Car Scanner ELM OBD2

DTC report
Selected brand: Range Rover

============1==============
P0693(11)
Raw code: 069311
ECU: Engine control unit
Status: Test failed, Test failed (current drive cycle), Pending, Confirmed, Test
failed since last DTC clear
Engine coolant blower motor 2 - circuit low

============2==============
P0693(11)
Raw code: 069311
ECU: Engine control unit
Status: Test failed, Test failed (current drive cycle), Pending, Confirmed, Test
failed since last DTC clear
Engine coolant blower motor 2 - circuit low

============3==============
P2279(64)
Raw code: 227964
ECU: Engine control unit
Status: Test not completed during this operation cycle
Intake air leak

============4==============
P006A(85)
Raw code: 006A85
ECU: Engine control unit
Status: Test not completed during this operation cycle
MAP sensor/MAF or VAF sensor bank 1 - correlation

============5==============
P006A(84)
Raw code: 006A84
ECU: Engine control unit
Status: Test not completed during this operation cycle
MAP sensor/MAF or VAF sensor bank 1 - correlation

============6==============
P023B(11)
Raw code: 023B11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Turbocharger (TC) intercooler coolant pump - circuit low

============7==============
P220B(01)
Raw code: 220B01
ECU: Engine control unit
Status: Test not completed during this operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - supply voltage circuit malfunction

============8==============
P05FF(84)
Raw code: 05FF84
ECU: Engine control unit
Status: Test not completed during this operation cycle

============9==============
P0571(62)
Raw code: 057162
ECU: Engine control unit
Status: Test not completed during this operation cycle
Cruise control/brake switch A - circuit malfunction

============10==============
P0563(17)
Raw code: 056317
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
System voltage - high

============11==============
P0562(16)
Raw code: 056216
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
System voltage - low

============12==============
P1405(00)
Raw code: 140500
ECU: Engine control unit
Status: Test not completed during this operation cycle
DPFE Sensor Upstream Hose Off Or Plugged

============13==============
P226D(00)
Raw code: 226D00
ECU: Engine control unit
Status: Test not completed during this operation cycle

============14==============
P0703(62)
Raw code: 070362
ECU: Engine control unit
Status: Test not completed during this operation cycle
Brake switch B - circuit malfunction

============15==============
P215B(40)
Raw code: 215B40
ECU: Engine control unit
Status: Test not completed during this operation cycle
Vehicle speed sensor (VSS)/transmission output shaft speed (OSS) sensor -
correlation

============16==============
P215B(00)
Raw code: 215B00
ECU: Engine control unit
Status: Test not completed during this operation cycle
Vehicle speed sensor (VSS)/transmission output shaft speed (OSS) sensor -
correlation

============17==============
P0420(00)
Raw code: 042000
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Catalytic converter system, bank 1 - efficiency below threshold

============18==============
P2493(13)
Raw code: 249313
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas recirculation (EGR) cooler bypass flap position sensor, bank 1 -
range/performance problem

============19==============
P2494(11)
Raw code: 249411
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas recirculation (EGR) cooler bypass flap position sensor, bank 1 -
circuit low

============20==============
P2080(64)
Raw code: 208064
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas temperature (EGT) sensor 1, bank 1 - range/performance problem

============21==============
P242B(64)
Raw code: 242B64
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas temperature sensor 3, bank 1 - circuit range/performance

============22==============
P246F(64)
Raw code: 246F64
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas temperature sensor 4, bank 1 - circuit range/performance

============23==============
P263E(4B)
Raw code: 263E4B
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============24==============
P22FE(85)
Raw code: 22FE85
ECU: Engine control unit
Status: Test not completed during this operation cycle

============25==============
P22FE(84)
Raw code: 22FE84
ECU: Engine control unit
Status: Test not completed during this operation cycle

============26==============
P229E(13)
Raw code: 229E13
ECU: Engine control unit
Status: Test not completed during this operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit malfunction

============27==============
P22A1(17)
Raw code: 22A117
ECU: Engine control unit
Status: Test not completed during this operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit high

============28==============
P22A0(16)
Raw code: 22A016
ECU: Engine control unit
Status: Test not completed during this operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit low

============29==============
P229E(14)
Raw code: 229E14
ECU: Engine control unit
Status: Test not completed during this operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit malfunction

============30==============
P26CA(13)
Raw code: 26CA13
ECU: Engine control unit
Status: Test not completed during this operation cycle

============31==============
P0546(17)
Raw code: 054617
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas temperature (EGT) sensor 1, bank 1 - high input

============32==============
P205B(85)
Raw code: 205B85
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant temperature sensor - circuit range/performance

============33==============
P205B(84)
Raw code: 205B84
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant temperature sensor - circuit range/performance

============34==============
P203B(31)
Raw code: 203B31
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant level sensor - circuit range/performance

============35==============
P2080(62)
Raw code: 208062
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas temperature (EGT) sensor 1, bank 1 - range/performance problem

============36==============
P242B(62)
Raw code: 242B62
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas temperature sensor 3, bank 1 - circuit range/performance

============37==============
P246F(62)
Raw code: 246F62
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas temperature sensor 4, bank 1 - circuit range/performance

============38==============
P24C2(62)
Raw code: 24C262
ECU: Engine control unit
Status: Test not completed during this operation cycle

============39==============
P2453(28)
Raw code: 245328
ECU: Engine control unit
Status: Test not completed during this operation cycle
Diesel particulate filter (DPF) pressure sensor A - circuit malfunction

============40==============
P244A(95)
Raw code: 244A95
ECU: Engine control unit
Status: Test not completed during this operation cycle
Diesel particulate filter (DPF) - differential pressure too low

============41==============
P20BA(19)
Raw code: 20BA19
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant heater control A - circuit performance problem

============42==============
P20BA(17)
Raw code: 20BA17
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant heater control A - circuit performance problem

============43==============
P20BA(18)
Raw code: 20BA18
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant heater control A - circuit performance problem

============44==============
P20BA(16)
Raw code: 20BA16
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant heater control A - circuit performance problem

============45==============
P209F(19)
Raw code: 209F19
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============46==============
P209F(17)
Raw code: 209F17
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============47==============
P209F(18)
Raw code: 209F18
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============48==============
P209F(16)
Raw code: 209F16
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============49==============
P0683(88)
Raw code: 068388
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug control module to ECM/PCM communication error

============50==============
P0671(96)
Raw code: 067196
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 1 - circuit malfunction

============51==============
P0672(96)
Raw code: 067296
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 2 - circuit malfunction

============52==============
P0673(96)
Raw code: 067396
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 3 - circuit malfunction

============53==============
P0674(96)
Raw code: 067496
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 4 - circuit malfunction

============54==============
P0675(96)
Raw code: 067596
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 5 - circuit malfunction

============55==============
P0676(96)
Raw code: 067696
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 6 - circuit malfunction

============56==============
P066A(11)
Raw code: 066A11
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 1 - circuit low

============57==============
P066C(11)
Raw code: 066C11
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 2 - circuit low
============58==============
P066E(11)
Raw code: 066E11
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 3 - circuit low

============59==============
P067A(11)
Raw code: 067A11
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 4 - circuit low

============60==============
P067C(11)
Raw code: 067C11
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 5 - circuit low

============61==============
P067E(11)
Raw code: 067E11
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug, cylinder 6 - circuit low

============62==============
P052F(13)
Raw code: 052F13
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug control module - system voltage malfunction

============63==============
P064C(96)
Raw code: 064C96
ECU: Engine control unit
Status: Test not completed during this operation cycle
Glow plug control module - malfunction

============64==============
P22FE(64)
Raw code: 22FE64
ECU: Engine control unit
Status: Test not completed during this operation cycle

============65==============
P0686(11)
Raw code: 068611
ECU: Engine control unit
Status: Test not completed during this operation cycle
Engine control (EC) relay - circuit low

============66==============
P2002(00)
Raw code: 200200
ECU: Engine control unit
Status: Test not completed during this operation cycle
Particulate trap, bank 1 - efficiency below threshold

============67==============
P20EE(04)
Raw code: 20EE04
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============68==============
P20EE(92)
Raw code: 20EE92
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============69==============
P20EE(97)
Raw code: 20EE97
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============70==============
P2BA9(00)
Raw code: 2BA900
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx), limit exceeded - insufficient reductant quality

============71==============
P2BA9(92)
Raw code: 2BA992
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx), limit exceeded - insufficient reductant quality

============72==============
P208B(00)
Raw code: 208B00
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant pump control - range/performance problem

============73==============
P208E(73)
Raw code: 208E73
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant injector 1, bank 1 - injector stuck closed

============74==============
P21C5(64)
Raw code: 21C564
ECU: Engine control unit
Status: Test not completed during this operation cycle

============75==============
P2195(85)
Raw code: 219585
ECU: Engine control unit
Status: Test not completed during this operation cycle
Heated oxygen sensor (HO2S) 1, bank 1 - signal stuck lean

============76==============
P2196(84)
Raw code: 219684
ECU: Engine control unit
Status: Test not completed during this operation cycle
Heated oxygen sensor (HO2S) 1, bank 1 - signal stuck rich

============77==============
P22A7(01)
Raw code: 22A701
ECU: Engine control unit
Status: Test not completed during this operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1, heater sense circuit - range/performance
problem

============78==============
P229F(28)
Raw code: 229F28
ECU: Engine control unit
Status: Test not completed during this operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit range/performance

============79==============
U0104(87)
Raw code: C10487
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Data bus, cruise control module - no communication

============80==============
U012A(87)
Raw code: C12A87
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Lost communication with chassis control module A

============81==============
U0255(87)
Raw code: C25587
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Lost communication with front display interface module

============82==============
U0106(87)
Raw code: C10687
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Data bus, glow plug control module - no communication

============83==============
U019C(87)
Raw code: C19C87
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============84==============
P228F(22)
Raw code: 228F22
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel pressure regulator 1, learning limit exceeded - signal too high

============85==============
P228E(21)
Raw code: 228E21
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel pressure regulator 1, learning limit exceeded - signal too low

============86==============
P249C(00)
Raw code: 249C00
ECU: Engine control unit
Status: Test not completed during this operation cycle
Excessive time to enter closed loop reductant injection control

============87==============
P16A3(00)
Raw code: 16A300
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============88==============
P16A4(00)
Raw code: 16A400
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============89==============
P16A5(00)
Raw code: 16A500
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============90==============
P049B(00)
Raw code: 049B00
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas recirculation (EGR) B - insufficient flow detected

============91==============
P0401(00)
Raw code: 040100
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas recirculation (EGR) system - insufficient flow detected

============92==============
P049C(00)
Raw code: 049C00
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas recirculation (EGR) valve actuator B - excessive flow detected

============93==============
P0402(00)
Raw code: 040200
ECU: Engine control unit
Status: Test not completed during this operation cycle
Exhaust gas recirculation (EGR) system - excessive flow detected

============94==============
P034A(67)
Raw code: 034A67
ECU: Engine control unit
Status: Test not completed during this operation cycle

============95==============
P0605(47)
Raw code: 060547
ECU: Engine control unit
Status: Test not completed during this operation cycle
Engine control module (ECM) - ROM error

============96==============
P060A(49)
Raw code: 060A49
ECU: Engine control unit
Status: Test not completed during this operation cycle
Engine control module (ECM), monitoring processor performance problem

============97==============
P0191(17)
Raw code: 019117
ECU: Engine control unit
Status: Test not completed during this operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============98==============
P0191(16)
Raw code: 019116
ECU: Engine control unit
Status: Test not completed during this operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============99==============
P0191(85)
Raw code: 019185
ECU: Engine control unit
Status: Test not completed during this operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============100==============
P0191(84)
Raw code: 019184
ECU: Engine control unit
Status: Test not completed during this operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============101==============
P20EE(96)
Raw code: 20EE96
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============102==============
P20EE(00)
Raw code: 20EE00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============103==============
P20FE(97)
Raw code: 20FE97
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============104==============
P20FE(00)
Raw code: 20FE00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============105==============
P20E8(85)
Raw code: 20E885
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant pressure - pressure too low

============106==============
P20E8(84)
Raw code: 20E884
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant pressure - pressure too low
============107==============
P20E9(85)
Raw code: 20E985
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant pressure - pressure too high

============108==============
P20E9(84)
Raw code: 20E984
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant pressure - pressure too high

============109==============
P20FB(00)
Raw code: 20FB00
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant pump B - range/performance problem

============110==============
P208B(64)
Raw code: 208B64
ECU: Engine control unit
Status: Test not completed during this operation cycle
Reductant pump control - range/performance problem

============111==============
P214E(19)
Raw code: 214E19
ECU: Engine control unit
Status: Test not completed during this operation cycle

============112==============
P209F(96)
Raw code: 209F96
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============113==============
P202B(13)
Raw code: 202B13
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - circuit low

============114==============
P202C(15)
Raw code: 202C15
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - circuit high
============115==============
P0693(11)
Raw code: 069311
ECU: Engine control unit
Status: Test failed, Test failed (current drive cycle), Pending, Confirmed, Test
failed since last DTC clear
Engine coolant blower motor 2 - circuit low

============116==============
P2279(64)
Raw code: 227964
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Intake air leak

============117==============
P006A(85)
Raw code: 006A85
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
MAP sensor/MAF or VAF sensor bank 1 - correlation

============118==============
P006A(84)
Raw code: 006A84
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
MAP sensor/MAF or VAF sensor bank 1 - correlation

============119==============
P023B(11)
Raw code: 023B11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Turbocharger (TC) intercooler coolant pump - circuit low

============120==============
P220B(01)
Raw code: 220B01
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - supply voltage circuit malfunction

============121==============
P0563(17)
Raw code: 056317
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
System voltage - high

============122==============
P0562(16)
Raw code: 056216
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
System voltage - low

============123==============
P06DA(13)
Raw code: 06DA13
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine oil pressure control - circuit open

============124==============
P06DB(11)
Raw code: 06DB11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine oil pressure control - circuit low

============125==============
P1405(00)
Raw code: 140500
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
DPFE Sensor Upstream Hose Off Or Plugged

============126==============
P2380(23)
Raw code: 238023
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============127==============
P2380(24)
Raw code: 238024
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============128==============
P226D(00)
Raw code: 226D00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============129==============
P0087(71)
Raw code: 008771
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail/system pressure too low

============130==============
P0088(71)
Raw code: 008871
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail/system pressure too high

============131==============
P0087(21)
Raw code: 008721
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail/system pressure too low

============132==============
P0088(72)
Raw code: 008872
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail/system pressure too high

============133==============
P0087(84)
Raw code: 008784
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail/system pressure too low

============134==============
P0088(22)
Raw code: 008822
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail/system pressure too high

============135==============
P0615(13)
Raw code: 061513
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Starter motor relay - circuit malfunction

============136==============
P0617(12)
Raw code: 061712
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Starter motor relay - circuit high

============137==============
P0616(11)
Raw code: 061611
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Starter motor relay - circuit low

============138==============
P0512(14)
Raw code: 051214
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Starter request circuit - malfunction

============139==============
P215B(40)
Raw code: 215B40
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Vehicle speed sensor (VSS)/transmission output shaft speed (OSS) sensor -
correlation

============140==============
P215B(00)
Raw code: 215B00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Vehicle speed sensor (VSS)/transmission output shaft speed (OSS) sensor -
correlation

============141==============
P0420(00)
Raw code: 042000
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Catalytic converter system, bank 1 - efficiency below threshold

============142==============
P2493(13)
Raw code: 249313
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) cooler bypass flap position sensor, bank 1 -
range/performance problem

============143==============
P2494(11)
Raw code: 249411
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) cooler bypass flap position sensor, bank 1 -
circuit low

============144==============
P0A14(13)
Raw code: 0A1413
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine mounting control A - open circuit

============145==============
P0A15(11)
Raw code: 0A1511
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine mounting control A - circuit low

============146==============
P2080(64)
Raw code: 208064
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature (EGT) sensor 1, bank 1 - range/performance problem

============147==============
P242B(64)
Raw code: 242B64
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 3, bank 1 - circuit range/performance

============148==============
P246F(64)
Raw code: 246F64
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 4, bank 1 - circuit range/performance

============149==============
P263E(4B)
Raw code: 263E4B
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============150==============
P22FE(85)
Raw code: 22FE85
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============151==============
P22FE(84)
Raw code: 22FE84
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============152==============
P229E(13)
Raw code: 229E13
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit malfunction

============153==============
P22A1(17)
Raw code: 22A117
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit high

============154==============
P22A0(16)
Raw code: 22A016
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit low

============155==============
P229E(14)
Raw code: 229E14
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit malfunction

============156==============
P26CA(13)
Raw code: 26CA13
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============157==============
P0299(77)
Raw code: 029977
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Turbocharger (TC)/supercharger (SC) - low boost

============158==============
P0234(77)
Raw code: 023477
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Turbocharger (TC), engine boost condition - limit exceeded

============159==============
P0627(13)
Raw code: 062713
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel pump (FP) control - open circuit

============160==============
P0628(11)
Raw code: 062811
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel pump (FP) control - circuit low

============161==============
P247A(85)
Raw code: 247A85
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 3, bank 1 - out of range

============162==============
P247A(84)
Raw code: 247A84
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 3, bank 1 - out of range

============163==============
P247B(85)
Raw code: 247B85
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 4, bank 1 - out of range

============164==============
P247B(84)
Raw code: 247B84
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 4, bank 1 - out of range

============165==============
P2478(85)
Raw code: 247885
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 1, bank 1 - out of range

============166==============
P2478(84)
Raw code: 247884
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 1, bank 1 - out of range
============167==============
P0546(17)
Raw code: 054617
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature (EGT) sensor 1, bank 1 - high input

============168==============
P205B(85)
Raw code: 205B85
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant temperature sensor - circuit range/performance

============169==============
P205B(84)
Raw code: 205B84
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant temperature sensor - circuit range/performance

============170==============
P20FD(12)
Raw code: 20FD12
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pump B - control circuit high

============171==============
P208B(4B)
Raw code: 208B4B
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pump control - range/performance problem

============172==============
P208D(12)
Raw code: 208D12
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pump control - circuit high

============173==============
P203B(31)
Raw code: 203B31
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant level sensor - circuit range/performance

============174==============
P0403(13)
Raw code: 040313
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) - circuit malfunction

============175==============
P045A(13)
Raw code: 045A13
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) valve actuator B - circuit malfunction

============176==============
P0475(13)
Raw code: 047513
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas pressure control valve - circuit malfunction

============177==============
P2080(62)
Raw code: 208062
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature (EGT) sensor 1, bank 1 - range/performance problem

============178==============
P242B(62)
Raw code: 242B62
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 3, bank 1 - circuit range/performance

============179==============
P246F(62)
Raw code: 246F62
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas temperature sensor 4, bank 1 - circuit range/performance

============180==============
P24C2(62)
Raw code: 24C262
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============181==============
P2453(28)
Raw code: 245328
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Diesel particulate filter (DPF) pressure sensor A - circuit malfunction
============182==============
P0105(85)
Raw code: 010585
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor - circuit
malfunction

============183==============
P0105(84)
Raw code: 010584
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Manifold absolute pressure (MAP) sensor/barometric pressure (BARO) sensor - circuit
malfunction

============184==============
P2453(2A)
Raw code: 24532A
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Diesel particulate filter (DPF) pressure sensor A - circuit malfunction

============185==============
P244A(95)
Raw code: 244A95
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Diesel particulate filter (DPF) - differential pressure too low

============186==============
P21C7(13)
Raw code: 21C713
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============187==============
P21C8(11)
Raw code: 21C811
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============188==============
P2100(13)
Raw code: 210013
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Throttle actuator control (TAC) motor - open circuit

============189==============
P0045(13)
Raw code: 004513
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Turbocharger (TC) boost control solenoid/supercharger (SC) boost control solenoid -
open circuit

============190==============
P20BA(19)
Raw code: 20BA19
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant heater control A - circuit performance problem

============191==============
P20BA(17)
Raw code: 20BA17
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant heater control A - circuit performance problem

============192==============
P20BA(18)
Raw code: 20BA18
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant heater control A - circuit performance problem

============193==============
P20BA(16)
Raw code: 20BA16
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant heater control A - circuit performance problem

============194==============
P209F(19)
Raw code: 209F19
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============195==============
P209F(17)
Raw code: 209F17
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============196==============
P209F(18)
Raw code: 209F18
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============197==============
P209F(16)
Raw code: 209F16
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============198==============
P0683(88)
Raw code: 068388
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug control module to ECM/PCM communication error

============199==============
P0671(96)
Raw code: 067196
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 1 - circuit malfunction

============200==============
P0672(96)
Raw code: 067296
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 2 - circuit malfunction

============201==============
P0673(96)
Raw code: 067396
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 3 - circuit malfunction

============202==============
P0674(96)
Raw code: 067496
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 4 - circuit malfunction

============203==============
P0675(96)
Raw code: 067596
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 5 - circuit malfunction
============204==============
P0676(96)
Raw code: 067696
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 6 - circuit malfunction

============205==============
P066A(11)
Raw code: 066A11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 1 - circuit low

============206==============
P066C(11)
Raw code: 066C11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 2 - circuit low

============207==============
P066E(11)
Raw code: 066E11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 3 - circuit low

============208==============
P067A(11)
Raw code: 067A11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 4 - circuit low

============209==============
P067C(11)
Raw code: 067C11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 5 - circuit low

============210==============
P067E(11)
Raw code: 067E11
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug, cylinder 6 - circuit low

============211==============
P052F(13)
Raw code: 052F13
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug control module - system voltage malfunction

============212==============
P064C(96)
Raw code: 064C96
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Glow plug control module - malfunction

============213==============
P22FE(64)
Raw code: 22FE64
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============214==============
P0A11(00)
Raw code: 0A1100
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
DC to DC converter enable - circuit open

============215==============
P0686(11)
Raw code: 068611
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control (EC) relay - circuit low

============216==============
P2002(00)
Raw code: 200200
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Particulate trap, bank 1 - efficiency below threshold

============217==============
P20EE(04)
Raw code: 20EE04
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============218==============
P20EE(92)
Raw code: 20EE92
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============219==============
P20EE(97)
Raw code: 20EE97
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============220==============
P2BA9(00)
Raw code: 2BA900
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx), limit exceeded - insufficient reductant quality

============221==============
P2BA9(92)
Raw code: 2BA992
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx), limit exceeded - insufficient reductant quality

============222==============
P208B(00)
Raw code: 208B00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pump control - range/performance problem

============223==============
P208E(73)
Raw code: 208E73
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant injector 1, bank 1 - injector stuck closed

============224==============
P21C5(64)
Raw code: 21C564
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============225==============
P2195(85)
Raw code: 219585
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Heated oxygen sensor (HO2S) 1, bank 1 - signal stuck lean

============226==============
P2196(84)
Raw code: 219684
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Heated oxygen sensor (HO2S) 1, bank 1 - signal stuck rich

============227==============
P22A7(01)
Raw code: 22A701
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1, heater sense circuit - range/performance
problem

============228==============
P229F(28)
Raw code: 229F28
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxides (NOx) sensor 2, bank 1 - circuit range/performance

============229==============
P0602(00)
Raw code: 060200
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM) - programming error

============230==============
P2610(84)
Raw code: 261084
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM) - internal engine off timer performance

============231==============
P2610(64)
Raw code: 261064
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM) - internal engine off timer performance

============232==============
P0633(00)
Raw code: 063300
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Immobilizer key not programmed - ECM/PCM

============233==============
U0426(00)
Raw code: C42600
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Invalid data received - immobilizer control module

============234==============
P0513(00)
Raw code: 051300
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Incorrect immobilizer key

============235==============
U0167(00)
Raw code: C16700
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Data bus, immobilizer control module - no communication

============236==============
U1A14(93)
Raw code: DA1493
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============237==============
U0300(81)
Raw code: C30081
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Control module - internal software incompatibility

============238==============
U1A14(94)
Raw code: DA1494
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============239==============
U0104(87)
Raw code: C10487
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Data bus, cruise control module - no communication

============240==============
U012A(87)
Raw code: C12A87
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Lost communication with chassis control module A

============241==============
U0255(87)
Raw code: C25587
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Lost communication with front display interface module

============242==============
U0106(87)
Raw code: C10687
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Data bus, glow plug control module - no communication

============243==============
U019C(87)
Raw code: C19C87
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============244==============
P228F(22)
Raw code: 228F22
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel pressure regulator 1, learning limit exceeded - signal too high

============245==============
P228E(21)
Raw code: 228E21
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel pressure regulator 1, learning limit exceeded - signal too low

============246==============
P249C(00)
Raw code: 249C00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Excessive time to enter closed loop reductant injection control

============247==============
U2012(02)
Raw code: E01202
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Communication Bus Error (Non SCP)

============248==============
U2012(86)
Raw code: E01286
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Communication Bus Error (Non SCP)

============249==============
U2012(29)
Raw code: E01229
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Communication Bus Error (Non SCP)

============250==============
U2012(64)
Raw code: E01264
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Communication Bus Error (Non SCP)

============251==============
P16A3(00)
Raw code: 16A300
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============252==============
P16A4(00)
Raw code: 16A400
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============253==============
P16A5(00)
Raw code: 16A500
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============254==============
P049B(00)
Raw code: 049B00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) B - insufficient flow detected

============255==============
P0401(00)
Raw code: 040100
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) system - insufficient flow detected

============256==============
P049C(00)
Raw code: 049C00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) valve actuator B - excessive flow detected

============257==============
P0402(00)
Raw code: 040200
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas recirculation (EGR) system - excessive flow detected

============258==============
P034A(67)
Raw code: 034A67
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============259==============
P0476(77)
Raw code: 047677
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas pressure control valve - range/performance problem

============260==============
P048A(73)
Raw code: 048A73
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas control actuator - actuator stuck closed

============261==============
P047F(72)
Raw code: 047F72
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Exhaust gas pressure control valve - valve stuck open

============262==============
P2635(00)
Raw code: 263500
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel pump (FP) A - low flow/performance problem

============263==============
P068A(00)
Raw code: 068A00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control (EC) relay - shut-off early
============264==============
P0687(73)
Raw code: 068773
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control (EC) relay - short to earth

============265==============
P0605(47)
Raw code: 060547
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM) - ROM error

============266==============
P060A(00)
Raw code: 060A00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM), monitoring processor performance problem

============267==============
P060A(29)
Raw code: 060A29
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM), monitoring processor performance problem

============268==============
P060A(46)
Raw code: 060A46
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM), monitoring processor performance problem

============269==============
P060A(16)
Raw code: 060A16
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM), monitoring processor performance problem

============270==============
P060A(17)
Raw code: 060A17
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM), monitoring processor performance problem

============271==============
P060A(49)
Raw code: 060A49
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM), monitoring processor performance problem

============272==============
P0191(17)
Raw code: 019117
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============273==============
P0191(16)
Raw code: 019116
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============274==============
P0191(85)
Raw code: 019185
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============275==============
P0191(84)
Raw code: 019184
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Fuel rail pressure (FRP) sensor - range/performance problem

============276==============
P20EE(96)
Raw code: 20EE96
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============277==============
P20EE(00)
Raw code: 20EE00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Nitrogen oxide (NOx) sensor, catalyst, bank 1 - efficiency below threshold

============278==============
P20FE(97)
Raw code: 20FE97
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============279==============
P20FE(00)
Raw code: 20FE00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============280==============
P20E8(85)
Raw code: 20E885
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pressure - pressure too low

============281==============
P20E8(84)
Raw code: 20E884
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pressure - pressure too low

============282==============
P20E9(85)
Raw code: 20E985
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pressure - pressure too high

============283==============
P20E9(84)
Raw code: 20E984
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pressure - pressure too high

============284==============
P05F1(73)
Raw code: 05F173
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============285==============
P05F2(72)
Raw code: 05F272
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============286==============
P20FB(00)
Raw code: 20FB00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pump B - range/performance problem

============287==============
P208B(64)
Raw code: 208B64
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant pump control - range/performance problem

============288==============
P214E(19)
Raw code: 214E19
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============289==============
P060C(00)
Raw code: 060C00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine control module (ECM), main processor - performance problem

============290==============
P209F(96)
Raw code: 209F96
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - performance problem

============291==============
P202B(13)
Raw code: 202B13
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - circuit low

============292==============
P202C(15)
Raw code: 202C15
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reductant tank heater control - circuit high

============293==============
P2793(94)
Raw code: 279394
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear shift direction - circuit malfunction
============294==============
P0801(94)
Raw code: 080194
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reverse inhibit circuit - circuit malfunction

============295==============
P1706(94)
Raw code: 170694
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
High Vehicle Speed Observed in Park

============296==============
P164C(62)
Raw code: 164C62
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============297==============
P0613(04)
Raw code: 061304
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission control module (TCM) - processor error

============298==============
P0795(04)
Raw code: 079504
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission fluid pressure (TFP) solenoid C - circuit malfunction

============299==============
P2713(04)
Raw code: 271304
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission fluid pressure (TFP) solenoid D - circuit malfunction

============300==============
P2722(04)
Raw code: 272204
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission fluid pressure (TFP) solenoid E - circuit malfunction

============301==============
P2700(07)
Raw code: 270007
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission friction element A, apply time - range/performance problem

============302==============
P2701(07)
Raw code: 270107
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission friction element B, apply time - range/performance problem

============303==============
P2702(07)
Raw code: 270207
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission friction element C, apply time - range/performance problem

============304==============
P2703(07)
Raw code: 270307
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission friction element D, apply time - range/performance problem

============305==============
P2704(07)
Raw code: 270407
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission friction element E, apply time - range/performance problem

============306==============
P177A(07)
Raw code: 177A07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============307==============
P177C(07)
Raw code: 177C07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============308==============
P177F(07)
Raw code: 177F07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============309==============
P178A(07)
Raw code: 178A07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============310==============
P178B(07)
Raw code: 178B07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============311==============
P177D(07)
Raw code: 177D07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============312==============
P177B(07)
Raw code: 177B07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============313==============
P177E(07)
Raw code: 177E07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============314==============
P178C(07)
Raw code: 178C07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============315==============
P178D(07)
Raw code: 178D07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============316==============
P0731(07)
Raw code: 073107
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear 1 - incorrect ratio

============317==============
P0732(07)
Raw code: 073207
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear 2 - incorrect ratio

============318==============
P0733(07)
Raw code: 073307
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear 3 - incorrect ratio

============319==============
P0734(07)
Raw code: 073407
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear 4 - incorrect ratio

============320==============
P0735(07)
Raw code: 073507
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear 5 - incorrect ratio

============321==============
P0729(07)
Raw code: 072907
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear 6 - incorrect ratio

============322==============
P076F(07)
Raw code: 076F07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission system - gear 7 ratio incorrect

============323==============
P07D9(07)
Raw code: 07D907
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============324==============
P0736(07)
Raw code: 073607
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Reverse gear - incorrect ratio
============325==============
P07DC(07)
Raw code: 07DC07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============326==============
P07DD(07)
Raw code: 07DD07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============327==============
P07DE(07)
Raw code: 07DE07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============328==============
P07DF(07)
Raw code: 07DF07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============329==============
P07E0(07)
Raw code: 07E007
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============330==============
P07E1(07)
Raw code: 07E107
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============331==============
P07E2(07)
Raw code: 07E207
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============332==============
P07E3(07)
Raw code: 07E307
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============333==============
P0562(1C)
Raw code: 05621C
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
System voltage - low

============334==============
P2793(92)
Raw code: 279392
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Gear shift direction - circuit malfunction

============335==============
P0219(86)
Raw code: 021986
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Engine over speed condition

============336==============
P0741(07)
Raw code: 074107
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Torque converter clutch (TCC) solenoid - performance or stuck off

============337==============
C1A88(64)
Raw code: 5A8864
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle

============338==============
P07AD(07)
Raw code: 07AD07
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transmission friction element F - stuck on

============339==============
P0942(07)
Raw code: 094207
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Hydraulic pressure unit

============340==============
P2787(4B)
Raw code: 27874B
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Clutch - temperature too high
============341==============
P2787(98)
Raw code: 278798
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Clutch - temperature too high

============342==============
P0730(00)
Raw code: 073000
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Incorrect gear ratio

============343==============
U0001(86)
Raw code: C00186
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Controller area network (CAN) data bus, high speed bus

============344==============
P1707(74)
Raw code: 170774
ECU: Transmission control unit
Status: Test not completed since last DTC clear, Test not completed during this
operation cycle
Transfer Case Neutral Indicator Hard Fault Present

============345==============
P0693(11)
Raw code: 069311
ECU: Engine control unit
Status: Test failed, Test failed (current drive cycle), Pending, Confirmed, Test
failed since last DTC clear
Engine coolant blower motor 2 - circuit low