc. as required.
OEM shall have submit NABL / CPRI / ERDA accrediated
lab type test reports & All as per pre approved by
Engineer in charge. For additional technical parameters of
product / work refer Annexure 'A' attached with this BSR
31 Metal door (Three phase) IK-09 and IP-43 with Metal end
box
32 6 Way 1.00 Nos 4811.00 4811.00 #VALUE!
33 8 Way 1.00 Nos 5980.00 5980.00 #VALUE!
34 Metal door (singlephase) IK-09 and IP-43 with Metal end
box
35 12 Way 1.00 nos 2590.00 2590.00 #VALUE!
36

Providing & Fixing of 240/415 V AC MCB with positive

isolation of 10 kA breaking capacity (B/ C/D tripping
characteristic as per type of load and site requirement) 4
KV impulse withstand voltage, ISI marked IS 8828(1996) /
conforming to IEC 60898-1 2002, IEC 60947-2, low watt
losses, trip free mechanisum , energy limiting of class 3
as per IEC, minimum phase termination capacity of
35sq.mm. , conductor line load reversibility , IP 20 contact
protection and fitted in existing distribution board/sheets,
minimum electrical operation 20,000 upto 20 A rating and
10,000 upto 63 A, 5000 for 80 A & above rating including
making connections, testing etc. as required. OEM shall
have submit NABL / CPRI / ERDA accrediated lab type
test reports & All as per pre approved by Engineer in
charge. For additional technical parameters of product /
work refer Annexure 'A' attached with this BSR
37 Single pole MCB (With B/C curve tripping
Characteristics)
38
6 A to 32 A rating 52.00 Nos. 187.00 9724.00 #VALUE!
39
Four pole MCB (With B/C curve tripping Characteristics)
40 50/63 A rating 2.00 Nos. 1745.00 3490.00 #VALUE!
41
Triple pole MCB(With B/C curve tripping Characteristics)
42 6 A to 32 A rating 4.00 Nos. 910.00 3640.00 #VALUE!
43
Double pole MCB(With B/C curve tripping Characteristics)
44 6 A to 32 A rating 1.00 Nos. 566.00 566.00 #VALUE!
45

S&F following sizes (dia.) of ISI marked virgin material

MMS ( IS:9537 P - III ) PVC conduit along with ISI
marked (IS:3419-1988) accessories as required in
recess including cutting the wall, covering conduit and
making good the same as required. For additional
technical parameters of product / work refer Annexure 'A'
attached with this BSR
46 20 mm 400.00 R. mtr. 40.00 16000.00 #VALUE!
47 25 mm 700.00 R. mtr. 56.00 39200.00 #VALUE!
48 32 mm 40.00 R. mtr. 84.00 3360.00 #VALUE!
49
Making of hole in wall (brick/stone) of required and placing
NP-2 RCC pipe ring of required size for housing exhaust
fan and making good the same, with cement plaster
required of following size. All as per pre approved by
Engineer in charge. For additional technical parameters
of products/ work , refer Annexure "A" attached with this
BSR .
50
Up to 457 mm size 12.00 Nos 348.00 4176.00 #VALUE!
51

P & F 1.2mm thick M.S. Recessed fan box, hexagonal/

round of size 130 mm dia, depth 75mm, 12 mm dia rod
fan hook with 100 mm length extended on each side . All
as per pre approved by Engineer in charge. For additional
technical parameters of product / work refer Annexure 'A'
attached with this BSR 30.00 Nos 128.00 3840.00 #VALUE!
52

Providing & Fixing of Heavy duty capacitor start, copper

wound Double ball bearing 900/1400 RPM single phase
Exhaust fan conforming to IS:2312 ISI marked in existing
opening including making connections testing etc. as
required. All as per pre approved by Engineer in charge.
For additional technical parameters of products/ work ,
refer Annexure "A" attached with this BSR .
53
300 mm sweep(900/1400 RPM) 3.00 Nos 3175.00 9525.00 #VALUE!
54

Providing & Fixing of IP20 SMD Mid Power LED batten

type integrated light fixture made from Powder coated
Extruded aluminium housing with in built driver , System
lumen efficacy ≥ 110 lm/Watt output, internal surge
protection of 2.5 KV with Short & Open circuit
protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of
minimum 50000 Burning Hours with , 70% of intial Lumen
maintaned till life ends , CCT 3000°K / 4000°K /
5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum
power consumption should not more than the specified
rating and Fixture shall be of BIS standard and trade
mark certificate ( T.C.). Manufactures Word Mark/ Name
Engraved/ Embossing/ Screen printing on housing. OEM
must have its own in house NABL lab setup for all testing
facilities for LED fixtures. (LM79 & LM80) certificate /
Report from OEM shall be submitted. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
55 1170mm(+/-10%) LED batten with min. lumen output 2200
lm 50.00 Nos 492.00 24600.00 #VALUE!
56

Providing & Fixing of BEE Star rated copper wounded

double ball bearing capacitor start, aluminium body &
Metallic blade ceiling fan Conforming to all the
performance requirements laid down in IS 374:2019
including all amendments, as applicable ; & Carry BIS
licensing (i.e. ISI marking) with down rod up to 80 cm with
secondary support safety cable ( steel rope) , cotter pin
with 3 x 1.5 sq.mm pvc insulated flexible copper conductor
making connection testing etc. as required. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
57 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to
< 4.5 ) 30.00 Nos 1890.00 56700.00 #VALUE!
58

Providing & Fixing of 450 mm Sweep Oscillating type

Wall mounting / Pedestal type fans with Three speed, ON
and OFF position, Sintered Iron bush oil impregnated,
with metal front and back 120 or more ribs guard; Three
no. Aluminium blades, minimum Air delivery 100 Cum. /
Minute , Minimum Service Value 1.11 Cum./min/watt,
noise level should be <= 75 dB, power consumption <=
120 watts, motor protection through thermal overload
protection device, including fixing with anchor bolts,
making connection testing etc. as required. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
59
Wall mounting type with Adjustable Vertical Angle 1.00 Nos 4969.00 4969.00 #VALUE!
60
Providing & Fixing of of Double ball bearing, copper
wounded capacitor start single phase metallic blade
fresh air fan, in existing opening including cost of
hardware , flexible 3 core copper conductor ,making
connections, testing etc. as required. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
61
225 mm sweep 4.00 Nos 1687.00 6748.00 #VALUE!
62
300 mm sweep 8.00 Nos 1822.00 14576.00 #VALUE!
63

Providing & Laying P.V.C. / XLPE insulated & P.V.C.

sheathed Arrmoured Aluminium cable confirming to
IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade
electrolytic aluminium conductor confirming to IS 8130 of
purity >99.6 %, round / flat strip armouring of cables, Inner
/ outer sheath confirming to IS:5831 in existing RCC /
Hume / Stoneware / PVC pipe/ open duct/cable trench /
Cable tray(with cable tie) including testing etc. as
required of following size. OEM must have it's own in
house NABL accrediated Laboratory for testing procedure
as per IS:10810.For additional technical parameters of
product / work refer Annexure 'A' attached with this BSR
64 25.0 Sq. mm
65 3.5 core 50.00 Mtr 285.00 14250.00 #VALUE!
66 10 sq mm 2 core
67 2.0 core 40.00 Mtr 152.00 6080.00 #VALUE!
68
Supply and installation of high tensile low carbon steel
rod molecularly bonded with 99.9 % Copper thickness
(250 microns) and confirming to UL 467, IS/IEC 62561-2
of following size and length and as per point mentioned
(a), (b), [c), (d), (e) below :-
69 (a) Bore a hole of dia. 100 mm of required length, Place
the rod in the centre of Hole
70

(b) filled with anti corrosive conductive compounds with

the permanent sealings at both the ends, CPRI/ ERDA
tested with RMS capacity of minimum 30 KA for
withstanding 1 second .To ensure the moisture content
and electrical conductivity, 25 kg for 2000 mm & 50 Kgs
for 3000mm of resistance lowering earth enhancement
material shall be used as a backfill compound. The
compound shall be tested form NABL acredeated lab for
low resistivity ( less than 0.12 Ohm - meter ) & high
conductivity in nature with carbon as a major content as
per referance of IS 3043-1987,IEEE 80-2013 (clause
14.5d) , IEEE 837 & IER 1956 with latest amendemnts
71
© Connect the rod with copper Strip/Conductor/Wire with
suitable clamp made from tinned copper and SS 304 Bolt
72
(d) Place Heavy duty weather proof poly-propylene earth
pit chamber with lockable Jam free lid suitable for safe
working load 5000 Kg or more of size Top Dia. 225 to 260
mm, Bottom Dia 300 to 350 mm. and Height 250 to 300
mm.
73
(d) Testing of earth resistance for value of 5 ohms or less
as required & must record by engineer in charge during
site visit and ensure to enter in measurment book.
74
(e) Test certificates for confirming above standards from
OEM is mandatory. All as per pre approved by Engineer in
charge. For additional technical parameters of products/
work , refer Annexure "A" attached with this BSR .
75 17.2 mm thick and 3 Mtr. Long 2.00 Nos 7010.00 14020.00 #VALUE!
76

Supply & Laying following size earth strip in horizontal or

vertical run in surface by means of Earth strip DMC
Insulator including riveting/ soldering/ welding, Jointing
shall be done by overlapping and with 2 set of Brass (for
Cu strip) / GI (for GI Strip) nut bolt & spring washer
spaced at 50cm making connection etc. as required.All as
per pre approved by Engineer in charge. For additional
technical parameters of products/ work , refer Annexure
"A" attached with this BSR .
77 20mm x 3mm copper strip 10.00 Nos 781.00 7810.00 #VALUE!
78
Supply & Laying following size earth wire in horizontal or
vertical run in ground/surface/recess including riveting,
soldering, saddles, making connection with GI/Cu purity
purity >95% thimble etc. as required. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
79 8 SWG tinned copper Wire 20.00 Mtr 163.00 3260.00 #VALUE!
80

Providing & Fixing of IK08, IP 66 protected LED Street

Light Luminaire on existing bracket/pole. Fixture made of
powder coated single piece pressure die cast aluminum
material with heat dissipation fins on housing with UV
stabilized PC (UV stablization report submitted for UV
cover ) /Toughened Glass cover and secondary lens on
each LED & should be SMD type of 3 to 5 watt each . The
System efficacy >=125 lm/ wt and potted driver & has a
unique BIS R number with Input Voltage AC 120 to 270 V
AC with High voltage Cutoff @>=300 V AC and Auto
resetting Safety , Power Factor >0.95 driver Efficiency
>85% ,THD(I) <10% Humidity 10% to 90% RH Working
Temp -5C to 45C . driver current <750mA. The luminaire
shall be BIS certified and Trade mark certified. Life
Expectancy Equal or more than 50000 burning hrs with
Minimum 70% lumen maintened , CRI >70 and CCT
5700K +355K. Surge protection shall be min ≥ 4 KV
internal and min 10 KV external inside driver
compartment. driver should be Phase to phase protection
of 440 V for 4 Hrs. Manufactures Word Mark/Name
Engraved/Embossing on die cast housing to allow
traceability/authenticity. Fixture shall be AS PER IS 10322
Complianced.OEM Must have its own in house NABL lab
setup for all testing facilities for LED fixtures.
(LM79/LM80) Certificate/ report with liable warranty of
product/accessories from OEM shall be submitted. All as
per pre approved by Engineer in charge. For additional
technical parameters of products/ work , refer Annexure
"A" attached with this BSR .
81 LED Street Light fixture with Minimum lumen output 3700
lm 6.00 Each 3370.00 20220.00 #VALUE!
82
P & F of Gravity Louver shutter of superior quality made
out of frame of 18 swg M.S. sheet & Louvers made from
24 swg MS Sheet with enamel paint including cost of
nuts, bolts, etc as reqd. All as per pre approved by
Engineer in charge. For additional technical parameters
of products/ work , refer Annexure "A" attached with this
BSR .
83
Up to 380 mm size 12.00 Nos 287.00 3444.00 #VALUE!
84

Supply & Laying following size' B ' class , G.I. Pipe

confirming to IS : 1239 P - 1 ( 2004 ) with accessories like
bend, socket etc. for laying earth conductor/ strip / cable
in ground/ surface/ recess as required. All as per pre
approved by Engineer in charge. (Earth Excavation will
be Paid Extra)All as per pre approved by Engineer in
charge. For additional technical parameters of products/
work , refer Annex ure "A" attached with this BSR .
85 32mm dia 9.00 Mtr 448.00 4032.00 #VALUE!
86

SITC of 3 /4 pole current limiting Moulded case circuit

breaker (MCCB) made of flame retardent & heat resistant
material having following current rating, short circuit
breaking capacity at 440/415 V, 50 Hz; O/L & S/C
settings , conforming to IS/IEC 60947 P -2 :2003 with front
face and centralised adjustable, trip free mechanisum,
true contact position indicator, line load
interchangeability, designed for both horizontal & vertical
mounting without any adverse effect on electrical
performance, suitable for operation upto 55 degree and
without derating upto 40 degree, pollution degree 3,
having positive isolation capability, push (test) to trip, trip
time less then 10 ms under s/c condition, Breaking
capacity Ics = 100% Icu. U imp =8 KV, rated insulation
voltage 690 V. provision for UVR , shunt trip , earth fault
trip, door interlock, pad lock & rotary handle , including
making connections etc. as required.OEM shall have
submit NABL / CPRI / ERDA accrediated lab type test
certificate before execution All as per pre approved by
Engineer in charge. For additional technical parameters of
product / work refer Annexure 'A' attached with this BSR
87 4 pole MCCB With Thermal Magnetic release
88 up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C
setting, 1.00 Nos 7112.00 7112.00 #VALUE!
89

Providing & Fixing of IK08, IP 66 protected LED Street

Light Luminaire on existing bracket/pole. Fixture made of
powder coated single piece pressure die cast aluminum
material with heat dissipation fins on housing with UV
stabilized PC (UV stablization report submitted for UV
cover ) /Toughened Glass cover and secondary lens on
each LED & should be SMD type of 3 to 5 watt each . The
System efficacy >=125 lm/ wt and potted driver & has a
unique BIS R number with Input Voltage AC 120 to 270 V
AC with High voltage Cutoff @>=300 V AC and Auto
resetting Safety , Power Factor >0.95 driver Efficiency
>85% ,THD(I) <10% Humidity 10% to 90% RH Working
Temp -5C to 45C . driver current <750mA. The luminaire
shall be BIS certified and Trade mark certified. Life
Expectancy Equal or more than 50000 burning hrs with
Minimum 70% lumen maintened , CRI >70 and CCT
5700K +355K. Surge protection shall be min ≥ 4 KV
internal and min 10 KV external inside driver
compartment. driver should be Phase to phase protection
of 440 V for 4 Hrs. Manufactures Word Mark/Name
Engraved/Embossing on die cast housing to allow
traceability/authenticity. Fixture shall be AS PER IS 10322
Complianced.OEM Must have its own in house NABL lab
setup for all testing facilities for LED fixtures.
(LM79/LM80) Certificate/ report with liable warranty of
product/accessories from OEM shall be submitted. All as
per pre approved by Engineer in charge. For additional
technical parameters of products/ work , refer Annexure
"A" attached with this BSR .
90 LED Street Light fixture with Minimum lumen output 8700
lm 2.00 Nos 5847.00 11694.00 #VALUE!
91

Providing & Fixing of ding dong/musical chime bell as

per PWD specification for electrical Works, including
making connection testing etc. as required.All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR . 4.00 Nos 328.00 1312.00 #VALUE!
92

Supply & Fixing of Dry Powder Agent (as per IS

4308:2019), ABC type Fire Extinguisher (Stored Pressure
type) conforming to IS:15683:2018 , Powder coated
Internal & External Surface Deep drawn cylinder body of
Mild Steel CR2 grade conforming to IS: 513, Squeeze grip
Forged brass release valve with Inbuilt safety release
device, Diaphragm Type, 0 to 28 bar range pressure
gauge, 450 mm long EPDM discharge tube, QR code for
Product Traceability including Fixing on wall with suitable
Anchor Fasteners as required of following capacity. Test
Certificates of all the Parameters along with Hydro test &
Burst test (For Cylinder Body) Certificate from OEM /
External NABL Accrediated Lab is to be submitted. All as
per pre approved by Engineer in charge. For additional
technical parameters of products/ work , refer Annexure
"A" attached with this BSR .
93
6 kg 2.00 Nos 4576.00 9152.00 #VALUE!
94
Providing & Fixing of Electrical insulating rubber matts as
per PWD specification for electrical Works, ISI marked
confirming to IS: 15652 / 2006 with one side anti skid
abberation marks and pasting the mat with synthetic
rubber adhesive as required. All as per pre approved by
Engineer in charge. For additional technical parameters of
products/ work , refer Annexure "A" attached with this
BSR .
95

SITC of Radial / mixed flow ISI marked water and anti-

corrosive liquid filled submersible motor pump sets
suitable for 100/150mm dia borewell. The size of adopter
fixed on top of the motor should exceed the top of
coupler , for safegaurd the coupler. The construction
material of motor and pump should match IS: 8034 : 2018
and IS: 9283 guideline. The radial flow pumpset should
operate at 5 star energy efficiency level of BEE and mixed
flow pump set should operate at 3 star energy level of
BEE, accompained by valid BEE certificate. Motor should
be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30:
2008, & IS12615:2011 with required accessories
including making connection suitable for Bore well. The
job includes labour part of lowering of riser pipe G.I./
H.D.P.E. with rope, cables & pump, installation of
complete fitting and accessories, jointing of electrical
cables up to Starter. All labour for testing of submersible
pumps set and supply of water to water mains, complete
in all respect. OEM shall have submit NABL / CPRI /
ERDA accrediated lab type test certificate before
execution. All as per pre approved by Engineer in charge.
For additional technical parameters of products/ work ,
refer Annexure "A" attached with this BSR .
96 100 mm diameter Submersible pump shall have following
HP Rating, phase, Head range, Discharge range
respectively.
97
2.0 HP, 1-Ø, (7- 95)Mtr, (55-22) LPM 1.00 each 25202.00 25202.00 #VALUE!
98
Providing & Fixing of HDPE pipe Confirming to
IS:4984:2021 for water supply suitable for submersible &
jet pump with required fittings ie socket, elbows, tee etc.
complete in all respect. All as per pre approved by
Engineer in charge. For additional technical parameters
of products/ work , refer Annexure "A" attached with this
BSR .
99 40 mm OD 6 kg / cm2 100.00 mtr 94.00 9400.00 #VALUE!
100

SITC of Contactor OEM Fabricated DOL/Star-Delta

Starter panel with switchgear selection as per Type-2
Cordinatiom Chart and made out from 1.6 mm thick
powder coated CRCA sheet, enclosure comprising of over
load protection relay, short circuit & single phasing
protection, Illuminated ON / OFF push buttons, ammeter,
voltmeter, indicating lamps etc. suitable for following
rating motors complete in all respect. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
101 2.0 HP to 3.0 HP (DOL starter) 1.00 Nos 5406.00 5406.00 #VALUE!
102
Providing & Fixing of extra down rod of 15 mm dia . ERW
(Electrical resistance welded ) of 1.6mm nominal thick
medium duty steel pipe including cutting, threading,
drilling, fixing quarter pin etc as reqd. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR . 15.00 Mtr 212.00 3180.00 #VALUE!
103

Providing & Fixing of Vertical(BEE 5 star rated) /

Horizontal( BEE 3 star rated) storage water heater with
outer casing made of Engineering Plastic sheet (Upto 25
Ltr) / Metal rust proof Body (35 & 50 Ltr), Glass - line /
Titanium Enamel coated Pressure Pump Compatible 8 bar
pressure Inner tank, Glass Line Coated , mineral filled
heating element, stem type, snap action adjustable
thermostat , Dual indicating lamps Injected PUF
insulation, Multi Function Valve etc. as required held in
position with 2/4 no. 10/12 mm anchor Fastener, duly
wired with 3 core 2.5/4.0 Sqmm PVC insulated &
sheathed copper conductor and 16 A/25A three pin plug
top with Portable Residual Current Device ( PRCD ) ,
including making inlet, outlet Flexible alloy connection,
testing etc. as required. All as per pre approved by
Engineer in charge. For additional technical parameters
of products/ work , refer Annexure "A" attached with this
BSR .
104 15 Ltr. 3.00 Nos 10304.00 30912.00 #VALUE!
105

Providing & Fixing of IP20, 2'x2' LED Surface/ Recessed

mounting Mid power SMD type LED Light fixture not less
than 50mm housing depth made from CRCA sheet steel
housing, high purity / transmisivity UV stabilized Non -
yellowish diffuser for uniform light distribution. High
efficiency with 4 KV internal/external surge protection BIS
certified isolated driver having efficiency > 85% , with
Short & Open circuit protection (Integral with light fixture).
System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % ,
p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning
Hours with , 70% of intial Lumen maintaned till life ends ,
CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per
ANSI Bin) , maximum power consumption should not
more than the specified rating and Fixture shall be of BIS
standard and trade mark certificate ( T.C.). Manufactures
Word Mark/ Name Engraved/ Embossing/ Screen printing
on housing.
106 Surface Moutning
107
Minimum lumen output 3000 lm 5.00 Nos 2491.00 12455.00 #VALUE!
108
Supplying and drawing PE Insulated & PVC Sheathed
unarmoured telephone cable with 0.5 mm dia. Solid
Annealed electrolytic grade bare Copper Conductor as per
IS: 8130/84 &confirming to TEC specification GR /
WIR/06-03 March 2002 in existing surface or recessed
conduit/casing capping. including ferruling on each pair for
Identification etc. as required. For additional technical
parameters of product / work refer Annexure 'A' attached
with this BSR
109 2 pair 350.00 Mtr 18.00 6300.00 #VALUE!
110 10 pair 50.00 Mtr 83.00 4150.00 #VALUE!
111

Supply, Drawing and Testing of 4 pair, 23 AWG Solid

Bare Copper wire insulated with PVC, UTP (Unshielded
Twisted Pair), Category 6, Class E, 100 Ohm Impedance,
Indoor Cable as per latest ammendments of
ANSI/TIA/EIA-568 , The copper conductors should be
balanced twisted in pairs, seperated by a cross-member
fluted pair divider & protected by PVC Jacket. Certified
performance in a 4-connector configuration upto 100 Mtrs
channel requirements & transmission frequencies up to
250 Mhz. in existing MS/PVC Conduits/casing capping
including making connections to Information outlets and
Patch Panels with jack & ferruling at both ends for
identification with necessary tools for punching, stripping,
crimping and testing etc as required complete in all
respect. All as per pre approved by Engineer in charge.
For additional technical parameters of products/ work ,
refer Annexure "A" attached with this BSR . 400.00 Mtr 49.00 19600.00 #VALUE!
112

Supply and Installation of unsheilded/360 degree sheilded

Information outlets made of high impact plastic body with
ABS, FR Grade halogen free material with provision for
protection against dust in jack, suitable for Cat 6/6A
application complying to latest ammendments, According.
to Cat. 6/6A channel, It should support channel as well as
components requirements of Cat.6/6A standards at
frequencies of up to 250 to 500 Mhz. Cat 6/6A
unshielded/shielded Jack should be suitable to terminate
4 pair, 23/24 AWG solid/stranded wire diameters, using
100 Ohm unshielded/shielded balance twisted pair cable,
the jack should have tooless/impact termination on
reliable copper tin plated Insulation displacement contact,
with easy lock mechanism, It supports IEC 60603-7-4 and
complied with ANSI/TIA/EIA 568 C.2 standard. jack
should be RJ11,RJ12 & RJ45 compatible. Should support
Ethernet 1.2 Gb/s ATM,Digital video and
broadband/baseband analog video, Voice over internet
protocal (VOIP) Specifications in existing modular/MS
Boxes along with necessory connections as required.All
as per pre approved by Engineer in charge. For additional
technical parameters of products/ work , refer Annexure
"A" attached with this BSR .
113
Cat 6, Un-sheilded Information Outlet 11.00 Nos 398.00 4378.00 #VALUE!
114

Supply & fixing of square Faceplate for Flush / Surface

Mount Information Outlets Single/Dual or Quad Aperture ,
material should be PC+ABS body, Suitable for RJ45
unshielded/shielded connection modules. Should match
with I. O. OEM. Dimensions should be 86mm X 86mm as
required complete in all respect. All as per pre approved
by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
115 Single Aperture 11.00 Nos 81.00 891.00 #VALUE!
116

Supply, Installation, Testing and Comissioning of Rack

mounted 19" 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS
chasis, powder coated, sheet steel, made of plastic (ABS),
Modular Patch Panels with Rear Cable management
system and mounting hardware to mount the patch panel.
Should have port identification numbers printed/engraved
on front of the panel. Etc. as required.All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
117
Modular Patch Panel Loaded with Cat -6 I/O 1.00 Nos 8765.00 8765.00 #VALUE!
118
Supply , Installation, Testing and Comissioning of
Managed Layer-2 Intelligent 10/100 Ethernet Switch
providing 24 x 10/100/1000 MBPS Giga Ethernet ports /
with min 2 SFP Giga Ports (provision for Fiber Giga
connectivity) with related LAN Base Software including
making connections etc as required.All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR . 1.00 Nos 36783.00 36783.00 #VALUE!
119

P/Laying ISI marked P.V.C. insulated submersible cable

confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV
grade . Wire should be made from 99.90 % purity copper,
stranding in acc. to IS:8130/IEC 60228 for lower watt loss
, oxygen free for less chances of oxidization, insulation
PVC type A/C/D , flame retardant as per IS 10810-53,
better amperage rating as per IS:3961 part 5, existing
pipe / open trench / Cable tray / on surface including
making connection etc. as required. For additional
technical parameters of product / work refer Annexure 'A'
attached with this BSR
120
4.0 Sq.mm 3 core flat / Round 120.00 Mtr 214.00 25680.00 #VALUE!
121

Supplying and making one end termination with Nickel

plated heavy duty brass single compression gland (as per
IS 12943-1990)) SIBG type consisting of Check Nut,
Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber
Ring, Compression Nut, heavy duty aluminium lugs (as
per IS 8309 -1993) duly crimped with crimping tool, PVC
tape as per IS 8337-1976 of following size of PVC
insulated & PVC sheathed/ XLPE aluminium conductor
cable of 1100 volt grade as required.All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
122 3.5 x 25.0 sq.mm 2.00 Nos 231.00 462.00 #VALUE!
123

Supply & Installation of IP-20 & IK-08 , UL Listed Wall

mounted Double Section Communication enclosure
(Rack) made from powder coated (60 to 80 Micron) CRCA
sheet, front sturdy sheet steel frame folded from one
piece and welded with minimum 5mm toughened glass
door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with
All round protective channel on the door aperture, lock
integrated on front door, top and bottom cover with cable
entry provision with gland plates, integrated side walls, 2
pair of 19" angles with wall mounting provision on wall.
Accessories like: 1 No of 19" 1U Horizontal Cable
manager, 1 No of 90 cfm 230V AC Fan with 1 mts long
cable, mounting hardware , 1 No of 19" 1U, mountable
socket strips with 5 nos of 5A universal sockets with 2 mts
long power chord for supplying power to switches, fans
etc along with earth continuity kit, indicator, moulded
power supply cable. fixing on wall with Suitable Anchor
fastner etc as required.All as per pre approved by
Engineer in charge. For additional technical parameters
of products/ work , refer Annexure "A" attached with this
BSR .
124
6 U Rack with Width 600 mm & Depth 400 mm + 100 mm 1.00 Nos 9173.00 9173.00 #VALUE!
125

Providing & Fixing of IP-20 LED Recessed / Surface

Mounted, Round / Sqaure SMD Mid Power LED
Downlight with power coated die-cast aluminum housing
with UV Stabilized non yellowish Diffuser with BIS
complience 2.5 KV surge protected Isolated driver, with
Short & Open circuit protection, having efficiency > 85% .
System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % ,
Pf.≥0.95, CRI >80, life time of minimum 50000 Burning
Hours with , 70% of intial Lumen maintaned till life ends ,
CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per
ANSI Bin) , maximum power consumption should not
more than the specified rating and Fixture shall be of BIS
standard and trade mark certificate ( T.C.). Manufactures
Word Mark/ Name Engraved/ Embossing/ Screen printing
on housing.
126 Surface Mounting (with extruded alumn. Housing )
127 Minimum lumen output 1950 lm 20.00 Nos 1620.00 32400.00 #VALUE!
128
Providing & Laying of Polypropylene rope Confirming to
IS:5175 for submersible pump of following sizes. complete
in all respect. All as per pre approved by Engineer in
charge. For additional technical parameters of products/
work , refer Annexure "A" attached with this BSR .
129
16mm (suitable above 50mm & up to 75mm OD pipe) 125.00 Mtr 54.00 6750.00 #VALUE!
130

Supply , Installation, Testing and Comissioning of IS:1475

marked self contained drinking water cooler with
hermetically sealed compressor,non CFC refrigerent
suitable for operation on 230V/1pH/50Hz AC supply,Full
stainless steel (SS304)body (0.8 mm thick) and tank (0.5
mm thick) , stainless steel water tray,minimum two nos
Brass Chrome plated faucets and suitable drainage
system complete in all respect with required height MS
fabricated and Painted Angle iron frame ( Cost of frame
to be paid Extra )complete in all respect of the following
capacity. All as per pre approved by Engineer in charge.
For additional technical parameters of products/ work ,
refer Annexure "A" attached with this BSR .
131
cooling capacity 150 Ltr./Hr. and storage capacity 150 Ltrs 1.00 Nos 75878.00 75878.00 #VALUE!
132

P & F Krone module with base frame in the recess /

surface made out of 1.2 mm thick sheet steel box, front
openable, having locking arrangements duly powder
painted,including dressing, ferruling and punching of
telephone cable with krone tool etc. as required. For
additional technical parameters of product / work refer
Annexure 'A' attached with this BSR
133 10 Pairs 1.00 Nos 943.00 943.00 #VALUE!
134

Supply , Installation and Testing of 4 pair, 100 Ohm

impedance, Cat 6/6A /Class E/Ea patch cords should be
constructed of minimum 23/24 AWG, stranded bare
Copper cable with FRPVC/LSZH Jacket, with an
enhanced performance by factory moulded RJ45
connectors with strain relief boots as per ANSI/TIA/EIA
568-C.2 suitable for Cat 6/6A application complying to
latest ammendments Category 6/6A Standards,
According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC
60603-7-51, EN 60603-7, IEEE 802.3an minimum
requirement for 1G BASE-T to 10G BASE-T performance.
Patch cords shall be straight thru cable compatible with
both T568-A and T568-B wiring schemes, should support
IEEE 802.3af / IEEE 802.3at for POE applications,
Minimum 750 to 1000 mating cycles in plug contacts for
long durability, Should support Ethernet 10GBASE-T, 1.2
Gb/s ATM, Token ring 4/16, Digital video and
broadband/baseband analog video, Voice over internet
protocal (VOIP).All as per pre approved by Engineer in
charge. For additional technical parameters of products/
work , refer Annexure "A" attached with this BSR .
135 Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair)
Patch Cord
136
1 Mtr 11.00 Nos 223.00 2453.00 #VALUE!
137 2 Mtr 11.00 Nos 290.00 3190.00 #VALUE!
 138

Supply , Installation, Testing and Comissioning of Inverter

type Air Cooled Hi Wall split type Air conditioners with
latest star rating system as per BEE amended upto date
complete with Indoor unit(IDU), Out door unit (ODU),
surface / concealed copper Refrigerant piping with
insulation (closed cell elastomeric nitrile rubber tubular
pipe section) upto 3 Mtr (IDU to ODU), copper power
cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green
Refrigerant, wireless Remote control, suitable for working
between 230V +/- 10% with low & high voltage cutoff and
50 hz , single phase AC supply capable of performing
cooling, dehumidification, air circulation of following
capacity with Scroll / rotary compressor. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
139
1.5 TR ISEER not less then 3.8 2.00 Each 48875.00 97750.00 #VALUE!
140

Supply, Fixing and testing of following capacity ISO

certified company made wall mounted stabilizer having
output voltage variation from 200 V to 250 V(+/-5%) with
input voltage variation from 170 V to 260 V, time delay
facility from 2 to 4 minute and high cutoff at 270 V with
providing of 16 Amp /20 Amp Industrial plug top making
connection etc complete in all respect. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR .
141 4 kVA 2.00 Each 3375.00 6750.00 #VALUE!
142 Making hole in stone masonary/ RCC wall/ RCC slab with
core cutter for accomodating refrigerant pipe/ drain pipe/
MS pipe/ cables etc of following dia
143 50 mm dia per running inch length 30.00 Per inch 80.00 2400.00 #VALUE!
144
Supply & fixing MS powder coated stand suitable for
1.0/1.5/ 2.0 Tr outdoor type of Split AC. All as per pre
approved by Engineer in charge. For additional technical
parameters of products/ work , refer Annexure "A"
attached with this BSR . 2.00 Each 580.00 1160.00 #VALUE!
145

Providing & Fixing of Recessed/surface mounting heavy

duty horizontal type TPN phase selector Distribution board
with Metal end box made out from Galvanized steel /
CRCA sheet not less then 1.2 mm thick conforming to IS-
8623-1 & 3 / IEC 61439- 1 & 3. powder painted with
reversible door (for double door DB only ) complete with
100 amp. insulated copper bus bar/ shorting link , neutral
link, earth link , color coded interconnecting wire set of
suitable rating and din bar,masking sheet provided with 3
nos 63 Amp rotary switches,3 nos rocker switches for
phase identifications etc. making internal DB terminations
with copper lugs, ferrules, detachable gland plate,
including making connections, testing etc. as required.
OEM shall have submit NABL / CPRI / ERDA accrediated
lab type test reports & All as per pre approved by
Engineer in charge.For additional technical parameters of
product / work refer Annexure 'A' attached with this BSR
146 Double door. IK-09 and IP-43 with Metal end box
147
4 way 1.00 each 11538.00 11538.00 #VALUE!
Total in Figures 1095186.00 #VALUE!

Quoted Rate in Figures Select 0.00 #VALUE!

Quoted Rate in Words #VALUE!
Please Enable Macros to View BoQ information
Q information