Scribd
Upload
2 views

mp1

The document outlines the study and preparation of a single-point cutting tool, detailing its components such as shank, face, flank, base, and nose. It also explains various angles associated with the tool, including back rake angle, side rake angle, end relief angle, and side cutting edge angle. Additionally, it lists the seven elements that define the tool's signature, providing specific angle measurements for each component.

Uploaded by

fakefcc0909
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views

mp1

The document outlines the study and preparation of a single-point cutting tool, detailing its components such as shank, face, flank, base, and nose. It also explains various angles associated with the tool, including back rake angle, side rake angle, end relief angle, and side cutting edge angle. Additionally, it lists the seven elements that define the tool's signature, providing specific angle measurements for each component.

Uploaded by

fakefcc0909
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Aim: -To Study and preparation of the Single point Cutting Tool

A single-point tool is a cutting tool having one cutting part and one shank. They
are
machine
commonly used in lathes, turret lathes, planers, shapers, boring mills and similar
tools. The different part of single point cutting tool are:
Shank: It is a body of tools, which is not Grained is khown as shank.
Face: The surface over the chip of metal side is known as face.

End Face
Cutting Edge

Nose
Shank

Side Cutting
Edge Base
Heel' Side Flank

Flank:
The Cutting tool surface is facing the work metal is known as Flank. There are two types like
as end flank and side flank.
Base: It is a bottom surface of shank. Generally it is having flat farming in naturally

Nose: It is a Junction of side and end of cutting edge is known as nose.


Angle of singte point cutting toot:
End Cuting EdgeAngle

Face
Nosc Nose Radius Shank

Cutting Edge
Back Rake Angle Side Cutting Edge Angle

Síde Rake
Angle
Shank
Lip Àngle

Side Relief Angle -+ Base

End Belíef Anglc SBnd Clearance Angle


The different angle of single point cutting tool are:
Back rake angle:
The angle measured along the plane perpendicular through the side cutting edge in between
the tool face and the perpendicular line to the base.
Side rake angle:
The angle in between the parallel line of the base and the face of the tool that is measured it
the plane perpendicular to the side edge and base.
Endrelief angle:
Relief angle is in between the base perpendicular line and end flank.
The tool slope of the face is measured from the nose and towards rack. If the slope
measured
is downwards then it is negative back
rake.
The slope of the tool face is measured from the cutting edge and if the obtained
slope is
towards the cutting edge the angle is negative side rake.
If the obtained angle is away from the cutting edge then the angle is positive side
rake angle.
The rake angle will be zero if no slope value is obtained
SIDE RELIEF ANGLE:
The portion of side flank that is immediate below to the side cutting edge and the
base
perpendicular line of the cutting tool.
END CUTTING EDGE ANGLE:
End cutting edge angle is in between the perpendicular line of the tool shank and the end
cutting edge.
SIDE CUTTING EDGE ANGLE:
I#is the-angle in between the-side eutting edge and the side of the toot strank. This agte is
also referred as lead angle.
SEVEN ELEMENTSOF SINGLE POINT CUTTING TOOL:

The seven elements that comprise the signature of single point cutting tool are
always stated in the
following order.
TYPICAL TOOL SIGNATURE IS 00 -7° -6°-g°-15°-16° -0.8mm.

1. Back rake angle (0)


2. Side rake angle (79)
3. End relief angle (6)
4. Side relief angle (8°)
5. End cutting edge angle (15°)
6. Side cutting edge angle (16')
7. Nose Radius (,8mm)
1. Back rake angle (0)

8ack-Rake angle

Shank

gas

2. Side rake angle (7")

Sids-Rake ange

3. End relief angle (6°)

Shank

End re l i e gle

4. Side relief angle (2)

Side relief angle

5. End cutting edge angle (15°)


Shank

6. Side cutting edge angle (16)

Shank

Side cuting edge angle

7. Nose radius (.8mm)

Face Shank
Nose
KNose radius

You might also like